An Alternative Approach To Computer System Security Monitoring And Enhancement Through System Call Sequence Analysis

Modern computer systems are plagued with stability and security problems: applications lose data, web servers are hacked, and systems crash under heavy load. Many of these problems or anomalies arise from rare program behavior caused by attacks or errors. A substantial percentage of the web-based attacks are due to buffer overflows. Many methods have been devised to detect and prevent anomalous situations that arise from buffer overflows. The current state-of-art of anomaly detection systems is relatively primitive and mainly depend on static code checking to take care of buffer overflow attacks. For protection, Stack Guards and I-leap Guards are also used in wide varieties.This dissertation proposes an anomaly detection system, based on frequencies of system calls in the system call trace. System call traces represented as frequency sequences are profiled using sequence sets. A sequence set is identified by the starting sequence and frequencies of specific system calls. The deviations of the current input sequence from the corresponding normal profile in the frequency pattern of system calls is computed and expressed as an anomaly score. A simple Bayesian model is used for an accurate detection.Experimental results are reported which show that frequency of system calls represented using sequence sets, captures the normal behavior of programs under normal conditions of usage. This captured behavior allows the system to detect anomalies with a low rate of false positives. Data are presented which show that Bayesian Network on frequency variations responds effectively to induced buffer overflows. It can also help administrators to detect deviations in program flow introduced due to errors.

Computer vision techniques in seafood quality control

The application of computer vision based quality control has been slowly but steadily gaining importance mainly due to its speed in achieving results and also greatly due to its non- destnictive nature of testing. Besides, in food applications it also does not contribute to contamination. However, computer vision applications in quality control needs the application of an appropriate software for image analysis. Eventhough computer vision based quality control has several advantages, its application has limitations as to the type of work to be done, particularly so in the food industries. Selective applications, however, can be highly advantageous and very accurate.Computer vision based image analysis could be used in morphometric measurements of fish with the same accuracy as the existing conventional method. The method is non-destructive and non-contaminating thus providing anadvantage in seafood processing.The images could be stored in archives and retrieved at anytime to carry out morphometric studies for biologists.Computer vision and subsequent image analysis could be used in measurements of various food products to assess uniformity of size. One product namely cutlet and product ingredients namely coating materials such as bread crumbs and rava were selected for the study. Computer vision based image analysis was used in the measurements of length, width and area of cutlets. Also the width of coating materials like bread crumbs was measured.Computer imaging and subsequent image analysis can be very effectively used in quality evaluations of product ingredients in food processing. Measurement of width of coating materials could establish uniformity of particles or the lack of it. The application of image analysis in bacteriological work was also done

Diffusive transport properties in monovalent and divalent metal-ion halide melts: A computer simulation study

Self- and cross-velocity correlation functions and related transport coefficients of molten salts are studied by molecular-dynamics simulation. Six representative systems are considered, i.e., NaCl and KCl alkali halides, CuCl and CuBr noble-metal halides, and SrCl2 and ZnCl2 divalent metal-ion halides. Computer simulation results are compared with experimental self-diffusion coefficients and electrical conductivities. Special attention is paid to dynamic cross correlations and their dependence on the Coulomb interactions as well as on the size and mass differences between anions and cations.

Management of Traffic Control — A Computer Oriented Approach

Traffic Management system (TMS) comprises four major sub systems: The Network Database Management system for information to the passengers, Transit Facility Management System for service, planning, and scheduling vehicle and crews, Congestion Management System for traffic forecasting and planning, Safety Management System concerned with safety aspects of passengers and Environment. This work has opened a rather wide frame work of model structures for application on traffic. The facets of these theories are so wide that it seems impossible to present all necessary models in this work. However it could be deduced from the study that the best Traffic Management System is that whichis realistic in all aspects is easy to understand is easy to apply As it is practically difficult to device an ideal fool—proof model, the attempt here has been to make some progress-in that direction.

Video Object Tracking And Analysis For Computer Assisted Surgery

Pedicle screw insertion technique has made revolution in the surgical treatment of spinal fractures and spinal disorders. Although X- ray fluoroscopy based navigation is popular, there is risk of prolonged exposure to X- ray radiation. Systems that have lower radiation risk are generally quite expensive. The position and orientation of the drill is clinically very important in pedicle screw fixation. In this paper, the position and orientation of the marker on the drill is determined using pattern recognition based methods, using geometric features, obtained from the input video sequence taken from CCD camera. A search is then performed on the video frames after preprocessing, to obtain the exact position and orientation of the drill. An animated graphics, showing the instantaneous position and orientation of the drill is then overlaid on the processed video for real time drill control and navigation

