Facts and Fictions: Feminist Literary Criticism and Cultural Critique, 1968-2012

"Facts and Fictions: Feminist Literary Criticism and Cultural Critique, 1968-2012" is a critical history of the unfolding of feminist literary study in the US academy. It contributes to current scholarly efforts to revisit the 1970s by reconsidering often-repeated narratives about the critical naivety of feminist literary criticism in its initial articulation. As the story now goes, many of the most prominent feminist thinkers of the period engaged in unsophisticated literary analysis by conflating lived social reality with textual representation when they read works of literature as documentary evidence of real life. As a result, the work of these "bad critics," particularly Kate Millett and Andrea Dworkin, has not been fully accounted for in literary critical terms.

This dissertation returns to Dworkin and Millett's work to argue for a different history of feminist literary criticism. Rather than dismiss their work for its conflation of fact and fiction, I pay attention to the complexity at the heart of it, yielding a new perspective on the history and persistence of the struggle to use literary texts for feminist political ends. Dworkin and Millett established the centrality of reality and representation to the feminist canon debates of "the long 1970s," the sex wars of the 1980s, and the more recent feminist turn to memoir. I read these productive periods in feminist literary criticism from 1968 to 2012 through their varied commitment to literary works.

Chapter One begins with Millett, who de-aestheticized male-authored texts to treat patriarchal literature in relation to culture and ideology. Her mode of literary interpretation was so far afield from the established methods of New Criticism that she was not understood as a literary critic. She was repudiated in the feminist literary criticism that followed her and sought sympathetic methods for reading women's writing. In that decade, the subject of Chapter Two, feminist literary critics began to judge texts on the basis of their ability to accurately depict the reality of women's experiences.

Their vision of the relationship between life and fiction shaped arguments about pornography during the sex wars of the 1980s, the subject of Chapter Three. In this context, Dworkin was feminism's "bad critic." I focus on the literary critical elements of Dworkin's theories of pornographic representation and align her with Millett as a miscategorized literary critic. In the decades following the sex wars, many of the key feminist literary critics of the founding generation (including Dworkin, Jane Gallop, Carolyn Heilbrun, and Millett) wrote memoirs that recounted, largely in experiential terms, the history this dissertation examines. Chapter Four considers the story these memoirists told about the rise and fall of feminist literary criticism. I close with an epilogue on the place of literature in a feminist critical enterprise that has shifted toward privileging theory.

Phylotastic! Making tree-of-life knowledge accessible, reusable and convenient.

BACKGROUND: Scientists rarely reuse expert knowledge of phylogeny, in spite of years of effort to assemble a great "Tree of Life" (ToL). A notable exception involves the use of Phylomatic, which provides tools to generate custom phylogenies from a large, pre-computed, expert phylogeny of plant taxa. This suggests great potential for a more generalized system that, starting with a query consisting of a list of any known species, would rectify non-standard names, identify expert phylogenies containing the implicated taxa, prune away unneeded parts, and supply branch lengths and annotations, resulting in a custom phylogeny suited to the user's needs. Such a system could become a sustainable community resource if implemented as a distributed system of loosely coupled parts that interact through clearly defined interfaces. RESULTS: With the aim of building such a "phylotastic" system, the NESCent Hackathons, Interoperability, Phylogenies (HIP) working group recruited 2 dozen scientist-programmers to a weeklong programming hackathon in June 2012. During the hackathon (and a three-month follow-up period), 5 teams produced designs, implementations, documentation, presentations, and tests including: (1) a generalized scheme for integrating components; (2) proof-of-concept pruners and controllers; (3) a meta-API for taxonomic name resolution services; (4) a system for storing, finding, and retrieving phylogenies using semantic web technologies for data exchange, storage, and querying; (5) an innovative new service, DateLife.org, which synthesizes pre-computed, time-calibrated phylogenies to assign ages to nodes; and (6) demonstration projects. These outcomes are accessible via a public code repository (GitHub.com), a website (http://www.phylotastic.org), and a server image. CONCLUSIONS: Approximately 9 person-months of effort (centered on a software development hackathon) resulted in the design and implementation of proof-of-concept software for 4 core phylotastic components, 3 controllers, and 3 end-user demonstration tools. While these products have substantial limitations, they suggest considerable potential for a distributed system that makes phylogenetic knowledge readily accessible in computable form. Widespread use of phylotastic systems will create an electronic marketplace for sharing phylogenetic knowledge that will spur innovation in other areas of the ToL enterprise, such as annotation of sources and methods and third-party methods of quality assessment.

