Different methods of cutting fluid application on turning of a difficult-to-machine steel

Different methods of cutting fluid application are used on turning of a difficult-tomachine steel (SAE EV-8). A semi-synthetic cutting fluid was applied using a conventional method, minimum quantity of cutting fluid (MQCF), and pulverization. By the minimum quantity method was also applied a lubricant of vegetable oil (MQL). Thereafter, a cutting fluid jet under high pressure (3.0 MPa) was singly applied in the following regions: chip-tool interface; top surface of the chip; and tool-workpiece contact. Two other methods were used: an interflow between conventional application and chip-tool interface jet and, finally, three jets simultaneously applied. In order to carry out these tests, it was necessary to set up a high pressure system using a piston pump for generating a cutting fluid jet, a Venturi for fluid application (MQCF and MQL), and a nozzle for cutting fluid pulverization. The output variables analyzed included tool life, surface roughness, cutting tool temperature, cutting force, chip form, chip compression rate and machined specimen microstructure. It can be observed that the tool life increases and the cutting force decreases with the application of cutting fluid jet, mainly when it is directed to the chip-tool interface. Excluding the methods involving jet fluid, the conventional method seems to be more efficient than other methods of low pressure. © (2013) Trans Tech Publications, Switzerland.

Filamentous fungi vectored by ants (Hymenoptera: Formicidae) in a public hospital in north-eastern Brazil

Background: The increase in opportunistic fungal infections has led to the search for putative sources of contamination in hospital environments. Aim: Ants in a public hospital in Itabuna, north-eastern Brazil were examined for carriage of filamentous fungi. Methods: During a year-long survey, ants from different hospital areas were sampled. Preference was given to locations where it was possible to observe ants actively foraging. The fungi found on the ants' integument were cultured and identified. Findings: A total of 106 ant workers belonging to 12 species in 11 genera were collected. A total of 47 fungal strains was isolated from 40% of the ants (. N = 42). We found 16 fungal species in 13 genera associated with the ant workers. The prevalent fungal genera were . Aspergillus, . Purpureocillium and . Fusarium. The ants . Tapinoma melanocephalum, . Paratrechina longicornis and . Pheidole megacephala were associated with six fungal genera; and four genera of fungi were associated with . Solenopsis saevissima workers. Fungal diversity was higher in the following hospital areas: nursery, hospital beds, breastmilk bank and paediatrics. Conclusion: Ants act as carriers of soil and airborne fungal species, and ant control in hospital areas is necessary to prevent the dissemination of such micro-organisms. © 2012 The Healthcare Infection Society.

The usable leftover one-dimensional cutting stock problem-a priority-in-use heuristic

We consider a one-dimensional cutting stock problem in which the material not used in the cutting patterns, if large enough, is kept for use in the future. Moreover, it is assumed that leftovers should not remain in stock for a long time, hence, such leftovers have priority-in-use compared to standard objects (objects bought by the industry) in stock. A heuristic procedure is proposed for this problem, and its performance is analyzed by solving randomly generated dynamic instances where successive problems are solved in a time horizon. For each period, new demands arise and a new problem is solved on the basis of the information about the stock of the previous periods (remaining standard objects in the stock) and usable leftovers generated during those previous periods. The computational experiments show that the solutions presented by the proposed heuristic are better than the solutions obtained by other heuristics from the literature. © 2012 The Authors. International Transactions in Operational Research © 2012 International Federation of Operational Research Societies.

Influence of air abrasion tips and operation modes on enamel-cutting characteristics

Objective: To assess the influence of air abrasion tips and system operation modes on enamel cutting. Methods: Forty bovine teeth were abraded with the air abrasion system Mach 4.1 for 10 and 15 seconds, employing conventional and sonic tips of 0.45-mm inner diameter and a 90° angle, and 27.5-μm aluminum oxide at 5.51 bar air pressure in continuous and pulsed modes. The width and depth of the resulting cuts were measured in SEM. Results: The multivariate analysis of variances revealed that, compared to the sonic tip, the conventional tip produced shallower cuts independent of the operation mode and the application period. Conclusions: The cutting patterns observed in this study suggest that the pulsed mode produced deeper cuts when both the conventional and sonic tips were used, and that the sonic tip cut more dental tissue than the conventional one.

