Impact of insecticide resistance on the field control of Aedes aegypti in the State of São Paulo

IntroductionThe need to control dengue transmission by means of insecticides has led to the development of resistance to most of the products used worldwide against mosquitoes. In the State of São Paulo, the Superintendência de Controle de Endemias(SUCEN) has annually monitored the susceptibility of Aedes aegypti to insecticides since 1996; since 1999, surveys were conducted in collaboration with the National Network of Laboratories (MoReNAa Network) and were coordinated by the Ministry of Health. In this study, in addition to the biological characterization of insecticide resistance in the laboratory, the impact of resistance on field control was evaluated for vector populations that showed resistance in laboratory assays.MethodsField efficacy tests with larvicides and adulticides were performed over a 13-year period, using World Health Organization protocols.ResultsData from the field tests showed a reduction in the residual effect of temephos on populations with a resistance ratio of 3. For adults, field control was less effective in populations characterized as resistant in laboratory qualitative assays, and this was confirmed using qualitative assays and field evaluation.ConclusionsOur results indicated that management of resistance development needs to be adopted when insect populations show reduced susceptibility. The use of insecticides is a self-limiting tool that needs to be applied cautiously, and dengue control requires more sustainable strategies.

Potential for entomopathogenic fungi to control Triatoma dimidiata (Hemiptera: Reduviidae), a vector of Chagas disease in Mexico

Introduction The use of entomopathogenic fungi to control disease vectors has become relevant because traditional chemical control methods have caused damage to the environment and led to the development of resistance among vectors. Thus, this study assessed the pathogenicity of entomopathogenic fungi in Triatoma dimidiata. Methods Preparations of 108 conidia/ml of Gliocladium virens, Talaromyces flavus, Beauveria bassiana and Metarhizium anisopliae were applied topically on T. dimidiata nymphs and adults. Controls were treated with the 0.0001% Tween-80 vehicle. Mortality was evaluated and recorded daily for 30 days. The concentration required to kill 50% of T. dimidiata (LC50) was then calculated for the most pathogenic isolate. Results Pathogenicity in adults was similar among B. bassiana, G. virens and T. flavus (p>0.05) and differed from that in triatomine nymphs (p=0.009). The most entomopathogenic strains in adult triatomines were B. bassiana and G. virens, which both caused 100% mortality. In nymphs, the most entomopathogenic strain was B. bassiana, followed by G. virens. The native strain with the highest pathogenicity was G. virens, for which the LC50 for T. dimidiata nymphs was 1.98 x108 conidia/ml at 13 days after inoculation. Conclusions Beauveria bassiana and G. virens showed entomopathogenic potential in T. dimidiata nymphs and adults. However, the native G. virens strain presents a higher probability of success in the field, and G. virens should thus be considered a potential candidate for the biological control of triatomine Chagas disease vectors.

Avaliação económica em transplantação renal : abordagem estratégica do processo de doação e análise de custo-utilidade do programa de transplantação renal versus hemodiálise

