Freqüência de hemolisinas anti-A e anti-B em doadores de sangue do Hemocentro de Botucatu

O Sistema ABO foi descoberto em 1900 e permanece até hoje como sendo o sistema mais importante dentro da prática transfusional. A transfusão ABO incorreta pode resultar na morte do paciente, com uma reação hemolítica intravascular, seguida de alterações imunológicas e bioquímicas. Os anticorpos ABO estão presentes nos soros dos indivíduos, dirigidos contra os antígenos A e/ou B ausentes nas hemácias. Embora as transfusões com pequenas quantias de plasmas incompatíveis sejam geralmente consideradas uma prática segura, alguns casos de reações hemolíticas por plasma incompatível são encontrados na literatura. Tendo em vista a pequena quantidade de estudos sobre as hemolisinas anti-A e anti-B e a importância desses anticorpos na prática transfusional, objetivamos neste trabalho verificar a freqüência dessas hemolisinas em doadores de sangue do Hemocentro da Unesp de Botucatu. Foram analisadas 600 amostras de soros de doadores do grupo O para presença ou ausência das hemolisinas anti-A e anti-B. Desses doadores, 77 (12,8%) foram classificados como perigosos por apresentarem em seu soro altos títulos de hemolisinas e 523 (87,2%) como não perigosos por apresentarem baixos títulos. No grupo dos doadores perigosos, 45 (58,4%) foram reativos para hemolisina anti-A, 11 (14,2%) reativos para hemolisina anti-B e 21 (27,2%) reativos para ambas. O título de aglutininas superior a 1/100 já considera o doador O como perigoso. Assim, o teste realizado em nossa rotina é suficiente para detecção de altos títulos fazendo com que os pacientes dos outros grupos sangüíneos não corram o risco de reação transfusional se necessitarem de transfusão sangüínea não-isogrupo.

Expressão imuno-histoquimica de colagenase-1 e gelatinases A e B em mixomas odontogênicos e papilas de germes dentários

The odontogenic myxoma shares cellular and structural aspects with dental papilla, which has been implicated as probable origin of this neoplasm. The aim of the present study was to perform a comparative immunohistochemical analysis for the expression of collagenase-1 (MMP-1) and gelatinases A (MMP-2) and B (MMP-9) in odontogenic myxomas and dental papilla of teeth germs. Twelve cases of odontogenic myxomas and eight specimens of teeth germs were selected. It was taken into consideration the presence or absence of immunoreactivity, the pattern of immunohistochemical distribution of proteases within extracellular matrix, as well as, the number of cells revealing immunostaining for matrix metalloproteinases (MMPs). It was verified a significant difference (p<0,05) in relation to MMP-2 immunoexpression, which was observed only within extracellular matrix of myxomas. Nevertheless, MMP-1 labeling was revealed by most of the cases of odontogenic myxoma, at levels close to those observed in dental papilla. In relation to the pattern of distribution, a significant difference was obtained between specimens (p<0,05), with neoplasms predominantly exhibiting a focal pattern for MMP-1. The quantitative analysis of neoplastic cells labeled for MMPs denoted a significant difference (p<0,05), demonstrating a higher proportion of MMP-1 in comparison to MMPs-2 and -9. It can be concluded that immunohistochemical expression of MMP-1 at levels comparable to those observed in dental papilla and quantitatively superior in relation to MMPs-2 and -9, suggest an implication of this protease on extracellular matrix degradation of odontogenic myxomas. Moreover, the possibility of interactions with receptors involved in cellular adhesion, particularly with integrins, suggests a plausible function on local invasiveness of such neoplasms. Additionally, the presence of a descent immunoexpression gradient for these MMPs on odontogenic myxomas, associated to substrate specificity inherent in each enzyme, suggest the existence of a coordinated mechanism between interstitial collagenase and gelatinases A and B in order to allow an efficient degradation of extracellular matrix and local invasion by neoplastic cells

Experimental measurements of the NOx and CO concentrations operating in oscillatory and non-oscillatory burning conditions

The effects of combustion driven acoustic oscillations in carbon monoxide and nitrogen oxides emission rates of a combustor operated with liquefied petroleum gas (LPG) were investigated. Because the fuel does not contain nitrogen, tests were also conducted with ammonia injected in the fuel, in order to study the formation of fuel NOx. The main conclusions were: (a) the pulsating combustion process is more efficient than the non-pulsating one and (b) the pulsating combustion process generates higher rates of NOx, with and without ammonia injection, as shown by CO and NO concentrations as function of the O-2 concentration. An increase in the LPG flow rate, keeping constant the air to fuel ratio, increased the acoustic pressure amplitude and the frequency of oscillation. The injection of ammonia had no influence on either pressure amplitude or frequency. (c) 2005 Elsevier Ltd. All rights reserved.