Physical Activity, Central Adiposity, and Functional Limitations in Community-Dwelling Older Adults.

BACKGROUND AND PURPOSE: Obesity and physical inactivity are independently associated with physical and functional limitations in older adults. The current study examines the impact of physical activity on odds of physical and functional limitations in older adults with central and general obesity. METHODS: Data from 6279 community-dwelling adults aged 60 years or more from the Health and Retirement Study 2006 and 2008 waves were used to calculate prevalence and odds of physical and functional limitation among obese older adults with high waist circumference (waist circumference ≥88 cm in females and ≥102 cm in males) who were physically active versus inactive (engaging in moderate/vigorous activity less than once per week). Logistic regression models were adjusted for age, sex, race/ethnicity, education, smoking status, body mass index, and number of comorbidities. RESULTS: Physical activity was associated with lower odds of physical and functional limitations among older adults with high waist circumference (odds ratio [OR], 0.59; confidence interval [CI], 0.52-0.68, for physical limitations; OR, 0.52; CI, 0.44-0.62, for activities of daily living; and OR, 0.44; CI, 0.39-0.50, for instrumental activities of daily living). CONCLUSIONS: Physical activity is associated with significantly lower odds of physical and functional limitations in obese older adults regardless of how obesity is classified. Additional research is needed to determine whether physical activity moderates long-term physical and functional limitations.

Pneumococcal aetiology and serotype distribution in paediatric community-acquired pneumonia.

Community-acquired pneumonia (CAP) is a major cause of morbidity in children. This study estimated the proportion of children with pneumococcal CAP among children hospitalised with CAP in Belgium and describes the causative serotype distribution after implementation of the 7-valent pneumococcal conjugate vaccine. Children 0-14 years hospitalised with X-ray-confirmed CAP were prospectively enrolled in a multicentre observational study. Acute and convalescent blood samples were collected. Pneumococcal aetiology was assessed by conventional methods (blood or pleural fluid cultures with Quellung reaction capsular typing or polymerase chain reaction [PCR] in pleural fluid), and recently developed methods (real-time PCR in blood and World Health Organization-validated serotype-specific serology). A total of 561 children were enrolled. Pneumococcal aetiology was assessed by conventional methods in 539, serology in 171, and real-time PCR in blood in 154. Pneumococcal aetiology was identified in 12.2% (66/539) of the children by conventional methods alone but in 73.9% by the combination of conventional and recently developed methods. The pneumococcal detection rate adjusted for the whole study population was 61.7%. Serotypes 1 (42.3%), 5 (16.0%), and 7F(7A) (12.8%) were predominant. In conclusion, Streptococcus pneumoniae remains the predominant bacteria in children hospitalised for CAP in Belgium after implementation of 7-valent pneumococcal conjugate vaccine, with non-vaccine-serotypes accounting for the majority of cases. The use of recently developed methods improves diagnosis of pneumococcal aetiology.

Epidemiological study of oesophageal and gastric cancer in south-east England

Background: This epidemiological study was carried out to establish the magnitude of the changing incidence of gastric and oesophageal cancer. Methods: Time-trend analyses of subsite-specific cancers of the oesophagus and stomach were performed using data from the Thames Cancer Registry database (1960-1996) for the South Thames Region. The changes in sex ratio and peak age of incidence are reported. Results: In the upper two-thirds of the oesophagus there was no significant change in the incidence rate, but the lower third of the oesophagus showed a marked rise for both sexes (average annual change + 0.05 for men, + 0.009 for women). For the gastric cardia, the incidence in males increased (average annual change + 0.025), while in females it remained unchanged. Cancers of the oesophagogastric junction showed a clear increase for both sexes (average annual change + 0.07 for men, + 0.009 for women). There were changes in the sex ratio and peak age of incidence for all subsite cancers for both sexes. Conclusion: Over a 37-year period the incidence of cancer of the oesophagogastric junction increased threefold, while the incidence of cancers of the other subsites of the stomach decreased. Further studies are needed to investigate the aetiology of these changes.