SUMÁRIO - O desafio atual da Saúde Pública é assegurar a sustentabilidade financeira do sistema de saúde. Em ambiente de recursos escassos, as análises económicas aplicadas à prestação dos cuidados de saúde são um contributo para a tomada de decisão que visa a maximização do bem-estar social sujeita a restrição orçamental. Portugal é um país com 10,6 milhões de habitantes (2011) com uma incidência e prevalência elevadas de doença renal crónica estadio 5 (DRC5), respetivamente, 234 doentes por milhão de habitantes (pmh) e 1.600 doentes/pmh. O crescimento de doenças associadas às causas de DRC, nomeadamente, diabetes Mellitus e hipertensão arterial, antecipam uma tendência para o aumento do número de doentes. Em 2011, dos 17.553 doentes em tratamento substitutivo renal, 59% encontrava-se em programa de hemodiálise (Hd) em centros de diálise extra-hospitalares, 37% viviam com um enxerto renal funcionante e 4% estavam em diálise peritoneal (SPN, 2011). A lista ativa para transplante (Tx) renal registava 2.500 doentes (SPN 2009). O Tx renal é a melhor modalidade terapêutica pela melhoria da sobrevida, qualidade de vida e relação custo-efetividade, mas a elegibilidade para Tx e a oferta de órgãos condicionam esta opção. Esta investigação desenvolveu-se em duas vertentes: i) determinar o rácio custo-utilidade incremental do Tx renal comparado com a Hd; ii) avaliar a capacidade máxima de dadores de cadáver em Portugal, as características e as causas de morte dos dadores potenciais a nível nacional, por hospital e por Gabinete Coordenador de Colheita e Transplantação (GCCT), e analisar o desempenho da rede de colheita de órgãos para Tx. Realizou-se um estudo observacional/não interventivo, prospetivo e analítico que incidiu sobre uma coorte de doentes em Hd que foi submetida a Tx renal. O tempo de seguimento mínimo foi de um ano e máximo de três anos. No início do estudo, colheram-se dados sociodemográficos e clínicos em 386 doentes em Hd, elegíveis para Tx renal. A qualidade de vida relacionada com a saúde (QVRS) foi avaliada nos doentes em Hd (tempo 0) e nos transplantados, aos três, seis, 12 meses, e depois, anualmente. Incluíram-se os doentes que por falência do enxerto renal transitaram para Hd. Na sua medição, utilizou-se um instrumento baseado em preferências da população, o EuroQol-5D, que permite o posterior cálculo dos QALY. Num grupo de 82 doentes, a QVRS em Hd foi avaliada em dois tempos de resposta o que permitiu a análise da sua evolução. Realizou-se uma análise custo-utilidade do Tx renal comparado com a Hd na perspetiva da sociedade. Identificaram-se os custos diretos, médicos e não médicos, e as alterações de produtividade em Hd e Tx renal. Incluíram-se os custos da colheita de órgãos, seleção dos candidatos a Tx renal e follow-up dos dadores vivos. Cada doente transplantado foi utilizado como controle de si próprio em diálise. Avaliou-se o custo médio anual em programa de Hd crónica relativo ao ano anterior à Tx renal. Os custos do Tx foram avaliados prospetivamente. Considerou-se como horizonte temporal o ciclo de vida nas duas modalidades. Usaram-se taxas de atualização de 0%, 3% e 5% na atualização dos custos e QALY e efetuaram-se análises de sensibilidade one way. Entre 2008 e 2010, 65 doentes foram submetidos a Tx renal. Registaram-se, prospetivamente, os resultados em saúde incluíndo os internamentos e os efeitos adversos da imunossupressão, e o consumo dos recursos em saúde. Utilizaram-se modelos de medidas repetidas na avaliação da evolução da QVRS e modelos de regressão múltipla na análise da associação da QVRS e dos custos do transplante com as características basais dos doentes e os eventos clínicos. Comparativamente à Hd, observou-se melhoria da utilidade ao 3º mês de Tx e a qualidade de vida aferida pela escala EQ-VAS melhorou em todos os tempos de observação após o Tx renal. O custo médio da Hd foi de 32.567,57€, considerado uniforme ao longo do tempo. O custo médio do Tx renal foi de 60.210,09€ no 1º ano e 12.956,77€ nos anos seguintes. O rácio custo-utilidade do Tx renal vs Hd crónica foi de 2.004,75€/QALY. A partir de uma sobrevivência do enxerto de dois anos e cinco meses, o Tx associou-se a poupança dos custos. Utilizaram-se os dados nacionais dos Grupos de Diagnóstico Homogéneos e realizou-se um estudo retrospectivo que abrangeu as mortes ocorridas em 34 hospitais com colheita de órgãos, em 2006. Considerou-se como dador potencial o indivíduo com idade entre 1-70 anos cuja morte ocorrera a nível hospitalar, e que apresentasse critérios de adequação à doação de rim. Analisou-se a associação dos dadores potenciais com características populacionais e hospitalares. O desempenho das organizações de colheita de órgãos foi avaliado pela taxa de conversão (rácio entre os dadores potenciais e efetivos) e pelo número de dadores potenciais por milhão de habitantes a nível nacional, regional e por Gabinete Coordenador de Colheita e Transplantação (GCCT). Identificaram-se 3.838 dadores potenciais dos quais 608 apresentaram códigos da Classificação Internacional de Doenças, 9.ª Revisão, Modificações Clínicas (CID- 9-MC) que, com maior frequência, evoluem para a morte cerebral. O modelo logit para dados agrupados identificou a idade, o rácio da lotação em Unidades de Cuidados Intensivos e lotação de agudos, existência de GCCT e de Unidade de Transplantação, e mortalidade por acidente de trabalho como fatores preditivos da conversão dum dador potencial em efetivo e através das estimativas do modelo logit quantificou-se a probabilidade dessa conversão. A doação de órgãos deve ser assumida como uma prioridade e as autoridades em saúde devem assegurar o financiamento dos hospitais com programas de doação, evitando o desperdício de órgãos para transplantação, enquanto um bem público e escasso. A colheita de órgãos deve ser considerada uma opção estratégica da atividade hospitalar orientada para a organização e planeamento de serviços que maximizem a conversão de dadores potenciais em efetivos incluindo esse critério como medida de qualidade e efetividade do desempenho hospitalar. Os resultados deste estudo demonstram que: 1) o Tx renal proporciona ganhos em saúde, aumento da sobrevida e qualidade de vida, e poupança de custos; 2) em Portugal, a taxa máxima de eficácia da conversão dos dadores cadavéricos em dadores potenciais está longe de ser atingida. O investimento na rede de colheita de órgãos para Tx é essencial para assegurar a sustentabilidade financeira e promover a qualidade, eficiência e equidade dos cuidados em saúde prestados na DRC5.

