Evaluation on propagation of common carp (Cyprinus carpio Lin.) with hormonal and natural stimuli

The success of breeding of common carp (Cyprinus carpio) using hormonal inducement and environmental stimuli was evaluated considering different sex ratios, and natural and artificial substrates. A total of 18 females (weighing 250 to 2200g) divided into 6 treatments were investigated. A successful spawning was observed in all the treatment groups, only. 66.66% female responded successfully to LHRH-A combined with dompheridone and 83.33% female in natural stimuli. Females induced with LHRH-A and dompheridone found prompt ovulation than that of natural stimulation. A significant variation (F=7.45, P<0.05) was found among the different treatment groups. The number of eggs released appear to depend on body weight (t=15.72, P<0.05), sex ratio (t=7.96, P<0.05) and percentage of ovulated females (t=5.34, P<0.05). Although environmentally stimulated females released more eggs than injected female (t=5.18, P<0.05) but their survival rate was similar (t=1.77, P<0.05). Comparison between the two approaches under the conditions of AIT hatchery shown that both are suitable for spawning induction in common carp. However, environmental stimulation is advantageous because of the less labor and lower cost required for ovulation.

Common microflora involved in spoilage of canned prawns

An elaborate survey was carried out to ascertain the common types of micro-organisms responsible for spoilage in canned prawns. Among nearly 1.500 strains isolated from bacteriologically defective cans, 60% were Gram positive spore formers of the Bacillus type. Other types isolated belonged to Gram positive cocci, Gram negative rods, Gram positive non-spore forming rods, Gram negative cocci and coccoids. No anaerobe could be isolated. The predominant Gram positive spore formers were identified as Bacillus pantothenticus, B. firmus, B. brevis and B. Pumilus species.

Effect of some environmental factors on the acute toxicity of deltamethrin to common carp: a laboratory study under aerobic condition

The toxicity of xenobiotic in aquatic ecosystems is influenced by many factors such as ambient temperature, water hardness, pond soil type, etc. In the present study, it was observed that air temperature, water hardness and soil sediment have profound influence on the toxicity of deltamethrin to common carp fry (ay. length 3.5 ± 0.5 cm, ay. weight 0.58 ± 0.25 g); 96h LC(sub)50 values for common carp at 38.07 ± 2.20°C maximum and 27.86 ± 1.22°C minimum air temperature in soft and very hard water were 0.102 and 0.495 µg lˉ¹, respectively. This value had increased significantly to 2.37 and 3.02 µg at 30.55 ± 1.21°C maximum and 26.04 ± 0.61°C minimum air temperature, respectively. When sediment was included, 96h LC(sub)50 at 38.07°C maximum temperature in very hard water was 1.808 µg 1ˉ¹ and this had increased to 8.073 µg 1ˉ¹ when tested at 30.55°C maximum temperature. Due to the 7.5°C increase in maximum and 1.7°C in minimum temperature, toxicity increased significantly. Lower toxicity in very hard water in comparison to soft water may be due to the lower solubility of deltarnethrin and high level of calcium. Adsorption reaction of deltamethrin with clay, humus, FeOOH, MnOOH and particulate organic carbon, and complexation reaction with dissolved organic carbon were responsible for the lowered toxicity in the experiment with sediment. Exposure time had no significant effect on acute toxicity of deltamethrin.

Studies on the seasonal cycle of sea surface temperatures, salinities, oxygen and phytoplankton in Koddiyar Bay, Trincomalee in relation to the shore seine fishery

In Sri Lanka waters, Durairatnam (1963, 1969) had reported on the seasonal variation of plankton at Puttalam lagoon, Dutch Bay, Portugal Bay and in the inshore and off shore waters off Colombo. Similar investigations were carried out at Koddiyar Bay especially in the estuarine waters where the three tributaries of the river Mahaveli empty their waters into the bay. The estuary is perennial. The fishes constituting the estuarine fisheries are mostly shallow water marine species which can tolerate considerable variations of salinities. Prawns and crabs also constitute a very valuable fishery in estuarine waters.

Duty cycle and modelling considerations in three-phase induction motor drives for washing machines

Three-phase induction motors offer significant advantages over commutator motors in some domestic appliances. Models for wide speed range three-phase induction motors for use in a horizontal axis washing machine have been developed using the MEGA finite element package with an external formulation for calculating iron losses. Motor loss predictions have been verified using a novel high accuracy calorimeter. Good agreement has been observed over a wide speed range at different loadings. The model is used to predict motor temperature rise under typical washing machine loading conditions to ensure its limiting temperature is not exceeded and enables alternative designs to be investigated without recourse to physical prototypes. © 2005 IEEE.

