Undersökning av steady state och utvärdering av valskraft och friktion vid kallvalsning av aluminium

The purpose with this thesis was to examine the cold rolling mill located at Högskolan Dalarna and to stabilize the rolling process, to achieve steady state. Experiments with cold rolling of an aluminium strip have given results for rolling force, friction, reduction, strip tension and strain hardening. Results show that steady state has been found for the experiments with roll force and strain hardening, and not been found for the experiments with friction and reduction. Results show that increased strip tension gives lower roll forces. The roll force equation of Stone shows comparable results with reality for dry contact with reductions up to 30 %, but starts being incomparable with higher reductions. The roll force equation of Stone shows a bit higher roll forces than reality gave, but was comparable within reductions from 13 to 50 %. Experiments have shown that the aluminium strip has gone through strain hardening. Experiments show how the set roll gap did not yield the desired thickness reduction, there for the elastic spring constant for the rolling mill was examined and determined to be 417 N / mm for the specific alloy band. The influence of tension strip for roll force was examined and Results confirm the theory about how the roll force is decreased by increasing tension strip. The work rolls started to slip against the alumina strip as high tension strip; 70 N/mm2, gave low roll force; < 15kN.

Wear of coated and uncoated PCBN cutting tool used in turning and milling

This licentiate thesis has the main focus on evaluation of the wear of coated and uncoated polycrystalline cubic boron nitride cutting tool used in cutting operations against hardened steel. And to exam the surface finish and integrity of the work material used. Harder work material, higher cutting speed and cost reductions result in the development of harder and more wear resistance cutting tools. Although PCBN cutting tools have been used in over 30 years, little work have been done on PVD coated PCBN cutting tools. Therefore hard turning and hard milling experiments with PVD coated and uncoated cutting tools have been performed and evaluated. The coatings used in the present study are TiSiN and TiAlN. The wear scar and surface integrity have been examined with help of several different characterization techniques, for example scanning electron microscopy and Auger electron spectroscopy.   The results showed that the PCBN cutting tools used displayed crater wear, flank wear and edge micro chipping. While the influence of the coating on the crater and flank wear was very small and the coating showed a high tendency to spalling. Scratch testing of coated PCBN showed that, the TiAlN coating resulted in major adhesive fractures. This displays the importance of understanding the effect of different types of lapping/grinding processes in the pre-treatment of hard and super hard substrate materials and the amount and type of damage that they can create. For the cutting tools used in turning, patches of a adhered layer, mainly consisting of FexOy were shown at both the crater and flank. And for the cutting tools used in milling a tribofilm consisting of SixOy covered the crater. A combination of tribochemical reactions, adhesive wear and mild abrasive wear is believed to control the flank and crater wear of the PCBN cutting tools. On a microscopic scale the difference phases of the PCBN cutting tool used in turning showed different wear characteristics. The machined surface of the work material showed a smooth surface with a Ra-value in the range of 100-200 nm for the turned surface and 100-150 nm for the milled surface. With increasing crater and flank wear in combination with edge chipping the machined surface becomes rougher and showed a higher Ra-value. For the cutting tools used in milling the tendency to micro edge chipping was significant higher when milling the tools steels showing a higher hard phase content and a lower heat conductivity resulting in higher mechanical and thermal stresses at the cutting edge.

Influence of a prudent diet on circulating cathepsin S in humans

BACKGROUND: Increased circulating cathepsin S levels have been linked to increased risk of cardiometabolic diseases and cancer. However, whether cathepsin S is a modifiable risk factor is unclear. We aimed to investigate the effects of a prudent diet on plasma cathepsin S levels in healthy individuals. FINDINGS: Explorative analyses of a randomized study were performed in 88 normal to slightly overweight and hyperlipidemic men and women (aged 25 to 65) that were randomly assigned to ad libitum prudent diet, i.e. healthy Nordic diet (ND) or a control group (habitual Western diet) for 6 weeks. Whereas all foods in the ND were provided, the control group was advised to consume their habitual diet throughout the study. The ND was in line with dietary recommendations, e.g. low in saturated fats, sugars and salt, but high in plant-based foods rich in fibre and unsaturated fats.The ND significantly decreased cathepsin S levels (from 20.1 (+/-4.0 SD) to 19.7 μg/L (+/-4.3 SD)) compared with control group (from 18.2 (+/-2.9 SD) to 19.1 μg/L (+/-3.8 SD)). This difference remained after adjusting for sex and change in insulin sensitivity (P = 0.03), and near significant after adjusting for baseline cathepsin S levels (P = 0.06), but not for change in weight or LDL-C. Changes in cathepsin S levels were directly correlated with change in LDL-C. CONCLUSIONS: Compared with a habitual control diet, a provided ad libitum healthy Nordic diet decreased cathepsin S levels in healthy individuals, possibly mediated by weight loss or lowered LDL-C. These differences between groups in cathepsin S were however not robust and therefore need further investigation.

