Origin, development and evolutionary model of shelf desertization environment in late stage of Upper Pleistocene

Based on the study of palaeo-environmental evolution in the shelves of the Eastern China Seas, the concept of ''shelf desertization'' in the late stage of Upper Pleistocene is defined; the environmental background and evolutionary process of shelf desertization are analysed. Study on the records of subbottom profiling and the data of core samples from shelf areas revealed that during low sea-level stages, the sedimentary environment in the exposed shelf plains was dominated by aeolian depositional process under cold and dry climatic conditions, i.e. under the action of strong winter-monsoon winds. Parts of the exposed marine strata were disintegrated, and aeolian sand dunes were formed on the disintegrated marine deposits, from which the finer sediment grains were blown away by wind and deposited in the downwind areas to form the derivative loess deposits. Thus a desertization environmental system was formed in the exposed shelf plains of the Eastern China Seas.

Geochemical character and material source of sediments in the eastern Philippine Sea

Based upon analyses of grain-size, rare earth element (REE) compositions, elemental occurrence phases of REE, and U-series isotopic dating, the sediment characteristics and material sources of the study area were examined for the recently formed deep-sea clays in the eastern Philippine Sea. The analytical results are summarized as follows. (1) Low accumulation rate, poor sorting and roundness, and high contents of grains coarser than fine silt indicate relatively low sediment input, with localized material source without long distance transport. (2) The REE Contents are relatively high. Shale-normalized patterns of REE indicate weak enrichment in heavy REE (HREE), Ce-passive anomaly, and Eu-positive anomaly. (3) Elemental occurrence phases of REE between the sediments with and without crust are similar. REE mainly concentrate in residual phase and then in ferromanganese oxide phase. The light REE (LREE) enrichment, Ce-positive anomaly, and Eu-positive anomaly occur in residual phase. Ferromanganese oxide phase shows the characteristics of relatively high HREE content and Ce-passive anomaly. (4) There are differences in each above mentioned aspect between the sediments with and without ferromanganese crust. (5) Synthesizing the above characteristics and source discriminant analysis, the study sediments are deduced to mainly result from the alteration of local and nearby volcanic materials. Continental materials transported by wind and/or river (ocean) flows also have minor contributions.

A preliminary study on fingerprinting approach in marine sediment dynamics with the rare earth elements

Locating the quantitized natural sediment fingerprints is an important work for marine sediment dynamics study. The total of 146 sediment samples were collected from the Shelf of the East China Sea and five rivers, including Huanghe (Yellow), Changjiang (Yangtze), Qiantang, Ou and Min River. The sediment grain size and the contents of rare earth elements (REEs) were measured with laser particle size analyzer and ICP-MS technology. The results show that absolute REE content (Sigma REE) and the concentration ratio of light REEs to heavy REEs (L/HREE) are different in the sediments among those rivers. There are higher REE contents in being less than 2 m and 2-31 mu m fractions in the Changjiang Estuary surface sediments. The REE contents of bulk sediment are dominated by the corresponding values of those leading size-fractions. Sigma REE of sediment is higher close to the estuaries and declines seaward on the inner shelf of the East China Sea (ECS). The L/HREE ratio has a tendency of increase southward from 28 degrees N. Hydrodynamic conditions plays a predominate role on spacial distributions of the surficial sediment's REE parameters. In some situations, the currents tend to remove the coarser light grains from initial populations, as well as the deposit of the finer heavy mineral grains. In other situations, the currents will change the ratio of sediment constituents, such as ratio between silts and clays in the sediments. As a result, the various values of Sigma REE or L/HREE ratio in different bulk sediments are more affected by the change of size-fractions than source location. Under the long-term stable hydrodynamic environment, i.e., the East China Sea Shelf, new sediment transport model based on the size and density gradation concept may help to understand the spatial distribution patterns of REE parameters.

