Benthic habitats of Fish Bay, Coral Bay and the St. Thomas East End Reserve

NOAA’s National Centers for Coastal Ocean Science Biogeography Branch has mapped and characterized large portions of the coral reef ecosystems inside the U.S. coastal and territorial waters, including the U.S. Caribbean. The complementary protocols used in these efforts have enabled scientists and managers to quantitatively and qualitatively compare marine ecosystems in tropical U.S. waters. The Biogeography Branch used similar protocols to generate new benthic habitat maps for Fish Bay, Coral Bay and the St. Thomas East End Reserve (STEER). While this mapping effort marks the third time that some of these shallow-water habitats (≤40 m) have been mapped, it is the first time that nearly 100% of the seafloor has been characterized in each of these areas. It is also the first time that high resolution imagery describing seafloor depth has been collected in each of these areas. Consequently, these datasets provide new information describing the distribution of coral reef ecosystems and serve as a spatial baseline for monitoring change in the Fish Bay, Coral Bay and the STEER. Benthic habitat maps were developed for approximately 64.3 square kilometers of seafloor in and around Fish Bay, Coral Bay and the STEER. Twenty seven percent (17.5 square kilometers) of these habitat maps describe the seafloor inside the boundaries of the STEER, the Virgin Islands National Park and the Virgin Islands Coral Reef National Monument. The remaining 73% (46.8 square kilometers) describe the seafloor outside of these MPA boundaries. These habitat maps were developed using a combination of semi-automated and manual classification methods. Habitats were interpreted from aerial photographs and LiDAR (Light Detection and Ranging) imagery. In total, 155 distinct combinations of habitat classes describing the geology and biology of the seafloor were identified from the source imagery.

Benthic habitats of Buck Island Reef National Monument

NOAA’s Center for Coastal Monitoring and Assessment’s Biogeography Branch has mapped and characterized large portions of the coral reef ecosystems inside the U.S. coastal and territorial waters, including the U.S. Caribbean. The complementary protocols used in these efforts have enabled scientists and managers to quantitatively compare different marine ecosystems in tropical U.S. waters. The Biogeography Branch used these same general protocols to generate three seamless habitat maps of the Bank/Shelf (i.e., from 0 ≤50 meters) and the Bank/Shelf Escarpment (i.e., from 50 ≤1,000 meters and from 1,000 ≤ 1,830 meters) inside Buck Island Reef National Monument (BIRNM). While this mapping effort marks the fourth time that the shallow-water habitats of BIRNM have been mapped, it is the first time habitats deeper than 30 meters (m) have been characterized. Consequently, this habitat map provides information on the distribution of mesophotic and deep-water coral reef ecosystems and serves as a spatial baseline for monitoring change in the Monument. A benthic habitat map was developed for approximately 74.3 square kilometers or 98% of the BIRNM using a combination of semi-automated and manual classification methods. The remaining 2% was not mapped due to lack of imagery in the western part of the Monument at depths ranging from 1,000 to 1,400 meters. Habitats were interpreted from orthophotographs, LiDAR (Light Detection and Ranging) imagery and four different types of MBES (Multibeam Echosounder) imagery. Three minimum mapping units (MMUs) (100, 1,000 and 5,000 square meters) were used because of the wide range of depths present in the Monument. The majority of the area that was characterized was deeper than 30 m on the Bank/Shelf Escarpment. This escarpment area was dominated by uncolonized sand which transitioned to mud as depth increased. Bedrock was exposed in some areas of the escarpment, where steep slopes prevented sediment deposition. Mesophotic corals were seen in the underwater video, but were too sparsely distributed to be reliably mapped from the source imagery. Habitats on the Bank/Shelf were much more variable than those seen on the Bank/Shelf Escarpment. The majority of this shelf area was comprised of coral reef and hardbottom habitat dominated by various forms of turf, fleshy, coralline or filamentous algae. Even though algae was the dominant biological cover type, nearly a quarter (24.3%) of the Monument’s Bank/Shelf benthos hosted a cover of 10%-<50% live coral. In total, 198 unique combinations of habitat classes describing the geography, geology and biology of the sea-floor were identified from the three types of imagery listed above. No thematic accuracy assessment was conducted for areas deeper than about 50 meters, most of which was located in the Bank/Shelf Escarpment. The thematic accuracy of classes in waters shallower than approximately 50 meters ranged from 81.4% to 94.4%. These thematic accuracies are similar to those reported for other NOAA benthic habitat mapping efforts in St. John (>80%), the Main Eight Hawaiian Islands (>84.0%) and the Republic of Palau (>80.0%). These digital maps products can be used with confidence by scientists and resource managers for a multitude of different applications, including structuring monitoring programs, supporting management decisions, and establishing and managing marine conservation areas. The final deliverables for this project, including the benthic habitat maps, source imagery and in situ field data, are available to the public on a NOAA Biogeography Branch website (http://ccma.nos.noaa.gov/ecosystems/coralreef/stcroix.aspx) and through an interactive, web-based map application (http://ccma.nos.noaa.gov/explorer/biomapper/biomapper.html?id=BUIS). This report documents the process and methods used to create the shallow to deep-water benthic habitat maps for BIRNM. Chapter 1 provides a short introduction to BIRNM, including its history, marine life and ongoing research activities. Chapter 2 describes the benthic habitat classification scheme used to partition the different habitats into ecologically relevant groups. Chapter 3 explains the steps required to create a benthic habitat map using a combination of semi-automated and visual classification techniques. Chapter 4 details the steps used in the accuracy assessment and reports on the thematic accuracy of the final shallow-water map. Chapter 5 summarizes the type and abundance of each habitat class found inside BIRNM, how these habitats compare to past habitat maps and outlines how these new habitat maps may be used to inform future management activities.

