Development of error correction techniques for nitrate-N load estimation models

Excess nutrient loads carried by streams and rivers are a great concern for environmental resource managers. In agricultural regions, excess loads are transported downstream to receiving water bodies, potentially causing algal blooms, which could lead to numerous ecological problems. To better understand nutrient load transport, and to develop appropriate water management plans, it is important to have accurate estimates of annual nutrient loads. This study used a Monte Carlo sub-sampling method and error-corrected statistical models to estimate annual nitrate-N loads from two watersheds in central Illinois. The performance of three load estimation methods (the seven-parameter log-linear model, the ratio estimator, and the flow-weighted averaging estimator) applied at one-, two-, four-, six-, and eight-week sampling frequencies were compared. Five error correction techniques; the existing composite method, and four new error correction techniques developed in this study; were applied to each combination of sampling frequency and load estimation method. On average, the most accurate error reduction technique, (proportional rectangular) resulted in 15% and 30% more accurate load estimates when compared to the most accurate uncorrected load estimation method (ratio estimator) for the two watersheds. Using error correction methods, it is possible to design more cost-effective monitoring plans by achieving the same load estimation accuracy with fewer observations. Finally, the optimum combinations of monitoring threshold and sampling frequency that minimizes the number of samples required to achieve specified levels of accuracy in load estimation were determined. For one- to three-weeks sampling frequencies, combined threshold/fixed-interval monitoring approaches produced the best outcomes, while fixed-interval-only approaches produced the most accurate results for four- to eight-weeks sampling frequencies.

Variational ensemble Kalman filtering applied to data assimilation problems in computational fluid dynamics

One challenge on data assimilation (DA) methods is how the error covariance for the model state is computed. Ensemble methods have been proposed for producing error covariance estimates, as error is propagated in time using the non-linear model. Variational methods, on the other hand, use the concepts of control theory, whereby the state estimate is optimized from both the background and the measurements. Numerical optimization schemes are applied which solve the problem of memory storage and huge matrix inversion needed by classical Kalman filter methods. Variational Ensemble Kalman filter (VEnKF), as a method inspired the Variational Kalman Filter (VKF), enjoys the benefits from both ensemble methods and variational methods. It avoids filter inbreeding problems which emerge when the ensemble spread underestimates the true error covariance. In VEnKF this is tackled by resampling the ensemble every time measurements are available. One advantage of VEnKF over VKF is that it needs neither tangent linear code nor adjoint code. In this thesis, VEnKF has been applied to a two-dimensional shallow water model simulating a dam-break experiment. The model is a public code with water height measurements recorded in seven stations along the 21:2 m long 1:4 m wide flume’s mid-line. Because the data were too sparse to assimilate the 30 171 model state vector, we chose to interpolate the data both in time and in space. The results of the assimilation were compared with that of a pure simulation. We have found that the results revealed by the VEnKF were more realistic, without numerical artifacts present in the pure simulation. Creating a wrapper code for a model and DA scheme might be challenging, especially when the two were designed independently or are poorly documented. In this thesis we have presented a non-intrusive approach of coupling the model and a DA scheme. An external program is used to send and receive information between the model and DA procedure using files. The advantage of this method is that the model code changes needed are minimal, only a few lines which facilitate input and output. Apart from being simple to coupling, the approach can be employed even if the two were written in different programming languages, because the communication is not through code. The non-intrusive approach is made to accommodate parallel computing by just telling the control program to wait until all the processes have ended before the DA procedure is invoked. It is worth mentioning the overhead increase caused by the approach, as at every assimilation cycle both the model and the DA procedure have to be initialized. Nonetheless, the method can be an ideal approach for a benchmark platform in testing DA methods. The non-intrusive VEnKF has been applied to a multi-purpose hydrodynamic model COHERENS to assimilate Total Suspended Matter (TSM) in lake Säkylän Pyhäjärvi. The lake has an area of 154 km2 with an average depth of 5:4 m. Turbidity and chlorophyll-a concentrations from MERIS satellite images for 7 days between May 16 and July 6 2009 were available. The effect of the organic matter has been computationally eliminated to obtain TSM data. Because of computational demands from both COHERENS and VEnKF, we have chosen to use 1 km grid resolution. The results of the VEnKF have been compared with the measurements recorded at an automatic station located at the North-Western part of the lake. However, due to TSM data sparsity in both time and space, it could not be well matched. The use of multiple automatic stations with real time data is important to elude the time sparsity problem. With DA, this will help in better understanding the environmental hazard variables for instance. We have found that using a very high ensemble size does not necessarily improve the results, because there is a limit whereby additional ensemble members add very little to the performance. Successful implementation of the non-intrusive VEnKF and the ensemble size limit for performance leads to an emerging area of Reduced Order Modeling (ROM). To save computational resources, running full-blown model in ROM is avoided. When the ROM is applied with the non-intrusive DA approach, it might result in a cheaper algorithm that will relax computation challenges existing in the field of modelling and DA.