Compaction quality control on site of earthworks - A comparative study

The capacity to use geologic materials (soil and rock) that are available in the surrounding environment is inherent to the human civilization and has contributed to the evolution of societies throughout the course of history. The use of these materials in the construction of structures such as houses, roads, railways or dams, stirred the improvement of socioeconomic and environmental conditions. Several reports of structural problems on embankments can be found throughout history. A considerable number of those registers can be linked to inadequate compaction, demonstrating the importance of guaranteeing a suitable quality of soil compaction. Various methodologies and specifications of compaction quality control on site of earthworks, based on the fill moisture content and dry unit weight, were developed during the 20th century. Two widely known methodologies are the conventional and nuclear techniques. The conventional methods are based on the use of the field sand cone test (or similar) and sampling of material for laboratory-based testing to evaluate the fill dry unit weight and water content. The nuclear techniques measure both parameters in the field using a nuclear density gauge. A topic under discussion in the geotechnical community, namely in Portugal, is the comparison between the accuracy of the nuclear gauge and sand cone test results for assessing the compaction and density ratio of earth fills, particularly for dams. The main purpose of this dissertation is to compare both of them. The data used were acquired during the compaction quality control operations at the Coutada/Tamujais dam trial embankment and core construction. This is a 25 m high earth dam located in Vila Velha de Rodão, Portugal. To analyse the spatial distribution of the compaction parameters (water content and compaction ratio), a 3D model was also developed. The main results achieved are discussed and finally some considerations are put forward on the suitability of both techniques to ensure fill compaction quality and on additional research to complement the conclusions obtained.

