A narrative review on the reduction of effective dose to a paediatric patient by using different combinations of kVp, mAs and additional filtration whilst maintaining image quality

This paper reviews the literature for lowering of dose to paediatric patients through use of exposure factors and additional filtration. Dose reference levels set by The International Commission on Radiological Protection (ICRP) will be considered. Guidance was put in place in 1996 requires updating to come into line with modern imaging equipment. There is a wide range of literature that specifies that grids should not be used on paediatric patients. Although much of the literature advocates additional filtration, contrasting views on the relative benefits of using aluminium or copper filtration, and their effects on dose reduction and image quality can vary. Changing kVp and mAs has an effect on the dose to the patient and image quality. Collimation protects adjacent structures whilst reducing scattered radiation.

Reducing effective dose to a paediatric phantom by using different combinations of kVp, mAs and additional filtration whilst maintaining image quality

Purpose: To determine whether using different combinations of kVp and mAs with additional filtration can reduce the effective dose to a paediatric phantom whilst maintaining diagnostic image quality. Methods: 27 images of a paediatric AP pelvis phantom were acquired with different kVp, mAs and additional copper filtration. Images were displayed on quality controlled monitors with dimmed lighting. Ten diagnostic radiographers (5 students and 5 experienced radiographers) had eye tests to assess visual acuity before rating the images. Each image was rated for visual image quality against a reference image using 2 alternative forced choice software using a 5-point Likert scale. Physical measures (SNR and CNR) were also taken to assess image quality. Results: Of the 27 images rated, 13 of them were of acceptable image quality and had a dose lower than the image with standard acquisition parameters. Two were produced without filtration, 6 with 0.1mm and 5 with 0.2mm copper filtration. Statistical analysis found that the inter-rater and intra-rater reliability was high. Discussion: It is possible to obtain an image of acceptable image quality with a dose that is lower than published guidelines. There are some areas of the study that could be improved. These include using a wider range of kVp and mAs to give an exact set of parameters to use. Conclusion: Additional filtration has been identified as amajor tool for reducing effective dose whilst maintaining acceptable image quality in a 5 year old phantom.

Design and construction of tunnels in zones subjected to high convergences

The economic development of a region depends on the speed that people and goods can travel. The reduction of people and goods travel time can be achieved by planning smooth road layouts, which are obtained by crossing natural obstacles such as hills, by tunneling at great depths, and allowing the reduction of the road alignment length. The stress state in rock masses at such depths, either because of the overburden or due to the tectonic conditions of the rock mass induces high convergences of the tunnel walls. These high convergence values are incompatible with the supports structural performance installed in the excavation stabilization. In this article it is intended to evaluate and analyze some of the solutions already implemented in several similar geological and geotechnical situations, in order to establish a methodological principle for the design of the tunnels included in a highway section under construction in the region influenced by the Himalayas, in the state of Himachal Pradesh (India) and referenced by "four laning of Kiratpur to Ner Chowk section".

Geological and geotechnical surveys in tectonically active rock masses

The economic development of a region depends on the speed that people and goods can travel. The reduction of people and goods travel time can be achieved by planning smooth road layouts, which are obtained by crossing natural obstacles such as hills, by tunneling at great depths, and allowing the reduction of the road alignment length. The stress state in rock masses at such depths, either because of the overburden or due to the tectonic conditions of the rock mass induces high convergences of the tunnel walls. These high convergence values are incompatible with the supports structural performance installed in the excavation stabilization. In this article it is intended to evaluate and analyze some of the solutions already implemented in several similar geological and geotechnical situations, in order to establish a methodological principle for the design of the tunnels included in a highway section under construction in the region influenced by the Himalayas, in the state of Himachal Pradesh (India) and referenced by "four laning of Kiratpur to Ner Chowk section".

