Applying quality control in building energy modelling: Comparative simulation of a high performance building

Quality control is considered from the simulator's perspective through comparative simulation of an ultra energy-efficient building with EE4-DOE2.1E and EnergyPlus. The University of Calgary's Leadership in Energy and Environmental Design Platinum Child Development Centre, with a 66% certified energy cost reduction rating, was the case study building. A Natural Resources Canada incentive program required use of EE4 interface with DOE2.1E simulation engine for energy modelling. As DOE2.1E lacks specific features to simulate advanced systems such as radiant cooling in the CDC, an EnergyPlus model was developed to further evaluate these features. The EE4-DOE2.1E model was used for quality control during development of the base EnergyPlus model and simulation results were compared. Advanced energy systems then added to the EnergyPlus model generated small difference in estimated total annual energy use. The comparative simulation process helped identify the main input errors in the draft EnergyPlus model. The comparative use of less complex simulation programs is recommended for quality control when producing more complex models. © 2009 International Building Performance Simulation Association (IBPSA).

Socio-economics of fishing communities on Uganda water bodies

Control and management of Uganda fishery resources has been hindered by among other factors the multispecies nature of the resource and the characteristic behaviour of the fishing communities. Fishermen have both genuine and uncompromising attitudes as to why they carry out certain fishing technologies.All fishing activities aim at maximizing the catches or profits while others may fish on a small scale for subsistence. Sensitizing the fisherfolk on the appropriate fishing technologies, importance of a well regulated fishery exploitation and their participation in control and management of the resource would enhance or lead to increased and sustainable fish production. Socio-economics of fishing technologies were therefore examined using prepared questionnaires and reasons why the fishing communities behave the way they do established

A Comparative Review of Existing Data and Methodologies for Calculating Embodied Energy and Carbon of Buildings

In the Climate Change Act of 2008 the UK Government pledged to reduce carbon emissions by 80% by 2050. As one step towards this, regulations are being introduced requiring all new buildings to be ‘zero carbon’ by 2019. These are defined as buildings which emit net zero carbon during their operational lifetime. However, in order to meet the 80% target it is necessary to reduce the carbon emitted during the whole life-cycle of buildings, including that emitted during the processes of construction. These elements make up the ‘embodied carbon’ of the building. While there are no regulations yet in place to restrict embodied carbon, a number of different approaches have been made. There are several existing databases of embodied carbon and embodied energy. Most provide data for the material extraction and manufacturing only, the ‘cradle to factory gate’ phase. In addition to the databases, various software tools have been developed to calculate embodied energy and carbon of individual buildings. A third source of data comes from the research literature, in which individual life cycle analyses of buildings are reported. This paper provides a comprehensive review, comparing and assessing data sources, boundaries and methodologies. The paper concludes that the wide variations in these aspects produce incomparable results. It highlights the areas where existing data is reliable, and where new data and more precise methods are needed. This comprehensive review will guide the future development of a consistent and transparent database and software tool to calculate the embodied energy and carbon of buildings.

Comparative electrophoretic patterns of lactase dehydrogenase and malate dehydrogenase in five Lake Victoria cichlid species

Biochemical techniques designed to compare species on the basis of protein differences were started by NUTTALL (1904) who used immunological methods to compare the serum of humans with that of other primates. Since then more refined techniques have led to better results at the protein level in taxonomy, The analyses of proteins are considered to be the simplest indirect approach to understanding the structure and function of the genetic material, deoxyribonucleic acid (DNA). Interest in these analyses arises because of the close relationship between protein structure and gene structure. Thus by comparing the properties of homologous proteins from different taxa one is in essence comparins their genes (GORMAN er al., 1971). It is now an established fact that genetic information coded in molecules of DNA is translated through a series of reactions in the structure of proteins which form the principal morphological units of the animal body at the molecular level of organization (SIBLEY, 1952). A convenient method of comparing molecular differences between species is to measure the electrophoretic mobility of proteins in a starch gel medium (ASPINWALL and TSUYUKI, 1968) or acrylamide gel (RAYMOND and WEINTRAUB, 1959; BOUCK and BALL, 1968). Proteins with enzymatic properties can be compared on the basis of catalytic activity in the presence or absence of inhibitors (KAPLAN et al., 1959); BAILEY et al., t 1970). A combination of gel electrophoresis and histochemical enzyme detection techniques (HUNTER and MARKERT, 1957) makes it possible to combine electrophoretic mobility anti catalytic activity comparison, Enzyme patterns exhibited in starch gel or acrylamide gel have been used to classify different species. BOUCK and BALL (1968)working with lactate dehydrogenase in species of Trout found that each Trout species had LDH pattern characterbtic of that species. ASPINIWALL and TSUYUKI (1968) used muscle protein electrophoretic patterns to identify hybrid fishes. TSUYUKI and ROBERTS (1963) and TSUYUKI et al. (1964-65) found that myogen protein patterns in fishes were species specific. The myogen patterns within one family were remarkably parallel with the existing morphometric classification and these patterns constituted a single criterion by which the fishes could be identified. The fish used in these investigations were collected from shallow waters (10 metres) of Lake Victoria in two areas, Jinja and Kisumu, using gillnets and beach-seines. The study included ten specimens of each of the following specIes: (l) Haplochromis michaeli (2) Haploehromis obems (3) Astatoreochromis ulluaudi (4) Tilapia zillii and (5) Tilapia nilotica.

