What information-related activities do people with ESKD use?

Background Information practice is an emerging area of research that seeks to reveal how people learn to connect with the complex multimodal information landscapes that informs their ability to make decisions. Previous research has identified that people with end stage kidney disease (ESKD) tend to adopt a ‘received’ or ‘engaged’ view of information but little is known about the activities of information practice. Objectives This research project sought to identify the: i) information-related activities; and ii) how information is used. Methods Using a constructivist qualitative methodology, ten people with ESKD living in a large metropolitan city were purposively selected and interviewed. Data was subject to thematic analysis by researchers from nursing and information science. Saturation of themes was achieved. Results Participants were between 38 and 72 years, had been receiving kidney replacement therapy from 2 weeks to 31 years. Eight participants reported having access to the internet but none participated in chat rooms. The activities were conceptualized into themes as listening, seeking, searching, sharing and observing. These activities enabled people to create, reflect on and evaluate the information needed to inform their decision-making Conclusion/Application to Clinical Practice The information practice research approach will enable a better understanding of the underlying relationship between information, knowledge and experience to be better understood. For renal nurses who are involved in patient education being able to recognise the way people use information will assist in individualizing educational sessions and tailoring teaching strategies to make it more meaningful.

The Australian built environment : current challenges and innovative responses

The exploratory research presented in this discussion paper was undertaken as input to a major research grant application for the Australian Research Council. The research looks at the contribution of the Australian built environment to meet social and environmental needs. The paper examines the following research questions: What are the main challenges facing the Australian built environment? What types of building innovations might address those challenges? The research questions were addressed through desk-top research, involving an international review of (1) relevant academic literature in top-tier construction management and general management journals, and (2) high profile industry reports published internationally. Future research will involve assessing the diffusion of the identified building innovations and gauging their impact on social and environmental goals.

Measurement constructs to explore innovation diffusion in construction

Although the drivers of innovation have been studied extensively in construction, greater attention is required on how innovation diffusion can be effectively assessed within this complex and interdependent project-based industry. The authors draw on a highly cited innovation diffusion model by Rogers (2006) and develop a tailored conceptual framework to guide future empirical work aimed at assessing innovation diffusion in construction. The conceptual framework developed and discussed in this paper supports a five-stage process model of innovation diffusion namely: 1) knowledge and idea generation, 2) persuasion and evaluation; 3) decision to adopt, 4) integration and implementation, and 5) confirmation. As its theoretical contribution, this paper proposes three critical measurements constructs which can be used to assess the effectiveness of the diffusion process. These measurement constructs comprise: 1) nature and introduction of an innovative idea, 2) organizational capacity to acquire, assimilate, transform and exploit an innovation, and 3) rates of innovation facilitation and adoption. The constructs are interpreted in the project-based context of the construction industry, extending the contribution of general management theorists. Research planned by the authors will test the validity and reliability of the constructs developed in this paper.

Innovative Products Focus Group Report 2012. Brisbane: QUT

This report presents the results of Phase 3 of the Innovative Road Products Project: National Focus Groups. The groups developed solutions to address the most important obstacles constraining the adoption of innovative products in Australian road construction projects. The Innovative Products Survey, the major Project deliverable in 2011, and the largest innovation survey ever undertaken in the Australian road consutrction industry, results in the identification of key obstacles constraining the adoption of innovative products on road projects.

Innovative Products Survey Report

This report presents the results of the 2011 Australian road and bridge product innovation survey, the largest survey of its kind ever undertaken. The survey sample was defined as key organisations involved in the Australian road and bridge construction industry. The survey focused on four sectors across the road and bridge product supply chain: suppliers (comprising manufacturers and distributors), consultants (primarily engineering consultant firms), contractors (comprising head and trade contractors and subcontractors) and clients (state government road agencies). The sample comprised the four sectors in Queensland, New South Wales and Victoria.

