859 resultados para Design for flexibility in use


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Objectives: To evaluate the effect of insertion torque on micromotion to a lateral force in three different implant designs. Material and methods: Thirty-six implants with identical thread design, but different cutting groove design were divided in three groups: (1) non-fluted (no cutting groove, solid screw-form); (2) fluted (901 cut at the apex, tap design); and (3) Blossomt (Patent pending) (non-fluted with engineered trimmed thread design). The implants were screwed into polyurethane foam blocks and the insertion torque was recorded after each turn of 901 by a digital torque gauge. Controlled lateral loads of 10N followed by increments of 5 up to 100N were sequentially applied by a digital force gauge on a titanium abutment. Statistical comparison was performed with two-way mixed model ANOVA that evaluated implant design group, linear effects of turns and displacement loads, and their interaction. Results: While insertion torque increased as a function of number of turns for each design, the slope and final values increased (Po0.001) progressively from the Blossomt to the fluted to the non-fluted design (M +/- standard deviation [SD] = 64.1 +/- 26.8, 139.4 +/- 17.2, and 205.23 +/- 24.3 Ncm, respectively). While a linear relationship between horizontal displacement and lateral force was observed for each design, the slope and maximal displacement increased (Po0.001) progressively from the Blossomt to the fluted to the non-fluted design (M +/- SD 530 +/- 57.7, 585.9 +/- 82.4, and 782.33 +/- 269.4 mm, respectively). There was negligible to moderate levels of association between insertion torque and lateral displacement in the Blossomt, fluted and non-fluted design groups, respectively. Conclusion: Insertion torque was reduced in implant macrodesigns that incorporated cutting edges, and lesser insertion torque was generally associated with decreased micromovement. However, insertion torque and micromotion were unrelated within implant designs, particularly for those designs showing the least insertion torque.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

OBJETIVOS: A partir de acervo de 200 textos acadêmicos e de documentos de organismos nacionais e internacionais voltados ao controle da hanseníase publicados no período de 1999 a 2008, procurou-se estudar respectivas possibilidades evolutivas futuras, empregando-se os subsídios do recurso de análise de cenários. MÉTODOS: A reconstrução metodológica adotada foi de natureza qualitativa, fulcrada nas técnicas de revisão bibliográfica e análise de conteúdo. Esta última foi empregada na tipificação documental categorial frequencial contigencial, de acordo com devida fundamentação pertinente. RESULTADOS: Recuperaram-se elementos atuais importantes de natureza epidemiológica e operacional, bem como de respectivas perspectivas. CONCLUSÕES: Projeta-se que a manutenção dos coeficientes de incidência da doença coloca reptos econômicos e sanitários a desafiar desde o modelo neoliberal de organização societária mundial até competências específicas das ações das equipes de saúde em campo.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Since the mid 1980s the Atomic Force Microscope is one the most powerful tools to perform surface investigation, and since 1995 Non-Contact AFM achieved true atomic resolution. The Frequency-Modulated Atomic Force Microscope (FM-AFM) operates in the dynamic mode, which means that the control system of the FM-AFM must force the micro-cantilever to oscillate with constant amplitude and frequency. However, tip-sample interaction forces cause modulations in the microcantilever motion. A Phase-Locked loop (PLL) is used to demodulate the tip-sample interaction forces from the microcantilever motion. The demodulated signal is used as the feedback signal to the control system, and to generate both topographic and dissipation images. As a consequence, a proper design of the PLL is vital to the FM-AFM performance. In this work, using bifurcation analysis, the lock-in range of the PLL is determined as a function of the frequency shift (Q) of the microcantilever and of the other design parameters, providing a technique to properly design the PLL in the FM-AFM system. (C) 2011 Elsevier B.V. All rights reserved.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

