The Sundarbans fishers coping in an overly stressed mangrove estuary

The fishing community of the Sundarbans are the human group most at home in the mud-slush-water-forest environment of this famous mangrove estuary. Their skills, knowledge, and technique have developed in response to a challenging environment. Yet, of the countless studies on the various aspects of this eco-region, there are exceedingly few that have studied the Sundarbans fisher in his/her ecological, historical and demographic context—as a key stakeholder in an environment under considerable stress. The present study seeks to reduce this lacuna a little. Its object is not merely to examine and analyse, but also to identify means, both tradition-based and innovative, which might contribute to protect the environment, improve economic conditions, and usher in people-based governance of resources.

Fish fauna of a coastal lagoon in Sri Lanka: distribution and seasonal variation

In this paper results of investigations carried out over the period of September 1977 to August 1978 are presented. These data were collected in the course of a detailed investigation into the biology and the eco-physiology of the young grey mullet and the grey mullet fishery of the Negombo Lagoon. In this paper the distribution and seasonal variation of fin fish species within the Negombo Lagoon are presented.

Fish-makhana (Euryale salisb) integration: a case study of sustainable aquafarming system in north Bihar

The paper deals with a technique to synchronize two crops, fish and makhana (Euryale ferox Salisb) in a pond. In such eco-friendly integration both crops are mutually benefited. Decomposed plant parts of makhana crop form organic matter that releases nutrients in the water to enhance plankton population. Organic detritus not only acts as food for bottom dwelling fishes (mrigal and common carp) but also provides a suitable substratum for the growth of zooplankton, insect larvae, nematodes and gastropods. Fishes contribute to the control of makhana pests. Their faecal matter acts as organic manure for makhana crop. Plankton population fluctuated between 1260 u/l to 4030 u/l in the control pond and 1630 u/l to 4722 u/l in the experimental pond. During the grand growth period of makhana crop (April to July) the dissolved oxygen content fluctuated between 5.02 mg/l to 6.68 mg/l in the covered areas and 6.04 mg/l to 6.92 mg/l in uncovered areas. Makhana leaves acting as blanket barrier over the water surface brought down the D.O. content in the covered areas of the pond. Free CO sub(2) content showed wider fluctuation in the experimental pond (25.2 mg/l to 30.9 mg/l) than in the control pond (25.1 mg/l to 28.6 mg/l). This could be due to decomposition of plant parts of the presiding crop lying as debris at the pond bottom. Autochthonous supply of nutrients enhanced the content of nitrogen, phosphorous and organic carbon in the soil of experimental pond. The experimental pond covering an area of 0.40 ha yielded 852 kg fish and 200 kg pops whereas the control pond covering the same area produced 777 kg fish only. The net profit per ha came out to be Rs.1,04,700 and Rs. 66,200 in integrated and non-integrated system respectively. Owing to crop diversification, the present integrated system was found to be more viable than the non-integrated system in terms of production and net profit.

浙江地方猪种线粒体DNA多态及遗传多样性研究

用ApaⅠ、AvaⅠ、BamHⅠ、BclⅠ、BglⅠ、BglⅡ、ClaⅠ、DraⅠ、Eco RI、Eco RV、HaeⅡ、HincⅡ、HindⅢ、HpaⅠ、KpnⅠ、PstⅠ、PvuⅠ、PvuⅡ、SacⅠ、SalⅠ、ScaⅠ、SmaⅠ、StuⅠ、XbaⅠ和XhoⅠ等25种识别6个碱基对的限制性内切酶分析了浙江地方品种猪、浙江野猪等30个个体的线粒体DNA,共检出30种限制性态型(morph),可归结成3种单倍型,其中BamHⅠ-B、BclⅠ-B、DraⅠ-B和XbaⅠ-C为首次发现;各单倍型间平均遗传距离(p)为0.005,群体的平均多态度(#pi#)为0.0008,均处于遗传多样性贫乏范围。