Estudo do controlo motor via Sincronias entre sinais de EEG e de EMG / Motor control study through sincrony between EEG and EMG signals

Um dos maiores desafios da neurofisiologia é o de compreender a forma como a informação é transmitida através do sistema nervoso. O estudo do sistema nervoso tem várias aplicações, tanto na neurologia, permitindo avanços ao nível clínico, como noutras áreas, e.g., nos sistemas de processamento de informação baseados em redes neuronais. A transmissão de informação entre neurónios é feita por via de sinais elétricos. A compreensão deste fenómeno é ainda incompleta e há projectos a nível europeu e mundial com o objetivo de modular o sistema nervoso no seu todo de forma a melhor o compreender. Uma das teses que se desenvolve hoje em dia é a de que a transmissão de sinais elétricos no sistema nervoso é influenciada por fenómenos de sincronia. O objetivo desta dissertação é o de otimizar um protocolo de aquisição e análise de dados reais de eletroencefalograma e eletromiograma com o propósito de observar fenómenos de sincronia, baseando-se num algoritmo (análise por referência de fase, ou RPA, do inglês reference phase analysis) que deteta sincronias de fase entre os sinais de eletroencefalograma (EEG) e um sinal de referência, que é, no caso presente, o eletromiograma (EMG). A otimização deste protocolo e sua validação indicaram a existência de fenómenos significativos de sincronia no sinal elétrico, transmitido entre os músculos da mão e o córtex motor, no decorrer da ação motora.

Theranostic applications of phage display to control leishmaniasis: selection of biomarkers for serodiagnostics, vaccination, and immunotherapy

AbstractPhage display is a high-throughput subtractive proteomic technology used for the generation and screening of large peptide and antibody libraries. It is based on the selection of phage-fused surface-exposed peptides that recognize specific ligands and demonstrate desired functionality for diagnostic and therapeutic purposes. Phage display has provided unmatched tools for controlling viral, bacterial, fungal, and parasitic infections, and allowed identification of new therapeutic targets to treat cancer, metabolic diseases, and other chronic conditions. This review presents recent advancements in serodiagnostics and prevention of leishmaniasis -an important tropical parasitic disease- achieved using phage display for the identification of novel antigens with improved sensitivity and specificity. Our focus is on theranostics of visceral leishmaniasis with the aim to develop biomarker candidates exhibiting both diagnostic and therapeutic potential to fight this important, yet neglected, tropical disease.

Control of a white organic light emitting diode’s emission parameters using a single doped RGB active layer

White Color tuning is an attractive feature that Organic Light Emitting Diodes (OLEDs) offer. Up until now, there hasn’t been any report that mix both color tuning abilities with device stability. In this work, White OLEDs (W-OLEDs) based on a single RGB blend composed of a blue emitting N,N′-Di(1-naphthyl)-N,N′-diphenyl-(1,1′-biphenyl)-4,4′-diamine (NPB) doped with a green emitting Coumarin-153 and a red emitting 4-(Dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM1) dyes were produced. The final device structure was ITO/Blend/Bathocuproine (BCP)/ Tris(8-hydroxyquinolinato)aluminium (Alq3)/Al with an emission area of 0.25 cm2. The effects of the changing in DCM1’s concentration (from 0.5% to 1% wt.) allowed a tuning in the final white color resulting in devices capable of emitting a wide range of tunes – from cool to warm – while also keeping a low device complexity and a high stabilitty. Moreover, an explanation on the optoelectrical behavior of the device is presented. The best electroluminescense (EL) points toward 160 cd/m2 of brightness and 1.1 cd/A of efficiency, both prompted to being enhanced. An Impedance Spectroscopy (IS) analysis allowed to study both the effects of BCP as a Hole Blocking Layer and as an aging probe of the device. Finally, as a proof of concept, the emission was increased 9 and 64 times proving this structure can be effectively applied for general lighting.

