Bonding Of Alumina And Metal Using Bulk Metallic Glass Forming Alloy

Metal-alumina joints have found various practical applications in electronic devices and high technology industry. However, making of sound metal ceramic brazed couple is still a challenge in terms of its direct application in the industry. In this work we successfully braze copper with Al2O3 ceramic using Zr52.5Cu17.9Ni14.6Al10Ti5 bulk metallic glass forming alloy as filler alloy. The shear strength of the joints can reach 140 MPa, and the microstructrural analysis confirms a reliable chemical boning of the interface. The results show that the bulk metallic glass forming alloys with high concentration of active elements are prospective for using as filler alloy in metal-ceramic bonding.

Development And Characterization Of Composite Ni-Cr-C-Caf2 Laser Cladding On Gamma-Tial Intermetallic Alloy

A process of laser cladding Ni-CF-C-CaF2 mixed powders to form a multifunctional composite coatingd on gamma-TiAl substrate was carried out. The microstructure of the coating was examined using XRD, SEM and EDS. The coating has a unique microstructure consisting of primary dendrite or short-stick TiC and block Al4C3 carbides reinforcement as well as fine isolated spherical CaF2 solid lubrication particles uniformly dispersed in the NiCrAlTi (gamma) matrix. The average microhardness of the composite coatings is approximately HV 650 and it is 2-factor greater than that of the TiAl substrate. (C) 2008 Elsevier B.V. All rights reserved.

Influences Of Precursor Constitution And Processing Speed On Microstructure And Wear Behavior During Laser Clad Composite Coatings On Gamma-Tial Intermetallic Alloy

The effects of constitution of precursor mixed powders and scan speed on microstructure and wear properties were designed and investigated during laser clad gamma/Cr7C3/TiC composite coatings on gamma-TiAl intermetallic alloy substrates with NiCr-Cr3C2 precursor mixed powders. The results indicate that both the constitution of the precursor mixed powders and the beam scan rate have remarkable influence on microstructure and attendant hardness as well as wear resistance of the formed composite coatings. The wear mechanisms of the original TiAl alloy and laser clad composite coatings were investigated. The composite coating with an optimum compromise between constitution of NiCr-Cr3C2 precursor mixed powders as well as being processed under moderate scan speed exhibits the best wear resistance under dry sliding wear test conditions. (C) 2008 Elsevier Ltd. All rights reserved.

The cast net fishery, Kainji Lake, Nigeria 1970-1997

This study was carried out to establish trends in the cast net fishery of Kainji Lake, Nigeria. The cast net fishery was second in importance to the gillnet fishery in the early years after impoundment of the lake and still continues to be an important component of the fishery. Some of the economically important species such as Citharinus spp, Tilapia spp, Labeo spp, Alestes spp and Synodontis spp are exploited by cast nets. The study has not revealed any drastic perturbation in the species diversity, catch composition, and any real ecosystem overfishing. On the other hand, both the catfish, Auchenoglanis spp and the predator Hydrocynus spp appear to have increased in the catch in recent years. Never-the-less there is a decline in the mean weight of the major exploited fish species due to the capture of under sized fishes without allowing them to grow to 'legally' marketable sizes. The use of small meshed cast net and also fishing in the shallow waters of the lake can give rise to this situation. Thus, there are signs of growth overfishing in the fish stocks. It must also be acknowledged that the situation is complicated by the fact that in a multi-gear fishery as on Kainji Lake, the cast net fishery could not be managed in isolation without due regard to the other competing gears. The catch per unit of effort (CPUE) has declined in the cast net fishery possibly due to the increase in effort by the major fishing gears over the years. The ongoing extension campaigns by the KLFPP appears to be having the desired effect, as there was reduction in the number of the major fishing gears on the Lake in 1997. It can be anticipated that if this trend continues, the CPUE will recover in the long run. Yields observed from the mesh selectivity study revealed that for major species in the cast net fishery, both by number and weight, were maximal at 2.5 inch mesh, which contrasts with the fact that current minimum allowable mesh in the Fisheries Edict for the Lake is 2.0 inch. The adoption of 2.5 inch as the minimum allowable mesh in the cast net fishery is recommended to be included in future revision of existing regulations. It is also recommended that for this control to have a desired effect, the casting of the net from the shore should be prohibited so as to reduce the incidence of juvenile mortality in the nursery areas. (PDF contains 28 pages)

Space-resolved spectral diagnosis of line-shaped laser-produced magnesium plasmas

Space-resolved spectra of line-shaped laser-produced magnesium plasmas in the normal direction of the target have been obtained using a pinhole crystal spectrograph. These spectra are treated by a spectrum analyzing code for obtaining the true spectra and fine structures of overlapped lines. The spatial distributions of electron temperature and density along the normal direction of the target surface have been obtained with different spectral diagnostic techniques. Especially, the electron density plateaus beyond the critical surface in line-shaped magnesium plasmas have been obtained with a fitting technique applied to the Stark-broadened Ly-alpha wings of hydrogenic ions. The difference of plasma parameters between those obtained by different diagnostic techniques is discussed. Other phenomena, such as plasma satellites, population inversion, etc., which are observed in magnesium plasmas, are also presented.

A Study on iron-based amorphous alloys : alloy development, thermodynamics and soft magnetism

Metallic glass has since its debut been of great research interest due to its profound scientific significance. Magnetic metallic glasses are of special interest because of their promising technological applications. In this thesis, we introduced a novel series of Fe-based alloys and offer a holistic review of the physics and properties of these alloys. A systematic alloy development and optimization method was introduced, with experimental implementation on transition metal based alloying system. A deep understanding on the influencing factors of glass forming ability was brought up and discussed, based on classical nucleation theory. Experimental data of the new Fe-based amorphous alloys were interpreted to further analyze those influencing factors, including reduced glass transition temperature, fragility, and liquid-crystal interface free energy. Various treatments (fluxing, overheating, etc.) were discussed for their impacts on the alloying systems' thermodynamics and glass forming ability. Multiple experimental characterization methods were discussed to measure the alloys' soft magnetic properties. In addition to theoretical and experimental investigation, we also gave a detailed numerical analysis on the rapid-discharge-heating-and-forming platform. It is a novel experimental system which offers extremely fast heating rate for calorimetric characterization and alloy deformation.