Concepções sobre as relações entre ciência, tecnologia, inovação e o desenvolvimento no Proem do Câmpus Cornélio Procópio da UTFPR

This dissertation deals with the conceptions of the relationship between science, technology, innovation, development and society. We aimed to analyze the ways to conceive these relations in documents of the Entrepreneurship and Innovation Programme (Proem) of the Federal Technological University of Paraná (UTFPR) and analyze the conceptions of these relations in view of managers and participants of the Program on Campus Cornélio Procópio, locus of research. It is recognized that the concepts of science, technology, innovation and development are polysemic, so varied are the definitions given by different theorists. For the research were characterized these conceptions into two streams, one called traditional or conservative current, which is supported by the classical theories, that is, those that were developed by authors recognized as classics, and the other current, referred to as critical concepts that sustains it are presented by authors recognized as critical, among which houses the Science studies, Technology and Society (CTS). This categorization buoyed analysis of Proem documents and analysis of the statements collected through interviews with three managers of Proem and eleven participants in the Program. As a result of the research, in general, although there is evidence in Proem documents of a social concern in relation to its role in society, it was observed that the program is based on the traditional and hegemonic view on the subject. In the documents analysis, it was noticed that the conceptions arranged CTS studies are present in relation to the multidimensional development concept. However, the texts analyzed, mostly were identified strong indications of thought supported by logical positivism, in propositions that refer to marketing issues, a proposal to generate an entrepreneurial culture guided by the development of technological innovations designed to meet and / or induce market demands, through production methods for popular goods. As for how managers and participants Proem in Campus Cornelius conceive the relationship between science, technology, innovation, development and society, also was identified closer to the classical view, although the respondents have pointed out many times in their speak apparent concern with social issues, like designing the development from a multidimensional view as cover critical studies CTS. The views of the participants, it was possible to link the strengthening of the concept connected to the linear model of development, in which the more it generates science, more is generated technology and more technology therefore produces more wealth, which in turn, the Schumpeterian view, is the basis of social welfare.

Individual and group antecedents of job satisfaction: a one-lab multilevel study

This study examines the simultaneous effect of individual (selfefficacy) and group variables (cohesion and gender diversity) on satisfaction. A laboratory study was conducted involving 373 college students randomly distributed across 79 small groups, who performed a laboratory task in about five hours. Two-level Hierarchical Linear Modeling (HLM) method was used. Results show the main effect from individual selfefficacy to satisfaction (both level 1), the cross-level effect from group cohesion (level 2) to individual satisfaction (level 1), and the interaction effect between self-efficacy and gender diversity to satisfaction. These results suggest that in a work group, satisfaction has a background in individual and group variables. Group cohesion and gender diversity have important effects on satisfaction. The article concludes with practical strategies and with limitations and suggestions for future research.