四川白鹅朗德鹅及杂交后代线粒体DNA多态研究

采用RFLP技术,对四川白鹅和朗德鹅及其杂交后代进行了线粒体DNA(mtDNA)多态分析。在所使用的19种限制性内切酶中,有4个酶(Eco RV、HaeII、HincII和KpnI)检测出多态,共获得两种mtDNA单倍型,四川白鹅和以四川白鹅为母本杂交后代的mtDNA为I型,朗德鹅的mtDNA为II型。以上结果为中国鹅和欧洲鹅存在两种不同起源学说提供了分子遗传学的证据。

How much do we spend to save? Calculating the embodied carbon costs of retrofit

The drive to reduce carbon emissions from domestic housing has led to a recent shift of focus from new-­‐build to retrofit. However there are two significant differences. Firstly more work is needed to retrofit existing housing to the same energy efficiency standards as new-­‐build. Secondly the remaining length of service life is potentially shorter. This implies that the capital expenditure – both financial and carbon -­‐ of retrofit may be disproportionate to the savings gained over the remaining life. However the Government’s definition of low and zero carbon continues to exclude the capital (embodied) carbon costs of construction, which has resulted in a lack of data for comparison. The paper addresses this gap by reporting the embodied carbon costs of retrofitting four individual pilot properties in Rampton Drift, part of an Eco-­‐Town Demonstrator Project in Cambridgeshire. Through collecting details of the materials used and their journeys from manufacturer to site, the paper conducts a ‘cradle-­‐to-­‐gate’ life cycle carbon assessment for each property. The embodied carbon figures are calculated using a software tool being developed by the Centre for Sustainable Development at the University of Cambridge. The key aims are to assess the real embodied carbon costs of retrofit of domestic properties, and to test the new tool; it is hoped that the methodology, the tool and the specific findings will be transferable to other projects. Initial changes in operational energy as a result of the retrofit works will be reported and compared with the embodied carbon costs when presenting this paper.

Development of a tool for rapidly assessing the implementation difficulty and emissions benefits of innovations

Consumer goods manufacturers aiming to reduce the environmental impact associated with their products commonly pursue incremental change strategies, but more radical approaches may be required if we are to address the challenges of sustainable consumption. One strategy to realize step change reductions is to prepare a portfolio of innovations providing different levels of impact reduction in exchange for different levels of organizational resource commitment. In this research a tool is developed to support this strategy, starting with the assumption that through brainstorming or other eco-innovation approaches, a long-list of candidate innovations has been created. The tool assesses the potential greenhouse gas benefit of an innovative option against the difficulty of its implementation. A simple greenhouse gas benefit assessment method based on streamlined LCA was used to analyze impact reduction potential, and a novel measure of implementation difficulty was developed. The predictions of implementation difficulty were compared against expert opinion, and showed similar results indicating the measure can be used sensibly to predict implementation difficulty. The assessment of the environmental gain versus implementation difficulty is visualized in a matrix, showing the trade-offs of several options. The tool is deliberately simple with scalar measures of CO 2 emissions benefits and implementation difficulty so tool users must remain aware of other potential environmental burdens besides greenhouse gases (e.g. water, waste). In addition, although relative life cycle emissions benefits of an option may be low, the absolute impact of an option can be high and there may be other co-benefits, which could justify higher levels of implementation difficulty. Different types of consumer products (e.g. household, personal care, foods) have been evaluated using the tool. Initial trials of the tool within Unilever demonstrate that the tool facilitates rapid evaluation of low-carbon innovations. © 2011 Elsevier Ltd. All rights reserved.

A comparison of four sustainable manufacturing strategies

Effective use of materials is one possible component of a sustainable manufacturing strategy. There are many such strategies proposed in the literature and used in practice, with confusion over what they are, what the differences among them may be and how they can be used by practitioners in design and manufacture to improve the sustainability of their product and processes. This paper reviews the literature on sustainable manufacturing strategies that deliver improved material performance. Four primary strategies were found: waste minimisation; material efficiency; resource efficiency; and eco-efficiency. The literature was analysed to determine the key characteristics of these sustainable manufacturing strategies and 17 characteristics were found. The four strategies were then compared and contrasted against all the characteristics. While current literature often uses these strategy titles in a confusing, occasionally inter-changeable manner, this study attempts to create clear separation between them. Definition, scope and practicality of measurement are shown to be key characteristics that impact upon the ability of manufacturing companies to make effective use of the proposed strategy. It is observed that the most actionable strategies may not include all of the dimensions of interest to a manufacturer wishing to become more sustainable, creating a dilemma between ease of implementation and breadth of impact. © 2008 Taylor & Francis.

