957 resultados para GROUP-3 METAL-COMPLEXES
Resumo:
The cell-mediated and humoral immune response of rabbits to antigens from larvae of Dermatobia hominis were analyzed by leucocyte migration inhibition factor assay (MIF), immunodiffusion (ID) and passive hemagglutination (PH) test in rabbits immunized with D. hominis extract, in rabbits immunized and infested with the parasite and rabbits infested with D. hominis. Twenty rabbits were divided into five groups: Group 1, rabbits immunized with a crude antigen extract, evaluated for 40 weeks at 4 week intervals; Group 2, rabbits immunized and infested with newly hatched larvae at 14 weeks post immunization (PI) and evaluated as Group 1; Group 3, rabbits immunized, evaluated for 28 weeks at 2 week intervals; Group 4, rabbits immunized and infested at 4 weeks PI and evaluated as Group 3; Group 5, rabbits infested and evaluated for 24 weeks at 2 week intervals. Different patterns of reactivity were observed in the infested and immunized animals: immunized rabbits developed antibodies and cellular immune responses earlier and at higher levels during immunization than the infested rabbits; the infestation at 14 weeks PI, when the cell-mediated and humoral immune response began to decrease, or at 4 weeks PI when these parameters were at higher levels, elicited an anamnestic response. After the spontaneous elimination of larvae by the host, from the 4th week PI onwards, high titers of antibodies and migration inhibition indices were maintained for a long period. These results suggest that the onset of cellular and humoral immune responses after immunization may be important as a biological control of myiasis and contribute to better understanding of the immune defense mechanism of the host against D. hominis.
Resumo:
Objective: the purpose of this study was to verify if the application of the Nd:YAG laser following pretreatment of dentin with adhesive systems that were not light cured in class V cavities and were prepared with Er:YAG laser would promote better sealing of the gingival margins when compared to cavities prepared the conventional way. Background Data: Previous studies had shown that the pretreatment of dentin with laser irradiation after the application of an adhesive system is efficient in achieving higher shear bond and tensile bond strength. Materials and Methods: Er:YAG laser (Kavo-Key, Germany) with 350 mJ, 4 Hz, and 116.7 J/cm(2) was used for cavity preparation. The conventional preparation was made with diamond bur mounted in high-speed turbine. Dentin treatment was accomplished using an Nd:YAG laser (Pulse Master 1000, ADT. USA) at 60 mJ, 10 Hz, and 74.65/cm(2) following application of the adhesive system. The cavities were stored with Single Bond/Z100 and Prime & Bond NT/TPH. Eighty bovine incisors were used, and class V preparations were done at buccal and lingual surfaces divided into eight groups: (1) Er:YAG preparation + Prime & Bond NT + TPH; (2) Er:YAG preparation + Single Bond + Z100; (3) Er:YAG preparation + Single Bond + Nd:YAG + Z100; (4) Er:YAG preparation + Prime & Bond NT + Nd:YAG + TPH; (5) conventional preparation + Prime & Bond NT + TPH; (6) conventional preparation + Single Bond + Z100; (7) conventional preparation + Single Bond + Nd:YAG + Z100; (8) conventional preparation + Prime & Bond NT + Nd:YAG + TPH. All specimens were thermocycled for 300 full cycles between 5 degreesC +/- 2 degreesC and 55 degreesC +/- 2 degreesC (dwell time of 30 sec), and stored in 50% silver nitrate solution for 24 h soaked in photodeveloping solution and exposed to fluorescent light for 6 h. After this procedure, the specimens were sectioned longitudinally in 3 portions and the extension of microleakage at the gingival wall was determined following a criteria ranging from 0 to 4 using scanning electron microscopy (SEM). The medium portion sectioned of each specimen was polished and prepared for nanoleakage avaliation by SEM. Results: Kruskall-Wallis and Miller statistical tests determined that group 3 presented less microleakage and nanoleakage. Conclusion: Application of the Nd:YAG laser following pretreatment of dentin with adhesive Single Bond non-photocured Single Bond adhesive in cavities prepared with Er:YAG promote better sealing of the gingival margins.
