Thermo-optic variable optical attenuator with low power consumption fabricated on silicon-on-insulator by anisotropic chemical etching

A thermo-optic Mach-Zehnder (MZ) variable optical attenuator based on silicon waveguides with a large cross section was designed and fabricated on silicon-on-insulator (SOI) wafer. Multimode interferometers were used as power splitters and combiners in the MZ structure. In order to achieve a smooth interface, anisotropic chemical etching of silicon was used to fabricate the waveguides. Isolating grooves were introduced to reduce power consumption and device length. The device has a low power consumption of 210 mW and a response time of 50 mus. (C) 2004 Society of Photo-Optical Instrumentation Engineers.

Low power-consumption and high response frequency thermo-optic variable optical Attenuators based on silicon-on-insulator materials

A novel silicon-on-insulator thermo-optic variable optical attenuator with isolated grooves based on a multimode interference coupler principle is fabricated by the inductive coupled plasma etching technology. The maximum fibre-to-fibre insertion loss is lower than 2.2 dB, the dynamic attenuation range is from 0 to 30 dB in the wavelength range 1500-1600 nm, and the maximum power consumption is only 140 mW. The response frequency of the fabricated variable optical attenuator is about 30 kHz. Compared to the variable optical attenuator without isolated grooves, the maximum power consumption decreases more than 220 mW, and the response frequency rises are more than 20 kHz.

Fabrication and analysis of 2x2 thermo-optic SOI waveguide switch with low power consumption and fast response by anisotropy chemical etching

A low power consumption 2 x 2 thermo-optic switch with fast response was fabricated on silicon-on-insulator by anisotropy chemical etching. Blocking trenches were etched on both sides of the phase-shifting arms to shorten device length and reduce power consumption. Thin top cladding layer was grown to reduce power consumption and switching time. The device showed good characteristics, including a low switching power of 145 mW and a fast switching speed of 8 +/- 1 mus, respectively. Two-dimensional finite element method was applied to simulate temperature field in the phase-shifting arm instead of conventional one-dimensional method. According to the simulated result, a new two-dimensional index distribution of phase-shifting arm was determined. Consequently finite-difference beam propagation method was employed to simulate the light propagation in the switch, and calculate the power consumption as well as the switching speed. The experimental results were in good agreement with the theoretical estimations. (C) 2004 Elsevier B.V. All rights reserved.

A low power consumption thermo-optic variable optical attenuator based on SOI material

A SOI thenno-optic variable optical attenuator with U-grooves based on a multimode interference coupler principle is fabricated. The dynamic attenuation range is 0 to 29 dB; at the wavelength range between 1510 nm and 1610nm, and the maximum power consumption is only l30mW. Compared to the variable optical attenuator without U-groove, the maximum power consumption decreases more than 230mW

CO2浓度升高对三种树木叶片化学和舞毒蛾幼虫取食及生长的影响

探讨全球气候变化的生物学和生态学效应是当今生态学中的热点，研究大气CO2浓度升高对植物-昆虫相互作用关系的影响具有重要的理论和实践意义。本文使用开顶式气室（Open-top chamber，OTC）在野外条件下研究了CO2浓度升高对三种树木（小青杨、白桦和蒙古栎）叶片化学成分含量的影响，以及树木叶片品质变化对一种广食性森林昆虫（舞毒蛾）幼虫取食、生长发育和取食偏嗜性的影响。得出如下结果：（1）CO2浓度升高对3个受试树种叶片中的营养成分及次生代谢物含量均有显著影响，总体表现为氮含量降低，而碳氮比、非结构性碳水化合物、总酚和缩合丹宁含量增加。叶片中的化学成分含量可随时间发生显著变化，不同树种、甚至同一树种不同冠层高度的叶片对CO2浓度升高的响应强度也是不同的。叶片的干物质含量和比叶重对CO2浓度升高的响应不显著。（2）室内非选择性取食实验、室内选择性取食实验以及上树取食饲养方式下的多龄期取食实验，均发现高浓度CO2处理组内舞毒蛾幼虫的生长发育受到显著抑制。但对四龄舞毒蛾幼虫所进行的短期生物测定并未发现不同CO2浓度处理下幼虫的生长发育速率、对食物的取食率和转化率等昆虫营养指标存在显著差异。（3）叶片品质的降低是导致舞毒蛾幼虫生长发育受抑制的主要原因。但是总体上，CO2浓度升高导致的叶片品质变化并未显著影响幼虫的取食率和取食量。（4）舞毒蛾幼虫对不同叶片种类表现出清晰的取食选择性，这种选择性在其幼龄期就可表现出来。幼虫对小青杨上层叶片有最显著的偏嗜性，对蒙古栎下层叶片有最明显的拒食性。但是CO2浓度升高导致的叶片品质变化对舞毒蛾幼虫的取食选择性和寄主偏嗜行为并未产生显著影响。（5）检测出高浓度CO2处理组内舞毒蛾幼虫虫粪中含有浓度更高的植物次生代谢物质（总酚和缩合单宁），这很可能是昆虫整体生长发育受抑制的重要原因之一。

NEW METHODOLOGY FOR THE ESTIMATION OF ENERGY CONSUMPTION IN A DOUBLE-TUBE-SOCKET (DTS (R)) PNEUMATIC CONVEYING

A new methodology based on the use of CFD is proposed to estimate the energy consumptions in a DTS (DOUBLE-TUBE-SOCKET) pneumatic conveying. A simple computational program based on this methodology is developed. It can directly give the lowest energy consumption and the compatible gas consumption by only input the distance of conveying and the conveying tonnage. This computational program has been validated through our experimental work.