The Geography of Brazilian External Trade: Right Option for a BRIC?

Words can make a difference sometimes.Brazil is – together with the other ´BRIC´- a large economy, with an increasingly high profile in the international scenario. Large domestic market makes it more likely to obtain ‘growth-led exports’ rather than ‘export-led growth’, which implies a pro-active role in international relations. The option for intensifying regional trade links is a reasonable one and perhaps even inevitable, taking into account the experience elsewhere, but the actual regional conditions raise a number of questions that have to do both with further empirical assessment and to more specific identification of expectations with regard to probable achievements. This article has shown that the road to reach significant progress in this direction is not flat and requires more clear signalling to economic agents, strong political will and a good deal of specific measures. But it has also suggested that it might provide positive results.

Macroeconomic trade-offs and external vulnerabilities of human development in Nicaragua

Nicaragua is making progress towards the Millennium Development Goals, but is set to miss a number of targets in 2015. This paper’s general equilibrium analysis shows that it is unfeasible for the government to step up spending in order to meet these targets by the 2015 deadline. Any boost to public spending and financing would have to be front-loaded, which would entail pernicious macroeconomic trade-offs. A more realistic scenario would be to postpone meeting the goals until 2020. In that case, the allocation of public spending would spur economic growth without causing macroeconomic hardships, although the country would nevertheless remain highly vulnerable to external shocks.

Molecular Evaluation of Developmental Competence of Oocytes Collected In Vivo from Buffalo and Bovine Heifers during Winter and Summer

Buffaloes and bovines are polyestrous and seasonal or annual livestock, respectively, that show reduced fertility during heat stress. To investigate whether reduced fertility is related to oocyte competence in both species, immature oocytes from buffalo and bovine heifers were collected during winter and summer and subjected to molecular analyses. In each season, heifers of both species had their follicular wave emergence synchronized with a standard protocol (Ferreira et al., 2011). Before being subjected to ovum pick up (OPU), cutaneous (CT; degrees C) and rectal (RT; degrees C) temperatures and respiratory rate (RR; breaths/min) were measured. Oocytes' RNA was extracted to evaluate the expression of target genes related to mtDNA replication/transcription (PPARGC1A, TFAM and MT-CO1), apoptosis (BAX and BCL2) and HS (HSP90AA1 and HSPA1AB). ACTB, HIST1H2AG and GAPDH were initially chosen as housekeeping genes. In buffaloes, CT (35.0 +/- 0.4 vs 23.8 +/- 0.5), RT (38.7 +/- 0.1 vs 38.0 +/- 0) and RR (21.3 +/- 1.2 vs 15.4 +/- 1.1) were higher during summer than winter. However, in bovine heifers, RT (38.7 +/- 0.1 vs 38.6 +/- 0.1) and RR (44.8 +/- 1.5 vs 40.6 +/- 1.5) were similar in both seasons, while CT (31.6 +/- 0.3 vs 30.2 +/- 0.3) was increased during summer. Reduced expression of ACTB, HIST1H2AG and GAPDH was evidenced during summer, disqualifying them as housekeeping genes. Similarly, the expression of all target genes was reduced during summer in oocytes of both species. In summary, physiological responses to heat stress seem to be more intense in buffalo than bovine heifers. However, in both species, negative effects of heat stress upon oocyte quality occur at the molecular level and affects genes related to several biological functions.

Influence of Tapered and External Hexagon Connections on Bone Stresses Around Tilted Dental Implants: Three-Dimensional Finite Element Method With Statistical Analysis

Background: The purpose of this study is to analyze the tension distribution on bone tissue around implants with different angulations (0 degrees, 17 degrees, and 30 degrees) and connections (external hexagon and tapered) through the use of three-dimensional finite element and statistical analyses.Methods: Twelve different configurations of three-dimensional finite element models, including three inclinations of the implants (0 degrees, 17 degrees, and 30 degrees), two connections (an external hexagon and a tapered), and two load applications (axial and oblique), were simulated. The maximum principal stress values for cortical bone were measured at the mesial, distal, buccal, and lingual regions around the implant for each analyzed situation, totaling 48 groups. Loads of 200 and 100 N were applied at the occlusal surface in the axial and oblique directions, respectively. Maximum principal stress values were measured at the bone crest and statistically analyzed using analysis of variance. Stress patterns in the bone tissue around the implant were analyzed qualitatively.Results: The results demonstrated that under the oblique loading process, the external hexagon connection showed significantly higher stress concentrations in the bone tissue (P < 0.05) compared with the tapered connection. Moreover, the buccal and mesial regions of the cortical bone concentrated significantly higher stress (P < 0.005) to the external hexagon implant type. Under the oblique loading direction, the increased external hexagon implant angulation induced a significantly higher stress concentration (P = 0.045).Conclusions: The study results show that: 1) the oblique load was more damaging to bone tissue, mainly when associated with external hexagon implants; and 2) there was a higher stress concentration on the buccal region in comparison to all other regions under oblique load.