Evaluating the effectiveness of Z: The claims made about CICS and where we go from here

There have been few genuine success stories about industrial use of formal methods. Perhaps the best known and most celebrated is the use of Z by IBM (in collaboration with Oxford University's Programming Research Group) during the development of CICS/ESA (version 3.1). This work was rewarded with the prestigious Queen's Award for Technological Achievement in 1992 and is especially notable for two reasons: 1) because it is a commercial, rather than safety- or security-critical, system and 2) because the claims made about the effectiveness of Z are quantitative as well as qualitative. The most widely publicized claims are: less than half the normal number of customer-reported errors and a 9% savings in the total development costs of the release. This paper provides an independent assessment of the effectiveness of using Z on CICS based on the set of public domain documents. Using this evidence, we believe that the case study was important and valuable, but that the quantitative claims have not been substantiated. The intellectual arguments and rationale for formal methods are attractive, but their widespread commercial use is ultimately dependent upon more convincing quantitative demonstrations of effectiveness. Despite the pioneering efforts of IBM and PRG, there is still a need for rigorous, measurement-based case studies to assess when and how the methods are most effective. We describe how future similar case studies could be improved so that the results are more rigorous and conclusive.

Scheduling batches with sequential job processing for two-machine flow and open shops

In this paper, we study a problem of scheduling and batching on two machines in a flow-shop and open-shop environment. Each machine processes operations in batches, and the processing time of a batch is the sum of the processing times of the operations in that batch. A setup time, which depends only on the machine, is required before a batch is processed on a machine, and all jobs in a batch remain at the machine until the entire batch is processed. The aim is to make batching and sequencing decisions, which specify a partition of the jobs into batches on each machine, and a processing order of the batches on each machine, respectively, so that the makespan is minimized. The flow-shop problem is shown to be strongly NP-hard. We demonstrate that there is an optimal solution with the same batches on the two machines; we refer to these as consistent batches. A heuristic is developed that selects the best schedule among several with one, two, or three consistent batches, and is shown to have a worst-case performance ratio of 4/3. For the open-shop, we show that the problem is NP-hard in the ordinary sense. By proving the existence of an optimal solution with one, two or three consistent batches, a close relationship is established with the problem of scheduling two or three identical parallel machines to minimize the makespan. This allows a pseudo-polynomial algorithm to be derived, and various heuristic methods to be suggested.

Investigation of the cold crucible melting process: experimental and numerical study

The dynamic process of melting different materials in a cold crucible is being studied experimentally with parallel numerical modelling work. The numerical simulation uses a variety of complementing models: finite volume, integral equation and pseudo-spectral methods combined to achieve the accurate description of the dynamic melting process. Results show the temperature history of the melting process with a comparison of the experimental and computed heat losses in the various parts of the equipment. The free surface visual observations are compared to the numerically predicted surface shapes.

A generic time and space accurate numerical approach to closely coupled fluid-structure interaction problems

