Morphogenetic and structural characteristics of guinea grass tillers at different ages under intermittent stocking

The objective of this research was to assess morphogenetic and structural characteristics of tillers of guinea grass cv. Tanzania at different ages. The pastures of guinea grass were managed in six pasture conditions related to the combination of three frequencies (90, 95, and 99% light interception) and two post-grazing heights (25 and 50 cm). In these six pastures conditions, three tiller ages were evaluated (young, mature, and old). The design was of completely randomized block with three replications. Young tillers exhibited higher leaf appearance rate and leaf elongation rate and, consequently, higher final leaf length and number of live leaves than mature and old tillers, regardless of the pasture condition. On pastures managed with 90 or 95% light interception associated with a post-grazing height of 25 cm, old tillers presented longer leaf lifespan than young and mature ones. There is a progressive reduction in the vigor of growth of pastures of guinea grass cv. Tanzania with advancing tiller age.

Spectral characteristics of the hippocampal LFP during contextual fear conditioning

OBJECTIVE: The hippocampus has an important role in the acquisition and recall of aversive memories. The objective of this study was to investigate the relationship among hippocampal rhythms. METHODS: Microeletrodes arrays were implanted in the hippocampus of Wistar rats. The animals were trained and tested in a contextual fear conditioning task. The training consisted in applying shocks in the legs. The memory test was performed 1 day (recent memory) or 18 days (remote memory) after training. We proposed a measure based on the FFT power spectrum, denominated "delta-theta ratio", to characterize the different behaviors (active exploration and freezing) and the memories types. RESULTS: The delta-theta ratio was able to distinguish recent and remote memories. In this study, the ratio for the 18-day group was smaller than for the 1-day group. Moreover, this measure was useful to distinguish the different behavior states active exploration and freezing. CONCLUSIONS: The results suggest delta-theta oscillations could reflect the demands on information processing during recent and remote memory recalls.

Influence of HSM cutting parameters on the surface integrity characteristics of hardened AISI H13 steel

The purpose of this study is to evaluate the influence of the cutting parameters of high-speed machining milling on the characteristics of the surface integrity of hardened AISI H13 steel. High-speed machining has been used intensively in the mold and dies industry. The cutting parameters used as input variables were cutting speed (v c), depth of cut (a p), working engagement (a e) and feed per tooth (f z ), while the output variables were three-dimensional (3D) workpiece roughness parameters, surface and cross section microhardness, residual stress and white layer thickness. The subsurface layers were examined by scanning electron and optical microscopy. Cross section hardness was measured with an instrumented microhardness tester. Residual stress was measured by the X-ray diffraction method. From a statistical standpoint (the main effects of the input parameters were evaluated by analysis of variance), working engagement (a e) was the cutting parameter that exerted the strongest effect on most of the 3D roughness parameters. Feed per tooth (f z ) was the most important cutting parameter in cavity formation. Cutting speed (v c) and depth of cut (a p) did not significantly affect the 3D roughness parameters. Cutting speed showed the strongest influence on residual stress, while depth of cut exerted the strongest effect on the formation of white layer and on the increase in surface hardness.

Influence of the network modifier on the characteristics of MSnO3 (M=Sr and Ca) thin films synthesized by chemical solution deposition

CaSnO3 and SrSnO3 alkaline earth stannate thin films were prepared by chemical solution deposition using the polymeric precursor method on various single crystal substrates (R- and C-sapphire and 100-SrTiO3) at different temperatures. The films were characterized by X-ray diffraction (θ-2θ, ω- and φ-scans), field emission scanning electron microscopy, atomic force microscopy, micro-Raman spectroscopy and photoluminescence. Epitaxial SrSnO3 and CaSnO3 thin films were obtained on SrTiO3 with a high crystalline quality. The long-range symmetry promoted a short-range disorder which led to photoluminescence in the epitaxial films. In contrast, the films deposited on sapphire exhibited a random polycrystalline growth with no meaningful emission regardless of the substrate orientation. The network modifier (Ca or Sr) and the substrate (sapphire or SrTiO3) influenced the crystallization process and/or the microstructure. Higher is the tilts of the SnO6 octahedra, as in CaSnO3, higher is the crystallization temperature, which changed also the nucleation/grain growth process.

