Economic analysis of cashew early dwarf Crop BRS - 189 depending on water levels and doses of potassium fertilization

Water and fertilizer among the production factors are the elements that most restrict the production of cashew. The precise amount of these factors is essential to the success of the crop yield. This research aimed to determine the best factor-product ratio and analyze technical and economic indicators, of productivity of the cashew clone BRS 189 (Anacardium occidentale) to production factors water and potassium. The experiment was conducted from May 2009 to December 2009 in an experimental area of 56.0 m x 112.0 m in the irrigated Curu - Pentecoste, located in the municipality of Pentecoste, Ceará, Brazil. Production factors water (W) and potassium (K) were the independent variables and productivity (Y), the dependent variable. Ten statistical models that have proven satisfactory for obtaining production function were tested. The marginal rate of substitution was obtained through the ratio of the potassium marginal physical product and the water marginal physical product. The most suited model to the conditions of the experiment was the quadratic polynomial without intercept and interaction. Considering that the price of the water was 0.10 R$ mm -1, the price of the potassium 2.19 R$ kg -1 and the price of the cashew 0.60 R$ kg-1, the amounts of water and K2O to obtain the maximum net income were 6,349.1 L plant-1 of water and 128.7 g plant -1year, -1 respectively. Substituting the values obtained in the production function, the maximum net income was achieved with a yield of 7,496.8 kg ha-1 of cashew.

THE IMPACT OF GUANXI TO MULTINATIONAL COMPANIES BUSINESS PERFORMACE, CORPORATE REPUTATION, NEGOTIATIONS AND MANAGEMENT IN CHINA

The modern business development of China began during 1978 and during the last decades Chinese have created one of the most dynamic and strongest economies in the world. China is now second largest trading power calculated in dollars. The special characteristic of this economic development is that it is not copy of any existing economy, instead the developments have been strongly influenced by the Chinese cultural characteristics. One cultural characteristic, guanxi, which is a “network of services and counter- services” is argued to be major component of successful business in China where these changes of services happen between people but also between companies. Obtaining introductions and the guanxi when doing business in China will give attentive audience and security for companies business. Despite the evidenced importance of guanxi, China´s business environment is rapidly changing towards Western economies, which might then reduce the importance of guanxi. Therefore the current impact of guanxi is a important topic to study. The main purpose of this study is to explore the impact of guanxi for Western big and small sized multinational companies´ business processes when doing business in China. This study looks What is the impact of guanxi in contemporary Chinese business environment for foreign companies doing business in China. Sub-questions in this research focus on what is the impact of guanxi on corporate reputation, management and negotiations. Findings present a mixed view where the importance of guanxi is not anymore critical, especially among younger people in the cities, however guanxi was clearly important outside the cities and when dealing with government officials. Efficient use of guanxi can be extremely profitable especially during early stages of business operations and guanxi plays role when bargaining prices and ensuring product quality from the factories. Therefore guanxi should be considered as essential element for successful business in China.

Intellectual Property Protection in China in the Cases of Outsourcing and own Manufacturing

The intellectual property (IP) environment in China is still very immature. There are several problems in legal, political, economic, social-cultural, competitive and labor environment which have hindered IP legal enforcement. Under such circumstances, IP misappropriation is a major concern especially for foreign small and medium-sized enterprises (SMEs) doing business in China. These circumstances require foreign companies, no matter whether they are multinational corporations (MNCs) or SMEs and have own manufacturing in China or not, to take strong IP actions. Therefore, the purpose of this study is to discuss how IP can be protected in China in the case of outsourcing and in the case of own manufacturing. The comparison will consider the process of outsourcing and own manufacturing consisting two stages: preparation stage and operation stage. In order to clarify the conceptual arguments, two illustrative case studies were studied. The case data bases on two semi-structured interviews of the managing directors, field notes and archival data. The findings propose that attention in IP protection should be given to following issues: integrating IP strategy into the company’s business strategy, protecting the most critical knowledge, regarding IP steps as a whole in the protection mechanism and making IP strategy as proactive as possible. The major difference between outsourcing and own manufacturing in IP protection is in the operation stage. Besides, the findings also provide managerial advice on IP protection, e.g. foreign managers should be prepared for IP risks in China, they should establish an own IP protection mechanism which matches the company’s situation and they should consider IP protection as an on-going process.