A comparison of the physiological demands of rugby union match-play when determined by absolute (ABS) or individual (IND) velocity bands in Global Positioning System (GPS) analysis

Since turning professional in 1995 there have been considerable advances in the research on the demands of rugby union, largely using Global Positioning System (GPS) analysis over the last 10 years. A systematic review on the use of GPS, particularly the setting of absolute (ABS) and individual (IND) velocity bands in field based, intermittent, high-intensity (HI) team sports was undertaken. From 3669 records identified, 38 studies were included for qualitative analysis. Little agreement on the definition of movement intensities within team sports was found, only three papers, all on rugby union, had used IND bands, with only one comparing ABS and IND methods. Thus, the aim of this study was to determine if there is a difference in the demands within positions when comparing ABS and IND methods for GPS analysis and if these differences are significantly different between the forward and back positional groups. A total of 214 data files were recorded from 26 players in 17 matches of the 2015/2016 Scottish BT Premiership. ABS velocity zones 1-7 were set at 1) 0-6, 2) 6.1-11, 3) 11.1-15, 4) 15.1-18, 5) 18.1-21, 6) 21.1-15 and 7) 25.1-40km.h-1 while IND zones 1-7 were 1) <20, 2) 20-40, 3) 40-50, 4) 50-70, 5) 70-80, 6) 80-95 and 7) 95-100% of player’s individually determined maximum velocity (Vmax). A 40m sprint test measured Vmax using OptaPro S4 10 Hz (catapult, Australia) GPS units to derive IND bands. The same GPS units were worn during matches. GPS outputs analysed were % distance, % time, high intensity efforts (HIEs) over 18.1 km.h-1 / 70% max velocity and repeated high intensity efforts (RHIEs) which consists of three HIEs in 21secs. General linear model (GLM) analysis identified a significant difference in the measurement of % total distance covered, between the ABS and IND methods in all zones for forwards (p<0.05) and backs (p<0.05). This difference was also significant between forwards and backs in zones 1, shown as mean difference ± standard deviation (3.7±0.7%), 6 (1.2±0.4%) and 7 (1.0±0.0%) respectively (p<0.05). Percentage time estimations were significantly different between ABS and IND analysis within forwards in zones 1 (1.7±1.7%), 2 (-2.9±1.3%), 3 (1.9±0.8%), 4 (-1.4±0.8%) and 5 (0.2±0.4%), and within backs in zones 1 (-10±1.5%), 2 (-1.2±1.1%), 3 (1.8±0.9%) and 5 (0.6±0.5%) (p<0.05). The difference between groups was significant in zones 1, 2, 4 and 5 (p<0.05). The number of HIEs was significantly different between forwards and backs in zones 6 (6±2) and 7 (3±2). RHIEs were significantly different between ABS and IND for forwards (1±2, p<0.05) although not between groups. Until more research on the differences in ABS and IND methods is carried out, then neither can be deemed a criterion method. In conclusion, there are significant differences between the ABS and IND methods of GPS analysis of the physical demands of rugby union, which must be considered when used to inform training load and recovery to improve performance and reduce injuries.

Klasseneffekte oder individuelle Einflussgrößen. Was bestimmt die Teilnahme am Instrumentallernen im Grundschulalter

In den vergangenen Jahren hat die Diskussion um kulturelle Teilhabe im Rahmen der Ergebnisse großer Bildungsstudien zugenommen. Diese hatten eine hochgradige Abhängigkeit des Bildungserfolgs und des Kompetenzerwerbs vom sozialen Hintergrund der Kinder und ihrer Familien konstatiert (u.a. Ehmke & Jude 2010, S. 250). Auch für den Teilaspekt der kulturellen Teilhabe ließen sich in Studien soziale Disparitäten feststellen: Die rezeptive Nutzung kultureller Angebote durch Kinder und Jugendliche unterliegt einer deutlichen sozialen Selektivität (Autorengruppe Bildungsberichterstattung 2012, S. 165). Gleichzeitig ist mit dem Programm Jedem Kind ein Instrument eine große Initiative zur Förderung frühen Instrumentallernens in der Grundschulzeit angelaufen. Die Initiatoren verfolgen dabei explizit das Ziel, die Kluft „zwischen kulturaffinen Elternhäusern und bildungsfernen Schichten" (Kulturstiftung des Bundes, 2012) in Bezug auf kulturelle Bildung zu verringern, eine „Grundversorgung" (ebd.) sicherzustellen und im demokratischen Sinne niemanden von der Alphabetisierung in Sachen Kunst auszuschließen (Völckers, 2007). Die Teilnahme von Kindern an Instrumentalunterricht während der Grundschulzeit wird hier also als ein Aspekt aktiver kultureller Teilhabe gedeutet und wird im Folgenden einer Analyse unterzogen. (DIPF/Orig.)

