Desenvolvimento e caracterização de compósitos poli(tereftalato de etileno) reciclado (PET reciclado) com flocos de vidro.

The growing concern with the solid residues management, observed in the last decade, due to its huge amount and impact, has motivated the search for recycling processes, where these residues can be reprocessed to generate new products, enlarging the cycle of materials and energy which are present. Among the polymeric residues, there is poly (ethylene terephthalate) (PET). PET is used in food packaging, preferably in the bottling of carbonated beverages. The reintegration of post-consumer PET in half can be considered a productive action mitigation of environmental impacts caused by these wastes and it is done through the preparation of several different products at the origin, i.e. food packaging, with recycling rates increasing to each year. This work focused on the development and characterization mechanical, thermal, thermo-mechanical, dynamic mechanical thermal and morphology of the pure recycled PET and recycled PET composites with glass flakes in the weight fraction of 5%, 10% and 20% processed in a single screw extruder, using the following analytical techniques: thermogravimetry (TG), differential scanning calorimetry (DSC), tensile, Izod impact, Rockwell hardness, Vicat softening temperature, melt flow rate, burn rate, dynamic mechanical thermal analysis (DMTA) and scanning electron microscopy (SEM). The results of thermal analysis and mechanical properties leading to a positive evaluation, because in the thermograms the addition of glass flakes showed increasing behavior in the initial temperatures of thermal decomposition and melting crystalline, Furthermore was observed growing behavior in the mechanical performance of polymer composites, whose morphological structure was observed by SEM, verifying a good distribution of glass flakes, showing difference orientation in the center and in the surface layer of test body of composites with 10 and 20% of glass flakes. The results of DMTA Tg values of the composites obtained from the peak of tan ä showed little reductions due to poor interfacial adhesion between PET and recycled glass flakes.

Estudo da potencialidade da incorporação de resíduo de granito e da queima da casca do café em cerâmica vermelha

The industrial production of ornamental rocks and the burning of coffee husk generate waste that is discarded into the environment. However, with the study of the incorporation of these residues in ceramic products, may be found an alternative to reducing environmental impacts and detrimental effects on human health caused by its indiscriminate disposal of waste in nature. Thus, this work aimed to study the addition of ashes of the coffee husk and granite residue in matrix of red ceramic. The raw materials were dry milled and sieved to mesh 100. To characterize the raw materials were carried out analyzes of X-ray diffraction (XRD), X-ray fluorescence (XRF), particle size analysis (PSA), differential thermal analysis (DTA) and thermogravimetric analysis (TG). Six formulations were prepared where the clay content was kept constant (70%wt) and ashes contents and granite residue varied from 10, 15, 20 and 30%. Dilatometrics analyzes were performed at four selected formulations, containing them: 100% clay (A100); 70% clay and 30% ashes (A70C30); 70% clay and 30% granite residue (A70G30); and 70% clay, 15% granite residue and 15% ashes (A70G15C15). The samples were prepared by uniaxial compaction with pressure of 25 MPa, and fired at temperatures of 800°C, 850ºC, 900ºC, 950ºC, 1000ºC and 1100°C. Assays were performed to determine the linear shrinkage of burning (LSB), water absorption (WA), apparent porosity (AP), density (D) and tensile bending. Also were performed analyzes of X-ray diffraction (XRD) and scanning electron microscopy (SEM) of the samples fired. The formulations incorporating granite residue and/or ashes reached the required limits of water absorption according to NBR 15270-1 and NBR 15310 and tensile bending according to classical literature (SANTOS, 1989) necessary for the production of tiles and ceramic block for masonry sealing

Adição de subprodutos da cinza da casca de café (coffea canephora) em massa cerâmica para porcelanato

