TECHNIQUES FOR PRODUCING DEFECT-FREE SOI BY DUAL ELECTRON BEAM HEATING OF DEPOSITED POLYSILICON.

Advances in the dual electron-beam recrystallization technique arising from the fast scanning of a line beam parallel to the edges of narrow seeding windows are described. The resultant recrystallized layers are essentially defect-free, have good surface flatness, and cover large areas.

EXPERIMENTAL TECHNIQUES IN COMBUSTION USE OF IN-CYLINDER IONISATION FOR THE INVESTIGATION AND CONTROL OF SPARK IGNITION ENGINES.

Ions generated during combustion have been used in three ways to give qualitative combustion information. Langmuir type probes have been inserted into the combustion chamber opposite the spark plug location. The centre electrode of the sparking plug itself has been used to produce an ionisation signal from the slightly ionised gases remaining after the flame front has departed. The spark discharge at ignition time has been used as an anemometer.

SUB-BAND CODING TECHNIQUES FOR ROBUST 4. 8 TO 8 kb/s SPEECH CODERS.

This paper describes a speech coding technique that has been developed in order to provide a method of digitising speech at bit rates in the range 4. 8 to 8 kb/s, that is insensitive to the effects of acoustic background noise and bit errors on the digital link. The main aim has been to develop a coding scheme which provides speech quality and robustness against noise and errors that is similar to a 16000 b/s continuously variable slope delta (CVSD) coder, but which operates at half its data rate or less. A desirable aim was to keep the complexity of the coding scheme within the scope of what could reasonably be handled by current signal processing chips or by a single custom integrated circuit. Applications areas include mobile radio and small Satcomms terminals.

The effect of feeding rate on the growth, food conversion and protein efficiency of silver dollar, Metynnis schreitmulleri (AHL), fry

A 30-day experiment was conducted to determine the effects of varying feeding rates on the growth of fry of silver dollar, Metynnis schreitmulleri (Ahl). Silver dollar fry with an average initial body weight of 1.100 ± 0.029 g were collected from a local fish breeder and fed a diet (35% protein and 6% fat) at the rate of 3, 6 and 9% of body weight per day in two equal meals. Per cent weight gain increased from 54.54 to 118.18 with increased feeding rates, which were significantly different (p<0.05) from each other. The highest specific growth rate was obtained in the fry fed at 9% body weight per day. In another study for 30 days, the effects of feeding frequency on growth, feed conversion and protein efficiency of silver dollar fry were evaluated. Groups of silver dollar fry with an initial individual weight of 0.700 ± 0.019 g were offered feed continuously for 24 hours during the day or night at different time intervals with varying meal sizes. The night time feeding with two meals gave the lowest weight and length gains (0.985 g and 0.30 cm). The growth rates of fish fed during day with three equal-sized meals are significantly (p<0.05) higher (4.66%) than the other treatments.

Comparison of different scheduling techniques for H-infinity controllers

Several approaches to designing schedule H-infinity control systems are compared. These include a controller switching approach and also parameter scheduling of an observer representation of the controller. They are illustrated by application to a Generic VSTOI. Aircraft Model (GVAM) supplied by The Royal Aerospace Establishment (RAE) at Bedford. The switched design has been tested on the simulator at RAE Bedford. The linear H-infinity designs make use of a loop-shaping followed by robust stabilisation to additive perturbations of a normalised coprime factorisation of the shaped plans. The different scheduling approaches are compared with respect to achieved robust stability levels. performance and complexity of implementation.

Techniques for the transport and maintenance of scleractinian coral

Several small scleractinian coral colonies were collected from a remote reef and transferred [to] the Louisiana Universities Marine Center (LUMCON) for in vitro reproductive and larval studies. The species used here were Porites astreoides and Diploria strigosa. Colony size was ~20 cm in diameter. Colonies were brought to the surface by liftbag and stored in modified ice coolers. They were transported from Freeport, TX to Cocodrie, LA by truck for nearly 15 hours where field conditions were simulated in waiting aquaria. This document describes the techniques and equipment that were used, how to outfit such aquaria, proper handling techniques for coral colonies, and several eventualities that the mariculturist should be prepared for in undertaking this endeavor. It will hopefully prevent many mistakes from being made.

Application of domain decomposition and transmission line modelling techniques to 2D, time-domain, finite element problems

In this paper a recently published finite element method, which combines domain decomposition with a novel technique for solving nonlinear magnetostatic finite element problems is described. It is then shown how the method can be extended to, and optimised for, the solution of time-domain problems. © 1999 IEEE.