Aggregates in the strength and gravity regime: Particles sizes in Saturn's rings

Particles in Saturn's main rings range in size from dust to kilometer-sized objects. Their size distribution is thought to be a result of competing accretion and fragmentation processes. While growth is naturally limited in tidal environments, frequent collisions among these objects may contribute to both accretion and fragmentation. As ring particles are primarily made of water ice attractive surface forces like adhesion could significantly influence these processes, finally determining the resulting size distribution. Here, we derive analytic expressions for the specific self-energy Q and related specific break-up energy Q(star) of aggregates. These expressions can be used for any aggregate type composed of monomeric constituents. We compare these expressions to numerical experiments where we create aggregates of various types including: regular packings like the face-centered cubic (fcc), Ballistic Particle Cluster Aggregates (BPCA), and modified BPCAs including e.g. different constituent size distributions. We show that accounting for attractive surface forces such as adhesion a simple approach is able to: (a) generally account for the size dependence of the specific break-up energy for fragmentation to occur reported in the literature, namely the division into "strength" and "gravity" regimes and (b) estimate the maximum aggregate size in a collisional ensemble to be on the order of a few tens of meters, consistent with the maximum particle size observed in Saturn's rings of about 10 m. (c) 2012 Elsevier B.V. All rights reserved.

Nasoendoscopy of velopharynx before and during diagnostic therapy

Nasoendoscopy is an important tool for assessing velopharyngeal function. The purpose of this study was to analyze velar and pharyngeal wall movement and velopharyngeal gap during nasoendoscopic evaluation of the velopharynx before and during diagnostic therapy. Nasoendoscopic recordings of 10 children with operated cleft lip and palate were analyzed according to the International Working Group Guidelines. Ratings of movement of velum and pharyngeal walls, and size, location and shape of gaps were analyzed by 3 speech-language pathologists (SLPs). Imaging was obtained during repetitions of the syllable /pa/ during a single nasoendoscopic evaluation: (a) before diagnostic therapy, and (b) after the children were instructed to impound and increase intraoral air pressure (diagnostic therapy). Once the patients impounded and directed air pressure orally, the displacement of the velum, right, left and posterior pharyngeal walls increased 40, 70, 80, and 10%, respectively. Statistical significance for displacement was found only for right and left lateral pharyngeal walls. Reduction in gap size was observed for 30% of the patients and other 40% of the gaps disappeared. Changes in gap size were found to be statistically significant between the two conditions. In nasoendoscopic assessment, the full potential of velopharyngeal displacement may not be completely elicited when the patient is asked only to repeat a speech stimulus. Optimization of information can be done with the use of diagnostic therapy's strategies to manipulate VP function. Assuring the participation of the SLP to conduct diagnostic therapy is essential for management of velopharyngeal dysfunction.

Geração de casos de teste a partir de especificações B

With the increasing complexity of software systems, there is also an increased concern about its faults. These faults can cause financial losses and even loss of life. Therefore, we propose in this paper the minimization of faults in software by using formally specified tests. The combination of testing and formal specifications is gaining strength in searches mainly through the MBT (Model-Based Testing). The development of software from formal specifications, when the whole process of refinement is done rigorously, ensures that what is specified in the application will be implemented. Thus, the implementation generated from these specifications would accurately depict what was specified. But not always the specification is refined to the level of implementation and code generation, and in these cases the tests generated from the specification tend to find fault. Additionally, the generation of so-called "invalid tests", ie tests that exercise the application scenarios that were not addressed in the specification, complements more significantly the formal development process. Therefore, this paper proposes a method for generating tests from B formal specifications. This method was structured in pseudo-code. The method is based on the systematization of the techniques of black box testing of boundary value analysis, equivalence partitioning, as well as the technique of orthogonal pairs. The method was applied to a B specification and B test machines that generate test cases independent of implementation language were generated. Aiming to validate the method, test cases were transformed manually in JUnit test cases and the application, created from the B specification and developed in Java, was tested. Faults were found with the execution of the JUnit test cases