Universal banks and corporate control: Evidence from the global syndicated loan market

We investigate the effects of bank control over borrower firms whether by representation on boards of directors or by the holding of shares through bank asset management divisions. Using a large sample of syndicated loans, we find that banks are more likely to act as lead arrangers in loans when they exert some control over the borrower firm. Bank-firm governance links are associated with higher loan spreads during the 2003-2006 credit boom, but lower spreads during the 2007-2008 financial crisis. Additionally, these links mitigate credit rationing effects during the crisis. The results are robust to several methods to correct for the endogeneity of the bank- firm governance link. Our evidence, consistent with intertemporal smoothing of loan rates, suggests there are costs and benefits from banks’ involvement in firm governance.

Development of process control strategies exploiting knowledge from systems biology: application to MDCK suspension cells

Madine Darby Canine Kidney (MDCK) cell lines have been extensively evaluated for their potential as host cells for influenza vaccine production. Recent studies allowed the cultivation of these cells in a fully defined medium and in suspension. However, reaching high cell densities in animal cell cultures still remains a challenge. To address this shortcoming, a combined methodology allied with knowledge from systems biology was reported to study the impact of the cell environment on the flux distribution. An optimization of the medium composition was proposed for both a batch and a continuous system in order to reach higher cell densities. To obtain insight into the metabolic activity of these cells, a detailed metabolic model previously developed by Wahl A. et. al was used. The experimental data of four cultivations of MDCK suspension cells, grown under different conditions and used in this work came from the Max Planck Institute, Magdeburg, Germany. Classical metabolic flux analysis (MFA) was used to estimate the intracellular flux distribution of each cultivation and then combined with partial least squares (PLS) method to establish a link between the estimated metabolic state and the cell environment. The validation of the MFA model was made and its consistency checked. The resulted PLS model explained almost 70% of the variance present in the flux distribution. The medium optimization for the continuous system and for the batch system resulted in higher biomass growth rates than the ones obtained experimentally, 0.034 h-1 and 0.030 h-1, respectively, thus reducing in almost 10 hours the duplication time. Additionally, the optimal medium obtained for the continuous system almost did not consider pyruvate. Overall the proposed methodology seems to be effective and both proposed medium optimizations seem to be promising to reach high cell densities.

A historical overview of leprosy epidemiology and control activities in Amazonas, Brazil

Leprosy is an ancient infectious disease caused by Mycobacterium leprae. According to comparative genomics studies, this disease originated in Eastern Africa or the Near East and spread with successive human migrations. The Europeans and North Africans introduced leprosy into West Africa and the Americas within the past 500 years. In Brazil, this disease arrived with the colonizers who disembarked at the first colonies, Rio de Janeiro, Salvador and Recife, at the end of the sixteenth century, after which it was spread to the other states. In 1854, the first leprosy cases were identified in State of Amazonas in the north of Brazil. The increasing number of leprosy cases and the need for treatment and disease control led to the creation of places to isolate patients, known as leprosaria. One of them, Colonia Antônio Aleixo was built in Amazonas in 1956 according to the most advanced recommendations for isolation at that time and was deactivated in 1979. The history of the Alfredo da Matta Center (AMC), which was the first leprosy dispensary created in 1955, parallels the history of leprosy in the state. Over the years, the AMC has become one of the best training centers for leprosy, general dermatology and sexually transmitted diseases in Brazil. In addition to being responsible for leprosy control programs in the state, the AMC has carried out training programs on leprosy diagnosis and treatment for health professionals in Manaus and other municipalities of the state, aiming to increase the coverage of leprosy control activities. This paper provides a historical overview of leprosy in State of Amazonas, which is an endemic state in Brazil.

