Effect of compositional gradient on thermal behavior of synthetic graphite-phenolic nanocomposites

Synthetic graphite–phenolic nanocomposites were designed and synthesized with a compositional gradient which is shown to influence transient temperature fields during rapid temperature changes. Such nanocomposites were fabricated using a compression moulding technique, and thermal conductivity and heat capacity of nanocomposites were experimentally determined using a modified transient plane source technique over a wide temperature range from 253.15 to 373.15 K. The effects of four compositional gradient configurations on the transient temperature field across the thickness of a nanocomposite plate, at a high imposed temperature, was investigated. The transient time and temperature fields in nanocomposite structures were highly affected by the compositional gradient configurations.

Hope for resurrecting a functionally extinct parrot or squandered social capital? Landholder attitudes towards the Orange-bellied Parrot (Neophema chrysogaster) in Victoria, Australia

In early 2010, after 27 years of recovery effort, the orange-bellied parrot (OBP; Neophema chrysogaster) was expected to be extinct in the wild within a few years. Shortly before the imminent wild extinction became evident, we surveyed landholders (114 responses of 783 surveys delivered) in part of the main non-breeding area, according to three classes of modelled habitat suitability ('high', 'medium', and 'low'). Predictions of the habitat models appear to correlate with landholder perceptions of the presence of OBP habitat on private land, thus the models appear a tractable way to identify key stakeholders worthy of priority consultation in relation to habitat works. Landholders were sympathetic to wetlands and birds, including OBPs (89.4% were aware of OBPs). Most indicated that they would be upset if the OBP went extinct and agreed that critical habitat should be protected; 80.7% were prepared to consider changes to the way they managed their land to benefit the species, and sought more information on how they could do so (64.0%). This study suggests that the habitat model usefully identified key stakeholders and the OBP enjoyed high awareness, concern, and engagement among many stakeholders, shortly before the species was considered functionally extinct. The maintenance of landholder support is likely to be critical if future attempts are made to reintroduce the species to the wild.

Direct observation of the intergallery expansion of polystyrene–montmorillonite nanocomposites

The intergallery expansion development of a series of differently modified montmorillonite polystyrene nanocomposites was directly observed with time-resolved in situ small-angle X-ray scattering (SAXS) using synchrotron radiation. The results indicated that the interlayer expansion varied depending on the clay modification and the chemical compatibility of the clay modifiers with the styrene monomer. The influence of the differently modified clays on the free radical polymerization was also investigated, particularly the effect on the conversion of styrene and molecular weight evolution of the polymer. On the basis of the kinetic study of the polymerization of styrene in the presence of varied modified clay particles, the intergallery expansion mechanism was postulated and discussed for different composite morphologies. Such studies provide an important guideline for the design of clay modifiers and development of clay–polymer nanocomposites.

Polymeric materials with ordered nanostructures templated from hexagonal lyotropic liquid crystals

In this study, successful methods have been established to retain the ordered nanostructures in polymer materials templated from hexagonal lyotropic liquid crystals, which potentially renders broad applications as biomedical and membrane materials.

Composition-optimized synthetic graphite/polymer nanocomposites

In this study the optimization design, fabrication and characterization of synthetic graphite/phenolic nanocomposites are performed. The composition of synthetic graphite/phenolic nanocomposites was controlled across the thickness by stacking eight homogeneous layers containing 0, 5, 10, and 20wt% synthetic graphite in different sequences. Four compositional gradient patterns, as well as a homogenous nanocomposite, with the same geometry and synthetic graphite content, were fabricated to investigate the optimized design for thermomechanical properties. Results show that nanocomposites with a high concentration of synthetic graphite on the surfaces and neat resin at the center have the best thermomechanical and viscoelastic properties.

A controllable simple method for production of polymeric nanofiberous composite via single nozzle jet electrospinning

A special Micro-Nano fiberous composite structure composed of nano- and micro-scale fiber of Polycaprolactone (PCL) and Gelatin produced by using single nozzle electrospinning instrument. By controlling the solution (polymer concentration and polymer composition percent) and processing parameters of electrospinning (feed rate and electrostatic field), different portion of nano and micro fibers in the structure is achieved. This method can result a one-stage method of fabrication of Micro-Nano fiberous composite structure instead of previously used twostage process or using additional facility to produce structure near-similar to this composite structure. The resulting materials finely mingle nano- and micro fibers together, rather than simply juxtaposing them, as is commonly found in the literature. The results obtained from SEM, Flow Porosimetry, and DMA led the authors to confirm that the structure has very versatile and improved properties for many applications like cell culture scaffolds. These favourable mechanical and structural properties can provide easier opening of spaces for cell penetration to deeper levels of the scaffold and withstand to tensions during to clinical handling.