To produce porcelain tiles fluxing agents are used in order to obtain a liquid phase during firing. This liquid phase fills the pores decreasing porosity, water absorption and contributes to material densification. In the porcelain tiles industry, feldspar is the main flux material used, with quantities ranging between 35 and 50%. Studies focus on the discovery of materials with flux characteristics that can reduce the consumption of feldspar by porcelain tiles industry. In this context, the coffee husk ashes, a residue obtained when coffee husks are burned to produce heat for the dryers during the processing of the green fruit, have as main chemical constituents potassium, calcium and magnesium, giving them characteristics of fluxing material. Brazil is the largest coffee producer in the world and is responsible for over 30% of the world s production. In this work a physical treatment of coffee husk ash was carried out in order to eliminate the organic matter and, after this, two by-products were obtained: residual wastes R1 and R2. Both residues were added separately as single fluxes and also in association with feldspar in mixtures with raw materials collected in a porcelain industry located in Dias d Ávila-Ba. The addition of these residues aimed to contribute to the reduction of the consumption of feldspar in the production of porcelain tiles. Specimens were produced with dimensions of 60 mm x 20 mm x 6 mm in an uniaxial die with compacting pressure of 45 MPa. The samples were heated to a temperature of 1200 °C, for 8 minutes. Tests were performed to characterize the raw materials by XRF, XRD, particle size analysis, DTA and TGA and, additionally, the results of the physical properties of water absorption, apparent porosity, linear shrinkage, density, dilatometry, flexural strength and SEM of sintered body were analyzed. Additions of less than 8% of the residue R1 contributed to the decrease of porosity, but the mechanical strength of the samples was not satisfactory. Additions of 5% the R2 residue contributed significantly to decrease the water absorption and apparent porosity, and also to increase the mechanical strength. Samples with addition of feldspar associated with the R2 residue, in proportions of 6.7% of R2 and 6.7% of feldspar, led to results of water absorption of 0.12% and mechanical strength of 46 MPa, having parameters normalized to the manufacture of porcelain stoneware tiles

Períodos de interferência de Commelina benghalensis na cultura do café recém-plantada

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Brachiaria decumbens supresses the initial growth of Coffea arabica

Brachiaria decumbens vem se tornando uma das plantas daninhas mais freqüentes na infestação de cafezais em formação, pois além de sua elevada agressividade e dificuldade de controle, está ocorrendo expansão das áreas cafeeiras para locais anteriormente ocupados por pastagens. Objetivou-se neste trabalho avaliar os efeitos desta planta daninha, em densidades crescentes, sobre o desenvolvimento inicial de mudas de café (Coffea arabica L. cv. Catuaí Amarelo). O experimento foi conduzido em condições semi-controladas, sem limitação de água. Uma muda de café foi transplantada em caixa de amianto com capacidade para 70 L, preenchida com terra coletada da camada arável de um Latossolo Vermelho. Os tratamentos constaram de diferentes densidades de transplante de capim-braquiária, a saber: 0, 4, 8, 12, 16, 20, 24, 36, 48 e 60 plantas m-2. O ensaio foi conduzido por um período experimental de 120 dias após o plantio (DAP). Todas as características analisadas foram afetadas negativamente pela interferência da planta daninha, mas as que se mostraram mais sensíveis a essa interferência foram à área foliar e a biomassa seca das folhas. Houve redução de 41,8% na área foliar do cafeeiro quando conviveu com o capim-braquiária a partir da densidade de 8 plantas m-2, chegando a 68,7% na densidade de 60 plantas m-2. Também a partir da densidade de 8 plantas m-2, a redução na biomassa seca das folhas em relação à testemunha foi de 41,4% e na densidade de 60 plantas m-2 chegou a 72,8%. Brachiaria decumbens, a partir da densidade de 8 plantas m-2, interfere negativamente sobre as mudas de café até os 120 DAP.

ELOY DE SOUZA: UMA INTERPRETAÇÃO SOBRE O NORDESTE E OS DILEMAS DAS SECAS

The thought of Eloy de Souza is studied (1873-1959), that left a significant intellectual production in the journalistic, cultural and politicial scope on the Northeast and the dilemmas of the droughts. Through the method of content analysis, his journalistic and literary speech is investigated, looking at to understand the elaboration and/ or reiteration of categories, of representations and of values; it is verified how was conceived the constitution of the political thought and which is it´s principal slopes; the parliamentary speech, present in his interventions is analyzed in plenary session, participation in commissions and in his projects, particularly in the thematic area of the droughts. It is verified that his work is built in a political and ideological perspective inserting the bourgeoisie landowner's interests and Northeastern commercial and of it´s political strata, inside the historical block of agro-industry power that has as irradiation focus the area of the coffee represented politically by the oligarchies person from São Paulo and Minas Gerais. In that sense, two crucial categories emerge: the droughts and the country, as the Northeastern and Brazilian man's synthesis, with their resistance capacity and adaptation, and their creative effort in an adverse enviroment, that Eloy de Souza started to insert in his political speech. However, the vision that he passes of the "country suffer", expresses a certain idealization of a lifestyle that corresponds to a traditional dominance, that he want´s to be reproduced. Although it looked for the solution for the drought through the modernization of the economy by the adoption of advanced methods as the irrigation, his concern went back to the conservation of the economical and cultural political hegemony of that elite. Thus, his inquietude with the process of integration of the subordinate sections, justifies his consensual speech, harmonic as organic intellectual of the agrarian-commercial bourgeoisie of the Brazilian Northeast

