Effects of rotation in the laser-pulse photoassociation in a thermal gas of atoms

Photoassociation is a possible route for the formation of chemical bonds. In this process, the binding of colliding atoms can be induced by means of a laser field. Photoassociation has been studied in the ultracold regime and also with temperatures well above millikelvins in the thermal energy domain, which is a situation commonly encountered in the laboratory. A photoassociation mechanism can be envisioned based on the use of infrared pulses to drive a transition from free colliding atoms on the electronic ground state to form a molecule directly on that state. This work takes a step in this direction, investigating the laser-pulse-driven formation of heteronuclear diatomic molecules in a thermal gas of atoms including rotational effects. Based on the assumption of full system controllability, the maximum possible photoassociation yield is deduced. The photoassociation probability is calculated as a function of the laser parameters for different temperatures. Additionally, the photoassociation yield induced by subpicosecond pulses of a priori fixed shape is compared to the maximum possible yield.

Modular Hyperthermostable Bacterial Endo-beta-1, 4-Mannanase: Molecular Shape, Flexibility and Temperature-Dependent Conformational Changes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Er3+-doped Y2O3 obtained by polymeric precursor: Synthesis, structure and upconversion emission properties

The relentless pursuit for materials containing rare earth ions with photoluminescent properties has led to several studies with applications in the development of new technologies. The main focus of this work is the preparation of Er3+-doped polycrystalline Y2O3 with photoluminescent properties using PEG as an organic precursor and heat-treated at different temperatures. The methodology used in this synthesis is highly attractive due to its high feasibility for improved technology and low cost for preparing materials. The behavior of the viscous resin has been evaluated and the final compounds exhibited the formation of a cubic polycrystalline phase, which is able to support variations in Er3+ doping concentrations up to 10 mol%, without significant changes in the polycrystalline parameters. The values of the nanocrystallite size calculated by Scherrer's equation showed direct dependence on the heat-treatment temperature as well as the Er3+ concentration. Intense emission in the visible region under excitation at 980 nm was attributed to an upconversion phenomenon assigned to the intraconfigurational f-f transitions of Er3+ ions. The upconversion mechanism was investigated and it was demonstrated that the higher intense emission in the red region in comparison to the emission in the green region is related to the crystallite size. The studies about the intensity showed the dependence of upconversion emission of power source, indicating that two-photon are responsible for the green and red photoluminescence. These polycrystalline materials exhibit properties that make them promising for use in solar energy systems, C-telecom band or solid-state laser devices. (C) 2014 Elsevier B.V. All rights reserved.

Telenomus remus (Hymenoptera: Platygastridae) parasitism on eggs of Anticarsia gemmatalis (Lepidoptera: Eribidae) compared with its natural host Spodoptera frugiperda (Lepidoptera: Noctuidae)

The capacity of Telenomus remus to parasitize eggs of Anticarsia gemmatalis, compared with its natural host, Spodoptera frugiperda, was evaluated under different temperatures. The parasitoid T. remus was reared at 25 +/- 1 degrees C for a single generation on both hosts. After reaching the adult stage, they were allowed to parasitize both hosts to study parasitoid biology and parasitism capacity at temperatures between 19 degrees C and 37 +/- 1 degrees C. Egg-to-adult developmental time was similar on both hosts. The number of A. gemmatalis eggs parasitized was lower than that of S. frugiperda eggs at all temperatures. Parental female longevity of parasitoids was greater on A. gemmatalis eggs. This indicated a smaller metabolic expense during parasitism, a common feature observed on nonpreferable hosts. In general, sex ratio was little affected by temperature or hosts. When parental T. remus were reared on A. gemmatalis before the experiment, base temperature (Tb) and the thermal constant (K) were 9.53 degrees C and 209.57 DD on eggs of A. gemmatalis and 9.68 degrees C and 197.79 DD on eggs of S. frugiperda, respectively. When parental T. remus were reared on S. frugiperda eggs, Tb and K were 10.12 degrees C and 188.46 DD and 9.69 degrees C and 190.24 DD for the evaluated host eggs of A. gemmatalis and S. frugiperda, respectively. Therefore, T. remus develops in eggs of A. gemmatalis. This can be beneficial for its use in field crops where outbreaks of both Spodoptera spp. and A. gemmatalis occur. However, A. gemmatalis is a less favorable host for the parasitoid development.