Serum Levels of Interleukins 6, 10, and 13 Before and After Treatment of Classic Hodgkin Lymphoma

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Association between distressing non-work-related events and occupational injuries

The following is a report on a case-control study whose objective was to investigate the association between distressing non-work-related events and occupational injures. Ninety three injured workers (cases) were matched with 372 non-injured controls in a large metallurgical factory in southeastern Brazil. Exposure to distressing non-work-related events was measured through a questionnaire focusing on situations pertaining to personal problems unrelated to work activities. The data were analyzed by adjusting a conditional logistic regression model, where occurrence of the work injury was the dependent dichotomous variable and answers from the questionnaire were independent continuous variables. The analysis showed an association between some distressing non-work-related events and occupational injuries. These findings imply expanding the horizon of preventive measures used in targeting. work injuries which have traditionally been focused on the control of strictly workplace risks.

Babesia spp. infection in Boophilus microplus engorged females and eggs in São Paulo State, Brazil

Babesia spp. infections were investigated in Bos taurus x Bos indicus dairy cows and calves and in Boophilus microplus engorged female ticks and eggs. Blood samples and engorged female ticks were collected from 25 cows and 27 calves. Babesia spp. was detected in ticks by microscopic examination of hemolymph of engorged female and by squashes of egg samples. Cattle infection was investigated in blood thin smears and by DNA amplification methods (PCR and nested PCR), using specific primers for Babesia bovis and Babesia bigemina. Merozoites of B. bovis (3 animals) and B. bigemina (12 animals) were detected exclusively in blood smears of calves. DNA amplification methods revealed that the frequency of B. bigemina infection in calves (92.6%) and in cows (84%) and of B. bovis in calves (85.2%) and in cows (100%) did not differ significantly (P > 0.05). Babesia spp. infection was more frequent in female ticks and eggs collected from calves (P < 0.01) than from cows, especially in those which had patent parasitemia. Hatching rates of B. microplus larvae were assessed according to the origin of engorged females, parasiternia of the vertebrate host, frequency and intensity of infection in engorged female tick, and frequency of egg infection. Hatching rate was lower in samples collected from calves (P < 0.01) than from cows, and in those in which Babesia spp. was detected in egg samples (P < 0.01). Published by Elsevier B.V.

Incidence and physical properties of PSE chicken meat in a commercial processing plant

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Testicular thermoregulation in Bos indicus, crossbred and Bos taurus bulls: relationship with scrotal, testicular vascular cone and testicular morphology, and effects on semen quality and sperm production

Mechanisms of testicular thermoregulation, the relationship of scrotal, testicular vascular cone (TVC), and testicular morphology with thermoregulatory capability, and their effects on semen quality and sperm production were studied in 20 Bos indicus, 28 crossbred, and 26 Bos taurus bulls. The ratio of testicular artery length and volume to testicular volume were larger (P < 0.05) in B. indicus and crossbred bulls than in B. taurus bulls (1.03 and 0.94 cm/cm(2). versus 0.48 cm/cm(3); 0.034 and 0.047 ml/cm(3) versus 0.017 ml/cm(3), respectively). Testicular artery wall thickness (average 192.5, 229.0, and 290.0 mum, respectively) and arterial-venous blood distance in the TVC (average 330.5, 373.7, and 609.4 pm, respectively) were smallest in B. indicus, intermediary in crossbred, and greatest in B. taurus bulls (P < 0.05); the proximity between arterial and venous blood was consistent with the estimated decrease in arterial blood temperature after passage through the TVC (5.9, 5.0, and 2.9 degreesC, in B. indicus, crossbred, and B. taurus bulls, respectively). In crossbred and B. taurus bulls, there was a positive top-to-bottom scrotal temperature gradient and a negative testicular subtunic temperature gradient. However, in B. indicus bulls, both scrotal and testicular subtunic temperatures gradients were positive. Differences in the vascular arrangement, characteristics of the artery (e.g. wall thickness) or thickness of the tunica albuginea may have affected the testicular arterial blood and subtunic temperatures in B. indicus bulls. Better testicular thermoregulatory capability was associated with increased scrotal shape (pendulosity), testicular artery length and volume, and top-to-bottom gradient of the distance between the artery wall and the veins in the TVC. Increased semen quality was associated with increased testicular volume and scrotal subcutaneous (SQT) temperature gradient, and with decreased scrotal surface and testicular temperatures. Increased sperm production was associated with increased testicular artery volume, testicular volume, and SQT temperature gradient, and with decreased testicular artery wall thickness, scrotal circumference (SC), and scrotal surface, testicular subtunic, and epididymal temperatures. In conclusion, morphology of the TVC may contribute to the greater resistance of B. indicus bulls to high ambient temperatures by conferring a better testicular blood supply and by facilitating heat transfer between the testicular artery and veins. Testicular thermoregulation was associated with opposing scrotal and testicular subtunic temperatures gradients only in crossbred and B. taurus bulls. Scrotal, TVC, and testicular morphology influence testicular thermoregulatory capability and were associated with differences in semen quality and sperm production. (C) 2003 Elsevier B.V. All rights reserved.