PH-dependent leaching behaviour and other performance properties of cement-treated mixed contaminated soil

Portland cement has been widely used for stabilisation/solidification (S/S) treatment of contaminated soils. However, there is a dearth of literature on pH-dependent leaching of contaminants from cement-treated soils. This study investigates the leachability of Cu, Pb, Ni, Zn and total petroleum hydrocarbons (TPH) from a mixed contaminated soil. A sandy soil was spiked with 3000 mg/kg each of Cd, Cu, Pb, Ni and Zn, and 10,000 mg/kg of diesel, and treated with ordinary Portland cement (CEM I). Four different binder dosages, 5%, 10%, 15% and 20% (m/m) and different water contents ranging from 13%-19% dry weight were used in order to find a safe operating envelope for the treatment process. The pH-dependent leaching behaviour of the treated soil was monitored over an 84-day period using a 3-point acid neutralisation capacity (ANC) test. The monolithic leaching test was also conducted. Geotechnical properties such as unconfined compressive strength (UCS), hydraulic conductivity and porosity were assessed over time. The treated soils recorded lower leachate concentrations of Ni and Zn compared to the untreated soil at the same pH depending on binder dosage. The binder had problems with Pb stabilisation and TPH leachability was independent of pH and binder dosage. The hydraulic conductivity of the mixes was generally of the order, 10-8 m/sec, while the porosity ranged from 26%-44%. The results of selected performance properties are compared with regulatory limits and the range of operating variables that lead to acceptable performance described. © 2012 The Research Centre for Eco-Environmental Sciences, Chinese Academy of Sciences.

Life cycle assessments of biodegradable, commercial biopolymers - A critical review

Biopolymers are generally considered an eco-friendly alternative to petrochemical polymers due to the renewable feedstock used to produce them and their biodegradability. However, the farming practices used to grow these feedstocks often carry significant environmental burdens, and the production energy can be higher than for petrochemical polymers. Life cycle assessments (LCAs) are available in the literature, which make comparisons between biopolymers and various petrochemical polymers, however the results can be very disparate. This review has therefore been undertaken, focusing on three biodegradable biopolymers, poly(lactic acid) (PLA), poly(hydroxyalkanoates) (PHAs), and starch-based polymers, in an attempt to determine the environmental impact of each in comparison to petrochemical polymers. Reasons are explored for the discrepancies between these published LCAs. The majority of studies focused only on the consumption of non-renewable energy and global warming potential and often found these biopolymers to be superior to petrochemically derived polymers. In contrast, studies which considered other environmental impact categories as well as those which were regional or product specific often found that this conclusion could not be drawn. Despite some unfavorable results for these biopolymers, the immature nature of these technologies needs to be taken into account as future optimization and improvements in process efficiencies are expected. © 2013 Elsevier B.V. All rights reserved.

A literature and practice review to develop sustainable business model archetypes