The use of C-V techniques to investigate instability mechanisms in M-I-S structures

In the field of flat panel displays, the current leading technology is the Active Matrix liquid Crystal Display; this uses a-Si:H based thin film transistors (TFTs) as the switching element in each pixel. However, under gate bias a-Si:H TFTs suffer from instability, as is evidenced by a shift in the gate threshold voltage. The shift in the gate threshold voltage is generally measured from the gate transfer characteristics, after subjecting the TFT to prolonged gate bias. However, a major drawback of this measurement method is that it cannot distinguish whether the shift is caused by the change in the midgap states in the a-Si:H channel or by charge trapping in the gate insulator. In view of this, we have developed a capacitance-voltage (C-V) method to measure the shift in threshold voltage. We employ Metal-Insulator-Semiconductor (MIS) structures to investigate the threshold voltage shift as they are simpler to fabricate than TFTs. We have investigated a large of number Metal/a-Si:H/Si3N4/Si+n structures using our C-V technique. From, the C-V data for the MIS structures, we have found that the relationship between the thermal energy and threshold voltage shift is similar to that reported by Wehrspohn et. al in a-Si:H TFTs (J Appl. Phys, 144, 87, 2000). The a-Si:H and Si3N4 layers were grown using the radio-frequency plasma-enhanced chemical vapour deposition technique.

Analytical techniques for indentation of viscoelastic materials

Indentation of linearly viscoelastic materials is explored using elastic-viscoelastic correspondence analysis for both conical-pyramidal and spherical indentation. Boltzmann hereditary integrals are used to generate displacement-time solutions for loading at constant rate and creep following ramp loading. Experimental data for triangle- and trapezoidal-loading are examined for commercially-available polymers and compared with analytical solutions. Emphasis is given to the use of multiple experiments to test the fidelity and predictive capability of the obtained material creep function. Plastic deformation occurs in sharp indentation of glassy polymers and is found to complicate the viscoelastic analysis. A new method is proposed for estimating a material time-constant from peak displacement or hardness data obtained in pyramidal indentation tests performed at different loading rates.

Feeding stimulatory effects of Cyperus rotundus tuber on Cirrhinus mrigala

Traditionally tubers of cyperus (Cyperus rotundus) and its extracts have been used for alluring fish during harvesting in India. An experiment was conducted to evaluate its feeding stimulatory activity and effect on the growth of a commercially important freshwater fish, Cirrhinus mrigala. Three isonitrogenous and isocaloric formulated diets viz. plant ingredient based control and control supplemented with cyperus tuber (CS) at 1% and 5% levels were fed to the fingerlings of mrigal, C. mrigala (2.68+0.20 g) for a period of 45 days. The growth performance and the activity of metabolic enzymes, aspartate aminotransferase (AST) and alanine aminotransferase (ALT), in liver, gill and muscle tissues of mrigal were studied during every 15 days interval. Highest relative growth (72.28%) was obtained in the mrigal fed with the diet containing 5% cyperus (5% CS), while the relative growths were 66.18% and 43.40% for the fish fed with the 1% CS diet and control respectively. The activities of AST and ALT were significantly higher (p<0.01) in both 1% and 5% CS diets as compared to the control in all the tissues studied. Higher aminotransferase activities were observed in the tissues of 5% CS group than in those of 1% CS group throughout the experimental period. The observed higher enzymatic activity was concomitant with the higher growth rate in fish. The results suggested that cyperus tuber supplementation increased feed palatability and growth.

Effect of feeding three different formulated feeds having different protein levels on the growth of angel fish (Pterophyllum scalare) juveniles

Experiment was conducted to study the effect of dietary protein level on growth and nutrient utilization by angel fish (Pterophyllum scalare) juveniles. Fifty-four juveniles (average wt. 2-2.5 g) were equally divided in three treatments with each of three replicates. Three formulated diets with graded protein levels, T1 (35% CP), T2 (40% CP) and T3 (45% CP) were fed to juveniles for 45 days. A trend of higher weight gain %, SGR, FER and PER was found with the increased CP level in the feed. Feed intake was similar in all the groups. T3 group fed with 45% CP registered highest weight gain % (43.26 ± 2.07), SGR (0.78 ± 0.04), FER (0.29 ± 0.01), which were significantly higher (P<0.05) than the T1 and T2 groups. Protein digestibility of T2 and T3 groups was significantly higher than the T1 group. Survival was similar in all the experimental groups. Diet with 45% CP with protein energy ratio of 112.62 mg protein/K cal. is ideal for juvenile angel fish for indoor rearing.

