Multi-objective design and optimisation of bypass outlet-guide vanes

This paper describes the development of an automated design optimization system that makes use of a high fidelity Reynolds-Averaged CFD analysis procedure to minimize the fan forcing and fan BOGV (bypass outlet guide vane) losses simultaneously taking into the account the down-stream pylon and RDF (radial drive fairing) distortions. The design space consists of the OGV's stagger angle, trailing-edge recambering, axial and circumferential positions leading to a variable pitch optimum design. An advanced optimization system called SOFT (Smart Optimisation for Turbomachinery) was used to integrate a number of pre-processor, simulation and in-house grid generation codes and postprocessor programs. A number of multi-objective, multi-point optimiztion were carried out by SOFT on a cluster of workstations and are reported herein.

Design and commissioning of a 30kw direct drive wave generator

The Trident Energy TE5 is a prototype wave energy converter operating on the principle of having direct-drive linear generators mounted above the water surface, coupled to floats moving under the rig deck. This paper describes aspects of the TE5 design, including its generators, power electronic systems and the conception of its marine structure.

Parallel twin-body trawl for shrimps, its design and efficiency

Comparative studies with a new 17 m parallel twin-body trawl and a 17 m bulged belly trawl conducted off Cochin during 1974-77 are reported. The parallel twin body trawl showed an increase of 28% in catch over that of bulged belly with a break up of 39.9% and 23.1 % for prawns and fishes respectively. The increase in catch is attributed to the extra wide mouth opening (26.6 %) of the parallel twin-body trawl. Parallel twin-body trawl had 8.96% lesser resistance which resulted in lower utilization of horse power.

Preliminary observations in the design and operation of a three panel, double trawl net

Fishing operations were conducted off Kakinada using a 3 panel double trawl net with twin cod-ends to study the utility of the net in catching both bottom and off bottom fishes. The observations indicate that the net is effective in simultaneous catching of bottom as well as off-bottom fishes and separating them while in operation. The design details of the net and the particulars of the fishing operations conducted are presented.

Shore seines for reservoirs - Part 1 - Design and performance

Based on the studies to introduce active gears in reservoirs, a prototype shore seine was designed and tested, the details of which are presented in this communication. The results revealed that the operation of this gear could effectively control the proliferation of under-exploited species.

Studies on the probable sources of fungal infection and the control measures in a fish seed farm

The causes of mortality of fry of cultivable fishes in a fish seed farm were investigated. The mortality was due to fungal infection and the pathogen was Saprolegnia sp. The sources of infection were unhygienic breeding hapas, spawnery hapas in the cemented ponds, hatching jars and excess feeding. Application of one kg slaked lime followed by 75g of CuSo sub(4)(l-0.5 p.p.m.) and 150g of KMno sub(4)(2-1 p.p.m.) per each nursery (158m³ water) controlled the pathogen.

Security considerations in the design and peering of RFID discovery services

There is growing interest in Discovery Services for locating RFID and supply chain data between companies globally, to obtain product lifecycle information for individual objects. Discovery Services are heralded as a means to find serial-level data from previously unknown parties, however more realistically they provide a means to reduce the communications load on the information services, the network and the requesting client application. Attempts to design a standardised Discovery Service will not succeed unless security is considered in every aspect of the design. In this paper we clearly show that security cannot be bolted-on in the form of access control, although this is also required. The basic communication model of the Discovery Service critically affects who shares what data with whom, and what level of trust is required between the interacting parties. © 2009 IEEE.

Design and process selection for joints in flexible materials

The application of high performance textiles has grown significantly in the last 10 to 15 years. Various research groups throughout the United Kingdom, such as the Department of Trade and Industry, have identified technical textiles as a field for future development. There is little design guidance for joining of flexible materials or general property models that can be applied to theses materials. This lack is due to the large diversity of properties, structures and resulting behaviours of the materials that are classified as "Flexible Materials". This dissertation explores the issues that are involved in characterising the materials at the fibre, bulk and textile levels. Different units of measurement are used for each stage of the manufacturing process of flexible materials and this disparity creates problems when trying to make general comparisons (e.g. comparing textiles to polymer films). Thus, a possible solution to this is to create selection charts that allow designers to compare the strength of materials for a given mass per unit area. A design tool was created using the Cambridge Engineering Selector (CES) software to enable the selection of joining processes for material. The tool is effective in selecting a reduced number of viable joining processes. Through case studies it was shown that designers are required to examine the selected processes (identified by the software) in greater detail - in particular the economics and geometry of the joint - in order to identify the optimum joining process.