Simple Kinematic Design for Evading the Forced Oscillation of a Car-Wheel Suspension System

An adaptive control damping the forced vibration of a car while passing along a bumpy road is investigated. It is based on a simple kinematic description of the desired behavior of the damped system. A modified PID controller containing an approximation of Caputo’s fractional derivative suppresses the high-frequency components related to the bumps and dips, while the low frequency part of passing hills/valleys are strictly traced. Neither a complete dynamic model of the car nor ’a priori’ information on the surface of the road is needed. The adaptive control realizes this kinematic design in spite of the existence of dynamically coupled, excitable internal degrees of freedom. The method is investigated via Scicos-based simulation in the case of a paradigm. It was found that both adaptivity and fractional order derivatives are essential parts of the control that can keep the vibration of the load at bay without directly controlling its motion.

Proposta de solução de videovigilância para locais remotos

Desde tempos remotos que homens faziam a vigilância de bens e mercadorias e mais recentemente também de pessoas com o intuito de dissuadir roubos, atos de vandalismo e de violência. Nos últimos anos, com a evolução das novas tecnologias verificou-se a sua adoção para auxílio da vigilância. Os atos de terrorismo que têm acontecido um pouco por todo o mundo trouxeram um clima de insegurança à população mundial. Este fenómeno, juntamente com o elevado número de roubos e atos de violência levou à expansão de utilização dos meios de videovigilância de forma a dissuadir estes tipos de crime podendo mesmo, nalguns casos servir como prova para punir os autores dos mesmos. Em Portugal tem-se verificado uma escalada de crimes nas zonas mais rurais não só de bens como as alfaias agrícolas mas também de frutos e mesmo de animais. Estes crimes predominam em locais rurais, relativamente distantes das povoações e em locais onde não existem (ou são praticamente inexistentes) infraestruturas necessárias para implementar meios de videovigilância como a falta de rede elétrica e internet o que torna quase inviável a existência de sistemas de videovigilância nesses locais. Dotar esses locais das infra estruturas necessárias poderia tornar-se demasiado dispendioso e os vigilantes humanos poderiam correr riscos no meio dos montes ou noutros locais remotos para além dos seus elevados custos. Para além do problema dos roubos, existe um outro flagelo relacionado com os incêndios na floresta portuguesa, que todos os anos é dizimada pelo fogo devido a incêndios que surgem na sua maioria causados pelo homem sendo uma parte significativa os de origem criminosa. Para dar resposta a estes problemas e no sentido de vigiar e dissuadir estes tipos de crimes, iniciamos um estudo que pretende propor um protótipo de um sistema de videovigilância para locais remotos (SVR - Sistema de Videovigilância Remota) de baixo custo de forma a diminuir o número de crimes e assim minimizar os prejuízos económico e sociais causados pelos mesmos. Pretendemos estudar o problema e analisar tecnologias com potencial para propor uma solução que possa auxiliar a vigilância nesse tipo de locais com o pressuposto de poder vir a contribuir para a diminuição deste tipo de crimes devido ao seu efeito dissuasor pelo facto de se poder divulgar que estes locais já têm uma solução de vigilância oculta. A solução proposta contempla um sistema de videovigilância com uma camara construída com base num Raspberry Pi onde o vídeo é transmitido em streaming via Web através de comunicações móveis. A alimentação do sistema nestes espaços sem energia elétrica é feita através de um painel fotovoltaico. É proporcionado ao utilizador uma interface para visualizar o vídeo transmitido e um mecanismo de notificações por email. É ainda possível a visualização de imagens gravadas num cartão de memória relativas a ocorrências de deteção de movimentos. Foram realizados inúmeros testes ao protótipo SVR sendo os resultados obtidos aqui descritos.

Visual politics of the estado novo realized on the Alameda Dom Afonso Henriques in Lisbon – the construction of ideal citizenship?