O nitrogênio é o nutriente exigido em maior quantidade pelo feijoeiro e, mesmo quando suprida adequadamente desse nutriente, a planta de feijão pode ter sua produtividade limitada pela deficiência de molibdênio, pela participação deste no metabolismo do nitrogênio. O objetivo deste trabalho foi avaliar a resposta do feijoeiro (Phaseolus vulgaris L.), cultivar 'BRS Pontal', irrigado, à aplicação de nitrogênio em cobertura e molibdênio via foliar, quando cultivado em Neossolo Quartzarênico, no município de Cassilândia, MS. O delineamento experimental foi o de blocos ao acaso, no esquema fatorial 4x2, com quatro repetições. Os tratamentos foram constituídos de quatro doses de nitrogênio (0, 30, 60 e 120 kg ha-1) aplicados em cobertura, utilizando como fonte a ureia, e pela aplicação ou não de molibdênio (80 g ha-1) via foliar, na forma de molibdato de amônio. O índice relativo de clorofila nas folhas do feijoeiro foi aumentado pela aplicação de nitrogênio em cobertura e molibdênio via foliar. A aplicação de nitrogênio em cobertura proporcionou aumento na produtividade de grãos do feijoeiro apenas quando combinado com o fornecimento de molibdênio via foliar. O fornecimento de 80 g ha-1 de molibdênio via foliar aumentou a eficiência de utilização do nitrogênio pelo feijoeiro.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Antiretroviral resistance mutations (ARM) are one of the major obstacles for pharmacological human immunodeficiency virus (HIV) suppression. Plasma HIV-1 RNA from 306 patients on antiretroviral therapy with virological failure was analyzed, most of them (60%) exposed to three or more regimens, and 28% of them have started therapy before 1997. The most common regimens in use at the time of genotype testing were AZT/3TC/nelfinavir, 3TC/D4T/nelfinavir and AZT/3TC/efavirenz. The majority of ARM occurred at protease (PR) gene at residue L90 (41%) and V82 (25%); at reverse transcriptase (RT) gene, mutations at residue M184 (V/I) were observed in 64%. One or more thymidine analogue mutations were detected in 73%. The number of ARM at PR gene increased from a mean of four mutations per patient who showed virological failure at the first ARV regimens to six mutations per patient exposed to six or more regimens; similar trend in RT was also observed. No differences in ARM at principal codon to the three drug classes for HIV-1 clades B or F were observed, but some polymorphisms in secondary codons showed significant differences. Strategies to improve the cost effectiveness of drug therapy and to optimize the sequencing and the rescue therapy are the major health priorities.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Na composição do substrato para produção de mudas de mamoeiro, recomenda-se o uso de adubação orgânica, que traz como vantagens a melhoria das características físicas, químicas e biológicas do solo, criando um ambiente favorável ao desenvolvimento inicial das mudas, bem como boa resposta do mamoeiro. Os materiais orgânicos desempenham ainda um importante papel na nutrição das plantas como fornecedores de nutrientes. Contudo, observa-se que existe uma grande variação nas recomendações e quase sempre a adubação orgânica está associada à adubação mineral. Neste contexto, o objetivo deste trabalho foi o de verificar os efeitos do uso de esterco de curral associado ou não à adubação mineral no substrato sobre a formação de mudas de mamoeiro. O Experimento foi conduzido na FEP/UNESP/Câmpus de Ilha Solteira-SP. O delineamento utilizado foi em blocos, em esquema de parcelas subdivididas, sendo parcelas as cultivares e subparcelas os substratos. Cada parcela com 5 repetições e 10 plantas úteis por subparcela. Para a comparação das médias, utilizou-se o teste de Tukey. Com base nos resultados obtidos, pode-se concluir que: a) Na formação das mudas de mamoeiro, o esterco de curral pode ser utilizado sem a necessidade de adubação mineral com o superfosfato simples e o cloreto de potássio; b) O esterco de curral foi capaz de fornecer às mudas de mamoeiro os nutrientes N, P, K, Ca, Mg e Cu, necessários para seu desenvolvimento até o transplantio para o campo.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