Modo de aplicação e eficiência de inseticidas granulados sistêmicos para o controle de cigarras (Hemiptera: Cicadidae) do cafeeiro

Avaliou-se a eficiência de métodos de aplicação de inseticidas granulados sistêmicos para o controle das cigarras Quesada gigas (Olivier) e Dorisiana drewseni (Stål) do cafeeiro (Coffea arabica). O ensaio foi conduzido em cafezal cv. Mundo Novo com idade de seis anos, espaçamento de 3,5 X 1,5 m, com uma planta/cova, no ano agrícola 1992/1993. Utilizou-se um delineamento em blocos casualizados, com 21 tratamentos e 4 repetições, cada uma contendo parcelas de cinco plantas. Os tratamentos consistiram nas aplicações dos produtos triadimenol + disulfoton 1,5% + 7,5% (26 g/cova), aldicarb 150G (10,00 g/cova), ethoprophos 100G (30,00 g/cova), phorate 5G (80,00 g/cova) e terbufos 5G (40,00 g/cova) em quatro modalidades de aplicação: aplicador costal manual Mebuki TF8; canequinha, lançando o produto para o ápice da planta; aplicador tratorizado Kamaq CK2-AG; e sulcos em meia lua, abertos manualmente, na projeção da copa. As avaliações foram realizadas aos 70, 105 e 140 dias após aplicação dos produtos, onde foram efetuadas aberturas de trincheiras de 50 X 50 X 50cm por cova, procedendo-se a contagem do número de ninfas vivas. Concluiu-se que o aplicador costal manual e canequinha revelaram-se os mais eficientes (86,0 - 93,5% e 76,8 - 86,7%, respectivamente); aplicação tratorizada e sulcos na projeção de copa tiveram sua eficiência variável com o produto utilizado; terbufos apresentou maior redução da população (98,2 - 100%) e phorate (79,6 - 99,1%) e a mistura triadimenol + disulfoton (82,3 - 97,3%) apresentaram alta eficiência, não diferindo do terbufos. Aldicarb apresentou desempenho satisfatório (68,1 - 85,0%) conforme o modo de aplicação e ethoprophos não foi eficaz quando aplicado com o aplicador costal manual (58,4%), canequinha (45,1%) e sulco (31,9%).

Curvas de crescimento do fruto de cafeeiro cv. Obatã IAC 1669-20 em diferentes alinhamentos de plantio

The growth of the coffee fruit is highly dependent on physiological and environmental factors. Environmental factors that most influence the yield of coffee during the critical growth stages are the minimum and maximum temperatures of air, which are affected by solar radiation and depend on the apparent path of the sun. This research work correlated dry mass versus fresh mass, and, fresh and dry mass as function of days after flowering of fruit coffee cv. Obata IAC 1669-20 planted in three different alignments based on the apparent trajectory of the sun, in Jaboticabal, SP. The planting was aligned according to the apparent path of the sun. There were three treatments with four replications, a total of twelve plots, each plot with one hundred plants of coffee, each treatment corresponded to an alignment of planting. The three alignments used showed no differences with respect the average fresh and dry mass. The growth rate of fruit, in fresh weight, was higher in the exponential phase, and in dry mass was higher in the linear stage. The dry weight (DW) can be estimated from the fresh weight (FW) using the model: DW = A1*exp(FW/t1). The sigmoidal model that represents the fruit growth in of coffee plants in fresh and/or dry mass in terms of days after flowering (DAF) was: FW(DW) = A2+[(A1-A2)/(1+exp(DAF-x0)/dx)].

O Cariri cearense: da ocupação do território à institucionalização da região metropolitana do Cariri

Urbanization in their mearing simpler, the agglomeration of people, occurred from the time that the productive activities have to be based on trade. The first cities arose when the evolution of agriculture allowed the production and storage of surpluses. However, with industrialization was that urbanization becomes intense, according to Singer (1987), the industrial revolution was to stage, from the beginning, the urban area. It requires, in its proximity, the presence of a large number of workers. With respect to the Cariri cearense, the occupation of its territory is associated with the movement of agricultural surpluses produced and reproduced under the hegemony of merchant capital and due to the development of extensive cattle that promoted the territorial occupation of Ceará. From the 1960s, the region has undergone changes in its productive structure due to industrial planning policies of the government of Ceará. However it was in the 1990s that the region itself as economic and urban polo because policies to attract investments from the state government of Ceará. This policy led to boosting trade and services marking the predominance of tertiary activities in the region, especially the retail, wholesale , medical services and education. Investments also consolidated the industrial park area making it diverse, especially the footwear industries, mining, non-metallic minerals, transport equipment, pharmaceutical chemical, food and beverages, rubber and leather and construction. Thus, the aim of this study was to review the region of Cariri cearense occupation of its territory institutionalizing its metropolitan region, to understand what factors influenced the Cariri cearense become an important area in urban and economic terms in the interior of Ceará. In order to develop this research in that refers to the methodological perspective, research is guided by bibliographic studies and also makes use of secondary data analysis (population, GDP, urbanization rate, employment) of the main databases the country, as IBGE, IPEADATA and RAIS - MTE