Innovative Products Project: Background Study

The Australian Research Council (ARC) Innovative Products Project aims to facilitate project innovation by exploring means to improve the diffusion of innovative products to road and bridge projects. It adopts a highly novel approach to achieve this end, developing three different ways of viewing the problem: (1) as a relational governance issue, (2) as an absorptive capacity issue and (3) as a knowlege intermediation issue. This report presents teh results of teh first phase of a three phase fieldwork program.

The naming of waterfalls

As features of the landscape, waterfalls have been studied extensively by geographers, but the names given to these landforms have received relatively little scholarly attention. This paper examines the naming of waterfalls and addresses the question of classifying these hydronyms. The subject is considered in a global historical context, focusing on place names in the anglophone world. Until the 18th and 19th centuries, relatively few waterfalls were named.With the beginning of the Industrial Revolution, water power rose in economic importance, and at the same time, there was a growing scientific and aesthetic engagement with the landscape. These developments are suggested as reasons for the increased interest in waterfalls which were then being recorded in topographical literature and on maps, individual names being given to increasing numbers of falls. European exploration added to the knowledge of the world’s waterfalls, many of which were given names by their ‘discoverers’. This naming process accelerated with the growth of domestic and overseas tourism which exploited scenic resources such as waterfalls. Until now, research on the names of waterfalls has been fragmentary, and the classification of these hydronyms has been neglected. This paper demonstrates that waterfall names can be classified in accordance with a recognised toponymic typology. Using examples drawn from waterfall guidebooks, databases, maps, and other sources, the following discussion supports George Stewart’s claim that his toponymic classification is valid for place names of all kinds.

Identification of copper species present in Cu-ZSM-5 catalysts for NOx reduction

The structure of Cu-ZSM-5 catalysts that show activity for direct NO decomposition and selective catalytic reduction of NOx by hydrocarbons has been investigated by a multitude of modern surface analysis and spectroscopy techniques including X-ray photoelectron spectroscopy, thermogravimetric analysis, and in situ Fourier transform infrared spectroscopy. A series of four catalysts were prepared by exchange of Na-ZSM-5 with dilute copper acetate, and the copper loading was controlled by variation of the solution pH. Underexchanged catalysts contained isolated Cu2+OH-(H2O) species and as the copper loading was increased Cu2+ ions incorporated into the zeolite lattice appeared. The sites at which the latter two copper species were located were fundamentally different. The Cu2+OH-(H2O) moieties were bound to two lattice oxygen ions and associated with one aluminum framework species. In contrast, the Cu2+ ions were probably bound to four lattice oxygen ions and associated with two framework aluminum ions. Once the Cu-ZSM-5 samples attained high levels of exchange, the development of [Cu(μ-OH)2Cu]n2+OH-(H2O) species along with a small concentration of Cu(OH)2 was observed. On activation in helium to 500°C the Cu2+OH-(H2O) species transformed into Cu2+O- and Cu+ moieties, whereas the Cu2+ ions were apparently unaffected by this treatment (apart from the loss of ligated water molecules). Calcination of the precursors resulted in the formation of Cu2+O2- and a one-dimensional CuO species. Temperature-programmed desorption studies revealed that oxygen was removed from the latter two species at 407 and 575°C, respectively. © 1999 Academic Press.

An illusory interiority : interrogating the discourse/s of inclusion

It is generally accepted that the notion of inclusion derived or evolved from the practices of mainstreaming or integrating students with disabilities into regular schools. Halting the practice of segregating children with disabilities was a progressive social movement. The value of this achievement is not in dispute. However, our charter as scholars and cultural vigilantes (Slee & Allan, 2001) is to always look for how we can improve things; to avoid stasis and complacency we must continue to ask, how can we do it better? Thus, we must ask ourselves uncomfortable questions and develop a critical perspective that Foucault characterised as an ‘ethic of discomfort’ (Rabinow & Rose, 2003, p. xxvi) by following the Nietzscheian principle where one acts “counter to our time and thereby on our time… for the benefit of a time to come” (Nietzsche, 1874, p. 60 in Rabinow & Rose, 2003, p. xxvi). This paper begins with a fundamental question for those participating in inclusive education research and scholarship – when we talk of including, into what do we seek to include?