Morphological and Genomic Differences Between Cutting and Racing Lines of Quarter Horses

To investigate morphological and genomic differences between cutting and racing lines of Quarter Horses, 120 racing and 68 cutting animals of both sexes, registered at the Brazilian Association of Quarter Horse Breeders, were used. Blood samples were collected, and the following physical traits were measured: weight; height at withers; body length; length of the shank, pastern, rump, head, and neck; and chest, shank, and hoof circumference. For analysis of genomic differences, 54,602 single-nucleotide polymorphisms (SNPs) were genotyped using the Equine SNP50 BeadChip, and the quality of individual and SNP genotype data were evaluated. The fixation index, FST, was used to identify genome regions that were altered in the lines by selection. The results showed significant differences between the lines in all physical traits. Quality control led to the exclusion of four cutting animals with a call rate of <0.95. After filtering, 12,544, 13,815, and 13,370 SNPs were excluded for the whole population (n = 184), the 120 racing animals, and the 64 cutting animals, respectively. The number of informative polymorphisms detected in each line and in the whole population indicated that the Equine SNP50 BeadChip can be used in genetic studies of Quarter Horses. The fixation index, FST, identified 2,558 genome regions that may have been modified by divergent selection. © 2013 Elsevier Inc.

Anti-Candida properties of urauchimycins from actinobacteria associated with Trachymyrmex ants

After decades of intensive searching for antimicrobial compounds derived from actinobacteria, the frequency of isolation of new molecules has decreased. To cope with this concern, studies have focused on the exploitation of actinobacteria from unexplored environments and actinobacteria symbionts of plants and animals. In this study, twenty-four actinobacteria strains isolated from workers of Trachymyrmex ants were evaluated for antifungal activity towards a variety of Candida species. Results revealed that seven strains inhibited the tested Candida species. Streptomyces sp. TD025 presented potent and broad spectrum of inhibition of Candida and was selected for the isolation of bioactive molecules. From liquid shake culture of this bacterium, we isolated the rare antimycin urauchimycins A and B. For the first time, these molecules were evaluated for antifungal activity against medically important Candida species. Both antimycins showed antifungal activity, especially urauchimycin B. This compound inhibited the growth of all Candida species tested, with minimum inhibitory concentration values equivalent to the antifungal nystatin. Our results concur with the predictions that the attine ant-microbe symbiosis may be a source of bioactive metabolites for biotechnology and medical applications. © 2013 Thais D. Mendes et al.

A metabolic pathway assembled by enzyme selection may support herbivory of leaf-cutter ants on plant starch

Mutualistic associations shape the evolution in different organism groups. The association between the leaf-cutter ant Atta sexdens and the basidiomycete fungus Leucoagaricus gongylophorus has enabled them to degrade starch from plant material generating glucose, which is a major food source for both mutualists. Starch degradation is promoted by enzymes contained in the fecal fluid that ants deposit on the fungus culture in cut leaves inside the nests. To understand the dynamics of starch degradation in ant nests, we purified and characterized starch degrading enzymes from the ant fecal fluid and from laboratory cultures of L. gongylophorus and found that the ants intestine positively selects fungal α-amylase and a maltase likely produced by the ants, as a negative selection is imposed to fungal maltase and ant α-amylases. Selected enzymes are more resistant to catabolic repression by glucose and proposed to structure a metabolic pathway in which the fungal α-amylase initiates starch catalysis to generate byproducts which are sequentially degraded by the maltase to produce glucose. The pathway is responsible for effective degradation of starch and proposed to represent a major evolutionary innovation enabling efficient starch assimilation from plant material by leaf-cutters. © 2013 Elsevier Ltd.