Resumo:
College students usually exhibit an irregular sleep-wake cycle characterized by great phase delays on weekends and short sleep length on weekdays. As the temporal organization of social activities is an important synchronizer of human biological rhythms, we investigated the role played by study's schedules and work on the sleep-wake cycle. Three groups of female college students were investigated: (1) no-job morning group, (2) no-job evening group, (3) job evening group. The volunteers answered a sleep questionnaire in the classroom. The effects of day of the week and group on the sleep schedules and sleep length were analyzed by a two way ANOVA for repeated measures. The three groups showed delays in the wake up time on weekends. No-job evening and morning groups also delayed bedtime, but the job evening group slept at the same time on weekdays as on weekends. Sleep length increased on weekends for morning group and job evening group, whereas the no-job evening group maintained the amount of sleep from weekdays to weekends. This survey showed that the tendency of phase delay on weekends was differently expressed according to study's schedules and work.
Resumo:
Background. There is a need to assess the effects of different antibiotic administration models on infectious complications among women from low-income populations who undergo cesarean delivery, and the cost benefit. Design. Randomized, blinded controlled clinical trial study of a single preoperative dose of cephalothin, versus a postcesarean scheme for infection prophylaxis, versus no antibiotics. Methods. The setting was a tertiary Brazilian center with 1,500 deliveries annually. Pregnant women (n = 600) with an indication for emergency or elective cesarean section were randomly allocated consecutively to one of three groups and treated as follows: Group 1 (n = 200), no antibiotics; Group 2 (n = 200), the standard antibiotics scheme followed at this center; Group 3 (n = 200), a single dose of intravenous cephalothin 2 g, intraoperatively. Main outcome measurements. Prevalences of wound infection, puerperal and postcesarean infections, and costs of antibiotics used. Results. Antibiotics reduced the incidence of puerperal infection, but did not change the percentages of wound and postcesarean infections and no use of antibiotics increased the puerperal infection risk sixfold. Cephalothin reduced the relative risk of puerperal infection by 89% (95% confidence interval: 7-87%). Penicillin reduced it by 78%, but this was not statistically significant. No deaths occurred. The costs of the two schemes were similar (almost US$1.00). Conclusions. Prophylactic cephalothin use was associated with decreased postcesarean puerperal infection and presented a cost benefit.
Resumo:
Purpose: To evaluate the effect of various bleaching agents on the cemento-enamel junction (CEJ) of human teeth by scanning electron microscopy (SEM) analysis. Methods: 30 intact teeth were selected and longitudinally sectioned, yielding 60 specimens. Thirty specimens served as controls; the other 30 were divided into six groups with five specimens each (n= 5) and bleached according to six protocols (Group 1: External bleaching with 10% carbamide peroxide; Group 2: External bleaching with 35% hydrogen peroxide; Group 3: External bleaching with 35% hydrogen peroxide; Group 4: Internal/external bleaching with 35% hydrogen peroxide; Group 5: Internal/external bleaching with 35% hydrogen peroxide; and Group 6: Intracoronal bleaching with a paste of sodium perborate mixed with 9% hydrogen peroxide). After treatment the specimens were prepared and examined in a scanning electron microscope. Results: the bleaching agents used in this study caused morphological changes in the CEJ and increased dentin exposure.
Resumo:
This in vitro study evaluated the cytotoxic effects of a restorative resin composite applied to an immortalized odontoblast-cell line (MDPC-23). Seventy-two round resin discs (2-mm thick and 4 mm in diameter) were light-cured for 20 or 40 seconds and rinsed, or not, with PBS and culture medium. The resin discs were divided into four experimental groups: Group 1: Z-100/20 seconds; Group 2: Z-100/20 seconds/rinsed; Group 3: Z100/40 seconds; Group 4: Z-100/40 seconds/rinsed. Circular filter paper was used as a control material (Group 5). The round resin discs and filter papers were placed in the bottom of wells of four 24-well dishes (18 wells for each experimental and control group). MDPC-23 cells (30,000 cells/cm(2)) were plated in the wells and allowed to incubate for 72 hours. The zone of inhibition around the resin discs was measured under inverted light microscopy; the MTT assay was carried out for mitochondrial respiration and cell morphology was measured under SEM. The scores obtained from inhibition zone and MTT assay were analyzed with the Kruskal-Wallis followed by Dunnett tests. In Groups 1, 2, 3 and 4, the thickness of the inhibition zone was 1,593 +/- 12.82 mum, 403 +/- 15.49 mum, 1,516 +/- 9.81 mum and 313 +/- 13.56 mum, respectively. There was statistically significant difference among the experimental and control groups at the 0.05 level of significance. The MTT assay demonstrated that the resin discs of the experimental groups 1, 2, 3 and 4 reduced the cell metabolism by 83%, 40.1%, 75.5% and 24.5%. Only between the Groups 2 and 4 was there no statistically significant difference for mitochondrial respiration. Close to the resin discs, the MDPC-23 cells exhibited rounded shapes, with only a few cellular processes keeping the cells attached to the substrate or, even disruption of plasma membrane. Adjacent to the inhibition zone, the cultured cells exhibited multiple fine cellular processes on the cytoplasmic membrane organized in epithelioid nodules, similar to the morphology observed to the control group. Based on the results, the authors may conclude that the Z-100 resin composite light cured for 20 seconds was more cytopathic to MDPC-23 cells than Z-100 light cured for 40 seconds. The cytotoxic effects of the resin discs decreased after rinsing them with PBS and culture medium. This was confirmed by MTT assay and upon evaluation of the inhibition zone, which was narrower following rinsing of the resin discs.