Eco-innovations, eco-efficiency and corporate social responsibility practices define much of the current industrial sustainability agenda. While important, they are insufficient in themselves to deliver the holistic changes necessary to achieve long-term social and environmental sustainability. How can we encourage corporate innovation that significantly changes the way companies operate to ensure greater sustainability? Sustainable business models (SBM) incorporate a triple bottom line approach and consider a wide range of stakeholder interests, including environment and society. They are important in driving and implementing corporate innovation for sustainability, can help embed sustainability into business purpose and processes, and serve as a key driver of competitive advantage. Many innovative approaches may contribute to delivering sustainability through business models, but have not been collated under a unifying theme of business model innovation. The literature and business practice review has identified a wide range of examples of mechanisms and solutions that can contribute to business model innovation for sustainability. The examples were collated and analysed to identify defining patterns and attributes that might facilitate categorisation. Sustainable business model archetypes are introduced to describe groupings of mechanisms and solutions that may contribute to building up the business model for sustainability. The aim of these archetypes is to develop a common language that can be used to accelerate the development of sustainable business models in research and practice. The archetypes are: Maximise material and energy efficiency; Create value from 'waste'; Substitute with renewables and natural processes; Deliver functionality rather than ownership; Adopt a stewardship role; Encourage sufficiency; Re-purpose the business for society/environment; and Develop scale-up solutions. © 2014 The Authors. Published by Elsevier Ltd. All rights reserved.

Dietary-morphological relationships of fishes in Liangzi Lake, China

Species in Liangzi Lake were clustered into four trophic groups: Hemiramphus kurumeus and Hemiculter bleekeri bleekeri fed predominantly on terrestrial insects; Carassius auratus auratus and Abbottina rivularis on non-animal food; Hypseleotris swinhonis, Ctenogobius giurinus, Pseudorasbora parva and Toxabramis swinhonis on cladocerans or copepods; Culterichthys erythropterus on decapod shrimps. Gut length, mouth width, mouth height, gill raker length and gill raker spacing, varied widely among species. With the exception of three species pairs (H. swinhonis, C. glurinus; C. erythropterus, H. kurumeus; T. swinhonis, H. bleekeri bleekeri), principal components analysis of morphological variables revealed over-dispersion of species. Canonical correspondence analysis of dietary and morphological data revealed five significant dietary-morphological correlations. The first three roots explained > 85% of the total variance. The first root reflected mainly the relationship of gut length to non-animal feud, with an increase in gut length associated with an increase in non-animal food. The second root was influenced strongly by the relationship of the gill raker spacing to consumption of copepods, with an increase in gill raker spacing associated positively with copepods in the diet. The third root was influenced by the relationship of mouth gape to consumption of fish and decapod shrimps, with an increase in mouth gape associated with more fish and decapod shrimps in the diet. These significant dietary-morphological relationships supported the eco-morphological hypotheses that fish morphology influence food use, and morphological variation is important in determining ecological segregation of co-existing fish species. (C) 2001 The Fisheries Society of the British Isles.

黄土高原水土流失治理进展及其对策

黄土高原地区水土流失类型复杂,既有自然因素和人为因素,也有水力、风力、重力产生的变化。同时气候干旱、水资源缺乏成为植物生长和生态环境改善的最大障碍。在国家实施西部大开发的进程中,良好的生态环境成为生存与发展和建设小康社会的标志。无论从西部大开发的战略角度考虑,还是从退耕还林(草)政策实施8年以后,如何解决黄土高原地区人民群众衣食住行、经济发展问题及黄河减沙的角度来看,采取有效措施,加快该区的生态建设已势在必行。根据第十一个五年规划的建议,以生态恢复学和土壤侵蚀学的基本原理为指导,分析了黄土高原地区的重要性,探讨了黄土高原生态建设与经济发展的基本现状,因地制宜地提出了发展对策。

黄土高原半干旱区集雨补灌生态农业研究进展

黄土高原半干旱地区在中国旱作农业生产中占有重要地位。干旱缺水与水土流失并存是制约该区域经济发展的两大瓶颈因素。水保农业和径流农业两种旱作农业生产方式已趋于成熟,但对天然降水调控利用能力低下,难于实现农业生产的优质高产高效。集雨补灌生态农业是在继承水保农业和径流农业成功技术基础上,对降雨调控利用方式的进一步发展,它能在时间和空间两个方面实现降雨径流的富集叠加,能充分发挥环境资源与水肥光热因子的协同增效作用,大幅度提高农业生产力,实现同步缓解干旱缺水与水土流失双重目标。集雨补灌是黄土高原半干旱区农业可持续发展的一种综合模式和战略性措施,对黄土高原半干旱区生态型现代农业发展具有重要推动作用。