Embryology of Swertia cincta (Gentianaceae) and Its Systematic Value

This paper reports the mega-, micro-sporogenesis and female-, male-gametogenesis of Swertia cincta for the first time, with the aim of discussing the systematic position of section Platynema and section Ophelia of Swertia. Anthers are tetrasporangiate. The development of anther walls conforms to the dicotyledonous type. The tapetum cells have dual origin and are similar to the glandular type. There are two middle layers. The endothecium and epidermis persist. Cytokinesis in the microsporrocyte meiosis is simultaneous type and the microscpore teads are tetrahedral. Pollen grains are 3-celled. The ovary is bicarpellum and unilocular. The placentation is of suparietal placentation with 12 series of ovules. The ovules. The ovule is unitegmic, tenuinucellar and ana-campylotropous, The embryo sac orignates from the single-archesporial cell. The one chalazal megaspore in lienar tetrad become the functional megasore. The development of embryo sac is of the polygonum type. Before fertilization, two polar nuclei fuse into one secondary nucleus. Three antipodal cells persisted and divided into 5-8 cells. A comparison between two sections indicates that section Plathnema is better treated as distinct section and is more advanced than section Ophelia according to the evolutionary trends of embryological characters.

Embryology of Swertia (Gentianaceae) relative to taxonomy

The embryological features of three species of Swertia (s.l.) - S. erythrosticta, S. franchetiana, and S. tetraptera were characterized, and the observations were used, together with previously gathered data on other species, to evaluate a recently proposed polyphyly, based on molecular data, of Swertia s.l. Comparisons of species within the genus showed that they have diversified embryologically, and there are significant between-species differences. Notable features that vary between species include the number of cell layers that form the anther locule wall, the construction of the wall of the mature anther, tapetum origin, the cell number in mature pollen grains, the structure of the fused margins of the two carpels, the ovule numbers in placental cross-sections, the shape of the mature embryo sac, the degree of ovule curvature, antipodal variation and the presence of a hypostase, and seed appendages. They share characters that are widely distributed in the tribe Gentianeae, such as a dicotyledonous type of anther wall formation, a glandular tapetum with uninucleate cells, simultaneous cytokinesis following the meiosis of the microsporocytes, tetrahedral microspore tetrads, superior, bicarpellary and unilocular ovaries, unitegmic and tenuinucellar ovules, Polygonum-type megagametophytes, progamous fertilization, nuclear endosperm, and Solanad-type embryogeny. The presence of variation in embryological characters amongst the species of Swertia s.l. strongly supports the view that Swertia s.l. is not a monophyletic group. Frasera is better separated from Swertia s.l. as an independent genus, and is only distantly related to Swertia s. s. judging from the numerous differences in embryology. Swertia tetraptera is very closely related to Halenia, as they show identical embryology. (C) 2007 The Linnean Society of London, Botanical Journal of the Linnean Society, 2007, 155, 383-400.

Floral closure in response to temperature and pollination in Gentiana straminea Maxim. (Gentianaceae), an alpine perennial in the Qinghai-Tibetan Plateau

Floral closure may be induced by pollination and various other factors, but is rarely studied comprehensively. Different kinds of floral closure should have various effects on reproductive fitness of plants. Two contrasting types of floral closure were observed in the flowers of Gentiana straminea Maxim. in the eastern Qinghai-Tibetan Plateau. The first type occurred prior to pollination during both gender phases, in response mainly to decreasing air temperatures. Flowers closed when decreasing temperatures approached 20 degrees C and subsequently began to reopen the following day during mid-morning when air temperatures warmed to approximately 13-15 degrees C. This kind of floral closure can protect pollen grains on either stamens or stigmas, increasing fitness of both male and female. Following pollination, permanent floral closure occurred, although there was a delay between the dates of pollination and permanent closure, during which flowers continued to show temporary closure in response to low temperature episodes. The time required for permanent, pollination-induced closure varied according to the age of the gender phase, including a prolonged time before closure if pollination occurred early in the female phase. The retaining of permanent closed flowers increased both approaching (to inflorescences) and visiting (to unpollinated flowers) frequencies of individual plants when with fewer open flowers and the persisting corolla is further beneficial for seed sets of these pollinated flowers. Thus, two separate types of floral closure, one in response to environmental cues and the other in response to the age of each gender stage, appeared to have a strong influence on reproductive fitness in this species. These results revealed a different adaptive strategy of alpine plants in the sexual reproduction assurance in addition to the well-known elevated floral longevity, dominant role of more effective pollinators and increased reproduction allocation in the arid habitats.