Salmoninae Commensal Bacteria Show a Positive Correlation Between Antibiotic Resistance and Mercury Resistance Profiles

Bacterial isolates from natural sites with high toxic and heavy metal contamination more frequently contain determinants for resistance to antimicrobials. Natural strains were isolated from the ingesta and external slime of Salmo salar (Linnaeus, 1758) and Salvelinusjontinalis (Mitchell, 1814). Fish specimens were acquired from Casco Bay hatcheries, Casco, ME where there is no history of antibiotic use. Seventy-nine bacterial strains, including many well-documented salmonid commensals (an association from which the fish derives no benefit), were identified using 165 rRNA gene sequencing. Mercury resistant isolates were selected for initially on 25μM HgCI2. Strains were then grown at 20-24°C on Trypticase Soy Agar (TSA) plates containing 0-1000μM HgCl2 or 0-130μM Phenyl Mercuric Acetate (PMA). Mercury in the hatchery feed water due to ubiquitous non-point source deposition has selected for the mercury resistance observed in bacterial strains. Antibiotic resistance determinations, as measured by Minimum Inhibitory Concentration MIC) assays were performed on the 79 bacterial isolates using Sensititrel antimicrobial susceptibility panels. A positive linear correlation between the mercury (pMA and HgCl2) MIC's and antibiotic resistance for all observed strains was demonstrated. Conjugation experiments with Pseudomonas, Aeromonas, and Azomonas donors confirmed phenotypic transfer of penicillin and cephem resistances to Escherichia coli DH5a recipients. Conjugation experiments with Pseudomonas donors showed minimal transfer of tetracycline and minoglycoside resistances to Escherichia coli DH5a recipients. Our study suggests that the accumulation of antimicrobial resistances observed in these natural bacterial populations may be due to the indirect selective pressure exerted by environmental mercury.

“The True University of these Days Is a Collection of …” eBooks?!

We do live in interesting times, don’t we? This is especially true of those of us who spend most of our working lives in libraries. The last ten years have been so filled with change that it’s almost become a byword: if you don’t like something, just wait a few hours and it will change. This isn’t a complaint, just an observation.

Contribuição ao estudo da inibição da corrosão do aço comum por borato, em soluções diluídas

Este trabalho teve por objetivo determinar a ação inibidora do íon borato na corrosão do aço-carbono, em soluções aquosas aproximadamente neutras, arejadas e desarejadas, na presença ou não de ions cloreto, à temperatura ambiente. Através do traçado de curvas de polarização potenciostáticas, de experimentos cronopotenciométricos e cronogalvanométricos, com ou sem riscagem do corpo de prova, e do comportamento do aço comum em ensaios de imersão a longo prazo, concluiu-se que o ion borato possui uma ação inibidora sobre a corrosão do aço, desde que o potencial não seja muito elevado. Observou-se também que o aço sofre corrosão por pites em soluções de borato, mesmo na ausência de íons agressivos e que os pites ocorrem em potenciais tanto mais baixos quanto mais diluídas forem as soluções de borato. Para soluções contendo 1000 ppm de bórax ou mais, o potencial de pite, determinado por técnicas cronopotenciométricas, está acima do potencial de corrosão. Para soluções com concentrações iguais ou superiores a 5000 ppm de bórax, não foi detectada corrosão por pites na faixa de potencial estudada, isto é, desde o potencial de evolução de H2 até o potencial de evolução de 02. A adição de 100 ppm de NaCl à solução contendo 2500 ppm de bórax reduz o potencial de pite de aço comum, em relação ao seu valor na ausência de íon cloreto.