Fracture and energy partitioning in uncooked and cooked noodles

Humans perform fascinating science experiments at home on a daily basis when they undertake the modification of natural and naturally-derived materials by a cooking process prior to consumption. The material properties of such foods are of interest to food scientists (texture is often fundamental to food acceptability), oral biologists (foods modulate feeding behavior), anthropologists (cooking is probably as old as the genus Homo and distinguishes us from all other creatures) and dentists (foods interact with tooth and tooth replacement materials). Materials scientists may be interested in the drastic changes in food properties observed over relatively short cooking times. In the current study, the mechanical properties of one of the most common (and oldest at 4,000+ years) foods on earth, the noodle, were examined as a function of cooking time. Two types of noodles were studied, each made from natural materials (wheat flour, salt, alkali and water) by kneading dough and passing them through a pasta-making machine. These were boiled for between 2-14 min and tested at regular intervals from raw to an overcooked state. Cyclic tensile tests at small strain levels were used to examine energy dissipation characteristics. Energy dissipation was >50% per cycle in uncooked noodles, but decreased by an order of magnitude with cooking. Fractional dissipation values remained approximately constant at cooking times greater than 7 min. Overall, a greater effect of cooking was on viscoplastic dissipation characteristics rather than on fracture resistance. The results of the current study plot the evolution of a viscoplastic mixture into an essentially elastic material in the space of 7 minutes and have broad implications for understanding what cooking does to food materials. In particular, they suggest that textural assessment by consumers of the optimally cooked state of food has a definite physical definition. © 2007 Materials Research Society.

The silicon backplane design for an LCOS polarization-insensitive phase hologram SLM

Polarization-insensitivity is achieved in a reflective spatial light modulator by laying a quarter-wave plate (QWP) at the incident wavelength directly over the mirror pixels of a silicon backplane, and forming a nematle Fréedrickcz cell over the QWP to modulate the reflected phase. To achieve the highest drive voltage from the available silicon process, a switched voltage common front electrode design is described, with variable amplitude square wave drive to the pixels to maintain constant root-mean-square drive and minimize phase fluctuations during the dc balance refresh cycle. The silicon has been fabricated and liquid-crystal-on-silicon cells both with and without the QWP assembled; applications include optically transparent switches for optical networks, beam steering for add-drop multiplexers for wavelength-division- multiplexing telecommunications, television multicast, and holographic projection.

A common SNP of MCPH1 is associated with cranial volume variation in Chinese population

Microcephaly (MCPH) genes are informative in understanding the genetics and evolution of human brain volume. MCPH1 and abnormal spindle-like MCPH associated (ASPM) are the two known MCPH causing genes that were suggested undergone recent positive selectio

Cryopreservation of sperm of common carp, Cyprinus carpio and silver barb, Barbonymus gonionotus for genetically improved seed production

Experiments were conducted to develop and standardize the protocols for cryopreservation of sperm of common carp, Cyprinus carpio and also for using the cryopreserved sperm for fertilization of eggs. Nine extender solutions as Alsever's solution, kurokura-1, kurokura-2, urea egg-yolk, egg-yolk citrate, 0.6% glucose, 0.9% NaCl, Ma and Mb, and five cryoprotectants namely ethanol, methanol, dimethylsulfoxide (DMSO), dimethylamine (DMA) and glycerol were tested. The cryoprotectants were mixed at 10% concentration of the extenders (v/v) to make the cryodiluents. Milt and cryodiluents were mixed at a ratio of 1:9 for Alsever's solution, kurokura-1, kurokura-2, 0.6% glucose and 0.9% NaCl, 1:4 for urea egg-yolk, egg-yolk citrate, Ma and Mb. Among the cryodiluents Alsever's solution mixed with either ethanol or methanol was found to be suitable and it produced more than 90% and 80% spermatozoan motility at equilibrium and post-thaw periods, respectively. Kurokura-1 and kurokura-2 when mixed with the same cryoprotectants showed good spermatozoan motility at equilibrium period (80-90%) but the motility was reduced (30-55%) at post-thaw state. Other extenders did not produce acceptable sperm-motility and in some cases the frozen milt became clotted. Different dilution ratios (1:1, 1:2, 1:4, 1:5, 1:7, 1:9, 1:12, 1:15, 1:20) were formulated for obtaining a suitable milt dilution, the dilution ratio of 1: 9 (milt : cryodiluent) demonstrated the highest post-thaw spermatozoan motility (80%) in Alserver's solution. The optimum concentration of cryoprotectants in the cryodiluents was determined, 10% concentration level was found to be effective to produce the highest number of spermatozoan motility in comparison to the other concentrations (5%, 15%, 20% 30%). Sperm preserved with the cryodiluent Alsever's solution along with either methanol or ethanol was found to be effective to fertilize eggs and produce hatchlings. The hatching rates ranged between 1.48% and 14.76%, compare to control. The fish produced through use of cryopreserved sperm and normal sperm were found to grow well and no significant (P<0.05) growth difference was observed between them. In case of silver barb, Barbonymus gonionotus, sperm tested against six extenders such as egg-yolk citrate, urea-egg-yolk, kurokura-1, kurokura-2, 0.9% NaCl and modified fish ringer (MFR) solution. Cryoprotectants used were the same as those of C. carpio. Milt was diluted with the cryodiluent at a ratio of 1:4 for egg-yolk citrate and urea-egg-yolk, 1:5 for kurokura-1 and 1:9 for 0.9% NaCl, MFR and kurokura-2. The cryoprotectant concentration was maintained at 10% of the extender (v/v) in all the cases. Among the extenders, egg-yolk citrate and urea-egg-yolk mixed with 10% DMSO, methanol and ethanol produced 50% post-thaw spermatozoan motility, whereas DMA and glycerol provided only 10% motility. Trials on milt dilution ratio and cryoprotectant concentration are being conducted. Fertilization trials are also underway.