Effect of age and genetic group on characteristics of the scrotum, testes and testicular vascular cones, and on sperm production and semen quality in AI bulls in Brazil

The objectives were to determine the effects of age and genetic group on characteristics of the scrotum, testes and testicular vascular cones (TVC), and on sperm production and semen quality in 107 Bos indicus, B, taurus and cross-bred bulls at three artificial insemination (AI) centers in Brazil. In addition, predictors of sperm production and semen quality were identified. In general, scrotal circumference (SC), scrotal shape score, scrotal neck perimeter, and testicular size (length, width and volume) increased (P < 0.05) with age. Although there were no significant differences among genetic groups for SC or testicular size, B. indicus bulls had the least pendulous scrotal shape, the shortest scrotal neck length, and the greatest scrotal neck perimeter (P < 0.05). Fat covering the TVC was thinner (P < 0.05) in bulls <= 36 months of age and in B. taunts bulls than in older bulls and B. indicus bulls, respectively. Age and genetic group did not affect testicular ultrasonic echotexture. B. indicus bulls tended (P < 0.1) to have the lowest average scrotal surface temperature (SST). In general, ejaculate volume, total number of spermatozoa and number of viable spermatozoa increased (P < 0.05) with age. However, there was no significant effect of age on sperm concentration, motility, major and total defects. The proportion of spermatozoa with minor defects was highest (P < 0.05) in bulls 37-60 months of age. B. indicus bulls had higher (P < 0.01) sperm concentration, total number of spermatozoa and number of viable spermatozoa than B. taunts bulls, with intermediate values for cross-bred bulls. Increased sperm production was associated with increased testicular volume, SC, TVC fat cover, and SST top-to-bottom gradient. Decreased semen quality was associated with increased SC and bottom SST, and decreased scrotal shape, scrotal neck perimeter and vascular cone diameter. In summary, age and genetic group affected the characteristics of the scrotum, testes, and TVC, sperm production and semen quality. In addition, characteristics of the scrotum, testes and TVC were associated with sperm production and semen quality in bulls and could be assessed for breeding soundness evaluation. (c) 2002 Elsevier B.V. All rights reserved.

Effects of environmental factors, age and genotype on sperm production and semen quality in Bos indicus and Bos taurus AI bulls in Brazil

The effects of ambient temperature and humidity, month, age and genotype on sperm production and semen quality in AI bulls in Brazil were evaluated. Data from two consecutive years were analyzed separately. Seven Bos indicus and 11 Bos taurus bulls from one artificial insemination (AI) center were evaluated in Year 1 and 24 B. indicus and 16 B. taurus bulls from three AI centers were evaluated in Year 2. Ambient temperature and humidity did not significantly affect sperm production and semen quality, probably because there was little variation in these variables. Month accounted for less than 2% of the variation in sperm production and semen quality. Increased bull age was associated with decreased sperm motility (P < 0.10) and increased minor sperm defects (P < 0.001) in Year 1. B. indicus bulls had greater (P < 0.005) sperm concentration than B. taurus bulls in both years (1.7 x 10(9)/ml versus 1.2 x 10(9)/ml in Year 1 and 1.6 x 10(9)/ml versus 1.2 x 10(9)/ml in Year 2, respectively). Ejaculate volume was not significantly affected by genotype in Year 1 (6.6 ml versus 6.9 ml in B. indicus and B. taurus bulls, respectively), but B. indicus bulls had greater (P < 0.05) total (11.4 x 10(9) versus 8.2 x 10(9)) and viable (6.7 x 10(9) versus 4.9 x 10(9)) numbers of spermatozoa in the ejaculate than B. taurus bulls. In Year 2, B. taurus bulls had greater (P < 0.05) ejaculate volume than B. indicus bulls (8.2 ml versus 6.7 ml, respectively) and total and viable number of spermatozoa in the ejaculate were not significantly different between genotypes (10.3 x 10(9) versus 9.1 x 10(9) and 6.1 x 10(9) versus 5.4 x 10(9) in B. indicus and B. taurus bulls, respectively). Sperm motility was not significantly affected by genotype (mean, 59%). In Year 1, B. indicus bulls tended (P < 0.10) to have more major sperm defects and had more (P < 0.05) total sperm defects than B. taurus bulls (11.8% versus 8.7% and 13.6% versus 10.0%, respectively). In Year 2, B. indicus bulls tended (P < 0.10) to have more total sperm defects than B. taurus bulls (16.2% versus 13.3%, respectively). In conclusion, neither ambient temperature and humidity nor month (season) significantly affected sperm production and semen quality. B. indicus bulls had significantly greater sperm concentration and B. taurus bulls had significantly fewer morphologically defective spermatozoa. (C) 2002 Elsevier B.V. B.V. All rights reserved.