A conceptualized fishing system for the African environment with a comparative approach

The paper examines a conceptualized fishing system for the African Environment with a comparative approach. Although the fishing system has been conceived as a bio-economic complex, emphasis will be given to the explanation of the detailed structure and functioning of the system. Subsequent synthesis involving the use of existing relationships for management etc. will also be undertaken. The proposed fishing system is conceptually feasible in an ideal environment with adequate monitored data and organized fishing, however it is anticipated that the African environment will not satisfy such conditions.

Comparative switching behaviour of silicon transistors and practical silicon carbide transistors

The motivation for our work is to identify a space for silicon carbide (SiC) devices in the silicon (Si) world. This paper presents a detailed experimental investigation of the switching behaviour of silicon and silicon carbide transistors (a JFET and a cascode device comprising a Si-MOSFET and a SiC-JFET). The experimental method is based on a clamped inductive load chopper circuit that puts considerable stress on the device and increases the transient power dissipation. A precise comparison of switching behaviour of Si and SiC devices on similar terms is the novelty of our work. The cascode is found to be an attractive fast switching device, capable of operating in two different configurations whose switching equivalent circuits are proposed here. The effect of limited dv/dt of the Si-MOSFET on the switching of the SiC-JFET in a cascode is also critically analysed.

A COMPARATIVE-STUDY OF THE ELBOW JOINTS IN 5 SPECIES OF CHINESE MACAQUES

In this paper, we report the findings of a comparative study of the elbow joints of five species of macaque that inhabit China: Macaca assamensis, M. arctoides, M. mulatta, M. thibetana and M. nemestrina. Results of multivariate analyses of size-related variables and indices of the elbow joint suggested that the breadths of the ventral aspect of the trochlea and of the medial epicondyle of the humerus as well as indices describing the head of the radius are important factors for discriminating these species. The elbow joint of M. arctoides was most similar to that of M. thibetana, no doubt reflecting recency of common ancestry and similarity in terrestrial locomotion. The structures of the elbow joints in M. nemestrina and assamensis seemed more adapted to arboreal quadrupedalism. The elbow joint of M. mulatta, however, appears intermediate between the most terrestrial and the most arboreal forms.

Comparative studies on parallel and antiparallel duplex and triplex DNA

Parallel strand models for base sequences d(A)(10). d(T)(10), d(AT)(5) . d(TA)(5), d(G(5)C(5)). d(C(5)G(5)), d(GC)(5) . d(CG)(5) and d(CTATAGGGAT). d(GATATCCCTA), where reverse Watson-Crick A-T pairing with two H-bonds and reverse Watson-Crick G-C pairing with one H-bond or with two H-bonds were adopted, and three models of d(T)(14). d(A)(14). d(T)(14) triple helix with different strand orientations were built up by molecular architecture and energy minimization. Comparisons of parallel duplex models with their corresponding B-DNA models and comparisons among the three triple helices showed: (i) conformational energies of parallel AT duplex models were a little lower, while for GC duplex models they were about 8% higher than that of their corresponding B-DNA models; (ii) the energy differences between parallel and B-type duplex models and among the three triple helices arose mainly from base stacking energies, especially for GC base pairing; (iii) the parallel duplexes with one H-bond G-C pairs were less stable than those with two H-bonds G-C pairs. The present paper includes a brief discussion about the effect of base stacking and base sequences on DNA conformations. (C) 1997 Academic Press Limited.

A novel method for rapid comparative quantitative analysis of nuclear fuel cycles

One of the greatest obstacles facing the nuclear industry is that of sustainability, both in terms of the finite reserves of uranium ore and the production of highly radiotoxic spent fuel which presents proliferation and environmental hazards. Alternative nuclear technologies have been suggested as a means of delivering enhanced sustainability with proposals including fast reactors, the use of thorium fuel and tiered fuel cycles. The debate as to which is the most appropriate technology continues, with each fuel system and reactor type delivering specific advantages and disadvantages which can be difficult to compare fairly. This paper demonstrates a framework of performance metrics which, coupled with a first-order lumped reactor model to determine nuclide population balances, can be used to quantify the aforementioned pros and cons for a range of different fuel and reactor combinations. The framework includes metrics such as fuel efficiency, spent fuel toxicity and proliferation resistance, and relative cycle performance is analysed through parallel coordinate plots, yielding a quantitative comparison of disparate cycles. © 2011 Elsevier Ltd. All rights reserved.

The comparative analysis of the energies of conjugated triple base triplets and their applications

We built 64 sets of 3D models of DNA triplex base triplets (TBT) and minimized their energies. The TBTs were divided into 32 pairs of conjugated ones on the basis of their sequence characteristic, and the energies of each pair of them were compared and analyzed, the results showed: (i) The duplex DNA of which any strand contains at least a couple of A or T, has a preference for selecting the oligodeoxyribonucleic acid (ODN) strand containing abundant T to form TBT. (ii) The duplex DNA of which any strand contains at least a couple of G or C has a preference for selecting ODN containing abundant G to form symmetric antiparallel TBT, but selecting ODN containing abundant C to form asymmetric parallel TBT. (iii) The duplex DNA of which any strand contains only one of A, T, G or C has a preference for selecting ODN containing abundant pyrimidines (T or C) to form antiparallel TBT. Additionally, two examples of TBTs applications, in designing ODN to form triplex with duplex were presented. The energy calculation result revealed that 15-TCG is the best ligand of the HIV PPT duplex. The comparative analysis of energies of the conjugated TBTs provides directive significance for designing ODN strand that is easy to form triplex in theory. (C) 2002 Elsevier Science B.V. All rights reserved.