Desempenho de clones de seringueira sob diferentes sistemas de sangria.

Este trabalho teve como objetivo avaliar o crescimento e a producao da borracha de clones seringueira [Havea brasiliensis ( Wild. Ex Adr. De Juss.) Muell. Arg.] sob diferentes sistemas de sangria, em condição de Cerrado dos Municipios de Barro Alto Goianesia no Estado de Goais. O plantio foi feito em fevereiro de 1992, no espacamento de 8,0 x 2,5 m (500 plantas/ha), em talhoes de 8 a 10 hectares para cada um dos clones RRIM 600, GT 1, PB 217, PB 235, PR 107 e PR 255 os quais receberam as mesmas praticas de manejo. Aos oito anos de idade, foram feitas as seguintes avaliacoes: estande final; circunferencia do caule a 1,20 m do solo; porcentagens de plantas aptas a sangria; producao de borracha acumulada na caneca pesada mensalmente; incidencia de seca de painel. A producao foi avaliada em nove sistemas de sangria em meia espiral (1/2 S), praticados cinco dias por semana (5d/7) e 10 meses ao ano (10m/12), variando na frequência de sangria (d/4 e d/7 = a cada 4 e 7 dias), a concentracao de Ethephon (ET 0,25%, 2,5%,3,3% e 5,0%) e sua frequencia de aplicacao durante o periodo chuvoso ( a cada 22, 28 e 35 dias), como segue: 1) 1/2S, d/7, ET 2,5% a cada 22 dias; 2)1/2S, d/7, ET 2,5% a cada 30 dias (referncia); 3) 1/2S. d/4, ET 2,5% a cada 30 dias; 4) 1/2S, d/7, ET 3,3% a cada 22 dias; 5)1/2S, d/7, ET 3,3% a cada 30 dias; 6) 1/2S. d/7, ET 5,0% a cada 22 dias 7) 1/2S, d/7, ET 5,0% a cada 30 dias; 8) 1/2S, d/7, ET 5,0% a cada 35 dias; 9) 1/2S, d/7, ET 0,25% (pulverizando 10 ml por painel) a cada 22 dias. Nos sistemas 1 a 8, o Ethephon foi pincelado ( 1mL) na canaleta de corte e ate 2 cm acima dela (Pa e La). O delineamento experimental foi de blocos ao acaso, com quatro repeticoes de 10 plantas poe parcela. Cada clone constitui um experimento separado, sendo os resultados de producao acumulada anual submetidos a analise de variancia e, nos caso de significancia, as medias dos sistemas foram comparadas pelo teste Tukey, ao nível de 5% de probabilidade. Nao foi constatada qualquer incidencia de seca de painel e os resultados possibilitaram as seguintes conclusoes para as condicoes da regiao: 1) o sistema 1/2S, d/7, ET 2,5% a cada 30 dias e o mais indicado par a sangria dos clones PR 255, PR 107, PB 235, PB 217 e GT 1; 2) o sistema 1/2S, d/7, ET 3,3% a cada 30 dias e o mais indicado para a sangria do clone RRIM 600; 3) a producao individual de borracha em kg/planta/ano e maior nos clones RRIM 600, PB 217 e PR 255, enquanto a producao total em kg/ha/ano e superior nos clones RRIM 600 e PB 235; 4)os clones PB 217 e PR 255 sao menos adaptados a regiao, apresentando menores valores de estande final, circunferencia do caule, porcentagem de plantas em sangria e de producao total de borracha por hectare.

Ocorrência e controle da vaquinha em seringais em formação.

O controle da vaquinha é difícil por ser um inseto que se alimenta de muitas plantas e apresenta grande mobilidade. No entanto, a aplicação de produtos a base de Tricloform ou Carbaril, principalmente nos foliolos jovens, diminui os prejuízos causados pelo ataque da praga.

Obtenção de postura de Erinnyis ello (L. 1758) em cativeiro, em condições de campo.

Foram realizados ensaios no CNPSD visando-se obter postura de Erinnyis ello em cativeiro. O resultado obtido atestou a viabilidade da técnica de obtenção de postura da E. ello.

Aferição de competências em Endodontia percepcionadas pelos finalistas em Medicina Dentária e pelos Médicos Dentistas licenciados na Faculdade de Ciências de Saúde da Universidade Fernando Pessoa

Monografia apresentada à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Licenciada em Medicina Dentária

Urinary naphthalene and phenanthrene as biomarkers of occupational exposure to polycyclic aromatic hydrocarbons.