Finnish cleantech SMEs in China: Challenges and solutions

The rapid economic growth in China has resulted in environmental challenges ranging from air pollution to water-related issues. Thus supporting clean technology, or cleantech, that encompasses industries that focus on alternative energy, pollution and recycling, power supplies and conservation has become one of the focal points in the Chinese economic policy for the next decade. Simultaneously, the Finnish government has initiated programs to support the internationalisation of domestic cleantech companies in an attempt to spiral the industry into one of the pillars of Finnish economic growth. This study concentrates on the conjunction of these two themes and studies the challenges faced by Finnish cleantech SMEs in the Chinese market. Consequently, the study answers the following sub questions: 1. What human and financial resource-based challenges do Finnish cleantech SMEs face in the Chinese market and what are their solutions? 2. What knowledge-based challenges do Finnish cleantech SMEs face in the Chinese market and how can these difficulties be resolved? 3. What network-based challenges do Finnish cleantech SMEs face in the Chinese market, how do they relate to the resource- and knowledge-based challenges, and how can these difficulties be resolved? This qualitative study is conducted by analysing four semi structured interviews collected from four Finnish SMEs that operate in China. The findings of the study indicate that in human resources the most important challenges are related to the hiring and retaining of employees. In contrast to extant academic literature results distinguish salary and social status as the main solutions to this challenge. Regarding financial resources it is discovered that cleantech companies enjoy a benign business environment in China and benefit from the Chinese government’s support for cleantech industry. Challenges related to knowledge resources can be grouped into categories with the most interesting knowledge flows being the stream of local market knowledge into to the foreign parent company and the outward flow of manufacturing and business practice information into the target venture. The challenge related to the first flow is gathering relevant information and the main solutions are clustering at the foreign location and hiring knowledge prior to internationalisation. Regarding the second flow the main challenge is related to intellectual property rights and the most interesting solution is the purposeful transformation of explicit knowledge into tacit knowledge. Finally, it is discovered that networks, called guanxi in China, greatly affect the business processes. Within the guanxi system there is the concept of face which was found to affect employee propensity to stay as well as, as a novel academic result, employees’ knowledge sharing intention.

Waste-to-Energy Scenarios in the China Context

Waste incineration plants are increasingly established in China. A low heating value and high moisture content, due to a large proportion of biowaste in the municipal solid waste (MSW), can be regarded as typical characteristics of Chinese MSW. Two incineration technologies have been mainly established in China: stoker grate and circular fluidized bed (CFB). Both of them are designed to incinerate mixed MSW. However, there have been difficulties to reach the sufficient temperature in the combustion process due to the low heating value of the MSW. That is contributed to the usage of an auxiliary fossil fuel, which is often used during the whole incineration process. The objective of this study was to design alternative Waste-to-energy (WTE) scenarios for existing WTE plants with the aim to improve the material and energy efficiency as well as the feasibility of the plants. Moreover, the aim of this thesis was to find the key factors that affect to the feasibility of the scenarios. Five different WTE plants were selected as study targets. The necessary data for calculation was gained from literature as well as received from the operators of the target WTE plants. The created scenarios were based on mechanical-biological treatment (MBT) technologies, in which the produced solid recovered fuel (SRF) was fed as an auxiliary fuel into a WTE plant replacing the fossil fuel. The mechanically separated biowaste was treated either in an anaerobic digestion (AD) plant, a biodrying plant, a thermal drying plant, or a combined AD plant + thermal drying plant. An interactive excel spreadsheet based computation tool was designed to estimate the viability of the scenarios in different WTE cases. The key figures of the improved material and energy efficiency, such as additional electricity generated and avoided waste for landfill, were got as results. Furthermore, economic indicators such as annual profits (or costs), payback period, and internal rate of return (IRR) were gained as results. The results show that the AD scenario was the most profitable in most of the cases. The current heating value of MSW and the tipping fee for the received MSW appeared as the most important factor in terms of feasibility.

Entrepreneurial orientation in small and medium-sized enterprises during economic crisis

The economic importance of small and medium-sized enterprises (SMEs) and entrepreneurship has increased significantly in recent decades and entrepreneurial activity and SMEs are deemed vital to economic progress. Therefore, it is justifiable to study how small firms and entrepreneurs can enhance their performance and emergence in the turbulent economic environment. The concept of entrepreneurial orientation (EO) has recently attracted considerable attention in the field of entrepreneurship research. EO generally refers to a firm’s propensity to be innovative, to be proactive and to take risks. A majority of EO studies so far have found that adopting EO associated entrepreneurial behaviors will help firms to create or sustain a high level of performance. This dissertation explores the main drivers and performance implications of EO for SMEs in time of economic crisis. Hence the first objective of this dissertation is to examine the performance implications of EO and to test the role of EO on how firms are treated by the crisis at operative level. The second objective is to expand the prevailing understanding of determinants of EO by exploring the relationship between owner's work related values, attitudes, demographic characteristics, firm’s financial resources and EO. EO was found to be a significant and positive factor behind a firm’s long run growth. Hence it can be said that EO has positive implications for firm performance. But on the other hand, during a time of economic crisis the different dimensions of EO had both positive and negative effects on performance of SMEs. The performance implications varied across different stages of the crisis and were also dependent on what measure was used for measuring the performance. The main drivers of EO in SMEs were the personal work related values of the entrepreneur and his/her prior experience as an entrepreneur. The intrinsic work values related to interest, responsibility, challenge, self-development or intellectual stimulation and values related to status, power, achievement and recognition had a positive effect on the level of EO. On the other hand, extrinsic values related to high income, material possessions, benefits such as generous holidays, job security, and comfort through good working conditions decreased the level of EO

