UK consensus project on quality in palliative day services: developing a quality indicator set using the RAND/UCLA appropriateness method

Introduction
Evaluating quality of palliative day services is essential for assessing care across diverse settings, and for monitoring quality improvement approaches.

Aim
To develop a set of quality indicators for assessment of all aspects (structure, process and outcome) of care in palliative day services.

Methods
Using a modified version of the RAND/UCLA appropriateness method (Fitch et al., 2001), a multidisciplinary panel of 16 experts independently completed a survey rating the appropriateness of 182 potential quality indicators previously identified during a systematic evidence review. Panel members then attended a one day, face-to-face meeting where indicators were discussed and subsequently re-rated. Panel members were also asked to rate the feasibility and necessity of measuring each indicator.

Results
71 indicators classified as inappropriate during the survey were removed based on median appropriateness ratings and level of agreement. Following the panel discussions, a further 60 were removed based on appropriateness and feasibility ratings, level of agreement and assessment of necessity. Themes identified during the panel discussion and findings of the evidence review were used to translate the remaining 51 indicators into a final set of 27.

Conclusion
The final indicator set included information on rationale and supporting evidence, methods of assessment, risk adjustment, and recommended performance levels. Further implementation work will test the suitability of this ‘toolkit’ for measurement and benchmarking. The final indicator set provides the basis for standardised assessment of quality across services, including care delivered in community and primary care settings.

Reference

• Fitch K, Bernstein SJ, Aguilar MD, et al. The RAND/UCLA Appropriateness Method User’s Manual. Santa Monica, CA: RAND Corporation; 2001. http://www.rand.org/pubs/monograph_reports/MR1269

An Assessment of Psychological Need in Emergency Medical Staff in the Northern Health and Social Care Trust Area

Setting: Psychological stress is increasingly recognised within emergency medicine, given the environmental and clinical stressors associated with the specialism. The current study assessed whether psychological distress is experienced by emergency medical staff and if so, what is the expressed need within this population? Participants: Participants included ambulance personnel, nursing staff, doctors and ancillary support staff within two Accident and Emergency (A&E) departments and twelve ambulance bases within one Trust locality in NI (N = 107). Primary and secondary outcome measures: The General Health Questionnaire (GHQ-12, Goldberg, 1972, 1978), Secondary Traumatic Stress Scale (STSS, Bride, 2004) and an assessment of need questionnaire were completed and explored using mixed method analysis. Results: Results showed elevated levels of psychological distress within each profession except ambulance service clinical support officers (CSOs). Elevated levels of secondary trauma symptomatology were also found; the highest were within some nursing grades and junior doctors. Decreased enjoyment in job over time was significantly associated with higher scores. Analysis of qualitative data identified sources of stress to include low morale. A total of 65% of participants thought that work related stressors had negatively affected their mental health. Participants explored what they felt could decrease psychological distress including improved resources and psychoeducation. Conclusion: There were elevated levels of distress and secondary traumatic stress within this population as well as an expressed level of need, on both systemic and support levels.

An Assessment of How Nurse Practitioners Create Access to Primary Care in Canadian Residential Long-Term Care Settings

The aim of this paper is to explore the role and activities of nurse practitioners (NPs) working in long-term care (LTC) to understand concepts of access to primary care for residents. Utilizing the "FIT" framework developed by Penchanksy and Thomas, we used a directed content analysis method to analyze data from a pan-Canadian study of NPs in LTC. Individual and focus group interviews were conducted at four sites in western, central and eastern regions of Canada with 143 participants, including NPs, RNs, regulated and unregulated nursing staff, allied health professionals, physicians, administrators and directors and residents and family members. Participants emphasized how the availability and accessibility of the NP had an impact on access to primary and urgent care for residents. Understanding more about how NPs affect access in Canadian LTC will be valuable for nursing practice and healthcare planning and policy and may assist other countries in planning for the introduction of NPs in LTC settings to increase access to primary care.