Boat wakes and their influence on erosion in the Atlantic Intracoastal Waterway, North Carolina

Boat wakes in the Atlantic Intracoastal Waterway (AIWW) of North Carolina occur in environments not normally subjected to (wind) wave events, making sections of AIWW potentially vulnerable to extreme wave events generated by boat wakes. The Snow’s Cut area that links the Cape Fear River to the AIWW is an area identified by the Wilmington District of the U.S. Army Corps of Engineers as having significant erosion issues; it was hypothesized that this erosion could be being exacerbated by boat wakes. We compared the boat wakes for six combinations of boat length and speed with the top 5% wind events. We also computed the benthic shear stress associated with boat wakes and whether sediment would move (erode) under those conditions. Finally, we compared the transit time across Snow’s Cut for each speed. We focused on two size classes of V-hulled boats (7 and 16m) representative of AIWW traffic and on three boat speeds (3, 10 and 20 knots). We found that at 10 knots when the boat was plowing and not yet on plane, boat wake height and potential erosion was greatest. Wakes and forecast erosion were slightly mitigated at higher, planing speeds. Vessel speeds greater than 7 knots were forecast to generate wakes and sediment movement zones greatly exceeding that arising from natural wind events. We posit that vessels larger than 7m in length transiting Snow’s Cut (and likely many other fetch-restricted areas of the AIWW) frequently generate wakes of heights that result in sediment movement over large extents of the AIWW nearshore area, substantially in exceedance of natural wind wave events. If the speed, particularly of large V-hulled vessels (here represented by the 16m length class), were reduced to pre-plowing levels (~ 7 knots down from 20), transit times for Snow’s Cut would be increased approximately 10 minutes but based on our simulations would likely substantially reduce the creation of erosion-generating boat wakes. It is likely that boat wakes significantly exceed wind wave background for much of the AIWW and similar analyses may be useful in identifying management options.

On the relative catch efficiency of different shaped otter boards in bottom trawling

Three different types of otter boards varying in shape were tried to find out their relative catch efficiency. They were operated with two types of nets. The results indicated that the curved otter boards gave more catch per unit effort with all the combinations of nets and riggings tried.

Increasing farm income by introducing fish culture in deepwater rice environment

Fish culture in deep-water-rice (DWR) environment using net pen and polder systems was evaluated. In net pen rohu and Thai silver barb were cultured, whereas a 5-species combination (rohu, mrigal, common carp, grass carp and Thai silver barb) were cultured with BR3 rice variety and DWR. Boro-fish production system produced 2.8 t/ha of fish and 7.33 t/ha of rice in polder system with 5-species combinations.

Studies on the effect of compounded feeds on the growth of juvenile Banana prawn Penaeus merguiensis

Laboratory experiments were conducted to determine the effect of compounded feeds on growth of juveniles (3 to 4 cm) of the Banana prawn Penaeus merguiensis. In all, seven diets were prepared with different combinations of locally available ingredients. Diascure, a local tuber was used as source of carbohydrate and vitamin mineral mixture (1%) was used in all the diets. The results indicated that diets with groundnut cake (diet 2, 3, 5 and 7) produced better survival and growth. In diets 4 and 6 growth was good but survival was very poor. Amongst all the diets, diet 7 produced significantly better growth, survival and food conversion ratio.

Materials selection in mechanical design

A novel materials-selection procedure has been developed and implemented in software. The procedure makes use of Materials Selection Charts: a new way of displaying material property data; and performance indices: combinations of material properties which govern performance. Optimization methods are employed for simultaneous selection of both material and shape.