Perceived learning environments and metacognitive strategy knowledge at the upper secondary school level

There is evidence that students benefit from teachers’ explicit fostering of metacognitive strategy knowledge (MSK). However, there is insufficient understanding about the effect of implicit promotion of MSK in regular school instruction. This study investigates the relationship between perceived characteristics of learning environments (social climate, support, autonomy, self-reflection) and students’ MSK. A representative cohort of students (Nt1 = 1,272/Nt2 = 1,126) in Grades 10 and 11 at schools at the upper secondary education level (ISCED Level 3A) in Switzerland participated in this two-wave longitudinal study. Multilevel analysis showed effects on both the individual and the class level. Students who experienced higher social integration showed a higher extent of MSK at the beginning of the school year than students who experienced less social integration. Perceived autonomy was also positively related to students’ MSK on the individual level. In contrast, the results showed a negative relationship between perceived self-reflection and students’ MSK. On the class level, there was a negative relationship between self-reflection and students’ MSK. Teachers’ support did not correlate with students’ MSK on either the individual or the class level. Implications of these results for education and further studies are discussed. (DIPF/Orig.)

Differences by gender in barthel index change after stroke: a retrospective study in the Northeast Portugal

Foreseeing functional recovery after stroke plays a crucial role in planning rehabilitation programs. Objectives: To assess differences over time in functional recovery assessed through the Barthel Index (BI) rate of change (BIRC) between admission and discharge in stroke patients. Methods: This is a retrospective hospital-based study of consecutive patients with acute stroke admitted to a hospital in the Northeast Portugal between 2010 and 2014. BIRC was computed as the difference between the admission and discharge BI scores divided by time in days between these assessments. General linear model analysis stratiied by gender was used to know whether there was an increase in BIRC during time period under study. Adjusted regression coeficients and respective 95% conidence interval (95%CI) were obtained. Results: From 483 patients included in this analysis 59% (n = 285) were male. Among women, mean BIRC was 1.8 (± 1.88) units/ day in 2010 and reached 3.7 (± 2.80) units/day in 2014. Among men the mean BIRC in 2010 and in 2014 were similar being 3.2 (± 3.19) and 3.1 (± 3.31) units/day, respectively. After adjustment for age, BI at admission, type and laterality of stroke we observed an increase in BIRC over time among women such that mean BIRC in 2014 was 0.82 (95%: 0.48; 3.69) units higher than the one observed in 2010. No such increase in BIRC over time was observed among men. Conclusions: We observed an improvement in functional recovery after stroke but only among women. Our results suggest differences over time in clinical practice toward rehabilitation of women after stroke.

Outcome Prediction of Consciousness Disorders in the Acute Stage Based on a Complementary Motor Behavioural Tool.

INTRODUCTION: Attaining an accurate diagnosis in the acute phase for severely brain-damaged patients presenting Disorders of Consciousness (DOC) is crucial for prognostic validity; such a diagnosis determines further medical management, in terms of therapeutic choices and end-of-life decisions. However, DOC evaluation based on validated scales, such as the Revised Coma Recovery Scale (CRS-R), can lead to an underestimation of consciousness and to frequent misdiagnoses particularly in cases of cognitive motor dissociation due to other aetiologies. The purpose of this study is to determine the clinical signs that lead to a more accurate consciousness assessment allowing more reliable outcome prediction. METHODS: From the Unit of Acute Neurorehabilitation (University Hospital, Lausanne, Switzerland) between 2011 and 2014, we enrolled 33 DOC patients with a DOC diagnosis according to the CRS-R that had been established within 28 days of brain damage. The first CRS-R assessment established the initial diagnosis of Unresponsive Wakefulness Syndrome (UWS) in 20 patients and a Minimally Consciousness State (MCS) in the remaining13 patients. We clinically evaluated the patients over time using the CRS-R scale and concurrently from the beginning with complementary clinical items of a new observational Motor Behaviour Tool (MBT). Primary endpoint was outcome at unit discharge distinguishing two main classes of patients (DOC patients having emerged from DOC and those remaining in DOC) and 6 subclasses detailing the outcome of UWS and MCS patients, respectively. Based on CRS-R and MBT scores assessed separately and jointly, statistical testing was performed in the acute phase using a non-parametric Mann-Whitney U test; longitudinal CRS-R data were modelled with a Generalized Linear Model. RESULTS: Fifty-five per cent of the UWS patients and 77% of the MCS patients had emerged from DOC. First, statistical prediction of the first CRS-R scores did not permit outcome differentiation between classes; longitudinal regression modelling of the CRS-R data identified distinct outcome evolution, but not earlier than 19 days. Second, the MBT yielded a significant outcome predictability in the acute phase (p<0.02, sensitivity>0.81). Third, a statistical comparison of the CRS-R subscales weighted by MBT became significantly predictive for DOC outcome (p<0.02). DISCUSSION: The association of MBT and CRS-R scoring improves significantly the evaluation of consciousness and the predictability of outcome in the acute phase. Subtle motor behaviour assessment provides accurate insight into the amount and the content of consciousness even in the case of cognitive motor dissociation.