Evaluation Of A Novel Method Of Real Time Computer Assisted Spine Surgery

In this paper the effectiveness of a novel method of computer assisted pedicle screw insertion was studied using testing of hypothesis procedure with a sample size of 48. Pattern recognition based on geometric features of markers on the drill has been performed on real time optical video obtained from orthogonally placed CCD cameras. The study reveals the exactness of the calculated position of the drill using navigation based on CT image of the vertebra and real time optical video of the drill. The significance value is 0.424 at 95% confidence level which indicates good precision with a standard mean error of only 0.00724. The virtual vision method is less hazardous to both patient and the surgeon

Some Aspects of Domain Specific Conceptual Modeling for Simulation of Logistic Terminal Operations

When simulation modeling is used for performance improvement studies of complex systems such as transport terminals, domain specific conceptual modeling constructs could be used by modelers to create structured models. A two stage procedure which includes identification of the problem characteristics/cluster - ‘knowledge acquisition’ and identification of standard models for the problem cluster – ‘model abstraction’ was found to be effective in creating structured models when applied to certain logistic terminal systems. In this paper we discuss some methods and examples related the knowledge acquisition and model abstraction stages for the development of three different types of model categories of terminal systems

Computer Integrated Business: Theoretische und empirische Analyse der bisherigen Ansätze und zukünftigen Perspektiven

Die Arbeit stellt einen strukturellen Rahmen zur Einordnung sowohl bisheriger als auch zukünftiger organisationstheoretischer und DV-technologischer Entwicklungen zur Umsetzung eines Computer Integrated Business (CIB) bereit. Dazu analysiert sie bisherige Ansätze und zukünftige Perspektiven eines CIB mittels theoretischer und empirischer Bearbeitungsverfahren. Die Notwendigkeit zur Unternehmensintegration ergibt sich aus dem betriebswirtschaftlichen Konzept der Arbeitsteilung, über die das Phänomen der Economies of Scale erschlossen wird. Die Arbeitsteilung wurde zum Gestaltungskonzept in den Fabriken der industriellen Revolution. Komplexe Arbeitsgänge wurden in spezialisierte Teilaufgaben zerlegt und nach Möglichkeit auf maschinelle bzw. technologische Potentiale übertragen. Die Zielsetzung lag zunächst in der Automatisierung des Materialflusses, während der Informationsfluss noch lange Zeit im Hintergrund stand. Mittlerweile ermöglichen leistungsfähige DV-Systeme auch die Automatisierung des Informationsflusses und damit die DV-gestützte Integration des Unternehmens, die den Kern des CIB-Konzeptes darstellt. Das CIB-Konzept wurde Ende der achtziger Jahre am Fraunhofer-Institut für Arbeitswirtschaft und Organisation als Erweiterung des Computer Integrated Manufacturing (CIM) für Industrieunternehmen von Bullinger geprägt, jedoch in seiner Zielsetzung als Modell zur Totalintegration von Unternehmen danach nicht maßgeblich weiterentwickelt. Vielmehr wurden in der Folgezeit überwiegend Teilintegrationslösungen diskutiert, wie z. B. Konzepte zur Integration der Fertigung oder zur Unterstützung der Teamarbeit. Der Aspekt der umfassenden, unternehmensinternen Integration rückte Mitte der neunziger Jahre durch die an Popularität gewinnende Internet-Technologie an den Rand der wissenschaftlichen Diskussion. Erst nach dem Zusammenbruch der ersten Internet-Euphorie und der anschließenden wirtschaftlichen Rezession gewann das Integrationsthema am Anfang dieses Jahrzehnts mit Hinblick auf dadurch mögliche Kostenvorteile wieder an Bedeutung. Die Diskussion wurde jedoch mit starkem technologischem Fokus geführt (z. B. zum Thema Enterprise Application Integration) und Aspekte der Unternehmensorganisation wurden bestenfalls grob, jedoch nicht im Detail diskutiert. Die vorliegende Arbeit bearbeitet die CIB-Thematik umfassend sowohl aus unternehmensorganisatorischer als auch DV-technologischer Sicht und bewegt sich deshalb interdisziplinär zwischen den Wissenschaftsbereichen der Betriebswirtschaft und der Informatik. Die Untersuchung wird vor dem Hintergrund einer sozio-technologischen Unternehmensorganisation geführt, in der DV-technologische Potentiale neben humanen Potentialen zur Erreichung der Unternehmensziele eingesetzt werden. DV-technologische Potentiale übernehmen darin einerseits Integrationsaufgaben und werden andererseits aber selbst zum Integrationsziel. Die Herausforderung für die Unternehmensführung besteht in der Konfiguration des CIB und im Finden eines Gleichgewichts zwischen Arbeitsteilung und Integration auf der einen sowie humanen und technologischen Potentialen auf der anderen Seite, letztendlich aber auch in der Automatisierung der Integration. Die Automatisierung der Integration stellt mit Hinblick auf die durch Umweltveränderungen bedingte Konfigurationsanpassung ein bisher konzeptionell nur ansatzweise gelöstes Problem dar. Der technologischen Integrationsarchitektur sowie den verwendeten Methoden des Prozessdesigns und der Software-Entwicklung kommt bei der Lösung dieses Problems eine hohe Bedeutung zu. Über sie bestimmt sich die Anpassungsfähigkeit und geschwindigkeit des CIB. Es kann vermutet werden, dass eine Lösung jedoch erst erreicht wird, wenn sich die Unternehmensorganisation vom Konzept der zentralen Koordination abwendet und stattdessen an dezentralen Koordinationsmechanismen unter Verwendung ultrastabiler Anpassungsprogramme orientiert, wie sie z. B. in der Biologie bei Insektenkulturen untersucht wurden.