Avaliaçāo económica das medidas de gestāo da pescaria de camarāo do Banco de Sofala

The objective of this study is to recommend management measures for the industrial shallow-water shrimp fishery in Sofala Bank after estimating the economic affects considering different alternatives and assessing the level of exploitation of this fishery. The short-term economic analysis was based on the results of the total catch and average weight of the shrimp caught obtained by a simulation model in which different combinations of exploitation patterns and levels of fishing intensity were tasted. The variable parameters used were the mash size and the duration and period of the closed season, and all the remaining parameters were fixed. Economic and production data of the main industrial shrimp fishing companies for the period 1987-90 were also used.

Tribological properties of mems materials measured on a small-scale device

Micro-electro-mechanical systems, MEMS, is a rapidly growing interdisciplinary technology within the general field of Micro-Systems Technology which deals with the design and manufacture of miniaturised machines with major dimensions at the scale of tens, to perhaps hundreds, of microns. Because they depend on the cube of a representative dimension, component masses and inertias rapidly become small as size decreases whereas surface and tribological effects, which often depend on area, become increasingly important. Although MEMS components and their areas of contact are small, tribological conditions, measured by contact pressures or acceptable wear rates, are demanding and technical and commercial success will require careful measurement and precise control of surface topography and properties. Fabrication of small numbers of MEMS devices designed to test potential material combinations can be prohibitively expensive and thus there is a need for small scale test facilities which mimic the contact conditions within a micro-machine without themselves requiring processing within a full semiconductor foundry. The talk will illustrate some initial experimental results from a small-scale experimental device which meets these requirements, examining in particular the performance of Diamond-Like-Carbon coatings on a silicon substrate. Copyright © 2005 by ASME.

Karyotypic relationships of horses and zebras: results of cross-species chromosome painting

Complete sets of chromosome-specific painting probes, derived from flow-sorted chromosomes of human (HSA), Equus caballus (ECA) and Equus burchelli (EBU) were used to delineate conserved chromosomal segments between human and Equits burchelli, and among four equid species, E. przewalskii (EPR), E. caballus, E. burchelli and E. zebra hartmannae (EZH) by cross-species chromosome painting. Genome-wide comparative maps between these species have been established. Twenty-two human autosomal probes revealed 48 conserved segments in E. burchelli. The adjacent segment combinations HSA3/21, 7/16p, 16q/19q, 14/15, 12/22 and 4/8, presumed ancestral syntenies for all eutherian mammals, were also found conserved in E. burchelli. The comparative maps of equids allow for the unequivocal characterization of chromosomal rearrangements that differentiate the karyotypes of these equid species. The karyotypes of E. przewalskii and E. caballus differ by one Robertsonian translocation (ECA5 = EPR23 + EPR24); numerous Robertsonian translocations and tandem fusions and several inversions account for the karyotypic differences between the horses and zebras. Our results shed new light on the karyotypic evolution of Equidae. Copyright (C) 2003 S. Karger AG, Basel.

Reciprocal chromosome painting among human, aardvark, and elephant (superorder Afrotheria) reveals the likely eutherian ancestral karyotype

The Afrotheria, a supraordinal grouping of mammals whose radiation is rooted in Africa, is strongly supported by DNA sequence data but not by their disparate anatomical features. We have used flow-sorted human, aardvark, and African elephant chromosome painting probes and applied reciprocal painting schemes to representatives of two of the Afrotherian orders, the Tubulidentata (aardvark) and Proboscidea (elephants), in an attempt to shed additional light on the evolutionary affinities of this enigmatic group of mammals. Although we have not yet found any unique cytogenetic signatures that support the monophyly of the Afrotheria, embedded within the aardvark genome we find the strongest evidence yet of a mammalian ancestral karyotype comprising 2n = 44. This karyotype includes nine chromosomes that show complete conserved synteny to those of man, six that show conservation as single chromosome arms or blocks in the human karyotype but that occur on two different chromosomes in the ancestor, and seven neighbor-joining combinations (i.e., the synteny is maintained in the majority of species of the orders studied so far, but which corresponds to two chromosomes in humans). The comparative chromosome maps presented between human and these Afrotherian species provide further insight into mammalian genome organization and comparative genomic data for the Afrotheria, one of the four major evolutionary clades postulated for the Eutheria.