O uso de microrganismos é uma alternativa para o controle de doenças em plantas. Todavia, é prudente verificar a interação desse com os demais métodos de controle empregados em determinada cultura. Dessa forma, objetivou-se avaliar a fungitoxicidade dos herbicidas sobre o crescimento e desenvolvimento dos isolados de Trichoderma spp. Utilizou-se o delineamento inteiramente casualizado, em esquema fatorial 6 x 6 x 4, com quatro repetições. O fator A correspondeu aos herbicidas pendimethalin, clomazone, carfentrazone-ethyl, oxadiazon, thiobencarb + propanil e byspiribac-sodium; o fator B, às doses dos herbicidas - 0, 25, 50, 75, 100 e 200% da dose recomendada; e o fator C, aos isolados de Trichoderma spp. AJAM 18, CE 66, TRI 01 e TRI 02. O ensaio foi realizado em condições in vitro; avaliaram-se o crescimento micelial radial (CMR) e a esporulação dos isolados após aplicação dos herbicidas. Observaram-se diferenças de sensibilidade dos isolados para o mesmo produto testado. O oxadiazon reduziu o CMR dos isolados AJAM 18 e TRI 01 em 66 e 35%, respectivamente. No entanto, reduziu apenas 16% do CMR do isolado TRI 02 e não alterou o CMR do isolado CE 66 mesmo em 200% da dose recomendada. Verificaram-se diferentes efeitos dos produtos em cada isolado. A mistura comercial de thiobencarb+propanil foi altamente tóxica aos isolados de Trichoderma spp., com reduções em torno de 85% no CMR e no número de esporos. Por outro lado, o byspiribac-sodium pouco afetou os isolados, apresentando reduções inferiores a 10% no CMR e na esporulação. O carfentrazone-ethyl e byspiribac-sodium demonstraram ser compatíveis com os isolados de Trichoderma spp. estudados.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

O nitrogênio é o nutriente mais exigido pelo feijoeiro e seu metabolismo pode ser seriamente prejudicado pela deficiência de molibdênio. Conduziu-se este trabalho, com o objetivo de avaliar o efeito da aplicação de molibdênio via semente e nitrogênio em cobertura nas características agronômicas e produtividade do feijoeiro 'BRS Pontal' irrigado, cultivado em Neossolo Quartzarênico, no município de Cassilândia, MS. O delineamento experimental utilizado foi o de blocos casualizados, no esquema fatorial 4x2, com quatro repetições. Os tratamentos foram constituídos pela aplicação ou não de Mo (80 g ha-1) via semente e quatro doses de N (0, 30, 60 e 120 kg ha-1), em cobertura aos 16 dias, após a emergência, na forma de uréia. A aplicação de Mo via semente aumentou o índice relativo de clorofila, o número de vagens por planta, a massa e a produtividade de grãos no feijoeiro, principalmente com o uso de altas doses de N em cobertura. O índice relativo de clorofila, o número de vagens por planta, a massa e a produtividade de grãos do feijoeiro foi aumentada linearmente pela aplicação de até 120 kg ha-1 de N em cobertura. O fornecimento de Mo via tratamento de semente aumentou a eficiência de utilização do N pelo feijoeiro.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Variance dispersion graphs have become a popular tool in aiding the choice of a response surface design. Often differences in response from some particular point, such as the expected position of the optimum or standard operating conditions, are more important than the response itself. We describe two examples from food technology. In the first, an experiment was conducted to find the levels of three factors which optimized the yield of valuable products enzymatically synthesized from sugars and to discover how the yield changed as the levels of the factors were changed from the optimum. In the second example, an experiment was conducted on a mixing process for pastry dough to discover how three factors affected a number of properties of the pastry, with a view to using these factors to control the process. We introduce the difference variance dispersion graph (DVDG) to help in the choice of a design in these circumstances. The DVDG for blocked designs is developed and the examples are used to show how the DVDG can be used in practice. In both examples a design was chosen by using the DVDG, as well as other properties, and the experiments were conducted and produced results that were useful to the experimenters. In both cases the conclusions were drawn partly by comparing responses at different points on the response surface.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Wind-excited vibrations in the frequency range of 10 to 50 Hz due to vortex shedding often cause fatigue failures in the cables of overhead transmission lines. Damping devices, such as the Stockbridge dampers, have been in use for a long time for supressing these vibrations. The dampers are conveniently modelled by means of their driving point impedance, measured in the lab over the frequency range under consideration. The cables can be modelled as strings with additional small bending stiffness. The main problem in modelling the vibrations does however lay in the aerodynamic forces, which usually are approximated by the forces acting on a rigid cylinder in planar flow. In the present paper, the wind forces are represented by stochastic processes with arbitrary crosscorrelation in space; the case of a Kármán vortex street on a rigid cylinder in planar flow is contained as a limit case in this approach. The authors believe that this new view of the problem may yield useful results, particularly also concerning the reliability of the lines and the probability of fatigue damages. © 1987.