Resumo:
Endothelial cell function is essential to maintain corneal transparency, but unfortunately the regenerative capacity of the endothelium is limited. There are only a few reports describing the effect of age on morphologic appearance of corneal endothelial cells of dogs. Studies of normal corneal endothelial cells in humans and dogs have shown a decrease in endothelial cell density (ECD) and an increase in pleomorphism and polymegethism with advancing age. The purpose of this study was to investigate the effect of age on ECD and endothelial cell morphology in dogs. A total of 30 dogs were divided into three groups (10 dogs/group) based on age: group 1 (2-12 months old), group 2 (24-72 months old), and group 3 (84 months or older). Corneas were processed for light and scanning electron microscopy. Results showed only difference in cell density between group 1 and groups 2 and 3, showing an initial decrease in cell density as the animal matured. Whereas there was significantly greater variation in cell size within the dogs in group 3 than there was within the other two groups, suggesting that there was increased polymegethism and pleomorphism with advancing age.
Resumo:
The aim of this study was to evaluate the shear bond strength of brackets bonded with different restorative systems and compare it with that afforded by an established orthodontic bonding system. Seventy human bicuspids were used, divided into five different groups with 14 teeth each. Whereas a specific orthodontic bonding resin (Transbond (TM) XT) was used in the control group, the restorative systems Charisma, Tetric Ceram, TPH Spectrum and Z100 were used in the other four groups. Seven days after bonding the brackets to the samples, shear forces were applied under pressure in a universal testing machine. The data collected was evaluated using the ANOVA test and, when a difference was identified, the Tukey test was applied. A 5% level of significance was adopted. The mean results of the shear bond strength tests were as follows: Group 1 (Charisma), 14.98 MPa; Group 2 (Tetric Ceram), 15.16 MPa; Group 3 (TPH), 17.70 MPa; Group 4 (Z100), 13.91 MPa; and Group 5 or control group (Transbond (TM) XT), 17.15 MPa. No statistically significant difference was found among the groups. It was concluded that all tested resins have sufficient bond strength to be recommended for bonding orthodontic brackets.
Resumo:
Objective: the purpose of this study was to evaluate the effect of erbium:yttrium-aluminum-garnet laser instrumentation of root surfaces on the morphology of fibroblasts from continuous lineage. Method and materials: Dentinal slices with 4 mm(2) of surface area were obtained from teeth extracted for severe periodontal involvement. Specimens were assigned to one of three treatment groups: group 1, application of the laser with an energy level of 250 mJ at 103 pulses per second; group 2, application of the laser with an energy level of 80 mJ at 166 pulses per second; and group 3, similar to group 2, but with concomitant water irrigation of the device. The specimens were incubated in multiwell plates containing cell culture media. After 24 hours, the specimens were submitted to routine preparation for scanning electron microscopy. Three independent and blind examiners used photomicrographs to evaluate the morphology of the fibroblasts: 0 = without cells; 1 = flat cells; 2 = round cells; and 3 = combination of round and flat cells. Results: Statistical analysis indicated that there were significant differences among treatment groups and that group 3 was significantly different from groups 1 and 2. Conclusion: There was no difference between groups 1 and 2 in the morphology of fibroblasts. Laser instrumentation with concomitant irrigation impaired the adhesion of fibroblasts to dentinal surfaces.