Mild and cost-effective synthesis of iron fluoride-graphene nanocomposites for high-rate Li-ion battery cathodes

Exploring high performance cathode materials is essential to realize the adoption of Li-ion batteries for application in electric vehicles and hybrid electric vehicles. FeF3, as a typical iron-based fluoride, has been attracting considerable interest due to both the high electromotive force value of 2.7 V and the high theoretical capacity of 237 mA h g_1 (1e_ transfer). In this study, we report a facile lowtemperature solution phase approach for synthesis of uniform iron fluoride nanocrystals on reduced graphene sheets stably suspended in ethanol solution. The resulting hybrid of iron fluoride nanocrystals and graphene sheets showed high specific capacity and high rate performance for iron fluoride type cathode materials. High stable specific capacity of about 210 mA h g_1 at a current density of 0.2 C was achieved, which is much higher than that of LiFePO4 cathode material. Notably, these iron fluoride/ nanocomposite cathode materials demonstrated superior rate capability, with discharge capacities of 176, 145 and 113 mA h g_1 at 1, 2 and 5 C, respectively.

Exercise-induced muscle glucose uptake in mice with graded, muscle-specific GLUT-4 deletion

To investigate the importance of the glucose transporter GLUT-4 for muscle glucose uptake during exercise, transgenic mice with skeletal muscle GLUT-4 expression approximately 30–60% of normal (CON) and approximately 5–10% of normal (KO) were generated using the Cre/Lox system and compared with wild-type (WT) mice during approximately 40 min of treadmill running (KO: 37.7 ± 1.3 min; WT: 40 min; CON: 40 min, P = 0.18). In WT and CON animals, exercise resulted in an overall increase in muscle glucose uptake. More specifically, glucose uptake was increased in red gastrocnemius of WT mice and in the soleus and red gastrocnemius of CON mice. In contrast, the exercise-induced increase in muscle glucose uptake in all muscles was completely abolished in KO mice. Muscle glucose uptake increased during exercise in both red and white quadriceps of WT mice, while the small increases in CON mice were not statistically significant. In KO mice, there was no change at all in quadriceps muscle glucose uptake. No differences in muscle glycogen use during exercise were observed between any of the groups. However, there was a significant increase in plasma glucose levels after exercise in KO mice. The results of this study demonstrated that a reduction in skeletal muscle GLUT-4 expression to approximately 10% of normal levels completely abolished the exercise-induced increase in muscle glucose uptake.

The effect of a rapid heating rate, mechanical vibration and surfactant chemistry on the structure-property relationships of epoxy/clay nanocomposites

The role of processing conditions and intercalant chemistry in montmorillonite clays on the dispersion, morphology and mechanical properties of two epoxy/clay nanocomposite systems was investigated in this paper. This work highlights the importance of employing complementary techniques (X-ray diffraction, small angle X-ray scattering, optical microscopy and transmission electron microscopy) to correlate nanomorphology to macroscale properties. Materials were prepared using an out of autoclave manufacturing process equipped to generate rapid heating rates and mechanical vibration. The results suggested that the quaternary ammonium surfactant on C30B clay reacted with the epoxy during cure, while the primary ammonium surfactant (I.30E) catalysed the polymerisation reaction. These effects led to important differences in nanocomposite clay morphologies. The use of mechanical vibration at 4 Hz prior to matrix gelation was found to facilitate clay dispersion and to reduce the area fraction of I.30E clay agglomerates in addition to increasing flexural strength by over 40%.

Preparation and characterization of natural rubber/silica nanocomposites using rule of similarity in latex

Rule of similarity and latex compounding techniques were combined for the first time to prepare natural rubber/nanosilica (NR/SiO2) nanocomposite with core-shell nanosilica-poly (methyl methacrylate) (SiO 2-PMMA) particles and PMMA-modified natural rubber matrix (NR-PMMA). The microstructure of SiO2 and nanocomposites with different SiO 2 contents was characterized by fourier transform infrared spectroscopy (FTIR); the morphology of nanocomposites was investigated with scanning electron microscopy (SEM); the tensile strength was characterized by tensile testing machine and the thermal stability of composites was studied by thermal gravimetric analysis. Results showed that PMMA chains have successfully grafted onto the surface of SiO2, and the core-shell SiO 2-PMMA nanoparticles and NR-PMMA latex have been perfectly incorporated. SiO2-PMMA nanoparticles are evenly distributed over the NR matrix with an average size in the range of 60-100 nm at the low content (SiO2? 3 wt%), while aggregations are apparently observed when 5 wt% SiO2 is loaded. In addition, NR/SiO2 composities possess a considerable improvement in ageing resistance compared with the pure NR. The tensile strength of composite increases from 6.99 to 12.72 MPa, reaching the highest value at a 0.5 wt% SiO2 loading, and then the figure decreases gradually because of the aggregation of SiO2 nanoparticles. It is anticipated that the reported process is to provide a simple and economic way for preparing NR composites.