Aspects of leaf anatomy of kudzu (Pueraria lobata, Leguminosae-Faboideae) related to water and energy balance

Kudzu is a cover crop that has escaped cultivation in some subtropical and warm temperate regions. Kudzu has previously demonstrated broad intraspecific physiological plasticity while colonizing new environments. The objective of this paper was to investigate characteristics of kudzu leaflet anatomy that might contribute to its successful growth in climatically distinct environments, and to escape cultivation as well. Fresh and fixed leaflet strips of field-grown plants were analyzed. The lower epidermis of kudzu showed a higher frequency of stomata (147 ± 19 stomata mm-2) than the upper epidermis (26 ± 17 stomata mm-2). The average number of trichomes per square milimeter was 8 for both the upper and the lower epidermis. The average trichome length was 410 ± 200 mum for the upper epidermis and 460 ± 190 mum for the lower epidermis. Cuticle thickness was not considerably different between lower and upper epidermis. The leaflet blade consisted basically of two layers (upper and lower) of unicellular epidermis, two layers of palisade parenchyma and one layer of spongy parenchyma. One layer of paraveinal mesophyll was found between palisade and spongy parenchyma. In conclusion, leaflets of kudzu present anatomical characteristics that might contribute to the broad physiological plasticity shown by kudzu.

Radiation and energy balance of lettuce culture inside a polyethylene greenhouse

The objective of this paper was to describe the radiation and energy balance, during the lettuce (Lactuca sativa, L. cv. Verônica) crop cycle inside a polyethylene greenhouse. The radiation and energy balance was made inside a tunnel greenhouse with polyethylene cover (100 mum) and in an external area, both areas with 35 m². Global, reflected and net radiation, soil heat flux and air temperature (dry and humid) were measured during the crop cycle. A Datalogger, which operated at 1 Hz frequency, storing 5 minutes averages was utilized. The global (K¯) and reflected (K­) radiations showed that the average transmission of global radiation (K¯in / K¯ex) was almost constant, near to 79.59%, while the average ratio of reflected radiation (K­in / K­ex) was 69.21% with 8.47% standard-deviation. The normalized curves of short-wave net radiation, in relation to the global radiation (K*/ K¯), found for both environments, were almost constant at the beginning of cycle; this relation decreased in the final stage of culture. The normalized relation (Rn/ K¯) was bigger in the external area, about 12%, when the green culture covered the soil surface. The long-wave radiation balance average (L*) was bigger outside, about 50%. The energy balance, estimated in terms of vertical fluxes, showed that, for the external area, in average, 83.07% of total net radiation was converted in latent heat evaporation (LE), and 18% in soil heat flux (G), and 9.96% in sensible heat (H), while inside of the greenhouse, 58.71% of total net radiation was converted in LE, 42.68% in H, and 28.79% in G.

Controle de Rhyzopertha dominica pela atmosfera controlada com CO2, em trigo

A utilização de gases inertes como fumigantes no controle de pragas é uma alternativa ao uso de fosfina. O objetivo deste trabalho foi avaliar a eficiência de uma atmosfera com CO2 no controle de Rhyzoperta dominica (Fabr.) (Coleoptera: Bostrichidae) em grãos de trigo armazenado. O trabalho constou de cinco concentrações de CO2 (0, 30 , 40, 50 e 60%, completadas com N2), três períodos de exposição (5, 10, 15 dias), três populações de R. dominica (Fabr.) (Coleoptera: Bostrichidae) (Campo Mourão, PR, Sete Lagoas, MG e Santa Rosa, RS) e sete fases de desenvolvimento do inseto (ovo, larva de 1º, 2º, 3º e 4º ínstar, pupa e adulto) com três repetições. As diferentes fases da R. dominica foram acondicionadas em tecido organza e levadas para câmaras de expurgo de 200 litros com 75% deste volume repletos de grãos. As câmaras foram vedadas com borracha de silicone para garantir a hermeticidade. Após a vedação das câmaras injetavam-se os gases contendo diferentes teores de CO2. Os resultados mostraram que todos os teores de CO2 causaram 100% de mortalidade de adultos das três populações nos três períodos de exposição utilizados. Em pupas a mortalidade atingiu 100% no teor de 60% de CO2 para as três populações no período de 15 dias de exposição; porém, todos os teores de CO2 utilizados no período de 15 dias de exposição causaram 100% de mortalidade das pupas da população de Santa Rosa. Para o adequado controle de larvas de diferentes ínstares são necessários teores de CO2 iguais ou acima de 50%. Nos períodos de 10 e 15 dias de exposição, todos os teores de CO2 causaram 100% de mortalidade dos ovos das três populações avaliadas.