末次冰盛期以来中国东部沙地空间分布特征及环境记录

The latest two extreme scenarios of last glacial maximum and Holocene climatic optimum marked extreme situations in China. This paper aims to reconstruct the fossil extensions and paleoclimate of deserts in eastern China during this typical period. Aeolian sequence responds the climate change by virtue of alternation of aeolian sand layer and sandy soil layer, which correspond aridity and humidity, respectively. There is a set of contrastive deposits made up of loose sand layer and overlying dark sandy soil below land surface. This developed soil and underlying deep aeolian sand respond to H.O. and late last glacial, i.e. LGM. The typical bottom sand layers of about 50 profiles of Hulun Buir Desert, Horqin Desert and Otindag Desert were dated using OSL to confirm that they did deposid in LGM. Based on the locations of these LGM sand, distrution of gobi-desert-loess and landform control, the distribution in LGM of the three deserts were reconstructed. For the block of eastern mountain, the extreme eastern boundary of Hulun Buir Desert and Otindag Desert are not just functioned by climate background. The east of Horqin Desert is plain, hence eastern boundary of this desert is maily controlled by climate. It is considered that quite a lot of aeolian sand of LGM origined from fluvial deposit by observing regional distribution of river and SEM of sand grains. The environment alternation of of LGM-H.O. is featured by extensive expanse of active dune in LGM and grassland in H.O. Combined grain-size, susceptibility, TOC, colour and SEM measurement, the OSL chronology of relatively continued profiles since LGM of the three deserts are divided into four periods: eolian sand (15-10ka)- sandy soil (10-5ka)- alternation of black sand and yellow sand- reworking of LGM sand as destroy of soil.

塔里木盆地塔中—巴楚地区早二叠世岩浆岩地球化学特征及其成因

Tazhong-Bachu region is located in the Western Tarim basin.The early Permian magmatic rocks occur in the earth surface of Tazhong-Bachu region are mainly distributed in Kepintag,Mazhartag and Wajilitag region. There are a lot of wells, in which researchers found the early Permian magmatic rocks,in desert cover area.Most magmatic rocks are basic rocks, a few of which are ultrabasic rocks and intermediate-acid magmatic rocks.The ultrabasic rocks are are mainly occur in the Cryptoexplosive Breccia Pipes ,which is located in the volcanic complex body of Wajilitag region.The basic rocks can be divided into three rock types：The first type of the magmatic rocks in Tazhong-Bachu region is volcanic rock ,which occurs in the Lower Permian Kupukuziman Formation and Kaipaizileike Formation. Most Volcanic rocks are basalts,a few of which are volcanic breccias and pyroclastic rocks.The basalts are distributed in stratiform occurrences and interbeded the clastic rocks in Kepintag region.The attitudes of the basalts are nearly horizontal.Columnar Joints, gas pore textures and amygdaloidal structure are to develop in basalts.The second type of the magmatic rocks in Tazhong-Bachu region is diabase,which occurs in Mazhartag region.Diabase dike swarms occur in the stratums of Silurian, Devonian, Carboniferous and Lower Permian.They make from NNW direction to SSE direction, the obliquity of stratum is greater than 60°, and the dike thickness is form several cm to several meters. Diabasic texture is found in the rocks .The first type of the magmatic rocks in Tazhong-Bachu region are gabbro- pyroxenite rocks ,which occur in the Wajilitag igneous complex body. The intermediate-acid magmatic rocks, which are mainly syenites, are located in Mazhartag and Wajiltag region. But they are small in the whole Tazhong-Bachu region.There are intermediate-acid magmatic rocks,which are mainly dacite,in the northeast part of the wells in Tazhong-Bachu region.But ,it is not found in earth surface.Through systematical geochemical research of early Permian magmatic rocks,which are distributed in Kepintag,Mazhartag, Wajilitag region and the wells such as F1 well、Z1 well、Z13 well、TZ18 well、H3 well、H4 well et al., the focus on the geochronologic characteristics, the main element,trace element and REE geochemistry, the mineralogic characteristics, the Sr-Nd and Pb isotopic characteristics are put forward. The main points are: 1、A combined study of CL imaging and LA-ICP-MS U-Pb dating were carried out for zircon grains of the magmatic rocks in the Tazhong-Bachu region from the Tarim basin.The results of the systematic zircon LA-ICP-MS U-Pb dating reveal 272±6Ma to 291±10Ma for the magamatic rocks. It indicated that Early Permian is an important period of magmatic acvivity in the Tazhong-Bachu region. 2、There are a big hunch in the curves of primitive mantle-normalized trace element concentrations in the early Permian magmatic rocks from Kepintag, Mazhartag, Wajilitag region and the 14 wells. Light rare earth elements are comparatively rich and heavy rare earth elements are comparatively poor. The slope rates are same between light rare erath elements and heavy rare earth elements. It is not like the curves of the basalts in the convergent margin of plate , in which the slope rates of light rare erath elements is bigger than the alope rates of heavy rare erath elements, and the curves of heavy rare earth elements are comparatively flat. The magmatic rocks of Tazhong-Bachu region rarely have the characteristics of the basalts in the convergent margin of plate, which is that Tantalum, Niobium and Titanium are much poor, and Zirconium, Hafnium and Phosphorus are moderately poor. The magamatic rocks are mostly alkaline, which is indicated by the dots of the (Na2O+K2O)-SiO2 identification diagram. All of these indicate that the early Permian magmatic rocks were formed in an extension environment of intraplate. 3、The Thorium abundance is high and Tantalum abundance is low in most magmatic rocks from Tazhong-Bachu reguion, which is formed for crustal contamination.In the Th/Yb-Ta/Yb identification diagram，most dots are in the region, which means active continental margin, but a few dots are in the region, which means mantle source. It indicated the feeding of continental crust materials. 4、The magnesium content of the olvines from Wagilitag region is richest, and the olvines from Kepintag region is poorest in the tree region. 5、Through the the Sr-Nd and Pb isotopic study of the basalts and diabases from the F1 well core, Z1 well core, Z13 well core,TZ18 well core, and the basalts，gabbros, diabases(diabase-prophyrites) and pl-peridotites from Kepintag,Mazhartag, Wajilitag region , it indicated that all isotopic data is similar and close to enriched mantle.