Resumo:
Trypanosoma vivax outbreaks in beef cattle in the Pantanal region of Mato Grosso do Sul state, Brazil, causes relevant economical impact due to weight loss, abortion and mortality. Cattle moved from the Pantanal to adjacent areas of this ecosystem for breeding and fattening is a common feature. Therefore an epidemiological study on breeding cows in the transition area between Pantanal lowland and adjacent highlands of Mato Grosso do Sul was performed to determine the T. vivax infection dynamics and outbreak risk. Three experimental groups were formed: Group 1 consisted of cows parasitologically negative by the Woo test and in the enzyme-linked immunosorbent assay for T. vivax antibody detection (Tv-ELISA-Ab); Group 2 parasitologically negative and positive in the Tv-ELISA-Ab; and in Group 3 cows were parasitologically positive and with positive reactions in the Tv-ELISA-Ab. During 24 months, the cows' dislodgment between the above established groups was monitored by Woo test and Tv-ELISA-Ab exams. The tabanid population was also monitored and the highest number occurred during the rainy season. Although parasitemias were detected only in the first four samplings of the experimental period, the cows could be considered as trypanotolerant, because no clinical signs were observed. Despite the higher T. vivax incidence during the dry season, no disease symptoms were seen. Even though T. vivax epidemiological situation in the herd was characterized as endemic with seasonal variation, the probability of outbreaks was null within the conditions of the study.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Temporal IgG subclasses response in dogs following vaccination against Leishmania with Leishmune (R)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Objectives: This study evaluated the marginal gaps on several surfaces of onlays created with the Cerec 3D system using one intraoral and two extraoral optical impression methods. Methods: A human molar (#19) was mounted with its adjacent teeth on a typodont (Frasaco) and prepared for a MODL onlay. The typodont was assembled in the mannequin head in order to simulate clinical conditions. The same operator took 36 individual optical impressions using a CEREC 3D camera. For group 1 (IP), a thin layer of titanium dioxide powder (CEREC powder-VITA) was applied directly onto the surface of the preparation for imaging (n=12). For group 2 (EP), a sectional impression was taken with hydrocolloid Identic Syringable (Dux Dental), a die made with polyvinylsiloxane KwikkModel Scan (R-dental Dentalerzeugnisse GmbH) and powdered with titanium dioxide for imaging (n=12). For group 3 (ES), a sectional impression was taken with PVS and a sectional stock tray, a die fabricated in stone (Diamond die- HI-TEC Dental Products) and the die being imaged without powdering (n=12). One operator designed and machined the onlays in Vita Blocks Mark II for Cerec (VITA) using a CEREC 3D. The marginal gaps (pm) were measured with an optical microscope (50x) at 12 points, three on each surface of the MODL. The results were analyzed by two-way ANOVA/Tukey's (p=0.05). Results: The overall mean marginal gaps (mu m) for the three methods were: IP=111.6 (+/- 34.0); EP=161.4 (+/- 37.6) and ES=116.8 (+/- 42.3). IP and ES were equal, but both were significantly less than EP. The pooled mean marginal gaps (mu m) for the occlusal = 110.5 (+/- 39) and lingual = 111.5 (+/- 30.5) surfaces were equivalent and significantly less than the distal = 136.5 (+/- 42.5) and mesial = 161.1 (+/- 43.3). Conclusion: The marginal gap of CEREC 3D onlay restorations was not different when the optical impression was taken intraorally vs extraorally using a stone cast that does not require powdering. The lingual and occlusal surfaces showed the lowest gaps.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
In the present study, the ovaries of 15 healthy bitches divided into three groups according to age were analysed by histology and morphometry: group 1 (1-3 years), group 2 (> 3-5 years) and group 3 (> 5-7 years). After ovariosalpingohysterectomy, the ovaries were fixed, routinely processed for embedding in paraffin and stained with haematoxylin-eosin. The following morphometric parameters were analysed: maximum and minimum diameter (mu m), perimeter (mu m), area (mu m(2)) and roundness of the cytoplasm and nucleus of oocytes from different types of follicles. Significant differences in the cytoplasmic and nuclear parameters of follicular oocytes between the experimental groups were determined by ANOVA and the Tukey test (5%). For the biotechnology of reproduction, the present results showed that in vitro maturation yielded the best performance for oocytes from primordial follicles in group 3 females and for oocytes embedded in secondary and tertiary follicles in group 2 females. In addition, the present findings will help in the diagnosis and prognosis of diseases affecting bitches, and will especially contribute to a better understanding of these cells by researchers in the field of histology and canine reproduction.