Production of triploid African catfish, Clarias gariepinus (Burchell), using chromosome manipulation techniques

An experiment was conducted to induce triploidy in African catfish, Clarias gariepinus, using heat shock and cold shock techniques. Cold shock at a temperature of 0± 1°C and 5±1°C for a duration of 15, 30, 45 and 60 min and heat shock at a temperature of 40±0.5°C and 41 ±OS C for a duration of 1, 2 and 3 min was given to induce triploidy 5 min after fertilization. Maximum percentage of triploids (91.4%) were obtained in the heat shock at a temperature of 40±0SC for a duration of 1 min whereas cold shock at 0± 1 C for a duration of 60 min yielded 90% of triploids. Chromosome analysis revealed that diploids have 54 chromosomes and triploids have 81 chromosomes. The erythrocyte measurements of the minor axis and major axis were 1.17 times larger in treated fish than in controls. The growth studies showed that the growth rate was not significantly affected in triploids.

Development of artificial breeding techniques for long-whiskered catfish, Sperata aor and giant river catfish, Sperata seenghala of Bangladesh

Sperata aor and S. seenghala are the two important native catfishes of Bangladesh but commercial farming of these species is not possible due to lack of naturally collected or artificially produced seeds for stocking. Attempts were made to develop techniques for seed production by artificial breeding and nursery-rearing of fries of these catfishes. A total of 60 S. seenghala (750-1,500 g) and 10 S. aor (600-1,000 g) broods were collected from the Brahmaputra river-basin and floodplains in Mymensingh region four months prior to their breeding season. The collected brood fishes were reared in separate earthen ponds with supplementary feeds comprising of rice bran (40%), mustard oil cake (29%), fish meal (30%) and vitamin-premix (1 %). Three experiments were conducted to optimize the hormone dose. A total of nine S. seenghala females weighing from 750 to 1,500 g were given an initial and resolving dose of 12-20 and 16-24 mg PG/kg body weight, respectively. The males weighing from 650-950 g were administered a single dose of 18-26 mg PG/kg body weight at the time of the time of administering the resolving dose to the females. The females ovulated partially and the eggs were examined under a compound microscope, but most of them were found to be less ripe or damaged. Collection of milt by stripping the males was not successful. The testes were taken out and sperm were observed to be non-motile and less developed. In view of stimulating natural propagation of S. seenghala, artificial holes (nests) were constructed in the pond bottom. Each hole was 0.7 m in diameter and 0.3 m in depth. A total of 10 holes were made and then 10 pairs of S. seenghala breeders (800-1,200 g) were stocked in the pond. In mid February, 3,000 fry of S. seenghala with a mean length of 4.60 cm and weight of 0.36 g were collected by repeated netting followed by drying of the pond. The fry were then stocked in a nursery pond and fed with commercial feed (SABINCO starter-1). The average length and weight of the fingerlings were 9.01 cm and 3.95 g, respectively and the estimated survival was 60% after two months of rearing. S. aor did not respond to natural spawning. Further study is essential to develop techniques for their successful artificial and natural breeding.

Size related feeding patterns and electivity indices of silver barb (Barbodes gonionotus Bleeker) from a pond, Bangladesh

The feeding patterns with respect to quality and quantity of food of silver barb, Barbodes gonionotus varied with their size and development. The results indicated that the fish in the size group I (7-25 mm TL) were fairly omnivore with particular liking for rotifera, green and blue-green algae while the size group II (25.1-44 mm TL) and III (44.1-55 mm TL) were omnivore with higher tendency of feeding on debris, aquatic plants, green algae, blue-green algae and rotifera. However, the fish of the size group IV (55.1-80 mm TL) were found to be herbivore with feeding preference for aquatic plants, green and blue-green algae. In all the size groups, debris was the most dominant food item. Feeding preference of the fish showed clear ontogenetic shift. The electivity indices revealed that the fish were selective feeder.

Diel feeding patterns, rate of gastric evacuation and foods of Indian sandwhiting, Sillago sihama in Mulki estuary, west coast of India

Diel feeding chronology of sandwhiting, Sillago sihama was examined from stomach collections taken during the months of April, July and December'99 in Mulki estuary along Dakshina Kannada coast, India. Significant differences in mean stomach content weight were found between several consecutive 3 hour periods with peak fullness occurring in early morning and evening hours. The rate of gastric evacuation of natural food (crustacea, polychaetes and fish) was measured in the field was best described by an exponential model, with an estimated evacuation time of 8.0 h at a temperature of 28.5 ± 1.2°C. Stomach content analysis indicated that this species is a carnivore on a wide range of benthic, epibenthic and planktonic prey. The principal food items of S. sihama were crustaceans, polychaetes and fish. Fishes less than 100 mm TL preferred mainly crustaceans while larger ones depends on polychaetes, crustaceans and fish. The feeding activity of S. sihama was influenced by tidal cycle.