天山南北山前盆地中-新生代沉积记录及其动力学分析

It has been long known that intense multiple Mesozoic-Cenozoic intracontinental deformations have controlled the grand scale basin-range structural evolution of the Tianshan and its adjacent basins. So it is important to study the sedimentary records of the piedmont basins along the two sides of the Tianshan synthetically for the continental geodynamic research.We carried out a magnetostratigraphy study on Cretaceous- Tertiary succession and U-Pb dating analysis of detrital zircons from the representative sandstone samples of the Mesozoic-Cenozoic deposits in Kuqa Subbasin, northern Tarim Basin, combining our previous results of multiple depositional records from different profiles including paleocurrent data, conglomerate clast, sandstone framswork grains, detrital heavy minerals and geochemistry analysis, so the multiple intracontinental tectonic processes of Tianshan and their depositional response in the Kuqa Subbasin can be revealed. The results show that the tectonic evolution of the Tianshan Orogen and the sedimentary processes of the Kuqa Subbasin can be divided into four periods: early Triassic(active period), from middle Triassic to late Jurassic(placid period), from early Cretaceous to Tertiary Paleocene(active period) and from Neogene to present (intensely active period). Simultaneously，the depositional records reveal the provenance types and tectonic attributes in different periods. As follows, the lower Triassic with a dominant age ranging from 250 to 290Ma of the Zircons, which were principally derived from alkali feldspar granites and alkaline intrusion obviously, relative to the magma activity in Permian. In middle Triassic-late Jurassic, the two samples collected from the Taliqike formation and the Qiakemake formation respectively show the age peak at 350～450Ma, which was relative to the subduction of the Tarim Block to Yili-Central Tianshan Plate. In this period the provenance of the Kuqa deposits was the Central Tianshan arc orogenic belts distantly with little height predominance.During early Cretaceous-Paleogene, two major zircons age spectra at 240~330Ma and 370~480Ma have been acquired, with some other not dominant age ranges, indicating complicated provenance types. In Neogene, the detrital zircons age dating ranges from 460 to 390 Ma primarily. What’s more, the newer chronology of the stratigraphy and the older source age, indicating that Tianshan was uplifted and exhumated further strongly. Further study on the heavy mineral and the detrital zircons age dating of the Mesozoic-Paleogene representative profiles in southern Junggar Basin, combined with the published results of the sandstone framework grains, we consider that it occurred obvious sedimentary and tectonic changes occurred in the inside of Jurassic, from late Jurassic to early Cretaceous and form early Cretaceous to late Cretaceous. On this faces, there are remarkable changes of the steady minerals and unstable minerals, the sandstone maturity and the age spectra of the detrital zircons. Compared the sedimentary records from the two sides of the Tianshan, We find that they are different obviously since Middle Jurassic. It can be concluded that Tianshan have uplifted highly enough to influence the paleo-climatic. According to the current strata division, the structural activity apparently showed a migration from north to south. That is to say, the South Tianshan uplift later than the north, especially from late Jurassic to early Cretaceous , but it was uplifted and exhumated more strongly. Furthermore, correlating the depositional records and tectonic styles in the Kuqa-South Tianshan basin-range conjugation site in the east with the west, the obvious differentiation between the west and the east from the Cretaceous especially in Tertiary along the Tianshan-Kuqa belt was revealed, probably showing earlier uplifting in the east while greater exhumation depth and sediment rates in the west. In addition, the contacting style of Kuqa subbasin to the Tianshan Orogenic belts and the basement structure are also inconsistent at different basin-range conjugation sites. It is probably controlled by a series of N-S strike adjusting belts within the Kuqa subbasin, or probably correlated with the material difference at the complicated basin-range boundary. The research on the Mesozoic-Cenozoic tectonic-depositional response in the piedmont basins along the two sides of the Tianshan shows that the basin-filling process was controlled by the intracontinental multicyclic basin-range interactions, especially affected by the intense tectonic differentiations of basin-range system, which can’t be illuminated using a single evolutionary model.