Fluid structure interaction, as applied to flexible structures, has wide application in diverse areas such as flutter in aircraft, flow in elastic pipes and blood vessels and extrusion of metals through dies. However a comprehensive computational model of these multi-physics phenomena is a considerable challenge. Until recently work in this area focused on one phenomenon and represented the behaviour of the other more simply even to the extent in metal forming, for example, that the deformation of the die is totally ignored. More recently, strategies for solving the full coupling between the fluid and soild mechanics behaviour have developed. Conventionally, the computational modelling of fluid structure interaction is problematical since computational fluid dynamics (CFD) is solved using finite volume (FV) methods and computational structural mechanics (CSM) is based entirely on finite element (FE) methods. In the past the concurrent, but rather disparate, development paths for the finite element and finite volume methods have resulted in numerical software tools for CFD and CSM that are different in almost every respect. Hence, progress is frustrated in modelling the emerging multi-physics problem of fluid structure interaction in a consistent manner. Unless the fluid-structure coupling is either one way, very weak or both, transferring and filtering data from one mesh and solution procedure to another may lead to significant problems in computational convergence. Using a novel three phase technique the full interaction between the fluid and the dynamic structural response are represented. The procedure is demonstrated on some challenging applications in complex three dimensional geometries involving aircraft flutter, metal forming and blood flow in arteries.

No-flow underfill flip chip assembly–an experimental and modeling analysis

In the flip-chip assembly process, no-flow underfill materials have a particular advantage over traditional underfill: the application and curing of the former can be undertaken before and during the reflow process. This advantage can be exploited to increase the flip-chip manufacturing throughput. However, adopting a no-flow underfill process may introduce reliability issues such as underfill entrapment, delamination at interfaces between underfill and other materials, and lower solder joint fatigue life. This paper presents an analysis on the assembly and the reliability of flip-chips with no-flow underfill. The methodology adopted in the work is a combination of experimental and computer-modeling methods. Two types of no-flow underfill materials have been used for the flip chips. The samples have been inspected with X-ray and scanning acoustic microscope inspection systems to find voids and other defects. Eleven samples for each type of underfill material have been subjected to thermal shock test and the number of cycles to failure for these flip chips have been found. In the computer modeling part of the work, a comprehensive parametric study has provided details on the relationship between the material properties and reliability, and on how underfill entrapment may affect the thermal–mechanical fatigue life of flip chips with no-flow underfill.

Heat and mass transfer in two-phase porous materials under intensive microwave heating

Computational results for the intensive microwave heating of porous materials are presented in this work. A multi-phase porous media model has been developed to predict the heating mechanism. Combined finite difference time-domain and finite volume methods were used to solve equations that describe the electromagnetic field and heat and mass transfer in porous media. The coupling between the two schemes is through a change in dielectric properties which were assumed to be dependent both on temperature and moisture content. The model was able to reflect the evolution of both temperature and moisture fields as well as energy penetration as the moisture in the porous medium evaporates. Moisture movement results from internal pressure gradients produced by the internal heating and phase change.

Fatal impact? The effects of emotional arousal and weapon presence on police officers' memories for a simulated crime

Purpose. (1) To investigate the effects of emotional arousal and weapon presence on the completeness and accuracy of police officers' memories; and (2) to better simulate the experience of witnessing a shooting and providing testimony. Methods. A firearms training simulator was used to present 70 experienced police officers with either a shooting or a domestic dispute scenario containing no weapons. Arousal was measured using both self-report and physiological indices. Recall for event details was tested after a 10-minute delay using a structured interview. Identification accuracy was assessed with a photographic line-up. Results. Self-report measures confirmed that the shooting induced greater arousal than did the other scenario. Overall, officers' memories for the event were less complete, but more accurate, when they had witnessed the shooting. The recall and line-up data did not support a weapon focus effect. Conclusions. Police officers' recall performance can be affected both qualitatively and quantitatively by witnessing an arousing event such as a shooting.

A sound and complete reified temporal logic

There are mainly two known approaches to the representation of temporal information in Computer Science: modal logic approaches (including tense logics and hybrid temporal logics) and predicate logic approaches (including temporal argument methods and reified temporal logics). On one hand, while tense logics, hybrid temporal logics and temporal argument methods enjoy formal theoretical foundations, their expressiveness has been criticised as not power enough for representing general temporal knowledge; on the other hand, although current reified temporal logics provide greater expressive power, most of them lack of complete and sound axiomatic theories. In this paper, we propose a new reified temporal logic with a clear syntax and semantics in terms of a sound and complete axiomatic formalism which retains all the expressive power of the approach of temporal reification.