National Diet and Nutrition Survey: assessment of dietary sodium in adults (19 to 64 years) in England, 2014

There is an established relationship between salt intake and risk of high blood pressure (BP). High blood pressure (hypertension) is a risk factor for cardiovascular disease (CVD) and scientific evidence shows that a high salt intake can contribute to the development of elevated blood pressure. The Scientific Advisory Committee on Nutrition (SACN) recommend a target reduction in the average salt intake of the population to no more than 6g per day. This figure has been adopted by the UK government as the recommended maximum salt intake for adults and children aged 11 years and over. Following publication of the SACN report in 2003, the government began a programme of reformulation work with the food industry aimed at reducing the salt content of processed food products. Voluntary salt reduction targets were first set in 2006, and subsequently in 2009, 2011 and 2014, for a range of food categories that contribute the most to the population’s salt intakes. Population representative urinary sodium data were collected in England in 2005-06, 2008 (UK), 2011 and 2014. In the latest survey assessment, estimated salt intake of adults aged 19 to 64 years in England was assessed from 24-hour urinary sodium excretion of 689 adults, selected to be representative of this section of the population. Estimated salt intake was calculated using the equation 17.1mmol of sodium = 1g of salt and assumes all sodium was derived from salt. The data were validated as representing daily intake by checking completeness of the urine collections by the para-amino benzoic acid (PABA) method. Urine samples were collected over five months (May to September) in 2014, concurrently with a similar survey in Scotland. This report presents the results for the latest survey assessment (2014) and a new analysis of the trend in estimated salt intake over time. The trend analysis is based on data for urinary sodium excretion from this survey and previous sodium surveys (including data from the National Diet and Nutrition Survey Rolling Programme (NDNS RP) Years 1 to 5) carried out in England over the last ten years, between 2005-06 and 2014. This data has been adjusted to take account of biases resulting from differences between surveys in laboratory analytical methods used for sodium. The analysis provides a revised assessment of the trend in estimated salt intake over time. The trend analysis in this report supersedes the trend analysis published in the report of the 2011 England urinary sodium survey.

Colorimetric Assessment of BCR-ABL1 Transcripts in Clinical Samples Via Gold Nanoprobes

Gold nanoparticles functionalized with thiolated oligonucleotides (Au-nanoprobes) have been used in a range of applications for the detection of bioanalytes of interest, from ions to proteins and DNA targets. These detection strategies are based on the unique optical properties of gold nanoparticles, in particular, the intense color that is subject to modulation by modification of the medium dieletric. Au-nanoprobes have been applied for the detection and characterization of specific DNA sequences of interest, namely pathogens and disease biomarkers. Nevertheless, despite its relevance, only a few reports exist on the detection of RNA targets. Among these strategies, the colorimetric detection of DNA has been proven to work for several different targets in controlled samples but demonstration in real clinical bioanalysis has been elusive. Here, we used a colorimetric method based on Au-nanoprobes for the direct detection of the e14a2 BCR-ABL fusion transcript in myeloid leukemia patient samples without the need for retro-transcription. Au-nanoprobes directly assessed total RNA from 38 clinical samples, and results were validated against reverse transcription-nested polymerase chain reaction (RT-nested PCR) and reverse transcription-quantitative polymerase chain reaction (RT-qPCR). The colorimetric Au-nanoprobe assay is a simple yet reliable strategy to scrutinize myeloid leukemia patients at diagnosis and evaluate progression, with obvious advantages in terms of time and cost, particularly in low- to medium-income countries where molecular screening is not routinely feasible. Graphical abstract Gold nanoprobe for colorimetric detection of BCR-ABL1 fusion transcripts originating from the Philadelphia chromosome.

Fetal Movements in late Pregnancy : Categorization, Self-assessment, and Prenatal Attachment in relation to women’s experiences