西秦岭新生代火山岩中的地幔捕虏体和捕虏晶研究

Western Qinling, a conjunction region of the North China Craton, the Yangtze Craton and the Tibetan Plateau, has very complicated history of geologic and tectonic evolution. Previous studies mainly focus on tectonics and petrology of volcanic rocks in the western Qinling. Therefore, little is known about the Cenozoic lithospheric mantle beneath the western Qinling. Mafic, ultramafic and/or alkaline volcanic rocks and their entrained mantle peridotitic xenoliths and xenocrysts are known as samples directly from the lithospheric mantle. Their petrological and geochemical characteristics can reflect the nature and deep processes of the lithospheric mantle. Cenozoic volcanic rocks in the western Qinling contain abundant mantle xenoliths and xenocrysts, which provide us an opportunity to probe the lithospheric mantle beneath this region and a new dimension to insight into geologic evolution. Cenozoic volcanic rocks (7-23 Ma) from the western Qinling are sparsely distributed in the Lixian-Dangchang-Xihe Counties, Gansu Province, China. Volcanic rocks contain plenty of mantle-derived xenoliths, including spinel lherzolites with subordinate wehrlite, dunite, olivine websterite, clinopyroxenite and garnet lherzolite, and few olivine, clinopyroxene and spinel xenocrysts. These peridotitic xenoliths show clear deformed textures and their major minerals show excellent orientation. Thus, these peridotites are typical deformed peridotites. Olivine xenocrysts have clearly-zoned textures. The peridotitic xenoliths can be divided into two groups based on their compositions, namely, the H-type and L-type. The H-type peridotites are characterized by high Fo (>90) in olivines in which fine-grained ones have higher Fo than the coarse grains, low CaO (<20 %) in clinopyroxenes, high Cr# (>40) in spinels and high equilibration temperatures. They may represent the refractory lithospheric mantle. In contrast, the L-type peridotites contain low Fo (<90) olivines (with lower Fo in fine-grained olivines), high CaO (>20 %) clinopyroxenes, low Cr# (<20) spinels and low equilibration temperatures. They experienced low degree of partial melting. The Cenozoic lithospheric mantle beneath the western Qinling was refractory in major element compositions based on the mineral compositions of xenoliths and xenocrysts and experienced complicated deep processes. The lithospheric mantle was modified by shear deformation due to the diapirism of asthenosphere and strong tectonic movements including the collision between North China Craton and Yangze Craton and the uplift of Tibetan Plateau, and then underwent metasomatism with a hydrous, Na, Ti and Cr enriched melt.

东南沿海火山碎屑岩40Ar/39Ar年代学研究

The Mesozoic pyroclastic rocks cover a vast coastal area in southeastern China, which is an important part of volcanic belt around Pacific Ocean. However, the previous dates for these rocks are confused and conflicted with each other, which have limited the further researches. It is difficult to date pyroclastic rocks, for almost all the dating methods, due to the multiple sources during their formation. Single crystal laser probe 40Ar/39Ar method is a powerful means to date pyroclastic rocks with complex sources. By distinguishing the xenocrysts and altered materials, Singe crystal total fusions of CO2 lasing on the sanidine separates could yield rational 40Ar/39Ar results and distinguish their sources. Timing on formations of the Moshishan Group, after avoiding the exotic and altered grains by lasing on the single sanidine separate, was reported in this study. 40Ar/39Ar incremental heating results of Cement part of the pyroclastic rocks show that the age spectrums are too complex to interpret for geological significance because of the alteration and 39Ar recoil. Incremental heating on K-feldspar separate from pyroclastic rocks give reliable data. Combining 40Ar/39Ar incremental heating ages and laser total fusion ages, we suggest the age was 125Ma-120Ma for Dashuang Fm, 120-119 Ma for Gaowu Fm, 119-114Ma for Xishantou Fm, 114-112Ma for Chawan Fm and 112-110Ma for Jiuliping Fm. The most intense period of volcanic activity in eastern Zhejiang Province was at about 120Ma. These new ages are much younger than the previous ones, suggesting that these thick volcanic formations had been formed in very short durations.