In Vitro Biomechanical Evaluation of the Use of Conventional and Locking Miniplate/Screw Systems for Sagittal Split Ramus Osteotomy

Purpose: The aim of this in vitro study was to assess the biomechanical stability of 9 different osteosynthesis methods after sagittal split ramus osteotomy by simulating the masticatory forces and using a 3-point biomechanical test method.Materials and Methods: Forty-five polyurethane hemimandibles with bone-like consistency were randomly assigned to 9 groups (n = 5) and subjected to sagittal split ramus osteotomy. After 4-mm advancement of the distal segment, the bone segments were fixed by different osteosynthesis methods using 2.0-mm miniplate/screw systems: group A, one 4-hole conventional straight miniplate; group B, one 4-hole locking straight miniplate; group C, one 4-hole conventional miniplate and one bicortical screw; group D, one 4-hole locking miniplate and 1 bicortical screw; group E, one 6-hole conventional straight miniplate; group F, one 6-hole locking straight miniplate; group (3: two 4-hole conventional straight miniplates; group H. two 4-hole locking straight miniplates; and group 1, 3 bicortical screws in an inverted-L. pattern. All models were mounted on a base especially constructed for this purpose. Using a 3-point biomechanical test model, the hemimandibles were loaded in compressive strength in an Instron machine (Norwood, MA) until a 3-mm displacement occurred between segments vertically or horizontally. Data were analyzed by analysis of variance and Tukey test (alpha = 1%).Results: The multiparametric comparison of the groups showed a statistically significant difference (P<.01) between groups that used 2 miniplates (groups G and H), 1 miniplate and 1 bicortical screw (groups C and D), and only bicortical screws (group D compared with groups that used only 1 miniplate with 2 screws per segment (groups A and B) and 3 screws per segment (groups E and F).Conclusion: The placement of 2.0-mm-diameter bicortical screws in the retromolar region, associated or not with conventional and locking miniplates with monocortical screws, promoted a better stabilization of bone segments. Locking miniplates presented a better performance in bone fixation in all groups. (C) 2010 American Association of Oral and Maxillofacial Surgeons J Oral Maxillofac Surg 68:724-730, 2010

Finite Element Analysis to Compare Complete Denture and Implant-Retained Overdentures With Different Attachment Systems

This finite element analysis compared stress distribution on complete dentures and implant-retained overdentures with different attachment systems. Four models of edentulous mandible were constructed: group A (control), complete denture; group B, overdenture retained by 2 splinted implants with bar-clip system; group C, overdenture retained by 2 unsplinted implants with o'ring system; and group D, overdenture retained by 2 splinted implants with bar-clip and 2 distally placed o'ring system. Evaluation was performed on Ansys software, with 100-N vertical load applied on central incisive teeth. The lowest maximum general stress value (in megapascal) was observed in group A (64.305) followed by groups C (119.006), D (258.650), and B (349.873). The same trend occurred it) supporting tissues with the highest stress value for cortical bone. Unsplinted implants associated with the o'ring attachment system showed the lowest maximum stress values among all overdenture groups. Furthermore, o'ring system also improved stress distribution when associated with bar-clip system.