Russia, China, India Foresight for Small and Medium size Enterprises in Uusimaa : Changes forecast in the Russian, Chinese and Indian operating environments from the viewpoint of small and middle-sized enterprises in Uusimaa

The report describes those factors of the future that are related to the growth and needs of Russia, China, and India and that may provide significant internationalisation potential for Uusimaa companies. The report examines the emerging trends and market-entry challenges for each country separately. Additionally, it evaluates the training needs of Uusimaa companies in terms of the current offerings available for education on topics related to Russia, China, and India. The report was created via the Delphi method: experts were interviewed, and both Trendwiki material and the latest literature were used to create a summary of experts’ views, statements, and reasons behind recent developments. This summary of views was sent back to the experts with the objective of reaching consensus synthesising the differing views or, at least, of providing argumentation for the various alternative lines of development. In addition to a number of outside experts and business leaders, all heads of Finpro’s Finland Trade Centers participated in the initial interviews. The summary was commented upon by all Finpro consultants and analysts for Russia, China, and India, with each focusing on his or her own area of expertise. The literature used consisted of reports, listed for each country, and an extensive selection of the most recent newspaper articles. The report was created in January-April 2010. On 22 April 2010 its results were reviewed at the final report presentation in cooperation with the Uusimaa ELY Centre.

Towards sustainable Iron- and steelmaking with economic optimization

The iron and steelmaking industry is among the major contributors to the anthropogenic emissions of carbon dioxide in the world. The rising levels of CO2 in the atmosphere and the global concern about the greenhouse effect and climate change have brought about considerable investigations on how to reduce the energy intensity and CO2 emissions of this industrial sector. In this thesis the problem is tackled by mathematical modeling and optimization using three different approaches. The possibility to use biomass in the integrated steel plant, particularly as an auxiliary reductant in the blast furnace, is investigated. By pre-processing the biomass its heating value and carbon content can be increased at the same time as the oxygen content is decreased. As the compression strength of the preprocessed biomass is lower than that of coke, it is not suitable for replacing a major part of the coke in the blast furnace burden. Therefore the biomass is assumed to be injected at the tuyere level of the blast furnace. Carbon capture and storage is, nowadays, mostly associated with power plants but it can also be used to reduce the CO2 emissions of an integrated steel plant. In the case of a blast furnace, the effect of CCS can be further increased by recycling the carbon dioxide stripped top gas back into the process. However, this affects the economy of the integrated steel plant, as the amount of top gases available, e.g., for power and heat production is decreased. High quality raw materials are a prerequisite for smooth blast furnace operation. High quality coal is especially needed to produce coke with sufficient properties to ensure proper gas permeability and smooth burden descent. Lower quality coals as well as natural gas, which some countries have in great volumes, can be utilized with various direct and smelting reduction processes. The DRI produced with a direct reduction process can be utilized as a feed material for blast furnace, basic oxygen furnace or electric arc furnace. The liquid hot metal from a smelting reduction process can in turn be used in basic oxygen furnace or electric arc furnace. The unit sizes and investment costs of an alternative ironmaking process are also lower than those of a blast furnace. In this study, the economy of an integrated steel plant is investigated by simulation and optimization. The studied system consists of linearly described unit processes from coke plant to steel making units, with a more detailed thermodynamical model of the blast furnace. The results from the blast furnace operation with biomass injection revealed the importance of proper pre-processing of the raw biomass as the composition of the biomass as well as the heating value and the yield are all affected by the pyrolysis temperature. As for recycling of CO2 stripped blast furnace top gas, substantial reductions in the emission rates are achieved if the stripped CO2 can be stored. However, the optimal recycling degree together with other operation conditions is heavily dependent on the cost structure of CO2 emissions and stripping/storage. The economical feasibility related to the use of DRI in the blast furnace depends on the price ratio between the DRI pellets and the BF pellets. The high amount of energy needed in the rotary hearth furnace to reduce the iron ore leads to increased CO2 emissions.