陕北地区石家湾-李家岔探区三叠系延长组石油成藏条件分析

Shijiawan –Lijiacha area, lying on the northeastern part of the Shanbei Slope of Ordos Basin, was selected as studying area. The previous explorations proved that the 2nd segment and 6th segment of the Yanchang Formation are the most important oil-bearing formations. It is indicated that the sedimentary facies and reservoir characteristics restricted the hydrocarbon accumulation regularity. Therefore, with petrology methodologies, such as outcrop observation, core description, geophysical logging interpretation, thin section determination, scanning electron microscope, as well as rock property analysis, the reservoirs was were systematically studied and characterized. The sedimentary micro-facies, seals, reservoir-seal combines, migration pathways and entrapping modes were taken into account. The author tempted to establish a base for further studies on reservoirs and on petroleum geology, and to provide some reliably geological evidences for later prospect activities. It was found that the sediments in the 2nd and 3rd segments of the Yanchang Formation in Shijiawan –Lijiacha area were deposited in braided rivers, and most sandy-bodies were identified as channel sandbars. The 4+5th and 6th segments were principally deposited in deltaic-plain environment, consisting of corresponding sub-facies such as distributary channels, natural levee, crevasse-splay and marsh. The skeleton sandy-bodies were identified as sandy sediments of distributary channels. The sand grains in reservoir in studied area possess generally low mineralogical maturity and moderate structural maturity, and the form of pores may be classified into intergranular types and dissolved types. Most reservoirs of Yanchang Formation in Shijiawan –Lijiacha area belong to extreme low-porosity low-permeability ones (type III), and the 2nd sediments belongs to low permeability one (type II) and the 6th segment belong to super low-permeability one(type Ⅳ). The reservoirs in the 2nd segment behave more heterogeneous than those in the 6th segment. The statistic analysis results show that, for 6th and 4+5th segments, the high quality reservoir-seal combines may be found everywhere in the studied area except in the northwest and the southwest parts; and for 1st and 2nd segments, in the northeast, central and southwest parts Petroleum migration happened in the duration of the Early Cretaceous period in both lateral and vertical directions. The migration paths were mainly constructed by permeable sandy-bodies. The superimposed channel sandy-bodies consist of the principal part of the system of carriers. the vertical fractures, that may travel through the seals between reservoirs, offered the vertical paths for migrating oil. It may be synthesized that oil coming from south kitchens migrated first laterally in carriers in the 6th segment. When arrived at the studied area, oil will migration laterally or/and vertical within both the sandy-bodies and fractures, in a climbing-stair way. The results demonstrate that the oil was entrapped in traps structure-lithology and/or lithology traps. In some cases, the hydrodynamic force may help to trap oil. Accumulation of oil in the area was mainly controlled by sedimentary facies, seals, structure, and heterogeneity of reservoir in the 2nd, 4+5th and 6th segments. Especially, the oil distributions in both the 2nd and 6th segments were obviously influenced by seals in the 4+5th segment. The existence of seals in 1st segment seems important for accumulation in the 2nd segment.