OBJECTIVES: The study investigated the utility of unmetabolised naphthalene (Nap) and phenanthrene (Phe) in urine as surrogates for exposures to mixtures of polycyclic aromatic hydrocarbons (PAHs). METHODS: The report included workers exposed to diesel exhausts (low PAH exposure level, n = 39) as well as those exposed to emissions from asphalt (medium PAH exposure level, n = 26) and coke ovens (high PAH exposure level, n = 28). Levels of Nap and Phe were measured in urine from each subject using head space-solid phase microextraction and gas chromatography-mass spectrometry. Published levels of airborne Nap, Phe and other PAHs in the coke-producing and aluminium industries were also investigated. RESULTS: In post-shift urine, the highest estimated geometric mean concentrations of Nap and Phe were observed in coke-oven workers (Nap: 2490 ng/l; Phe: 975 ng/l), followed by asphalt workers (Nap: 71.5 ng/l; Phe: 54.3 ng/l), and by diesel-exposed workers (Nap: 17.7 ng/l; Phe: 3.60 ng/l). After subtracting logged background levels of Nap and Phe from the logged post-shift levels of these PAHs in urine, the resulting values (referred to as ln(adjNap) and ln(adjPhe), respectively) were significantly correlated in each group of workers (0.71 < or = Pearson r < or = 0.89), suggesting a common exposure source in each case. Surprisingly, multiple linear regression analysis of ln(adjNap) on ln(adjPhe) showed no significant effect of the source of exposure (coke ovens, asphalt and diesel exhaust) and further suggested that the ratio of urinary Nap/Phe (in natural scale) decreased with increasing exposure levels. These results were corroborated with published data for airborne Nap and Phe in the coke-producing and aluminium industries. The published air measurements also indicated that Nap and Phe levels were proportional to the levels of all combined PAHs in those industries. CONCLUSION: Levels of Nap and Phe in urine reflect airborne exposures to these compounds and are promising surrogates for occupational exposures to PAH mixtures.

Design and Evaluation of a Retrofittable Electric Snow Melting System for Pavements

Gemstone Team SnowMelt

A mathematical description of the acoustic coupling of the mass/spring model

This paper describes hybrid mathematical model which couples the mechanics of the mass/spring model to the acoustic wave propagation model for use in generating the acoustic signal emitted by complex structures of paper fibres under strain. A discussion of the coupling method is presented including remarks on the errors encountered intrinsic to the discretisation scheme. The numerical results of a vibrating rubber band and a vibrating paper fibre are compared to their experimental counterparts. The fundamental frequencies of the acoustic signals are compared showing a close agreement between the experimental and numerical results

Evaluating the process of borosilicate glass capillaries used for fabrication of in-vitro fertilization (IVF) micro-pipettes

In this paper we investigate a number of gas flames for fire polishing borosilicate glass capillaries used in the manufacturing of IVF micro-pipettes. Hydrofluoric acid (HF) was also used as an alternative to finish the pipette end. Glass micro tools in the IVF industry are drawn from hollow glass capillaries of diameter 1 mm. These capillaries are cut manually to a length of 100 mm from hollow glass rods resulting in sharp and chipped edges. These capillaries are held in a customised holder having padding of soft silicone or rubber. Sharp and uneven edges of these capillaries pick up particles of rubber or soft silicone shavings, rendering them ineffective for IVF treatments. The working range of borosilicate glass is 800-1,200 degrees C. The experiments involved analysis of fire polishing process for borosilicate glass capillaries using candle, butane, propane, 2350 butane propane, oxyacetylene gas flames, finding the optimum distance of the capillary relative to the flame, optimum time for which the capillary should be held in the flame and optimum region of the flame which gives the required temperature range. The results show that 2350 butane propane gas mix is optimum for fire polishing of borosilicate glass capillaries. The paper is concluded by comparing the results of fire polishing with the results of acid polishing, in which HF of 1.6% concentration is used to etch the ends of the borosilicate glass pipettes.

Comments On The Pseudo-Microfossil Linotolypen

Hollow, black reticulate ‘microfossils’ of unknown affinity found in Ordovician to late Cretaceous sediments from North America, Europe and Australia were given the name Linotolypa by Eisenack in 1962. In 1978, he recognised that they were pseudo-microfossils consisting of asphalt, and noted that their structure resembled that of soap bubbles formed in agitated suspensions. These objects are well known as a component of the particles caught from the air by pollen and spore traps at the present day. They are correctly termed ‘cenospheres’ and are formed from coal and possibly pitch and fuel oil by incomplete combustion. If their presence were to be confirmed in Palaeozoic sediments, this would provide important new evidence for the occurrence of fire in the geological record and of the history of levels of O2 in the atmosphere.