European luxury brands made in China: the effect of low-cost country manufacturing on brand image and purchase decisions

European luxury brands have an image of manufacturing their products in the same country where the brands originate. However, in the past years many luxury brands have shifted their manufacturing to countries outside Europe. China is now a common manufacturing country for European luxury brands despite the country’s poor image as a manufacturer. Chinese manufacturing is often associated with bad quality, bad labour conditions, mass production, and counterfeits. The image of China does not quite match the image luxury brands enjoy including characteristics such as high end quality, craftsmanship, details, design, or premium price. A negatively perceived country-of-manufacture may have an effect on a brand’s image and consumers’ purchase decisions. This thesis is focused on European luxury brands manufacturing in China, and how this effects the brand image and purchase decisions among luxury consumers. The empirical part of this thesis is based on focus group research, which is a popular method in the field of qualitative research. The main focus group is female luxury consumers in Finland. This main group has been divided into three categories: 1) the university students, 2) the young career women, 3) the experienced luxury consumers. This categorization has been done based on their different stages in luxury consumption. All in all, the empirical research consisted of 11 interviews and 29 participants. The main contribution of this thesis was that there is a difference between the opinions of the younger groups (university students and young career women) and the experienced luxury consumers when discussing the effect of country-of-manufacture on brand image and purchase decisions of luxury brands. The younger participants thought that manufacturing luxury products in China might affect the brand image, but their purchase decisions would not be that much affected by the country-of-origin. The experienced luxury consumers had quite a different view on the country-of-origin of luxury brands – they found it an important decisive factor prior making purchases. The majority of experienced luxury consumers would not buy luxury products made in China, and they would always check where these products are made in.

Language of the Future, Language of the PRC –Representations of Putonghua in South China Morning Post

As the national language of the PRC, the world's growing economic power and the sovereign of Hong Kong, Putonghua is a language with multiple facets of relevance for the current Special Administrative Region. This paper seeks to explore and explain different representations of Putonghua in Hong Kong's leading English-language newspaper South China Morning Post in articles published between January 2012 and February 2013. The representations are studied in the context of the different discourses in which they appear, some of which feature language(s) as a central theme and some more marginally. An overview is first presented of the scholarly research on the most important developments in Hong Kong's complex language scene from the beginnings of the colony until present day, with the aim of detecting developments and attitudes with potential relevance or parallels to the context of Putonghua today. The paper then reflects on the media and its role in producing and perpetuating discourses in the society, before turning to more practical considerations on Hong Kong's English and Chinese language media and the role of South China Morning Post in it. The methods used in analysing the discourses are those of discourse analysis, with textual analysis as its starting point, in which close attention is paid to linguistic forms as the concrete representations of meanings in a text. Particularly the immediate contexts of the appearances of the word “Putonghua” in the articles were studied carefully to detect vocabulary, grammar and semantical choices as signs of different discourses, potentially also revealing fundamental underlying assumptions and other “hidden meanings” in the text. Some of the most distinctive discourses in which different representations of Putonghua appeared were the Instrumental value for the individual (in which Putonghua was represented as a form of social capital); Othering of the mainlanders (in which Putonghua served as a concrete marker of distinction); Belonging to China (Putonghua as a symbol of unity); and Cultural distinctiveness of Hong Kong (Putonghua as a threat to Hong Kong's history and culture, as embodied in Cantonese). Some of these discourses were more prominent than others, and for example the discourse of Belonging to China was relatively rarely enacted in Hongkongers' voices. In general, the findings were not surprising in the light of the history, but showed a fair degree of consistency with what has been written earlier about the languages and attitudes towards them in Hong Kong. It has often been noted that Putonghua and its relation with Cantonese is a matter linked with the social identity of the colony and its citizens. While it appeared that there were no strict taboos in the representations of Putonghua in the societal context, the possibility of self-censorship cannot be ruled out as a factor toning down political discourses in the representations.

China regnum : in China auem habent mira dexteritate hero suopices venatem ...

Julkaisussa: Speculum orbis terrae. Vol I

Assessment of techno-economic use cases for small-scale island grids

The main objective of the study was to define the methodology for assessing the limits for application island grids instead of interconnecting with existing grid infrastructure. The model for simulation of grid extension distance and levelised cost of electricity has been developed and validated by the case study in Finland. Thereafter, sensitivities of the application limits were examined with the respect to operational environment, load conditions, supply security and geographical location. Finally, recommendations for the small-scale rural electrification projects in the market economy environment have been proposed.