Implications of Surface and Bulk Properties of Abutment Implants and Their Degradation in the Health of Periodontal Tissue

The aim of the current review was to investigate the implications of the surface and bulk properties of abutment implants and their degradation in relation to periodontal health. The success of dental implants is no longer a challenge for dentistry. The scientific literature presents several types of implants that are specific for each case. However, in cases of prosthetics components, such as abutments, further research is needed to improve the materials used to avoid bacterial adhesion and enhance contact with epithelial cells. The implanted surfaces of the abutments are composed of chemical elements that may degrade under different temperatures or be damaged by the forces applied onto them. This study showed that the resulting release of such chemical elements could cause inflammation in the periodontal tissue. At the same time, the surface characteristics can be altered, thus favoring biofilm development and further increasing the inflammation. Finally, if not treated, this inflammation can cause the loss of the implant.

Ability of Salmonella spp. to Produce Biofilm Is Dependent on Temperature and Surface Material

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Taxonomic studies on Mucor inaequisporus, isolated for the first time in South America

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Production and Characterization of a Milk-clotting Protease Produced in Submerged Fermentation by the Thermophilic Fungus Thermomucor indicae-seudaticae N31

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Temperature and storage period over spermatic parameters of jundia, Rhamdia quelen (Quoy & Gaimard, 1824)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Crescimento compensatório em linhagens de tilápia do Nilo (Oreochromis niloticus L.) cultivadas em ambiente resfriado: morfologia muscular e expressão de genes relacionados ao crescimento muscular

Pós-graduação em Aquicultura - FCAV

Contribuição à caracterização nanoestrutural por saxs de sonogéis de sílica obtidos por processo sol-gel

As características estruturais de sonogéis obtidos a partir da hidrólise ácida do TEOS estimulada por ultrasom foram estudadas por espalhamento de raios-x a baixo ângulo (SAXS). O estudo inclui: i) o processo de agregação em diferentes temperaturas; ii) o envelhecimento dos géis úmidos na fase líquida de preparação e depois da troca da fase líquida por álcool e acetona; iii) a secagem dos géis; iv) a estrutural evolução de xerogéis e aerogéis com o tratamento térmico até 1100 oC; e v) um estudo comparativo usando SAXS e adsorção de nitrogênio na caracterização de aerogéis e xerogéis... (Resumo completo, clicar acesso eletrônico abaixo)

Reassessment of the potential applications of Eu3+-doped Y2O3 photoluminescent material in ceramic powder form

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Facile synthesis and characterization of ZrO2 nanoparticles prepared by the AOP/hydrothermal route

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Correlation between structural and electronic order-disorder effects and optical properties in ZnO nanocrystals

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo das propriedades mecânicas do aço SAE 1312 modificado ao nióbio

The study of mechanical properties of high-alloy special steels is of great interest of the steel industry due to the great demand by companies that manufacture automotive components of high criticality, and also because of its high commercial value. However, the development of this type of alloy metals demand highly technical knowledge. Among these extremely important kinds of steel, the subject which is the interest of this study is the special steel modified by niobium. The manganese and niobium are the main alloying elements in the composition of these steels, both of them increase the stability of the austenite region, however, manganese increases the hardenability and tensile yield strength, and niobium increases the mechanical strength and promotes refining the grain. The mechanical characterization of steel SAE 1312 modified the niobium was made in order to gain a better understanding of the influence on the mechanical properties caused by aging at different temperatures and for different reductions in the drawing of gauge material. This characterization was made by means of tensile test and hardness. This material showed an increase in yield strength and hardness when gauge with large reductions during the wiredrawing, but when subjected to aging temperatures higher than 300 ° C had a slight loss of these properties