Cross-species chromosome painting in the golden mole and elephant-shrew: support for the mammalian clades Afrotheria and Afroinsectiphillia but not Afroinsectivora

Cross-species painting (fluorescence in situ hybridization) with 23 human (Homo sapiens (HSA)) chromosome-specific painting probes (HSA 1-22 and the X) was used to delimit regions of homology on the chromosomes of the golden mole (Ghrysochloris asiaticus) and elephant-shrew (Elephantulus rupestris). A cladistic interpretation of our data provides evidence of two unique associations, HSA 1/19p and 5/21/3, that support Afrotheria. The recognition of HSA 5/3/21 expands on the 3/21 synteny originally designated as an ancestral state for all eutherians. We have identified one adjacent segment combination (HSA2/8p/4) that is supportive of Afroinsectiphillia (aardvark, golden mole, elephant-shrew). Two segmental combinations (HSA 10q/17 and HSA 3/20) unite the aardvark and elephant-shrews as sister taxa. The finding that segmental syntenies in evolutionarily distant taxa can improve phylogenetic resolution suggests that they may be useful for testing sequence-based phylogenies of the early eutherian mammals. They may even suggest clades that sequence trees are not recovering with any consistency and thus encourage the search for additional rare genomic changes among afrotheres.

Species interaction between carp species in polyculture system

A three months experiment was conducted to study the species interactions of two carp species in polyculture system under supplemental feeding. Four species of fishes such as silver carp (Hypophthalmichthys molitrix), mrigal (Cirrhina cirrhosus), catla (Catla catla) and common carp (Cyprinus carpio) were cultured in four different combinations each containing two species. The combination of silver carp and mrigal in treatment 1, and silver carp and common carp in treatment 2 resulted better growth and production than other two treatments of different combinations of catla and common carp, and catla and mrigal.

17 beta-Estradiol and progesterone improve in-vitro cytoplasmic maturation of oocytes from unstimulated prepubertal and adult rhesus monkeys

BACKGROUND: Effects of 17beta-estradiol and progesterone on rhesus monkey oocyte maturation in vitro were evaluated by embryo development subsequent to IVF. METHODS AND RESULTS: In experiment 1, immature cumulus-oocyte complexes collected from unstimulated adult females during the non-breeding season were matured in modified medium CMRL-1066 containing various combinations of gonadotrophins (FSH + LH), estradiol and/or progesterone. Formation of morulae and blastocysts was greatest in oocytes matured in medium containing estradiol and/or progesterone, with or without gonadotrophins (morula 38-46%, blastocyst 14-20%) than in control oocytes matured without estradiol or progesterone (morula 14%, blastocyst 0%). In experiment 2, cumulus-oocyte complexes from unstimulated prepubertal female monkeys were matured in medium with gonadotrophins, estradiol or progesterone. The best development to the morula stage was obtained with oocytes matured with gonadotrophins and estradiol or gonadotrophins and progesterone (43 and 25 morulae, respectively), while control oocytes matured with gonadotrophins but without steroid hormones gave the poorest morula developmental response (12%). However, there was no difference in blastocyst development across all groups (0-3%). CONCLUSIONS: These results demonstrate that during rhesus monkey oocyte maturation in vitro: (i) estradiol or progesterone can improve oocyte developmental competence; (ii) immature oocytes from prepubertal versus adult females have differential responses to challenge with estradiol or progesterone.

Culture feasibility of silver barb (Barbodes gonionotus Bleeker) and GIFT with shrimp (Penaeus monodon Feb.) in brackishwater pond

An experiment was conducted to understand the culture feasibility of sliver barb (Barbodes gonionotus) and GIFT (Genetically Improved Farmed Tilapia) with shrimp (Penaeus monodon). There were three different treatment (T) combinations: (T1) shrimp (10,000/ha) and silver barb (10,000/ha), (T2) shrimp (10,000/ha) and GIFT (10,000/ha), and (T3) shrimp (10,000/ha). Shrimp, after 120 days of culture, attained an average weight of 23.77g in T1, followed by T3 (23.70g). The highest average weight was recorded in T2 (24.93g). The specific growth rate (SGR) of shrimp was 6.9%, 6.94% and 6.9% for T1 T2 and T3, respectively. The SGR for the B. gonionotus and GIFT was 2.56% and 4.26%, respectively. The final weight of silver barb was 69.75g and that of GIFT was 161.83g. Survival of shrimp was higher (65.50%) in T2, followed by T3 (59.97%) and T1 (57.03%). Survival rate of silver barb (58.10%) was lower compared to that of GIFT (78.43%). Sporadic and scanty mortality of silver barb with a symptom of blind-red-protruded eye, swollen belly and body lesion was observed. Production of shrimp was higher of 284.05 kg/ha in monoculture, followed 162.47 kg/ha in concurrent culture with silver barb and 136.77 kg/ha culture with GIFT. In spite of similar stocking density of B. gonionotus and GIFT in T1 and T2, respectively, the production of GIFT was higher (1272.95 kg/ha) than that of silver barb ( 402.72kg/ha). Survival, final weight and production rates of shrimp among the treatments were found insignificant while total production of shrimp/fish was found to vary significantly (P