Influência do ambiente no desenvolvimento de colônias iniciais de formigas cortadeiras (Atta sexdens rubropilosa)

Annually, mature colonies of Atta ants produce winged males and females, where leave the colony in which they were produced to form new colonies and thus continue the species perpetuation. The foundation of Atta spp. colonies always involves high queen effort, solely responsible for growing the fungus and the care with itself and its offspring. During the foundation there is consumption of body reserves. This study investigated how the environment influences the development of newly founded colonies of leaf cutting ant, Atta sexdens rubropilosa. Therefore, it was compared field colonies collected five months after the nuptial flight and colonies maintained in the laboratory since the nuptial flight. It was analyzed the weight and size of the population (number of workers, larvae, pupae and eggs), the workers size, the volume and weight of the fungus garden and queen effort for the nest foundation (lipid content and weight of queens). In comparison to the field colonies, the laboratory colonies showed higher values in the weight and size of population, the volume and weight of the fungus garden. Measures of workers by class size did not vary between colonies from field and laboratory. The queen effort for nest foundation was higher in field colonies, which showed a lower percentage of fat and lower weight compared to laboratory colonies. These results show that the environment has a strong influence on the colonies development during the foundation, as well as on the physiological status of the queens, and therefore the survival, development and success of the colony, it is a reflection of the queen efforts and of the environment conditions.

The integrated lot sizing and cutting stock problem in a furniture factory

This work studies the integrated lot sizing and cutting stock problem, where the goal is to capture the dependency that exists between two important decisions in the production process, in order to economize raw materials and also reduce production and inventory costs. The integrated lot sizing and cutting stock problem is studied in a small furniture factory that produces wardrobes, dressing tables and cupboards and the lot sizing and cutting stock decisions are taken by the production manager. A column-generation technique is used to solve a linear relaxation of the proposed model. The computational results, using real data from the factory, show that it is possible to reduce total inventory and raw material costs when integrated planning is used. © 2013 IFAC.

Yield and mineral nutrition of soybean, maize, and congo signal grass as affected by limestone and slag

The objective of this work was to evaluate the efficiency of superficial applicationof limestone and slag, and their effects on soil chemical attributes and on yield and mineral nutrition of soybean, maize, and Congo signal grass (Urochloa ruziziensis). The experiment was carried out in a Rhodic Hapludox under no tillage system. The treatments consisted of the use of limestone or slag (silicates of calcium and magnesium) to correct soilacidity, and of a control treatment without the use of soil correctives. Rates were calculated in order to raise soil base saturation up to 70%. Soybean was sown in November 2006and maize in December 2007. Congo signal grass was sown right after the harvests of soybean and maize, and it was cropped during the offseasons. Soil chemical attributes were evaluated at 6, 12, and 18 months after the application of the corrective materials. Slag isan efficient source for soil acidity correction, being able to raise the exchangeable base levels in the soil profile faster than lime. Both limestone and slag increase dry matter yield of Congo signal grass, and grain yield of soybean and maize. Slag is more effective in improving maize grain yield.

Comportamento de cuidado da prole da saúva-limão Atta sexdens rubropilosa Forel, 1908 (Hymenoptera, formicidae)

Pós-graduação em Ciências Biológicas (Zoologia) - IBRC

Leveduras isoladas de ninhos de formigas da tribo Attini (Hymeniptera: Formicidae)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Características quanti-qualitativas da silagem de milho no sistema de integração lavoura-pecuária

Pós-graduação em Zootecnia - FMVZ

Avaliação agronômica de fontes e doses de fósforo para o capim-Tifton 85

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Extrato metanólico de folhas de mandioca como alternativa ao controle da lagarta-do-cartucho e de formigas cortadeiras

The objective of this study was to characterize phenolic compounds and evaluate the effect, under laboratory conditions, of the cassava leaf powder methanol extract on the development of fall armyworm Spodoptera frugiperda and of leaf-cutting ant Atta sexdens rubropilosa. The extract was incorporated into an artificial diet, to which the armyworm was exposed, at concentrations of 250, 500, 1000 and 1500 mg kg-1,in order to evaluate biological characteristics. Soon after the insects emergence, another experiment was conducted to verify the possible sub lethal activity of the extract; therefore, S. frugiperda couples were isolated in cages and eggs were collected and counted. The Manihot esculenta Crantz extract caused a reduction in the percentage of armyworm survival, as well as in the eggs number. Then, the same extract was solubilized in 10% ethanol and applied to ants; mortality was observed, compared to the control. It is possible to conclude that the M. esculenta Crantz leaf powder methanolic extract, containing gallic acid and catechin, is a promising alternative to control S. frugiperda and Atta sexdens rubropilosa.