Evidence supporting exercise interventions for persons in early-stage Alzheimer’s disease

The purpose of this article is to grade research evidence supporting exercise-based interventions for persons with early-stage dementias and to report the recommendations of a consensus panel. The search produced 11 data based articles testing the effects of exercise interventions on a variety of outcomes. The body of evidence to support exercise interventions in the prevention and treatment of Alzheimer’s disease is growing and has potential as a treatment modality following translational studies in recreation therapy and other fields.

Hybrid graphene and graphitic carbon nitride nanocomposite : gap opening, electron–hole puddle, interfacial charge transfer, and enhanced visible light response

Opening up a band gap and finding a suitable substrate material are two big challenges for building graphene-based nanodevices. Using state-of-the-art hybrid density functional theory incorporating long range dispersion corrections, we investigate the interface between optically active graphitic carbon nitride (g-C3N4) and electronically active graphene. We find an inhomogeneous planar substrate (g-C3N4) promotes electronrich and hole-rich regions, i.e., forming a well-defined electron−hole puddle, on the supported graphene layer. The composite displays significant charge transfer from graphene to the g-C3N4 substrate, which alters the electronic properties of both components. In particular, the strong electronic coupling at the graphene/g-C3N4 interface opens a 70 meV gap in g-C3N4-supported graphene, a feature that can potentially allow overcoming the graphene’s band gap hurdle in constructing field effect transistors. Additionally, the 2-D planar structure of g-C3N4 is free of dangling bonds, providing an ideal substrate for graphene to sit on. Furthermore, when compared to a pure g-C3N4 monolayer, the hybrid graphene/g-C3N4 complex displays an enhanced optical absorption in the visible region, a promising feature for novel photovoltaic and photocatalytic applications.

Dots versus antidots : computational exploration of structure, magnetism, and half-metallicity in boron−nitride nanostructures

Triangle-shaped nanohole, nanodot, and lattice antidot structures in hexagonal boron-nitride (h-BN) monolayer sheets are characterized with density functional theory calculations utilizing the local spin density approximation. We find that such structures may exhibit very large magnetic moments and associated spin splitting. N-terminated nanodots and antidots show strong spin anisotropy around the Fermi level, that is, half-metallicity. While B-terminated nanodots are shown to lack magnetism due to edge reconstruction, B-terminated nanoholes can retain magnetic character due to the enhanced structural stability of the surrounding two-dimensional matrix. In spite of significant lattice contraction due to the presence of multiple holes, antidot super lattices are predicted to be stable, exhibiting amplified magnetism as well as greatly enhanced half-metallicity. Collectively, the results indicate new opportunities for designing h-BNbased nanoscale devices with potential applications in the areas of spintronics, light emission, and photocatalysis.

Hybrid graphene/titania nanocomposite : interface charge transfer, hole doping, and sensitization for visible light response

We demonstrated for the first time by large-scale ab initio calculations that a graphene/titania interface in the ground electronic state forms a charge-transfer complex due to the large difference of work functions between graphene and titania, leading to substantial hole doping in graphene. Interestingly, electrons in the upper valence band can be directly excited from graphene to the conduction band, that is, the 3d orbitals of titania, under visible light irradiation. This should yield well-separated electron−hole pairs, with potentially high photocatalytic or photovoltaic performance in hybrid graphene and titania nanocomposites. Experimental wavelength-dependent photocurrent generation of the graphene/titania photoanode demonstrated noticeable visible light response and evidently verified our ab initio prediction.

Combined electrophoretic deposition–anodization method to fabricate reduced graphene oxide–TiO2 nanotube films

We directly constructed reduced graphene oxide–titanium oxide nanotube (RGO–TNT) film using a single-step, combined electrophoretic deposition–anodization (CEPDA) method. This method, based on the simultaneous anodic growth of tubular TiO2 and the electrophoretic-driven motion of RGO, allowed the formation of an effective interface between the two components, thus improving the electron transfer kinetics. Composites of these graphitic carbons with different levels of oxygen-containing groups, electron conductivity and interface reaction time were investigated; a fine balance of these parameters was achieved.