Aim: To explore how pregnant women experience fetal movements in late pregnancy. Specific aims were:  to study women’s experiences during the time prior to receiving news that their unborn baby had died in utero (I), to investigate women’s descriptions of fetal movements (II), investigate the association between the magnitude of fetal movements and level of prenatal attachment (III), and to study women’s experiences using two different self-assessment methods (IV). Methods: Interviews, questionnaires, and observations were used. Results: Premonition that something had happened to their unborn baby, based on a lack of fetal movements, was experienced by the participants. The overall theme “something is wrong” describes the women’s insight that the baby’s life was threatened (I). Fetal movements that were sorted into the domain “powerful movements” were perceived in late pregnancy by 96 % of the participants (II). Perceiving frequent fetal movements on at least three occasions per 24 hours was associated with higher scores of prenatal attachment in all the three subscales on PAI-R. The majority (55%) of the 456 participants reported average occasions of frequent fetal movements, 26% several occasions and 18% reported few occasions of frequent fetal movements, during the current gestational week.  (III). Only one of the 40 participants did not find at least one method for monitoring fetal movements suitable. Fifteen of the 39 participants reported a preference for the mindfetalness method and five for the count-to-ten method. The women described the observation of the movements as a safe and reassuring moment for communication with their unborn baby (IV). Conclusion:  In full-term and uncomplicated pregnancies, women usually perceive fetal movements as powerful. Furthermore, women in late pregnancy who reported frequent fetal movements on several occasions during a 24-hour period seem to have a high level of prenatal attachment. Women who used self-assessment methods for monitoring fetal movements felt calm and relaxed when observing the movements of their babies. They had a high compliance for both self-assessment methods. Women that had experienced a stillbirth in late pregnancy described that they had a premonition before they were told that their baby had died in utero. 

Investigating the effects of caffeine on executive functions using traditional Stroop and a new ecologically-valid virtual reality task, the Jansari assessment of Executive Functions (JEF©)

Objective: Caffeine has been shown to have effects on certain areas of cognition, but in executive functioning the research is limited and also inconsistent. One reason could be the need for a more sensitive measure to detect the effects of caffeine on executive function. This study used a new non-immersive virtual reality assessment of executive functions known as JEF© (the Jansari Assessment of Executive Function) alongside the ‘classic’ Stroop Colour- Word task to assess the effects of a normal dose of caffeinated coffee on executive function. Method: Using a double-blind, counterbalanced within participants procedure 43 participants were administered either a caffeinated or decaffeinated coffee and completed the ‘JEF©’ and Stroop tasks, as well as a subjective mood scale and blood pressure pre- and post condition on two separate occasions a week apart. JEF© yields measures for eight separate aspects of executive functions, in addition to a total average score. Results: Findings indicate that performance was significantly improved on the planning, creative thinking, event-, time- and action-based prospective memory, as well as total JEF© score following caffeinated coffee relative to the decaffeinated coffee. The caffeinated beverage significantly decreased reaction times on the Stroop task, but there was no effect on Stroop interference. Conclusion: The results provide further support for the effects of a caffeinated beverage on cognitive functioning. In particular, it has demonstrated the ability of JEF© to detect the effects of caffeine across a number of executive functioning constructs, which weren’t shown in the Stroop task, suggesting executive functioning improvements as a result of a ‘typical’ dose of caffeine may only be detected by the use of more real-world, ecologically valid tasks.

Updating of Finite Element Models using static and dynamic optical strains with application to damage assessment

In the recent years, vibration-based structural damage identification has been subject of significant research in structural engineering. The basic idea of vibration-based methods is that damage induces mechanical properties changes that cause anomalies in the dynamic response of the structure, which measures allow to localize damage and its extension. Vibration measured data, such as frequencies and mode shapes, can be used in the Finite Element Model Updating in order to adjust structural parameters sensible at damage (e.g. Young’s Modulus). The novel aspect of this thesis is the introduction into the objective function of accurate measures of strains mode shapes, evaluated through FBG sensors. After a review of the relevant literature, the case of study, i.e. an irregular prestressed concrete beam destined for roofing of industrial structures, will be presented. The mathematical model was built through FE models, studying static and dynamic behaviour of the element. Another analytical model was developed, based on the ‘Ritz method’, in order to investigate the possible interaction between the RC beam and the steel supporting table used for testing. Experimental data, recorded through the contemporary use of different measurement techniques (optical fibers, accelerometers, LVDTs) were compared whit theoretical data, allowing to detect the best model, for which have been outlined the settings for the updating procedure.