Estudos de caso : implantação de sistemas ERP - uma análise crítica à luz da metodologia de Project Management

Este documento constitui-se em uma dissertação de mestrado, requisito parcial para a obtenção do grau de Mestre em Gestão Empresaria e Pública. Este estudo procura mostrar que a adoção dessa nova tecnologia através de projetos de implantação de sistema de ERP não só mudam processos administrativos como também produtos, serviços e estruturas organizacionais e que a sua implantação se constitui em um grande projeto que envolve um número considerável de recursos e tempo das organizações. Este estudo procurar mostrar também que os impactos que tais projetos trazem, são mais fortemente sentidos ou não pela organização de acordo com uma série de fatores, entre eles, a resistência à mudança e o quanto a organização está preparada para enfrentar essas mudanças, o medo da perda do emprego pela adoção de uma nova tecnologia, problemas com a falta de comunicação das mudanças, questões relacionadas à cultura organizacional vigente, a falta de envolvimento da alta administração, entre outras. Para gerenciar todas essas variáveis, as organizações modernas adotam técnicas para garantir o sucesso da implantação dessas novas tecnologias. o estudo aqui proposto tem como objetivo determinar até que ponto a utilização de metodologias e de técnicas de Project Management é o suficiente para que esses projetos alcancem o sucesso esperado pelas organizações. A quantidade de variáveis que influenciam o resultado de um projeto são muitas e cada uma delas possui um papel importante que deve ser avaliado. As conclusões desta pesquisa demonstram que o sucesso de um projeto nem sempre se resume a atingir os objetivos inicialmente propostos, relativos ao cumprimento do prazo, escopo e custo de um projeto, conforme define a metodologia de Project Management. Outros aspectos considerados por essa metodologia, se melhor ou pior aplicados, também contribuem para o sucesso ou fracasso de um projeto de implantação de um sistema de ERP sendo o seu fracasso traduzido ou não, no cumprimento do prazo, do escopo inicialmente previsto ou no custo inicialmente calculado. Outros aspectos que não apenas a aplicação correta da metodologia de Project Management contribuem para os resultados alcançados pelo projeto.

State ownership and corporate governance

State ownership of publicly-traded corporations remains pervasive around the world, and has been increasing in recent years. Existing literature focuses on the implications of government ownership for corporate governance and performance at the firm level. This Article, by contrast, explores the different but equally important question of whether the presence of the state as a shareholder can impose negative externalities on the corporate law regime available to the private sector. Drawing from historical experiments with government ownership in the United States, Brazil, China, and Europe, this study shows that the conflict of interest stemming from the state’s dual role as a shareholder and regulator can influence the content of corporate laws to the detriment of outside investor protection and efficiency. It thus addresses a gap in the literature on the political economy of corporate governance by incorporating the political role of the state as shareholder as another mechanism to explain the relationship between corporate ownership structures and legal investor protection. Finally, this Article explores the promise of different institutional arrangements to constrain the impact of the state’s interests as a shareholder on the corporate governance environment, and concludes by offering several policy recommendations.

The price of threat: the role of identity-safe marketplaces in predicting intergroup price sensitivity

In field experiments with subjects living either inside or outside Brazilian slums (n=955), we show that consumers living in slums are less price sensitive, in opposition with recent price sensitivity research. Comparing slum and non-slum dwellers, we found that negatively stereotyped consumers (e.g. slum dwellers) were more likely to pay higher amounts for friendlier customer service when facing social identity threats (SITs) in marketplaces such as banks. The mechanism which makes them less price sensitive is related to the perception of how other people evaluate their social groups, and we argue that they pay more because they are seeking identity-safe commercial relationships. This work, besides extending the literature in SITs, presents a perspective for the exchange between economics and psychology on price sensitivity, showing that consumers living in slums are willing to pay more to avoid possibly social identity threating experiences.

Real-Time Visual SLAM Using Pre - Existing Floor Lines as Landmarks and a Single Camera

SANTANA, André M.; SANTIAGO, Gutemberg S.; MEDEIROS, Adelardo A. D. Real-Time Visual SLAM Using Pre-Existing Floor Lines as Landmarks and a Single Camera. In: CONGRESSO BRASILEIRO DE AUTOMÁTICA, 2008, Juiz de Fora, MG. Anais... Juiz de Fora: CBA, 2008.