A computer-algebraic approach to the study of the symmetry properties of molecules and clusters

This thesis work is dedicated to use the computer-algebraic approach for dealing with the group symmetries and studying the symmetry properties of molecules and clusters. The Maple package Bethe, created to extract and manipulate the group-theoretical data and to simplify some of the symmetry applications, is introduced. First of all the advantages of using Bethe to generate the group theoretical data are demonstrated. In the current version, the data of 72 frequently applied point groups can be used, together with the data for all of the corresponding double groups. The emphasize of this work is placed to the applications of this package in physics of molecules and clusters. Apart from the analysis of the spectral activity of molecules with point-group symmetry, it is demonstrated how Bethe can be used to understand the field splitting in crystals or to construct the corresponding wave functions. Several examples are worked out to display (some of) the present features of the Bethe program. While we cannot show all the details explicitly, these examples certainly demonstrate the great potential in applying computer algebraic techniques to study the symmetry properties of molecules and clusters. A special attention is placed in this thesis work on the flexibility of the Bethe package, which makes it possible to implement another applications of symmetry. This implementation is very reasonable, because some of the most complicated steps of the possible future applications are already realized within the Bethe. For instance, the vibrational coordinates in terms of the internal displacement vectors for the Wilson's method and the same coordinates in terms of cartesian displacement vectors as well as the Clebsch-Gordan coefficients for the Jahn-Teller problem are generated in the present version of the program. For the Jahn-Teller problem, moreover, use of the computer-algebraic tool seems to be even inevitable, because this problem demands an analytical access to the adiabatic potential and, therefore, can not be realized by the numerical algorithm. However, the ability of the Bethe package is not exhausted by applications, mentioned in this thesis work. There are various directions in which the Bethe program could be developed in the future. Apart from (i) studying of the magnetic properties of materials and (ii) optical transitions, interest can be pointed out for (iii) the vibronic spectroscopy, and many others. Implementation of these applications into the package can make Bethe a much more powerful tool.

An introduction to ordinary differential equations by computer algebra-systems

We report on an elementary course in ordinary differential equations (odes) for students in engineering sciences. The course is also intended to become a self-study package for odes and is is based on several interactive computer lessons using REDUCE and MATHEMATICA . The aim of the course is not to do Computer Algebra (CA) by example or to use it for doing classroom examples. The aim ist to teach and to learn mathematics by using CA-systems.

Why are There so Few Female Computer Scientists?

This report examines why women pursue careers in computer science and related fields far less frequently than men do. In 1990, only 13% of PhDs in computer science went to women, and only 7.8% of computer science professors were female. Causes include the different ways in which boys and girls are raised, the stereotypes of female engineers, subtle biases that females face, problems resulting from working in predominantly male environments, and sexual biases in language. A theme of the report is that women's underrepresentation is not primarily due to direct discrimination but to subconscious behavior that perpetuates the status quo.

Site Controller: A System for Computer-Aided Civil Engineering and Construction

A revolution\0\0\0 in earthmoving, a $100 billion industry, can be achieved with three components: the GPS location system, sensors and computers in bulldozers, and SITE CONTROLLER, a central computer system that maintains design data and directs operations. The first two components are widely available; I built SITE CONTROLLER to complete the triangle and describe it here. SITE CONTROLLER assists civil engineers in the design, estimation, and construction of earthworks, including hazardous waste site remediation. The core of SITE CONTROLLER is a site modelling system that represents existing and prospective terrain shapes, roads, hydrology, etc. Around this core are analysis, simulation, and vehicle control tools. Integrating these modules into one program enables civil engineers and contractors to use a single interface and database throughout the life of a project.

Computer Analysis of Visual Properties of Curved Objects

A method is presented for the visual analysis of objects by computer. It is particularly well suited for opaque objects with smoothly curved surfaces. The method extracts information about the object's surface properties, including measures of its specularity, texture, and regularity. It also aids in determining the object's shape. The application of this method to a simple recognition task ??e recognition of fruit ?? discussed. The results on a more complex smoothly curved object, a human face, are also considered.