The Use of Multi-Criteria Decision Analysis in Performing Alternatives Assessment and Comparative Risk Analysis: The Case Study of Codling Moth Pesticides

Thesis (Ph.D.)--University of Washington, 2016-08

Credible or not : A study on the factors influencing consumers' credibility assessment of product placements on Instagram

Background: To align with the new trend of using social media in the marketing mix, product placement has been adapted to social media platforms as one strategy to create attention. Especially on Instagram, product placements have gained popularity among companies. While scholars have focused on measuring the effectiveness of the strategy, suggesting that credibility is one component necessary for success, a gap in the research is illuminated when focusing on what makes a product placement on Instagram credible. Previous studies regarding credibility and its relation to traditional media have concluded that there are some factors essential in consumers’ credibility evaluation process. Since social media differs from traditional media, there was a need to investigate the applicability of credibility to the social media platform Instagram. Purpose: The purpose of this thesis was to examine key factors of product placement on Instagram that influence credibility. Method: To meet the purpose of this thesis a study with a mixed method research design was conducted. The qualitative data was collected through semi-structured interviews with the intention to discover how consumers evaluate credibility. The scales and items developed from the findings of the qualitative study were tested using a questionnaire to identify which factors that have the most influence on consumers’ credibility assessment. Conclusions: The overall findings indicate that consumers evaluate credibility based upon source, message and receiver characteristics. The empirical evidence suggests that the Expertise of influencer, Professionalism of picture, Trustworthiness of influencer, Connection to influencer and Causes of irritation are the factors that have the most influence on consumers’ credibility assessment of product placement on Instagram. The findings further implies that it is not only the factor itself that influence, credibility can additionally be transferred from one factor to another.

Microbiota assessment in optical shops: an ignored concern to public health

The presence of microorganisms in ophthalmic instruments and surfaces can lead to the exposure of patients to several infections. However, there is no information regarding fungal and bacteria contamination in optical shops. This study aims to characterize fungi and bacteria contamination in air and surfaces from 10 optical shops covering also ophthalmic instruments. Air samples were collected through an impaction method onto malt extract agar (MEA) supplemented with chloramphenicol (0.05%) used for fungi and Tryptic Soy Agar (TSA) supplemented with nystatin (0.2%) used for bacteria. Outdoor samples were also performed to be used as reference. Surface and equipment’s swab samples were also collected side-by-side. All the collected samples were incubated at 27ºC for 5 to 7 days (fungi) or at 30º for 7 days (bacteria). Regarding fungal distribution, thirteen different species/genera were found in the air, being the most common Alternaria sp. (62.0%). Eight different species/genera were identified in the surfaces, ranging from 2 to 5x104 CFU/m2, being the most common A. versicolor complex and Penicillium sp. (40.0%). The trial frames were the most contaminated equipment, since 50.0% of the collected samples were with countless colonies. The airborne bacterial population indicated higher concentrations in the contactology office (average: 133 CFU/m3) than in the client’s waiting rooms (average: 126 CFU/m3). The surface samples indicated bacterial concentrations ranging from 2x104 to 1x106 CFU/m2, pointing out the automatic refractometer as the surface with higher bacterial load.

Is quality of life measurement likely to be a proxy for health needs assessment in patients with coronary artery disease?

BACKGROUND: The identification of patients' health needs is pivotal in optimising the quality of health care, increasing patient satisfaction and directing resource allocation. Health needs are complex and not so easily evaluated as health-related quality of life (HRQL), which is becoming increasingly accepted as a means of providing a more global, patient-orientated assessment of the outcome of health care interventions than the simple medical model. The potential of HRQL as a surrogate measure of healthcare needs has not been evaluated. OBJECTIVES AND METHOD: A generic (Short Form-12; SF-12) and a disease-specific questionnaire (Seattle Angina Questionnaire; SAQ) were tested for their potential to predict health needs in patients with acute coronary disease. A wide range of healthcare needs were determined using a questionnaire specifically developed for this purpose. RESULTS: With the exception of information needs, healthcare needs were highly correlated with health-related quality of life. Patients with limited enjoyment of personal interests, weak financial situation, greater dependency on others to access health services, and dissatisfaction with accommodation reported poorer HRQL (SF-12: p < 0.001; SAQ: p < 0.01). Difficulties with mobility, aids to daily living and activities requiring assistance from someone else were strongly associated with both generic and disease-specific questionnaires (SF-12: r = 0.46-0.55, p < 0.01; SAQ: r = 0.53-0.65, p < 0.001). Variables relating to quality of care and health services were more highly correlated with SAQ components (r = 0.33-0.59) than with SF-12 (r = 0.07-0.33). Overall, the disease-specific Seattle Angina Questionnaire was superior to the generic Short Form-12 in detecting healthcare needs in patients with coronary disease. Receiver-operator curves supported the sensitivity of HRQL tools in detecting health needs. CONCLUSION: Healthcare needs are complex and developing suitable questionnaires to measure these is difficult and time-consuming. Without a satisfactory means of measuring these needs, the extent to which disease impacts on health will continue to be underestimated. Further investigation on larger populations is warranted but HRQL tools appear to be a reasonable proxy for healthcare needs, as they identify the majority of needs in patients with coronary disease, an observation not previously reported in this patient group