Application of regularization methods to damage detection in large scale plane frame structures using incomplete noisy modal data

This paper presents an approach for detecting local damage in large scale frame structures by utilizing regularization methods for ill-posed problems. A direct relationship between the change in stiffness caused by local damage and the measured modal data for the damaged structure is developed, based on the perturbation method for structural dynamic systems. Thus, the measured incomplete modal data can be directly adopted in damage identification without requiring model reduction techniques, and common regularization methods could be effectively employed to solve the developed equations. Damage indicators are appropriately chosen to reflect both the location and severity of local damage in individual components of frame structures such as in brace members and at beam-column joints. The Truncated Singular Value Decomposition solution incorporating the Generalized Cross Validation method is introduced to evaluate the damage indicators for the cases when realistic errors exist in modal data measurements. Results for a 16-story building model structure show that structural damage can be correctly identified at detailed level using only limited information on the measured noisy modal data for the damaged structure.

Bridging the gap with teamwork: collaborative leadership for communities of practice in the learning and skills sector

Collaborative approaches in leadership and management are increasingly acknowledged to play a key role in successful institutions in the learning and skills sector (LSS) (Ofsted, 2004). Such approaches may be important in bridging the potential 'distance' (psychological, cultural, interactional and geographical) (Collinson, 2005) that may exist between 'leaders' and 'followers', fostering more democratic communal solidarity. This paper reports on a 2006-07 research project funded by the Centre for Excellence in Leadership (CEL) that aimed to collect and analyse data on 'collaborative leadership' (CL) in the learning and skills sector. The project investigated collaborative leadership and its potential for benefiting staff through trust and knowledge-sharing in communities of practice (CoPs). The project forms part of longer-term educational research investigating leadership in a collaborative inquiry process (Jameson et al., 2006). The research examined the potential for CL to benefit institutions, analysing respondents' understanding of and resistance to collaborative practices. Quantitative and qualitative data from senior managers and lecturers was analysed using electronic data in SPSS and Tropes Zoom. The project aimed to recommend systems and practices for more inclusive, diverse leadership (Lumby et al., 2005). Collaborative leadership has increasingly gained international prominence as emphasis shifted towards team leadership beyond zero-sum 'leadership'/ 'followership' polarities into more mature conceptions of shared leadership spaces, within which synergistic leadership spaces can be mediated. The relevance of collaboration within the LSS has been highlighted following a spate of recent government-driven policy developments in FE. The promotion of CL addresses concerns about the apparent 'remoteness' of some senior managers, and the 'neo-management' control of professionals which can increase 'distance' between leaders and 'followers' and may de-professionalise staff in an already disempowered sector. Positive benefit from 'collaborative advantage' tends to be assumed in idealistic interpretations of CL, but potential 'collaborative inertia' may be problematic in a sector characterised by rapid top-down policy changes and continuous external audit and surveillance. Constant pressure for achievement against goals leaves little time for democratic group negotiations, despite the desires of leaders to create a more collaborative ethos. Yet prior models of intentional communities of practice potentially offer promise for CL practice to improve group performance despite multiple constraints. The CAMEL CoP model (JISC infoNet, 2006) was linked to the project, providing one practical way of implementing CL within situated professional networks.The project found that a good understanding of CL was demonstrated by most respondents, who thought it could enable staff to share power and work in partnership to build trust and conjoin skills, abilities and experience to achieve common goals for the good of the sector. However, although most respondents expressed agreement with the concept and ideals of CL, many thought this was currently an idealistically democratic, unachievable pipe dream in the LSS. Many respondents expressed concerns with the 'audit culture' and authoritarian management structures in FE. While there was a strong desire to see greater levels of implementation of CL, and 'collaborative advantage' from the 'knowledge sharing benefit potential' of team leadership, respondents also strongly advised against the pitfalls of 'collaborative inertia'. A 'distance' between senior leadership views and those of staff lower down the hierarchy regarding aspects of leadership performance in the sector was reported. Finally, the project found that more research is needed to investigate CL and develop innovative methods of practical implementation within autonomous communities of professional practice.