Produção de conhecimento científico e tecnológico nos Institutos Federais de Educação, Ciência e Tecnologia : uma investigação sobre a sua natureza e aplicação

Este artigo é um desdobramento da tese Produção de conhecimento científico e tecnológico nos Institutos Federais de Educação, Ciência e Tecnologia: uma investigação sobre a sua natureza, divulgação e aplicação.

Location analysis of city sections: socio-demographic segmentation and restaurant potentiality estimation : a case study of Lisbon

One of the objectives of this study is to perform classification of socio-demographic components for the level of city section in City of Lisbon. In order to accomplish suitable platform for the restaurant potentiality map, the socio-demographic components were selected to produce a map of spatial clusters in accordance to restaurant suitability. Consequently, the second objective is to obtain potentiality map in terms of underestimation and overestimation in number of restaurants. To the best of our knowledge there has not been found identical methodology for the estimation of restaurant potentiality. The results were achieved with combination of SOM (Self-Organized Map) which provides a segmentation map and GAM (Generalized Additive Model) with spatial component for restaurant potentiality. Final results indicate that the highest influence in restaurant potentiality is given to tourist sites, spatial autocorrelation in terms of neighboring restaurants (spatial component), and tax value, where lower importance is given to household with 1 or 2 members and employed population, respectively. In addition, an important conclusion is that the most attractive market sites have shown no change or moderate underestimation in terms of restaurants potentiality.

Parcellation of fMRI datasets with ICA and PLS: a data driven approach

Inter-subject parcellation of functional Magnetic Resonance Imaging (fMRI) data based on a standard General Linear Model (GLM) and spectral clustering was recently proposed as a means to alleviate the issues associated with spatial normalization in fMRI. However, for all its appeal, a GLM-based parcellation approach introduces its own biases, in the form of a priori knowledge about the shape of Hemodynamic Response Function (HRF) and task-related signal changes, or about the subject behaviour during the task. In this paper, we introduce a data-driven version of the spectral clustering parcellation, based on Independent Component Analysis (ICA) and Partial Least Squares (PLS) instead of the GLM. First, a number of independent components are automatically selected. Seed voxels are then obtained from the associated ICA maps and we compute the PLS latent variables between the fMRI signal of the seed voxels (which covers regional variations of the HRF) and the principal components of the signal across all voxels. Finally, we parcellate all subjects data with a spectral clustering of the PLS latent variables. We present results of the application of the proposed method on both single-subject and multi-subject fMRI datasets. Preliminary experimental results, evaluated with intra-parcel variance of GLM t-values and PLS derived t-values, indicate that this data-driven approach offers improvement in terms of parcellation accuracy over GLM based techniques.