The stylistic categorization of the Estado Novo has been intensely discussed by Portuguese art historians. The square Alameda Dom Afonso Henriques in Lisbon (Alameda) can be seen as paradigmatic for the architecture of power of the Estado Novo. The Alameda forms a gardened valley between two hills. There you find two prominent and highly propagandist buildings: The Instituto Superior Técnico (IST) and the Fonte Luminosa are dedicated to modern sciences and respectively to the harmonious contribution of nature to the city. The iconography of the Alameda as well as its incorporation into the propagandist use of urban planning in the 1930s and 1940s exemplify the visual politics during Salazarism. Urban planning programs intended to create cities that would preserve the character of a traditional catholic society and at the same time answer to the need to modernize the country and evoke the image of a progressive state. Thus, public buildings and urban squares such as the Alameda contributed to design a corporate image and to the ‘spirit’ of the regime.

Cross-scale determinants of palm species distribution

We investigate palm species distribution, richness and abundance along the Mokoti, a seasonally-dry river of southeastern Amazon and compare it to the patterns observed at a large scale, comprising the entire Brazilian territory. A total of 694 palms belonging to 10 species were sampled at the Mokoti River basin. Although the species showed diverse distribution patterns, we found that local palm abundance, richness and tree basal area were significantly higher from the hills to the bottomlands of the study region, revealing a positive association of these measures with moisture. The analyses at the larger spatial scale also showed a strong influence of vapor pressure (a measure of moisture content of the air, in turn modulated by temperature) and seasonality in temperature: the richest regions were those where temperature and humidity were simultaneously high, and which also presented a lower degree of seasonality in temperature. These results indicate that the distribution of palms seems to be strongly associated with climatic variables, supporting the idea that, by 'putting all the eggs in one basket' (a consequence of survival depending on the preservation of a single irreplaceable bud), palms have become vulnerable to extreme environmental conditions. Hence, their distribution is concentrated in those tropical and sub-tropical regions with constant conditions of (mild to high) temperature and moisture all year round.

Cardiovascular Research Publications from Latin America between 1999 and 2008. A Bibliometric Study

Background:Cardiovascular research publications seem to be increasing in Latin America overall.Objective:To analyze trends in cardiovascular publications and their citations from countries in Latin America between 1999 and 2008, and to compare them with those from the rest of the countries.Methods:We retrieved references of cardiovascular publications between 1999 and 2008 and their five-year post-publication citations from the Web of Knowledge database. For countries in Latin America, we calculated the total number of publications and their citation indices (total citations divided by number of publications) by year. We analyzed trends on publications and citation indices over time using Poisson regression models. The analysis was repeated for Latin America as a region, and compared with that for the rest of the countries grouped according to economic development.Results:Brazil (n = 6,132) had the highest number of publications in1999-2008, followed by Argentina (n = 1,686), Mexico (n = 1,368) and Chile (n = 874). Most countries showed an increase in publications over time, leaded by Guatemala (36.5% annually [95%CI: 16.7%-59.7%]), Colombia (22.1% [16.3%-28.2%]), Costa Rica (18.1% [8.1%-28.9%]) and Brazil (17.9% [16.9%-19.1%]). However, trends on citation indices varied widely (from -33.8% to 28.4%). From 1999 to 2008, cardiovascular publications of Latin America increased by 12.9% (12.1%-13.5%) annually. However, the citation indices of Latin America increased 1.5% (1.3%-1.7%) annually, a lower increase than those of all other country groups analyzed.Conclusions:Although the number of cardiovascular publications of Latin America increased from 1999 to 2008, trends on citation indices suggest they may have had a relatively low impact on the research field, stressing the importance of considering quality and dissemination on local research policies.

Localização do adubo em relação à semente (I)

The authors discuss in the introduction the literature about the distribution and placemement of fertilizers in agricultural experiments in U.S.A. in such crops as cotton, corn, potato, beans and some vegetables. An experiment was carried out with corn in a randomized block with 7 treatments, and 4 repetitions. The plots were 11,2m wide by 10m long. The 7 treatments were the following: one broadcast, 3 applications of fertilizer in hills and 3 in rows. In the latter six treatments application in rows or hills was combined with applications in three different depths: below the seeds without mixing the soil, below the seeds but with mixing of the soil, and above the seeds without mixing the soil. The variation between treatments was significant, and the best treatment was the application of fertilizer in hill, below the seeds and with mixing of the soil. The most unfavorable was application in rows above the seed without mixing of the soil. The second best treatment was the application by broadcasting the fertilizer, with mixing the fertilizer and soil by hoeing. New experiments will be carried out, applying the fertilizer in two rows, parallel on each side to the seed row, at three depths: above, below and level with seeds planted. In their discussion the authors stress the need for more experimentation on the methods of applying fertilizers not only to corn plants, but with respect to all main crops and diferent types of soils.