Assessment of exposure to the Penicillium glabrum complex in cork industry using complementing methods

Cork oak is the second most dominant forest species in Portugal and makes this country the world leader in cork export. Occupational exposure to Chrysonilia sitophila and the Penicillium glabrum complex in cork industry is common, and the latter fungus is associated with suberosis. However, as conventional methods seem to underestimate its presence in occupational environments, the aim of our study was to see whether information obtained by polymerase chain reaction (PCR), a molecular-based method, can complement conventional findings and give a better insight into occupational exposure of cork industry workers. We assessed fungal contamination with the P. glabrum complex in three cork manufacturing plants in the outskirts of Lisbon using both conventional and molecular methods. Conventional culturing failed to detect the fungus at six sampling sites in which PCR did detect it. This confirms our assumption that the use of complementing methods can provide information for a more accurate assessment of occupational exposure to the P. glabrum complex in cork industry.

AN ENTROPIC THEORY OF DAMAGE WITH APPLICATIONS TO CORROSION-FATIGUE STRUCTURAL INTEGRITY ASSESSMENT

This dissertation demonstrates an explanation of damage and reliability of critical components and structures within the second law of thermodynamics. The approach relies on the fundamentals of irreversible thermodynamics, specifically the concept of entropy generation due to materials degradation as an index of damage. All failure mechanisms that cause degradation, damage accumulation and ultimate failure share a common feature, namely energy dissipation. Energy dissipation, as a fundamental measure for irreversibility in a thermodynamic treatment of non-equilibrium processes, leads to and can be expressed in terms of entropy generation. The dissertation proposes a theory of damage by relating entropy generation to energy dissipation via generalized thermodynamic forces and thermodynamic fluxes that formally describes the resulting damage. Following the proposed theory of entropic damage, an approach to reliability and integrity characterization based on thermodynamic entropy is discussed. It is shown that the variability in the amount of the thermodynamic-based damage and uncertainties about the parameters of a distribution model describing the variability, leads to a more consistent and broader definition of the well know time-to-failure distribution in reliability engineering. As such it has been shown that the reliability function can be derived from the thermodynamic laws rather than estimated from the observed failure histories. Furthermore, using the superior advantages of the use of entropy generation and accumulation as a damage index in comparison to common observable markers of damage such as crack size, a method is proposed to explain the prognostics and health management (PHM) in terms of the entropic damage. The proposed entropic-based damage theory to reliability and integrity is then demonstrated through experimental validation. Using this theorem, the corrosion-fatigue entropy generation function is derived, evaluated and employed for structural integrity, reliability assessment and remaining useful life (RUL) prediction of Aluminum 7075-T651 specimens tested.

Assessment of the quality of sample labelling for clinical research

Objective: To assess the quality of the labels for clinical trial samples through current regulations, and to analyze its potential correlation with the specific characteristics of each sample. Method: A transversal multicenter study where the clinical trial samples from two third level hospitals were analyzed. The eleven items from Directive 2003/94/EC, as well as the name of the clinical trial and the dose on the label cover, were considered variables for labelling quality. The influence of the characteristics of each sample on labelling quality was also analyzed. Outcome: The study included 503 samples from 220 clinical trials. The mean quality of labelling, understood as the proportion of items from Appendix 13, was of 91.9%. Out of these, 6.6% did not include the name of the sample in the outer face of the label, while in 9.7% the dose was missing. The samples with clinical trial-type samples presented a higher quality (p < 0.049), blinding reduced their quality (p = 0.017), and identification by kit number or by patient increased it (p < 0.01). The promoter was the variable which introduced the highest variability into the analysis. Conclusions: The mean quality of labelling is adequate in the majority of clinical trial samples. The lack of essential information in some samples, such as the clinical trial code and the period of validity, is alarming and might be the potential source for dispensing or administration errors.