Adaptacion al medio y transformacion artesanal: balance actual de las investigaciones acerca del alfar medieval de Cabrera d'Anoia

Las investigaciones sobre Cabrera d"Anoia (Barcelona) han avanzado de forma considerable en los últimos años. La caracterización de los materiales y el estudio de la documentación arqueológica han logrado definir un particular sistema de producción de cerámica que se desarrolla en un marco rupestre de dimensiones limitadas. Una situación que obliga a la modificación continua del área de trabajo en beneficio de las actividades productivas. Este artículo analiza ese proceso de adaptación y transformación permanente del espacio artesanal a partir de los datos proporcionados por el yacimiento. Se trata, en consecuencia, de esbozar un primer balance de los resultados más recientes tras 20 años de investigación sobre este alfar.

Smart instrumentation for determination of ligament stiffness and ligament balance in total knee arthroplasty.

Ligament balance is an important and subjective task performed during total knee arthroplasty (TKA) procedure. For this reason, it is desirable to develop instruments to quantitatively assess the soft-tissue balance since excessive imbalance can accelerate prosthesis wear and lead to early surgical revision. The instrumented distractor proposed in this study can assist surgeons on performing ligament balance by measuring the distraction gap and applied load. Also the device allows the determination of the ligament stiffness which can contribute a better understanding of the intrinsic mechanical behavior of the knee joint. Instrumentation of the device involved the use of hall-sensors for measuring the distractor displacement and strain gauges to transduce the force. The sensors were calibrated and tested to demonstrate their suitability for surgical use. Results show the distraction gap can be measured reliably with 0.1mm accuracy and the distractive loads could be assessed with an accuracy in the range of 4N. These characteristics are consistent with those have been proposed, in this work, for a device that could assist on performing ligament balance while permitting surgeons evaluation based on his experience. Preliminary results from in vitro tests were in accordance with expected stiffness values for medial collateral ligament (MCL) and lateral collateral ligament (LCL).

Aplicaciones del laser de CO2 en odontologia

La incorporación de las nuevas tecnologías en las ciencias de la salud es, hoy en día, una realidad, ante la cual los profesionales sanitarios deben estar preparados. La tecnología láser ofrece numerosas ventajas en casi la totalidad de las especialidades odontológicas. De la amplia gama de láseres disponibles, el láser de CO2 destaca por sus aplicaciones en el ámbito de la cirugía bucal, especialmente en la cirugía de los tejidos blandos, aunque su uso también ha sido estudiado en otras disciplinas como la odontología conservadora y la endodoncia. Su uso no está exento de riesgos, y el odontólogo especializado en cirugía bucal debe poseer los conocimientos y las habilidades pertinentes para su utilización. Las características del láser de CO2 permiten una cirugía rápida y cómoda para el profesional y unas molestias postoperatorias mínimas para el paciente.

Adaptacion al medio y transformacion artesanal: balance actual de las investigaciones acerca del alfar medieval de Cabrera d'Anoia

Las investigaciones sobre Cabrera d"Anoia (Barcelona) han avanzado de forma considerable en los últimos años. La caracterización de los materiales y el estudio de la documentación arqueológica han logrado definir un particular sistema de producción de cerámica que se desarrolla en un marco rupestre de dimensiones limitadas. Una situación que obliga a la modificación continua del área de trabajo en beneficio de las actividades productivas. Este artículo analiza ese proceso de adaptación y transformación permanente del espacio artesanal a partir de los datos proporcionados por el yacimiento. Se trata, en consecuencia, de esbozar un primer balance de los resultados más recientes tras 20 años de investigación sobre este alfar.