Absorção de zinco pela cana de açúcar, Co 419, em função da idade

The status of zinc in sugar cane, variety Co 419, troughout its life cyle, was studid in samples cut monthly, from the 6th to 15th month, from an experiment carried on under the conditions of soil and climate prevailing in Piracicaba, State of São Paulo, Brazil. The experiment consisted of 6plots, 3 fertilized and 3 unfertilized. The fertilized ones received 40 kg of N (ammonium sulfate), 100 kg P2O5 (superphosphate) and 40 kg K2O (potassium cloride) per hectare, just before planting. The zinc content was determined by the Zincon method, after separation of zinc from other ions by means of the ion Exchange Resin III, Merck. The results obtained show that there was a tendency to decrease the zinc level in the stalks, whereas it kept more or less constant in the leaves; there was an exception in January, when the zinc level in the stalks had a sharp raise: 38-90-20 and 28-60-23 ppm for the fertilized an unfertilized treatments. There was a parallelism in the absorption of zinc by the plants from 4 hills of both treatments, through the whole - plantcycle but, the total amount taken up was higher with the fertilized plot due to its greater mass production.

Analyse des Verfahrens zur Überprüfung der Scheinwerferuntersuchungen bei Hauptuntersuchungen

In meiner Tätigkeit bei der TÜV Nord Mobilität beschäftige ich mich mit der "Analyse des Verfahrens zur Überprüfung der Scheinwerfereinstellung bei Hauptuntersuchungen". Anlass dieser Bachelorarbeit sind unter anderem die hohe Quote an falsch eingestellten Scheinwerfern. Der Hauptgrund hierfür ist, dass die Scheinwerfereinstellung nicht die Aufmerksamkeit bekommt die sie verdient. Zielsetzung dieser Arbeit ist es, das Prüfverfahren der Scheinwerfersysteme zu analysieren, Störgrößen zu ermitteln und gegebenfalls Verbesserungsvorschläge darzulegen. Im ersten Kapitel wird eine Einleitung in die Thematik vorgestellt. Daraufhin werden die Gesetzlichkeiten zu Scheinwerferanlagen analysiert und vorgestellt. Im Zweiten Teil werden die verschieden Scheinwerferanlagen vorgestellt und auf deren Besonderheiten eingegangen. Es werden hierbei auch Scheinwerfersysteme vorgestellt, welche in den nächsten Jahren zum Einsatz kommen werden. Anschließend gibt es einen Überblick über die verschieden Leuchtweitenregelungen. Der dritte Abschnitt und zugleich der Hauptteil der Arbeit befasst sich mit dem Erstellen und Auswerten von Statistiken. Hierbei sollen diese Statistiken die Bedeutung der Scheinwerfereinstellung verdeutlichen und darlegen, wie die Kraftfahrzeugführer mit dieser Verantwortung umgehen. Weiterhin wird hier gezeigt, was bei einem Lampentausch in Bezug auf die Scheinwerfereinstellung zu beachten ist. Zum Abschluss dieses Kapitels wird ein Konzept zur Verbesserung der automatischen Leuchtweitenregulierung vorgestellt. Das letzte Kapitel gibt eine Zusammenfassung der gewonnenen Erkenntnisse in dieser Arbeit.

Indian sites and chipped stone materials in the northern Lake Michigan area / Lewis R. Binford and George I. Quimby.

v.36:no.12(1963)

The Agaricaceae of Michigan, by C. H. Kauffman.

1