De repente, tudo mudou de lugar: refletindo sobre metamorfose urbana e gentrificação em Mossoró-RN

This study aims at solidifying the theoretical bases to provide, above all, an explanation for this phenomenon which currently happens, with a scenario of social, political, economic and cultural transformations worldwide in medium cities. Nevertheless, because it has different dimensions from its transformation axes, gentrification comes with change, but also with the introduction of a new purpose in the space using and occupation, outlining in this context the identity of places from the formation of centralities with the presence of flows with social and economic dynamicsThe current forms of geographic space appropriation show the directions of the senses and ideological profile which recreates the meanings and uses of content and materials from descriptions of a historical past. However, today there is an economic context in the urban space which refers to a search of strategies for change, i.e., the acquisition of parameter aimed at meeting the demands of the relationship between capital and labor, which ends up overriding some actions for the specification of the transformation methods within the urban space to be explained by new needs and also by the agents from the value adding to their interests and investments. Thus, we assume that the appreciation/gentrification of urban spaces may or may not result from the building of a public space, since the dialogic structure as a place of political interaction externalize conflicts and disagreements in general; it keeps segregating spaces. As new spaces are transformed, the access to them tends to happen with particular restriction, whereas some places like parks, shopping malls, high-rise and horizontal condos are the scene for major professional and family events. In this context, the gentrification process is used to designate interventions in the urban environment, in certain city spaces which are considered central to public and private investments. A historical place is permitted to be presented as a scenario, a stage full of attractions, through the transformation process. Studying gentrification consists of an analysis of the underlying interests in the transformation of these areas, and especially of the assessment of the interest level in the private sector to partner in order to modify the landscape. Gentrification results from the transformation processes of capital, which influences the efforts and investments application in order to establish and achieve optimal economic growth, focusing on a location socio-culturally centered in the urban space. Thus, the urban social structure develops in the light of some questions that relate not only the cities growth but also environmental conditions it provides in cities like Mossoro, State of Rio Grande do Norte, Brazil 2005 a 2011.

Aplicação da metodologia de planejamento de experimentos para formulação de massas cerâmicas para telhas

Rio Grande do Norte State stands out as one great producer of structural clay of the brazilian northeastern. The Valley Assu ceramic tiles production stands out obtained from ilitics ball clays that abound in the region under study. Ceramics formulation and the design of experiments with mixture approach, has been applied for researchers, come as an important aid to decrease the number of experiments necessary to the optimization. In this context, the objective of this work is to evaluate the effects of the formulation, temperature and heating rate in the physical-mechanical properties of the red ceramic body used for roofing tile fabrication of the Valley Assu, using design of mixture experiments. Four clays samples used in two ceramics industry of the region were use as raw material and characterized by X-ray diffraction, chemical composition, differential thermal analysis (DTA), thermogravimetric analysis (TGA), particle size distribution analysis and plasticity techniques. Afterwards, they were defined initial molded bodies and made specimens were then prepared by uniaxial pressing at 25 MPa before firing at 850, 950 and 1050 ºC in a laboratory furnace, with heating rate in the proportions of 5, 10 e 15 ºC/min. The following tecnologicals properties were evaluated: linear firing shrinkage, water absorption and flexural strength. Results show that the temperature 1050 ºC and heating rate of 5 ºC/min was the best condition, therefore presented significance in all physical-mechanical properties. The model was accepted as valid based of the production of three new formulations with fractions mass diferents of the initial molded bodies and heated with temperature at 1050 ºC and heating rate of 5 ºC/min. Considering the formulation, temperature and heating rate as variables of the equations, another model was suggested, where from the aplication of design of experiments with mixtures was possible to get a best formulation, whose experimental error is the minor in relation to the too much formulations