Origin of CO2 and carbonate veins in mantle-derived xenoliths in the Pannonian Basin

The origin and evolution of CO2 inclusions and calcite veins in peridotite xenoliths of the Pannonian Basin, Hungary, were investigated by means of petrographic investigation and stable isotope analyses. The fluid inclusions recovered in paragenetic olivine and clinopyroxene belong to distinct populations: type A (texturally early) inclusions with regular shapes (often with negative crystal forms) forming intragranular trails, type B (texturally late) inclusions defining randomly oriented trails that reach grain boundaries Type B inclusions are often associated with silicate melt (type C) inclusions Stable carbon isotope compositions in inclusion-hosted CO2 were obtained by vacuum crushing followed by conventional dual inlet as well as continuous flow mass spectrometry in order to eliminate possible lab artifacts. Olivines, clino- and orthopyroxenes of the host peridotite have oxygen isotope compositions from 5.3 to 6.0 parts per thousand (relative to V-SMOW). without any relationship with xenolith texture. Some of the xenoliths contained calcite in various forms veins and infillings in silicate globules in veins, secondary carbonate veins filling cracks and metasomatic veins with diffuse margins The former two carbonate types have delta C-13 values around -13 parts per thousand (relative to V-PDB) and low Sr contents (<05 wt %), whereas the third type,veins with high-temperature metasomatic features have a delta C-13 value of -5 0 parts per thousand and high Sr contents up to 34 wt.% In spite of the mantle-like delta C-13 value and the unusually high Sr content typical for mantle-derived carbonate, trace element compositions have proven a crustal origin. This observation supports the conclusions of earlier studies that the carbonate melt droplets found on peridotite xenoliths in the alkaline basalts represent mobilized sedimentary carbonate. The large delta C-13 range and the C-12-enrichment in the carbonates can be attributed to devolanlization of the migrating carbonate or infiltration of surficial fluids containing C-12-rich dissolved carbon Carbon isotope compositions of inclusion-hosted CO2 range from -17 8 to -4.8 parts per thousand (relative to V-PDB) with no relation to the amount of CO2 released by vacuum crushing. Low-delta C-13 values measured by stepwise heating under vacuum suggest that the carbon component is pristine and not related to surficial contamination, and that primary mantle fluids with delta C-13 values around -5 parts per thousand were at least partly preserved in the xenoliths Tectonic reworking and heating by the basaltic magma resulted in partial CO2 release and local C-13-depletion. (C) 2010 Elsevier B V All rights reserved

Empirics of the international inequality in CO2 emissions intensity: explanatory factors according to complementary decomposition methodologies

This paper analyses the international inequalities in CO2 emissions intensity for the period 1971–2009 and assesses explanatory factors. Multiplicative, group and additive methodologies of inequality decomposition are employed. The first allows us to clarify the separated role of the carbonisation index and the energy intensity in the pattern observed for inequalities in CO2 intensities; the second allows us to understand the role of regional groups; and the third allows us to investigate the role of different fossil energy sources (coal, oil and gas). The results show that, first, the reduction in global emissions intensity has coincided with a significant reduction in international inequality. Second, the bulk of this inequality and its reduction are attributed to differences between the groups of countries considered. Third, coal is the main energy source explaining these inequalities, although the growth in the relative contribution of gas is also remarkable. Fourth, the bulk of inequalities between countries and its decline are explained by differences in energy intensities, although there are significant differences in the patterns demonstrated by different groups of countries. JEL codes: D39; Q43; Q56. Key words: CO2 international distribution, inequality decomposition, CO2 emissions intensity

How Wages and Employment Adjust to Trade Liberalization: Quasi-Experimental Evidence from Austria

We study the response of regional employment and nominal wages to trade liberalization, exploiting the natural experiment provided by the opening of Central and Eastern European markets after the fall of the Iron Curtain in 1990. Using data for Austrian municipalities, we examine di¤erential pre- and post-1990 wage and employment growth rates between regions bordering the formerly communist economies and interior regions. If the 'border regions'are de...ned narrowly, within a band of less than 50 kilometers, we can identify statistically signi...cant liberalization e¤ects on both employment and wages. While wages responded earlier than employment, the employment e¤ect over the entire adjustment period is estimated to be around three times as large as the wage e¤ect. The implied slope of the regional labor supply curve can be replicated in an economic geography model that features obstacles to labor migration due to immobile housing and to heterogeneous locational preferences.