化德群和土门群沉积岩碎屑锆石研究：对华北克拉通基底及元古宙盆地演化的指示意义

The Huade Group, consisting of low-grade and un-metamorphosed sedimentary rocks with no volcanic interlayer, is located at the northern margin of the North China craton and adjoining the south part of the Central Asian Orogenic Belt. It is east to the Paleo- to Meso-Proterozoic Bayan Obo and Zhaertai-Langshan rifts and northwest to the Paleo- to Neo-proterozoic Yanshan aulacogen, in which the typical Changcheng, Jixian and Qingbaikou systems are developed. The Huade Group are mainly composed of pebbly sandstones, sandstones, greywackes，shales，calc-silicate rocks and limestones, partly undergoing low-grade metamorphism and being changed to meta-sandstones, schists, phyllites, slates and crystalline limestones or marbles. The stratigraphic sequences show several cycles of deposition. Each of them developed coarse clastic rocks – interbedded fine clastic rocks and pelites from bottom upward or from coarse clastic rocks to interbedded fine clastic rocks and pelites to carbonate rocks. The Tumen Group outcrop sporadically around or west to the Tanlu faults in western Shandong. They are mainly composed of pebbly sandstones, sandstones, shales and limestones. This thesis deals with the characteristics of petrology, geochemistry and sedimentary of the Huade Group and the Tumen Group, and discusses the LA-ICP-MS and SIMS U-Pb ages, Hf isotope and trace element composition of the detrital zircons from 5 meta-sandstone samples of the Huade Group and 3 sandstone samples of the Tumen Group. The age populations of the detrital zircons from the Huade Group are mainly ~2.5 Ga and ~1.85 Ga, and there are also minor peaks at ~2.0 Ga, ~1.92 Ga and ~1.73 Ga. Most of the detrital zircon grains of 2.47-2.57 Ga and a few of 1.63-2.03 Ga have Hf crust model ages of 2.7-3.0 Ga, and most of the detrital zircon grains of 1.63-2.03 Ga have Hf crust model ages of 2.35-2.7 Ga, with a peak at 2.54 Ga. The main age peaks of the detrital zircons from the Tumen Group are ~2.5 Ga、~1.85 Ga, 1.57 Ga, 1.5 Ga, 1.33 Ga and 1.2 Ga. Different samples from the Tumen Group have distinct Hf isotopic characteristics. Detrital zircon grains of ~2.52 Ga from one sandstone sample have 2.7-3.2 Ga Hf crust model ages, whereas zircon grains of 1.73-2.02 Ga and 2.31-2.68 Ga from another sample have Hf crust model ages of 2.95-3.55 Ga. Detrital zircon grains of Mesoproterozoic ages have Paleoproterozoic (1.7-2.25 Ga) crust model ages. Through detailed analyses of the detrital zircons from the Huade and Tumen Group and comparison with those from the sedimentary rocks of similar sedimentary ages, the thesis mainly reaches the following conclusions: 1. The youngest age peaks of the detrital zircons of 1.73 Ga constrains the sedimentary time of the Huade Group from late Paleoproterozoic to Mesoproterozoic. 2. The age peaks of detrital zircons of the Huade Group correspond to the significant Precambrian tectonic-thermal events of the North China craton. The basement of the North China craton is the main provenance of the Huade Group, of which the intermediate to high grade metamorphic sedimentary rocks are dominant and provide mainly 1.85-1.92 Ga sediments. 3. The Huade basin belongs to the North China craton and it is suggested that the northern boundary of the North China craton should be north to the Huade basin. 4. The stratigraphic characteristics indicate the Huade Group formed in a stable shallow-hypabyssal sedimentary basin. The rock association and sedimentary time of the Huade Group are similar to those of the Banyan Obo Group and the Zhaertai Group, and they commonly constitute late Paleoproterozoic to Mesoproterozoic continental margin basins along the northern margin of the North China craton. 5. The continental margin basins would have initiated coeval with the Yanshan and Xiong’er aulacogens. 6. The ages of the detrital zircons from the Tumen Group and the Penglai Group at Shandong peninsula and the Yushulazi Group at south Liaoning are similar, so their sedimentary time is suggested to be Neoproterozoic，coeval with the Qingbaikou system. The detrital zircon ages of 1.0-1.2 Ga from the Tumen Group, the Penglai Group and the Yushulazi Group indicate that there have being 1.0-1.2 Ga magmatic activities at the eastern margin of the North China craton. 7. The U-Pb age populations of the detrital zircons from the late Paleoproterozoic to Neoproterozoic sedimentary rocks suggest that the main Precambrian tectonic-thermal events of the North China craton happened at ~2.5 Ga and ~1.85 Ga. But the events at 2.7 Ga and 1.2 Ga are also of great significance. Hf isotope characteristics indicate that the significant crust growth periods of the North China craton are 2.7-3.0 Ga and ~2.5 Ga.