Desenvolvimento de Oligonychus ilicis em Coffea canephora sob diferentes temperaturas

Oligonychus ilicis (McGregor) (Acari) (Tetranychidae) é uma das principais pragas de Coffea canephora Pierre & Froehner. Neste trabalho, avaliou-se o efeito de diferentes temperaturas no desenvolvimento desse ácaro-vermelho em folhas de C. canephora, em laboratório. Confinaram-se 80 fêmeas em 40 arenas, constituídas de disco foliar de 4 cm, para oviposição nas temperaturas de 21, 24, 27, 30 e 33 ºC. Foram selecionados ao acaso pelo menos dois ovos para avaliar o desenvolvimento embrionário. Após a eclosão da larva, foram realizadas avaliações a cada 12 horas para obtenção da duração e sobrevivência larval. Para avaliar a longevidade foi transferido um ácaro macho da criação para as arenas com uma fêmea para acasalamento. O limite térmico de desenvolvimento inferior e a constante térmica foram determinados para a duração do desenvolvimento de ovo a adulto. O tempo de desenvolvimento das fases imaturas diminuiu com o aumento da temperatura. As fases de ovo, larva, protocrisálida, protoninfa, deutocrisálida, deutoninfa e teleiocrisálida variaram, respectivamente, de 10,4 a 4,3; 2,4 a 1,2; 2,0 a 1,0; 2,3 a 1,2; 1,9 a 1,0; 3,0 a 1,5 e 2,3 a 1,0 dias. O aumento da temperatura afetou o período de desenvolvimento, reduzindo a duração de ovo-adulto e a longevidade. O limite térmico inferior foi de 9,0 ºC para o período de ovo-adulto e constante térmica de 256,4 graus-dias. em condições de laboratório, a faixa de temperatura que favorece o desenvolvimento do ácaro em C. canephora foi de 24 a 30 ºC. O limite térmico inferior não é limitante para ocorrência de O. ilicis em áreas cultivadas com C. canephora no estado do Espírito Santo.

Selectivity of the plant growth regulators trinexapac-ethyl and sulfometuron-methyl to cultivated species

The aerial spraying of plant ripeners on sugar cane (Saccharum officinarum L.) crops causes often the contamination of neighboring areas, which subsidizes formal complaints from the neighbors. These contaminations are due to spraying taking place during inadequate environmental conditions or from technical mistakes during the application. One of the most important causes of this contamination is the susceptibility of the species being cultivated surrounding sugar cane. In order to evaluate the effects of sugar cane plant ripeners trinexapac-ethyl and sulfometuron-methyl on peanuts, cotton, potato, coffee, citrus, beans, sunflower, cassava, rubber, soybean, and grapes, eleven experiments - one for each species - were carried out from May 2009 to Jan. 2010. The field experiment was set according to a completely random design with five treatments and four replications. Just before or during flowering, a single treatment of trinexapac-ethyl at 100 or 200 g ha-1 and sulfometuron-methyl at 7.5 or 15 g ha-1 was applied to plants. A control treatment (plants not treated) for each species was part of each experiment. Trinexapac, at the doses of 100 and 200 g ha-1, showed selectivity to peanuts, cotton, potato, coffee, citrus, sunflower, cassava, rubber, soybean, and grape. At the lowest dose (100 g ha-1), it was selective for bean. Sulfometuron, at the dose of 7.5 g ha-1, was selective for peanuts and, at the two studied doses (7.5 and 15 g ha-1), it was selective for coffee, citrus, cassava, and rubber.