Cadmium availability and accumulation by lettuce and rice

Among the toxic elements, Cd has received considerable attention in view of its association with a number of human health problems. The objectives of this study were to evaluate the Cd availability and accumulation in soil, transfer rate and toxicity in lettuce and rice plants grown in a Cd-contaminated Typic Hapludox. Two simultaneous greenhouse experiments with lettuce and rice test plants were conducted in a randomized complete block design with four replications. The treatments consisted of four Cd rates (CdCl2), 0.0; 1.3; 3.0 and 6.0 mg kg(-1), based on the guidelines recommended by the Environmental Agency of the State of São Paulo, Brazil (Cetesb). Higher Cd rates increased extractable Cd (using Mehlich-3, Mehlich-1 and DTPA chemical extractants) and decreased lettuce and rice dry matter yields. However, no visual toxicity symptoms were observed in plants. Mehlich-1, Mehlich-3 and DTPA extractants were effective in predicting soil Cd availability as well as the Cd concentration and accumulation in plant parts. Cadmium concentration in rice remained below the threshold for human consumption established by Brazilian legislation. on the other hand, lettuce Cd concentration in edible parts exceeded the acceptable limit.

Efeitos por comparações e por experimento em interações de experimentos fatoriais

Avaliar efeitos de interações é um dos principais objetivos dos experimentos fatoriais. em experimentos com dois fatores A e B, com m e n níveis de cada fator, respectivamente, há m x n possíveis interações e (m-1)(n-1) graus de liberdade associados. Freqüentemente somente parte dessas interações contribui efetivamente para a Soma de Quadrados da Interação e pode ser interessante examiná-las. O uso de nível de significância menos rigoroso para interpretação do efeito da interação por experimento, em relação às demais fontes de variação da análise de variância, pode captar efeitos importantes. Recomenda-se o uso de p = 0,25 para a interpretação do efeito da interação por experimento, mantendo-se o usual p = 0,05 para efeitos por comparações. Mesmo no caso de interações significativas, comparações selecionadas, em lugar de apenas cortes, podem auxiliar a interpretação de interações complexas.

Controle alternativo de Colletotrichum acutatum agente causal da queda prematura dos frutos cítricos

A queda prematura dos frutos cítricos (QPFC), causada por Colletotrichum acutatum, dados os grandes prejuízos que têm causado aos produtores, constitui-se numa doença de grande importância econômica. O controle da doença é feito predominantemente mediante uso de fungicidas, que eleva o custo de produção e afeta negativamente o meio ambiente. Diante disso, este trabalho teve por objetivo buscar um método alternativo de controle da QPFC, mediante o uso de agentes de biocontrole ou de biofertilizantes. Diferentes concentrações de biofertilizantes (originários de duas fontes distintas e denominados de Bio1 e Bio 2); três isolados de Bacillus subtilis (ACB-69; 72 e 77) e três isolados de Trichoderma spp. (ACB-14; 37 e 39) foram testados, isoladamente ou em combinação, sob condições de laboratório, quanto à capacidade inibitória da germinação de conídios de C. acutatum. Estudaram-se, ainda, a produção de metabólitos termoestáveis por B. subtilis e o efeito sobre a germinação do patógeno. Quinze isolados de B. subtilis foram testados quanto à capacidade de prevenir a infecção por C. acutatum em flores destacadas de lima- ácida 'Tahiti' e, no campo, foram instalados dois experimentos, visando a testar ACBs e biofertilizantes no controle da doença. Verificou-se que o isolado ACB-72 (B. subtilis) e ACB-37 (T. pseudokoningii) foram os que mais inibiram a germinação do patógeno. Quanto à produção de metabólitos termoestáveis, ACB-69 e 77 foram os mais eficientes em produzir substâncias antifúngicas, e em quantidades suficientes para inibirem a germinação do patógeno. A mistura dos quatro isolados de Bacillus (ACBs: 69; 72; 77 e AP3) foi o que apresentou maior porcentagem de inibição (73%). Os biofertilizantes (Bio1 e Bio2), em concentrações acima de 10% e, quando em associação com isolados de Trichoderma spp., promoveram maiores inibições na germinação de C. acutatum. em testes com flores destacadas, verificou-se que, onde foram aplicados os ACBs 69; 76; 74 e 77, as porcentagens de pétalas sem sintomas de infecção por C. acutatum foram de 83; 92; 92 e 97%, respectivamente. Mediante avaliações a campo, verificou-se a potencialidade de B. subtilis e de biofertilizantes em controlar a doença.