Multi-dimensional conditional moment closure modelling applied to a heavy-duty common-rail diesel engine

A multi-dimensional combustion code implementing the Conditional Moment Closure turbulent combustion model interfaced with a well-established RANS two- phase flow field solver has been employed to study a broad range of operating conditions for a heavy duty direct-injection common-rail Diesel engine. These conditions include different loads (25%, 50%, 75% and full load) and engine speeds (1250 and 1830 RPM) and, with respect to the fuel path, different injection timings and rail pressures. A total of nine cases have been simulated. Excellent agreement with experimental data has been found for the pressure traces and the heat release rates, without adjusting any model constants. The chemical mechanism used contains a detailed NOx sub-mechanism. The predicted emissions agree reasonably well with the experimental data considering the range of operating points and given no adjustments of any rate constants have been employed. In an effort to identify CPU cost reduction potential, various dimensionality reduction strategies have been assessed. Furthermore, the sensitivity of the predictions with respect to resolution in particular relating to the CMC grid has been investigated. Overall, the results suggest that the presented modelling strategy has considerable predictive capability concerning Diesel engine combustion without requiring model constant calibration based on experimental data. This is true particularly for the heat release rates predictions and, to a lesser extent, for NOx emissions where further progress is still necessary. © 2009 SAE International.

Effect of feeding frequency on the growth of common carp (Cyprinus carpio L.) fry

A laboratory-feeding trail was conducted for 45 days with fry of common carp Cyprinus carpio L. (0.45±0.03g) in aquaria in a static indoor fish rearing system. The fry were fed on a pelleted diet containing 33% crude protein having fishmeal as major protein source. The fish fry in five treatments A, B, C, D, and E, each with two replicates were fed on 5% daily ration divided into different feeding frequencies of 2, 3, 4, 5 and 6 times a day respectively in order to observe the growth performance. Each replicate contained 15 fry having total initial weight of 6.87±0.31g. At the end of the feeding trial, significantly different and higher (p<0.05) growth response was observed in treatment C having a feeding frequencies of 4 times a day. Significantly the highest and the lowest percent growth of 334.30 and 218.91% were observed in fish fed on the diet (Treatment C) with 4 times and (Treatment A) 2 times feeding frequencies per day, respectively. Food conversion ratio (FCR) of 1.78 was significantly higher (p

Effect of stocking density on the production of common carp (Cyprinus carpio Lin.) in cages at Kaptai lake, Bangladesh

Growth, survival and food conversion ratio (FCR) of Cyprinus carpio in cages at different stocking density were studied in Kaptai lake. Fingerlings of common carp (12.47 ± 4.29 g) were stocked at 25/m2 , 50/m2 and 75/m2 each with replication in six floating net cages each of Sm x Sm x 4m and reared for 240 days. The growth rate was inversely related to the stocking density with the mean weights of 325.5 ± 11.74 g, 268.99± 8.44 g and 167.0 ± 11.66 g at low, medium and high densities, respectively. At harvest, standing crop biomass averaged 7 .82, 12.83 and 11.58 kg with the survival of 98.9%, 97.6% and 94.4% and food conversion ratios of 4.51, 3.82 and 4.21 for the above three densities, respectively. Weight gain and production at density 25 fish/m 2 were significantly different (p< 0.01) from other two densities. Water quality was not affected in the cages having different stocking densities.

Immnunomodulatory and cytotoxic effects of aqueous leaf extracts of certain plants on common carp, Cyprinus carpio

Effect of aqueous leaf extracts of Catheranthus roseus, Calotropis gigantium and Datura stromoneum on common carp, Cyprinus carpio were investigated. C. carpio were separately fed with 1 and 2% aqueous extracts of these three plant leaves for a period of seven days. In 1% Catheranthus roseus of leaf extract fed group no significant tissue level changes were recorded. One and 2% of other two species fed treated group showed mild to severe necrotic and cellular changes in liver, kidney and spleen. Immunologically, significant rise in antibody titre and respiratory burst activity was recorded for 1% Catheranthus roseusfed group.