Research on the quality of the wine grapes in corridor area of China

The corridor area of Gansu Province is one of the most important wine grape growing regions in China, and this strip of land results in a significant difference in terms of terroir between its regions. Chemical composition and antioxidant capacity of the main wine grape varieties (Vitis vinifera L.) cultivated in the corridor area of Gansu Province in northwest China were compared. Three regions (Zhangye, Wuwei, and Jiayuguan) were selected to explain the influence of soil and climate conditions on the quality of wine grapes. This study aims to investigate the effect of different regions on berry composition and antioxidant capacity, providing a general evaluation of red and white wine grapes quality in the corridor area of China. The results showed that ‘Merlot’ grapes grown in Zhangye had the best quality among the different varieties in the three regions of Gansu evaluated. The moderate temperature and nitrogen deficiency were associated with improved fruit quality. It was identified that the most suitable grape variety from Zhangye is ‘Merlot’, and that ‘Cabernet Sauvignon’ and ‘Italian Resling’ are the most suitable varieties from Wuwei and Jiayuguan, respectively.

Use of airborne laser scanner data in demanding forest conditions

Most of the applications of airborne laser scanner data to forestry require that the point cloud be normalized, i.e., each point represents height from the ground instead of elevation. To normalize the point cloud, a digital terrain model (DTM), which is derived from the ground returns in the point cloud, is employed. Unfortunately, extracting accurate DTMs from airborne laser scanner data is a challenging task, especially in tropical forests where the canopy is normally very thick (partially closed), leading to a situation in which only a limited number of laser pulses reach the ground. Therefore, robust algorithms for extracting accurate DTMs in low-ground-point-densitysituations are needed in order to realize the full potential of airborne laser scanner data to forestry. The objective of this thesis is to develop algorithms for processing airborne laser scanner data in order to: (1) extract DTMs in demanding forest conditions (complex terrain and low number of ground points) for applications in forestry; (2) estimate canopy base height (CBH) for forest fire behavior modeling; and (3) assess the robustness of LiDAR-based high-resolution biomass estimation models against different field plot designs. Here, the aim is to find out if field plot data gathered by professional foresters can be combined with field plot data gathered by professionally trained community foresters and used in LiDAR-based high-resolution biomass estimation modeling without affecting prediction performance. The question of interest in this case is whether or not the local forest communities can achieve the level technical proficiency required for accurate forest monitoring. The algorithms for extracting DTMs from LiDAR point clouds presented in this thesis address the challenges of extracting DTMs in low-ground-point situations and in complex terrain while the algorithm for CBH estimation addresses the challenge of variations in the distribution of points in the LiDAR point cloud caused by things like variations in tree species and season of data acquisition. These algorithms are adaptive (with respect to point cloud characteristics) and exhibit a high degree of tolerance to variations in the density and distribution of points in the LiDAR point cloud. Results of comparison with existing DTM extraction algorithms showed that DTM extraction algorithms proposed in this thesis performed better with respect to accuracy of estimating tree heights from airborne laser scanner data. On the other hand, the proposed DTM extraction algorithms, being mostly based on trend surface interpolation, can not retain small artifacts in the terrain (e.g., bumps, small hills and depressions). Therefore, the DTMs generated by these algorithms are only suitable for forestry applications where the primary objective is to estimate tree heights from normalized airborne laser scanner data. On the other hand, the algorithm for estimating CBH proposed in this thesis is based on the idea of moving voxel in which gaps (openings in the canopy) which act as fuel breaks are located and their height is estimated. Test results showed a slight improvement in CBH estimation accuracy over existing CBH estimation methods which are based on height percentiles in the airborne laser scanner data. However, being based on the idea of moving voxel, this algorithm has one main advantage over existing CBH estimation methods in the context of forest fire modeling: it has great potential in providing information about vertical fuel continuity. This information can be used to create vertical fuel continuity maps which can provide more realistic information on the risk of crown fires compared to CBH.

A China como um duplo pólo na economia mundial e a recentralização da economia asiática

China as a double pole in the world economy and the recentralization of the Asian economy. The extraordinary growth of Chinese trade that occurred in the last years changed China’s role on world and regional economy. As a major producer of industrial consumer goods to OCDE countries, China has negatively affected many Asian competitors but as an expansive market China became the main source of growth to Asian countries. This new dimension was achieved after the Asian crisis of 1997 by an economic expansion led by public investment. After considering the Chinese balance of payment position and its industrial strategy this paper investigates this double dimension of China on trade and its influence on Asian countries.