The Effect of Preservative Interventions on the Chemical- Physical and Structural Characteristics of Panel Painting

This work studies the impact of two traditional Romanian treatments, Red Petroleum and Propolis, in terms of real efficiency and consequence on the wooden artifacts. The application of these solutions is still a widely adopted and popular technique in preservative conservation but the impact of these solutions is not well known. It is important to know the effect of treatments on chemical-physical and structural characteristics of the artifacts, not only for understanding the influence on present conditions but also for foreseeing the future behavior. These treatments with Romanian traditional products are compared with a commercial antifungal product, Biotin R, which is utilized as reference to control the effectiveness of Red Petroleum and Propolis. Red Petroleum and Propolis are not active against mould while Biotin R is very active. Mould attack is mostly concentrated in the painted layer, where the tempera, containing glue and egg, enhance nutrition availability for moulds. Biotin R, even if is not a real insecticide but a fungicide, was the most active product against insect attack of the three products, followed by Red Petroleum, Propolis and untreated reference. As for colour, it did not change so much after the application of Red Petroleum and Biotin R and the colour difference was almost not perceptible. On the contrary, Propolis affected the colour a lot. During the exposure at different RH, the colour changes significantly at 100% RH at equilibrium and this is mainly due to the mould attack. Red Petroleum penetrates deeply into wood, while Propolis does not penetrate and remains only on the surface. However, Red Petroleum does not interact chemically with wood substance and it is easy volatilized in oven-dry condition. On the contrary Propolis interacts chemically with wood substance and hardly volatilized, even in oven-dry condition and consequently Propolis remains where it penetrated, mostly on the surface. Treatment by immersion has impact on wood physical parameters while treatment by brushing does not have significant impact. Especially Red Petroleum has an apparent impact on moisture content (MC) due to the penetration of solution, while Propolis does not penetrate so much and remains only on surface therefore Propolis does not have so much impact as Red Petroleum. However, if the weight of the solution penetrated in wood is eliminated, there is not significant difference in MC between treated and untreated samples. Considering physical parameters, dimensional stability is an important parameter. The variation of wood moisture content causes shrinkages/swelling of the wood that polychrome layer can only partially follow. The dimension of wooden supports varied under different moisture conditioning; the painted layer cannot completely follow this deformation, and consequently a degradation and deterioration caused by detachment, occurs. That detachment affects the polychrome stratification of the panel painting and eventually the connections between the different layer compositions of the panel painting.

Fundamental Dimensions of Social Judgment: Sociability and Morality as Distinct Characteristics of Social Warmth

The present dissertation focuses on the two basic dimensions of social judgment, i.e., warmth and competence. Previous research has shown that warmth and competence emerge as fundamental dimensions both at the interpersonal level and at the group level. Moreover, warmth judgments appear to be primary, reflecting the importance of first assessing others’ intentions before determining the other’s ability to carry out those intentions. Finally, it has been shown that warmth and competence judgments are predicted by perceived economic competition and status, respectively (for a review, see Cuddy, Fiske, & Glick, 2008). Building on this evidence, the present work intends to further explore the role of warmth and competence in social judgment, adopting a finer-grained level of analysis. Specifically, we consider warmth to be a dimension of evaluation that encompasses two distinct characteristics (i.e., sociability and morality) rather than as an undifferentiated dimension (see Leach, Ellemers, & Barreto, 2007). In a similar vein, both economic competition and symbolic competition are taken into account (see Stephan, Ybarra, & Morrison, 2009). In order to highlight the relevance of our empirical research, the first chapter reviews the literature in social psychology that has studied the warmth and competence dimensions. In the second chapter, across two studies, we examine the role of realistic and symbolic threats (akin economic and symbolic competition, respectively) in predicting the perception of sociability and morality of social groups. In study 1, we measure perceived realistic threat, symbolic threat, sociability, and morality with respect to 8 social groups. In study 2, we manipulate the level and type of threat of a fictitious group and measure perceived sociability and morality. The findings show that realistic threat and symbolic threat are differentially related to the sociability and morality components of warmth. Specifically, whereas realistic threat seems to be a stronger predictor of sociability than symbolic threat, symbolic threat emerges as better predictor of morality than realistic threat. Thus, extending prior research, we show that the types of threat are linked to different warmth stereotypes. In the third and the fourth chapter, we examine whether the sociability and morality components of warmth play distinct roles at different stages of group impression formation. More specifically, the third chapter focuses on the information-gathering process. Two studies experimentally investigate which traits are mostly selected when forming impressions about either ingroup or outgroup members. The results clearly show that perceivers are more interested in obtaining information about morality than about sociability when asked to form a global impression about others. The fourth chapter considers more properly the formulation of an evaluative impression. Thus, in the first study participants rate real groups on sociability, morality, and competence. In the second study, participants read an immigration scenario depicting an unfamiliar social group in terms of high (vs. low) morality, sociability, and competence. In both studies, participants are also asked to report their global impression of the group. The results show that global evaluations are better predicted by morality than by sociability and competence trait ascriptions. Taken together the third and the fourth chapters show that the dominance of warmth suggested by previous studies on impression formation might be better explained in terms of a greater effect of one of the two subcomponents (i.e., morality) over the other (i.e., sociability). In the general discussion, we discuss the relevance of our findings for intergroup relation and group perception, as well as for impression formation.