Cigarras (Hemiptera: Cicadidae: Tibicinidae) associadas ao cafeeiro: distribuição, hospedeiros e chave para as espécies

É apresentada a distribuição de 10 espécies de cigarras associadas ao cafeeiro, Coffea arabica, nos Estados de Minas Gerais, São Paulo e Paraná, Brasil. A informação sobre a distribuição geográfica destas espécies no Continente Americano, afora o Brasil, foi baseada na literatura. Para o Brasil, as localidades de ocorrência de cigarras foram baseadas na literatura, nos levantamentos realizados e em exemplares de coleções nacionais. Outros sete hospedeiros, além do cafeeiro, foram também registrados: esponjeira (Acacia farnesiana), sibipiruna (Caesalpinia peltophoroides), Cassia spp., amoreira (Morus alba), abacateiro (Persea americana), angico (Piptadenia sp.) e cacaueiro (Theobroma cacao). São apresentadas chaves de identificação, baseadas nas características gerais e na genitália masculina.

Estimativa da área foliar e capacidade de retenção de calda fitossanitária em cafeeiro

This work aimed to study the influence of the coffee tree leave's sizes, cv. Mundo Novo, on the evaluation of the leaf area and its spray retention capacity. Leaf mirroring on paper, leaf digitalization and imagine analyzes (QUANT) and rectangle circumscribed to the leaf methods were compared with LiCor area meter, model 3000. The spray retention capacity was evaluated with and without adjuvant addition at 0.1 and 0.2%. There weren't influence of the leave's size on the leaf area determination's methods. The leaves spray retention capacity was altered in function of the leaf size and of the adjuvant presence or not. The bigger spray retention capacity was observed at 7.7, 13.8 and 32 cm(2) leaves area. The spray without adjuvant exhibited biggest spray retention, with 77.1 mL m(-2). The spray additions of the 0.1 and 0.2% of adjuvant reduced in 64.8 and 67.3%, respectively, the spray retention capacity.

Eficiência de diferentes ramais de pulverização e volumes de calda no controle de Brevipalpus phoenicis na cultura do café

Efficiency of different spraying lances and spraying volumes on the control of Brevipalpus phoenicis in coffee crops. The mite Brevipalpus phoenicis is found on coffee plantations in Brazil since the 1950's. Responsible for indirect losses due to its role as vector of a virus disease, this mite species often requires control measures, the most common based on mitecide spraying. It was evaluated the mortality of B. phoenicis due the coverage of spraying liquid applied on coffee plants, with two types of lances used in air assisted sprayers and four spraying. volumes. Treatments were applied with mitecide abamectin (Vertimec 18 CE (R) at 0.4 L per hectare), in volumes of 250, 400, 550 and 700 L per hectare, with two types of lances for the nozzles. The control efficiency against B. phoenicis, deposition and coverage by spray liquid on coffee plants was evaluated. Experimental delineation was in randomized blocks, with eight treatments plus a check plot in four replications. The statistical analysis was carried in a factorial scheme 2x4+1. No significant differences in the number of mites were found between treatments. As regards spraying liquid deposition, it was observed an increment with increasing spraying volumes, with the plant tops showing the best deposition of spraying liquid. The duplication of the lances (nozzle branches) resulted in a significant increase in control efficiency for B. phoenicis compared with conventional branch and with check plot, without dependence of spraying volume.

Descrição das ninfas de Quesada gigas (Olivier) (Hemiptera: Cicadidae) associadas ao cafeeiro

Neste trabalho, as ninfas de Quesada gigas (Olivier) são descritas e ilustradas. Uma chave para o reconhecimento dos cinco ínstares ninfais é também apresentada. Foram analisados exemplares coletados em cafezais dos municípios de São Sebastião do Paraíso, Monte Santo de Minas e Patrimônio (Minas Gerais), Franca e Casa Branca (São Paulo). As amostras encontram-se preservadas em álcool a 80% e depositadas na Coleção Entomológica do Departamento de Fitossanidade da FCAV-UNESP, Câmpus de Jaboticabal. Os caracteres analisados foram: antenas, tecas alares, perna anterior, ápice da tíbia meso e metatorácicas e ápice abdominal do macho/fêmea. Foi adotada uma fórmula para indicar a configuração que é apresentada pelas estruturas presentes no fêmur anterior. Ninfas de Q. gigas de primeiro ínstar apresentam fórmula femoral 2-1-0, de segundo ínstar 2-1-3, de terceiro ínstar 2-1-5, de quarto ínstar 2-1-6 e as de quinto ínstar 2-2-8. O primeiro número refere-se à somatória dos dentes posteriores e dentes acessórios, o segundo ao número de dentes intermediários e o terceiro aos dentes do pente femoral. As estruturas apresentadas pelo fêmur protorácico constituem caracteres morfológicos adequados para a identificação dos ínstares ninfais de cigarras.