Clustering of variables with a three-way approach for health sciences

© 2014 Cises This work is distributed with License Creative Commons Attribution-Non commercial-No derivatives 4.0 International (CC BY-BC-ND 4.0)

MODELING OF TRANSFER PATH FOR DETERMINATION OF COMBUSTION AND NOISE METRICS ON DIESEL ENGINES

Determination of combustion metrics for a diesel engine has the potential of providing feedback for closed-loop combustion phasing control to meet current and upcoming emission and fuel consumption regulations. This thesis focused on the estimation of combustion metrics including start of combustion (SOC), crank angle location of 50% cumulative heat release (CA50), peak pressure crank angle location (PPCL), and peak pressure amplitude (PPA), peak apparent heat release rate crank angle location (PACL), mean absolute pressure error (MAPE), and peak apparent heat release rate amplitude (PAA). In-cylinder pressure has been used in the laboratory as the primary mechanism for characterization of combustion rates and more recently in-cylinder pressure has been used in series production vehicles for feedback control. However, the intrusive measurement with the in-cylinder pressure sensor is expensive and requires special mounting process and engine structure modification. As an alternative method, this work investigated block mounted accelerometers to estimate combustion metrics in a 9L I6 diesel engine. So the transfer path between the accelerometer signal and the in-cylinder pressure signal needs to be modeled. Depending on the transfer path, the in-cylinder pressure signal and the combustion metrics can be accurately estimated - recovered from accelerometer signals. The method and applicability for determining the transfer path is critical in utilizing an accelerometer(s) for feedback. Single-input single-output (SISO) frequency response function (FRF) is the most common transfer path model; however, it is shown here to have low robustness for varying engine operating conditions. This thesis examines mechanisms to improve the robustness of FRF for combustion metrics estimation. First, an adaptation process based on the particle swarm optimization algorithm was developed and added to the single-input single-output model. Second, a multiple-input single-output (MISO) FRF model coupled with principal component analysis and an offset compensation process was investigated and applied. Improvement of the FRF robustness was achieved based on these two approaches. Furthermore a neural network as a nonlinear model of the transfer path between the accelerometer signal and the apparent heat release rate was also investigated. Transfer path between the acoustical emissions and the in-cylinder pressure signal was also investigated in this dissertation on a high pressure common rail (HPCR) 1.9L TDI diesel engine. The acoustical emissions are an important factor in the powertrain development process. In this part of the research a transfer path was developed between the two and then used to predict the engine noise level with the measured in-cylinder pressure as the input. Three methods for transfer path modeling were applied and the method based on the cepstral smoothing technique led to the most accurate results with averaged estimation errors of 2 dBA and a root mean square error of 1.5dBA. Finally, a linear model for engine noise level estimation was proposed with the in-cylinder pressure signal and the engine speed as components.

Online education, accrediting standards, and student success: An examination of the relationship between the southern association of colleges and schools commission on colleges standards for online education and student success

Prior to 2000, there were less than 1.6 million students enrolled in at least one online course. By fall 2010, student enrollment in online distance education showed a phenomenal 283% increase to 6.1 million. Two years later, this number had grown to 7.1 million. In light of this significant growth and skepticism about quality, there have been calls for greater oversight of this format of educational delivery. Accrediting bodies tasked with this oversight have developed guidelines and standards for online education. ^ There is a lack of empirical studies that examine the relationship between accrediting standards and student success. The purpose of this study was to examine the relationship between the presence of Southern Association of Colleges and Schools Commission on College (SACSCOC) standards for online education in online courses, (a) student support services and (b) curriculum and instruction, and student success. An original 24-item survey with an overall reliability coefficient of .94 was administered to students (N=464) at Florida International University, enrolled in 24 university-wide undergraduate online courses during fall 2014, who rated the presence of these standards in their online courses. The general linear model was utilized to analyze the data. The results of the study indicated that the two standards, student support services and curriculum and instruction were both significantly and positively correlated with student success but with small R2 and strengths of association less than .35 and .20 respectively. Mixed results were produced from Chi-square tests for differences in student success between higher and lower rated online courses when controlling for various covariates such as discipline, gender, race/ethnicity, GPA, age, and number of online courses previously taken. A multiple linear regression analysis revealed that the curriculum and instruction standard was the only variable that accounted for a significant amount of unique variance in student success. Another regression test revealed that no significant interaction effect exists between the two SACSCOC standards and GPA in predicting student success. ^ The results of this study are useful for administrators, faculty, and researchers who are interested in accreditation standards for online education and how these standards relate to student success.^