中国黄土高原洛川剖面 630 kyr 以来的孢粉记录

It is known that global climate changed from the early Tertiary “Green House” to the Quaternary “Ice House” of cyclic glacial-interglacial climatic changes. Since the middle Pleistocene, the climate cycles changed from 40 kyr to 100 kyr, and the amplitudes of climatic fluctuations increased significantly. Therefore, it is important to study the climate changes since the middle Pleistocene. The loess-paleosol sequence in China is considered as one of the most continuous continental records of the last 2.58 Ma. Paleoclimatic and environmental changes have been widely extracted through various climatic parameters. However, the history of paleovegetation on the Loess Plateau still remains unclear. Did an extensive broadleaf forest ever exist on the Loess Plateau? Pollen preserved in the loess and paleosol provides a direct record for vegetation and paleoenvironmental change on the Plateau. However, because it is difficult to extract sufficient pollen grains from loess, the pollen record since the middle Pleistocene especially in the central part of the Chinese Loess Plateau has not been well studied. So we preliminarily focus on the palynological records of the loess-paleosol sequence spanning the last 630 kyr at Luochuan and aim to understand the evolution of vegetation and climate change on the Chinese Loess Plateau. The main results and conclusions are as follows: 1. The palynological results show that the grassland has been a dominant vegetation in the Luochuan area since 630 kyr, even during the intervals of relatively warm and wet climatic conditions. 2. The pollen concentration of Luochuan section sharply decreases from the bottom of S1 to downward depth. This decrease can be attributed to depositional environment rather than climate change. In loess, not only oxidation, but also the PH of deposits and bacteria or fungi have been able to degrade sporopollenin. 3. The paleoclimatic condition during S4 stage, characterized with warmer condition during the early stage, was warmer and wetter than that during S5 in Luochuan area. Paleoclimate was warmer and wetter during the early stage of S5 and became colder and drier later. The special pedogenic features of S5-I can be attributed to a prolonged pedogenic duration rather than a warm-wet climate. 4. Evidence from pollen assemblage suggests that the Holocene vegetation has been affected by human impacts, especially after the Yangshao Culture. 5. The present steppe environment on the loess plateau is mainly due to natural conditions. Temperature, seasonal precipitation and soil structure are three important factors which control the vegetation type. 6. The vegetation on the loess plateau is characterized with zonal or azonal distribution. So local conditions should be taken into account when recover natural vegetation. Finally, the restoration and reconstruction of ecosystem on the loess plateau area should be focused on planting grassland rather than forests.

岩石磨蚀性和TBM滚刀磨损机理研究

Using the popular CERCHAR testing to measure the abrasiveness of rock which is CERCHAR abrasiveness index(CAI). The digital imagine processing program IPP is used to quantify the rock texture such as the grain size, the shape of grain and the index of grain homogeneity. And the rock mechanical testing machine are used to measure the strength, hardness and elastic modulus. Basic on these three experiments, this paper finds the relationship between the CAI and physical and mechanical properties of rock. They are both the mesostructure and macroscopical properties of rock. According to the theory of tribology and wear, this paper finds the disc cutter wear mechanism during the machine and rock interaction process. The detail research results are as follows: (1) The size and form of the mineral grains constituting the rocks affect the abrasiveness of the rock. The rock abrasiveness CAI is a function of the product of the texture coefficient(TC) multiplying equivalent quarts content(Q%). (2) There is no obvious relationship between the rock abrasiveness CAI and the single macroscopical property of rock such as hardness, unconfined compressive strength, tensile strength and elastic modulus. But when taking the texture coefficient(TC) and the mineral composition in consideration, it shows that the rock abrasiveness CAI is relative to the combination of the rock mechanical property, the texture coefficient(TC) and the mineral composition. That is to say various factors which are from the mesostructure feature to the macroscopical property of rock control the rock abrasiveness. (3) The disc cutter penetrating into rock is a machine/rock interaction process. During this interaction, the wear of disc cutter is mainly coming from the abrasive of abrasiveness matters. First, the surface of the cutter ring is hunched, and then the material of the cutter ring is being wiped off during the iterative interaction. Second, the hard mineral in the rock and the muck will microcosmic cutting the surface material of cutter ring. (4) The disc cutters consumption is determined by the machine parameters and the geology condition. The machine parameters include the thrust and the revolution rate of the cutterhead. The geology condition include two aspects: the macroscopical properties which are the strength and/or hardness of rock, the presence of discontinuities in rock mass, the hardness, sharp, edge and size of the muck and so on. And the mesostructure features which are the hard mineral composition, the sharp and size of the grain of the rock.