Four essays on economic geography, trade and development

RESUME Cette thèse se situe à la frontière de la recherche en économie du développement et du commerce international et vise à intégrer les apports de l'économie géographique. Le premier chapitre s'intéresse aux effets de création et de détournement de commerce au sein des accords régionaux entre pays en développement et combine une approche gravitaire et une estimation non paramétrique des effets de commerce. Cette analyse confirme un effet de commerce non monotone pour six accords régionaux couvrant l'Afrique, l'Amérique Latine et l'Asie (AFTA, CAN, CACM, CEDEAO, MERCO SUR et SADC) sur la période 1960-1996. Les accords signés dans les années 90 (AFTA, CAN, MERCOSUR et SADC) semblent avoir induis une amélioration du bien-être de leurs membres mais avec un impact variable sur le reste du monde, tandis que les accords plus anciens (CEDEAO et CACM) semblent montrer que les effets de commerce et de bien-être se réduisent pour finir par s'annuler à mesure que le nombre d'années de participation des Etats membres augmente. Le deuxième chapitre pose la question de l'impact de la géographie sur les échanges Sud-Sud. Ce chapitre innove par rapport aux méthodes classiques d'estimation en dérivant une équation de commerce à partir de l'hypothèse d'Armington et en intégrant une fonction de coût de transport qui prend en compte la spécificité des pays de l'UEMOA. Les estimations donnent des effets convaincants quant au rôle de l'enclavement et des infrastructures: deux pays enclavés de l'UEMOA commercent 92% moins que deux autres pays quelconques, tandis que traverser un pays de transit au sein de l'espace UEMOA augmente de 6% les coûts de transport, et que bitumer toutes les routes inter-Etat de l'Union induirait trois fois plus de commerce intra-UEMOA. Le chapitre 3 s'intéresse à la persistance des différences de développement au sein des accords régionaux entre pays en développement. Il montre que la géographie différenciée des pays du Sud membres d'un accord induit un impact asymétrique de celui-ci sur ses membres. Il s'agit d'un modèle stylisé de trois pays dont deux ayant conclu un accord régional. Les résultats obtenus par simulation montrent qu'une meilleure dotation en infrastructure d'un membre de l'accord régional lui permet d'attirer une plus grande part industrielle à mesure que les coûts de transport au sein de l'accord régional sont baissés, ce qui conduit à un développement inégal entre les membres. Si les niveaux d'infrastructure domestique de transport sont harmonisés au sein des pays membres de l'accord d'intégration, leurs parts industrielles peuvent converger au détriment des pays restés hors de l'union. Le chapitre 4 s'intéresse à des questions d'économie urbaine en étudiant comment l'interaction entre rendements croissants et coûts de transport détermine la localisation des activités et des travailleurs au sein d'un pays ou d'une région. Le modèle développé reproduit un fait stylisé observé à l'intérieur des centres métropolitains des USA: sur une période longue (1850-1990), on observe une spécialisation croissante des centres urbains et de leurs périphéries associée à une évolution croissante puis décroissante de la population des centres urbains par rapport à leurs périphéries. Ce résultat peut se transférer dans un contexte en développement avec une zone centrale et une zone périphérique: à mesure que l'accessibilité des régions s'améliore, ces régions se spécialiseront et la région principale, d'abord plus importante (en termes de nombre de travailleurs) va finir par se réduire à une taille identique à celle de la région périphérique.

Balance nutricional y número de hojas como variables de predicción del rendimiento del plátano Hartón

El objetivo de este trabajo fue desarrollar una ecuación de regresión que permitiese estimar el rendimiento (Y) del plátano Hartón (Musa AAB subgrupo plátano cv. Hartón), con la relación entre el Índice de Balance de Nutrientes DRIS (IBN-DRIS) (X1) y el número de hojas de la planta madre (X2). Usando un muestreo completamente al azar, se colectaron 398 muestras de tejido foliar. Se obtuvo la ecuación: Y = 30,351** - 8,644** log X1 + 0,27502*X2, con R² de 0,6206***, con distribución normal de los residuos. Pudo demostrarse que con la misma se puede predecir el rendimiento potencial de cualquier plantación del plátano Hartón en el área de estudio.