Control in distribution networks with demand side management

The way in which electricity networks operate is going through a period of significant change. Renewable generation technologies are having a growing presence and increasing penetrations of generation that are being connected at distribution level. Unfortunately, a renewable energy source is most of the time intermittent and needs to be forecasted. Current trends in Smart grids foresee the accommodation of a variety of distributed generation sources including intermittent renewable sources. It is also expected that smart grids will include demand management resources, widespread communications and control technologies required to use demand response are needed to help the maintenance in supply-demand balance in electricity systems. Consequently, smart household appliances with controllable loads will be likely a common presence in our homes. Thus, new control techniques are requested to manage the loads and achieve all the potential energy present in intermittent energy sources. This thesis is focused on the development of a demand side management control method in a distributed network, aiming the creation of greater flexibility in demand and better ease the integration of renewable technologies. In particular, this work presents a novel multi-agent model-based predictive control method to manage distributed energy systems from the demand side, in presence of limited energy sources with fluctuating output and with energy storage in house-hold or car batteries. Specifically, here is presented a solution for thermal comfort which manages a limited shared energy resource via a demand side management perspective, using an integrated approach which also involves a power price auction and an appliance loads allocation scheme. The control is applied individually to a set of Thermal Control Areas, demand units, where the objective is to minimize the energy usage and not exceed the limited and shared energy resource, while simultaneously indoor temperatures are maintained within a comfort frame. Thermal Control Areas are overall thermodynamically connected in the distributed environment and also coupled by energy related constraints. The energy split is performed based on a fixed sequential order established from a previous completed auction wherein the bids are made by each Thermal Control Area, acting as demand side management agents, based on the daily energy price. The developed solutions are explained with algorithms and are applied to different scenarios, being the results explanatory of the benefits of the proposed approaches.

Medium access control design for distributed opportunistic radio networks

Existing wireless networks are characterized by a fixed spectrum assignment policy. However, the scarcity of available spectrum and its inefficient usage demands for a new communication paradigm to exploit the existing spectrum opportunistically. Future Cognitive Radio (CR) devices should be able to sense unoccupied spectrum and will allow the deployment of real opportunistic networks. Still, traditional Physical (PHY) and Medium Access Control (MAC) protocols are not suitable for this new type of networks because they are optimized to operate over fixed assigned frequency bands. Therefore, novel PHY-MAC cross-layer protocols should be developed to cope with the specific features of opportunistic networks. This thesis is mainly focused on the design and evaluation of MAC protocols for Decentralized Cognitive Radio Networks (DCRNs). It starts with a characterization of the spectrum sensing framework based on the Energy-Based Sensing (EBS) technique considering multiple scenarios. Then, guided by the sensing results obtained by the aforementioned technique, we present two novel decentralized CR MAC schemes: the first one designed to operate in single-channel scenarios and the second one to be used in multichannel scenarios. Analytical models for the network goodput, packet service time and individual transmission probability are derived and used to compute the performance of both protocols. Simulation results assess the accuracy of the analytical models as well as the benefits of the proposed CR MAC schemes.

Determinant factors to merger control decisions in Portugal

The present paper aims to investigate the determinant factors of Portuguese merger control. Our sample comprises 652 M&A cases occurred between January of 2003 and September of 2015. Through a probit model we have tested the relevance of product and geographic market, entry barriers, type of concentration, merger effects, year of decision and the President of the Competition Authority at the time. The results suggests that the conglomerate and vertical effects, the existence of barriers to entry as well as the number of regulatory agencies listened are the main explanatory variables to determine a need for an in-depth investigation and to make a final decision. According to the evidence, cases cleared at Phase 1 are increasing over time. The number of prohibited mergers is close to zero.

Harvest control rule vs optimal harvesting of an age-structured population: The case of the Ibero-Atlantic Sardine Fishery

Research Masters

FPGA field oriented control of an axial flux motor-in-wheel

This paper presents the design and the prototype implementation of a three-phase power inverter developed to drive a motor-in-wheel. The control system is implemented in a FPGA (Field Programmable Gate Array) device. The paper describes the Field Oriented Control (FOC) algorithm and the Space Vector Modulation (SVM) technique that were implemented. The control platform uses a Spartan-3E FPGA board, programmed with Verilog language. Simulation and experimental results are presented to validate the developed system operation under different load conditions. Finally are presented conclusions based on the experimental results.