Investigation of the Effect of Sealer Use on the Heat Generated at the External Root Surface during Root Canal Obturation Using Warm Vertical Compaction Technique with System B Heat Source

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The effect of an Er,Cr:YSGG laser on external adaptation of healthy and decayed cavities

The aim of this study was to evaluate the influence of chlorhexidine and Er, Cr:YSGG laser irradiation on the bond strength and external adaptation in mixed healthy and caries-affected class V cavities before and after thermal cycling. Thirty-six cavity preparations were made in mixed class V buccal human molars, half of them being artificially caries-induced. Any remaining affected dentin was removed from the cavity with a round burr at low speed. The teeth were divided into six groups, according to cleaning agent for both healthy and caries-induced dentin: no treatment, chlorhexidine and erbium, chromium-doped: yttrium, scandium, gallium, garnet (Er,Cr:YSGG) laser irradiation. A Filtek P90 (3M ESPE, St Paul, MN, USA) silorane adhesive restorative system was used. The specimens were subjected to 5000 thermal cycles (5-55 degrees C 60 min). Epoxy replicas were obtained to characterize the external adaptation under scanning electron microscopy. The average percentages of non-continuous margins were 5.41% and 6.49% in enamel dentin before thermal cycling and 25% and 33.7% after thermal cycling, respectively. The caries-affected and laser irradiated cavities showed higher non-continuous margins. Thermal cycling was able to raise the percentage of non-continuous margin for all groups. Chlorhexidine did not affect the marginal adaptation results, and the Er,Cr:YSGG laser irradiation showed significantly worse results compared with the control group.

Reference Gene Selection for Gene Expression Analysis of Oocytes Collected from Dairy Cattle and Buffaloes during Winter and Summer

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bending of Layer-by-Layer Films Driven by an External Magnetic Field

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Study of the external female genitalia of 14 Rhodnius species (Hemiptera, Reduviidae, Triatominae) using scanning electron microscopy

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Use of a type IIB external skeletal fixator in experimental tarsocrural arthrodesis in dogs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Endovascular Treatment of Spontaneous Isolated Common and External Iliac Artery Dissections with Preservation of Pelvic Blood Flow

Spontaneous isolated dissection of iliac arteries is very rare, with few reports in the literature. Medical, surgical, and endovascular treatment modalities have all been used to manage iliac artery dissections. We report a case of symptomatic, isolated, spontaneous dissection of the common iliac and external iliac arteries. Both dissections were successfully treated by separate percutaneous stent-graft placement, preserving hypogastric artery flow. This technique is interesting because it provides adequate sealing of proximal and distal dissection sites while preserving hypogastric artery and pelvic flow.

External apical root resorption in retracted incisors

AIM: To evaluate the occurrence of external apical root resorption (EARR) in the incisors after anterior retraction in corrective orthodontic treatment with first premolar extractions and whether it was related with the type of root apex movement and its inclination. METHOD: The maxillary and mandibular incisors of 22 patients (12 to 25 years of age; 9 males and 13 females) were treated with fixed appliances and premolar extraction. EARR was defined as the difference in root length before and after incisal retraction on periapical radiographs. Distortion of radiographic images and changes due to incisal tipping were controlled for. Pre- and post-incisal retraction lateral cephalometric radiographs established the relationship between EARR and the tipping of the incisors, along with the vertical, horizontal, and total movement of the root apex. RESULTS: There was significant EARR (1.51 to 2.37 mm) during incisor retraction, but this was not related to the movement or the tipping of the root apex of almost all teeth. It was observed that after the retraction stage, EARR occurred in all evaluated incisors, but it was more significant (P < .05) in the mandibular right lateral incisor. CONCLUSION: The EARR that did occur was unrelated to movement or tipping of the root apex, except for the vertical root apex movement of the mandibular left central incisor and the inclination of the maxillary right lateral incisor.

Effects of Er, Cr:YSGG laser irradiation on external adaptation of restorations in caries-affected cavities

This study evaluated the effect of Er,Cr:YSGG laser irradiation on the external adaptation of composite resin restorations in caries-affected cavities. Mixed class V cavity preparations were performed in 36 intact human third molars, in half of which caries was artificially induced. Both healthy and carious dentin were etched with 35% phosphoric acid (Ultradent Products Inc., South Jordan, Utah, USA), and the teeth were divided into three groups, i.e., (a) untreated etched dentin, (b) application of the Er, Cr:YSGG laser and (c) use of chlorhexidine as an adjunct in the bonding process. Restorations were fabricated with Z350 XT FiltekTM composite resin (3M ESPE) and subsequently the specimens were subjected to thermocycling to simulate artificial ageing. Quantitative analysis of external adaptation was performed by scanning electron microscopy in both healthy and affected dentin using epoxy resin replicas. It was concluded that the application of laser and chlorhexidine did not affect the percentages of marginal adaptation of class V restorations. Furthermore, thermocycling may influence adaptation values.