964 resultados para Aquecedores solares de baixo custo


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Aperfeiçoamento em equipamento para digestão de amostras por via úmida. É descrito um aperfeiçoamento em equipamento para digestão de amostras por via úmida que emprega tubos de digestão (20) fechados não encapsulados e aquecimento condutivo que possibilita a rápida decomposição de amostras botânicas, alimentícias, clínicas, ambientais e similares, promovendo um gradiente de temperatura em direção à parte superior do tubo de digestão, permitindo que a temperatura da fase gasosa seja inferior à da fase líquida, de forma que as digestões são realizadas à pressão pouco elevada e, consequentemente, os tubos de digestão utilizados podem ter paredes menos espessas, permitindo o rápido aquecimento e resfriamento das amostras, bem como baixo custo de operação e manutenção, simplicidade, alta frequência analítica,; redução do consumo de reagentes e diminuição da geração de resíduos, dito equipamento provido de um gabinete (10) que evita a contaminação da atmosfera do laboratório por vapores ácidos e a perda dos componentes voláteis da amostra durante o aquecimento

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This work investigates the gender effect on visual demand of drivers for dynamic maps at different cartographic scales presented In-Vehicle Route Guidance and Navigation System (RGNS). A group of 52 subjects (26 males and 26 females) took part in an experiment performed in a low-cost driving simulator. the driver's task consisted of navigating in an unknown route using a RGNS prototype which presents maps at two different cartographic scales. This paper replicates the known phenomenon of significant relationships between gender and performance at visual-spatial tasks issue. Our results show that drivers of different genders present distinct levels of visual demand both due to the cartographic scales and maneuver complexity variation. These discussed results are based upon individual differences in terms of spatial ability and spatial anxiety.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Pós-graduação em Ciência da Computação - IBILCE

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Pós-graduação em Engenharia Mecânica - FEG

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Pós-graduação em Microbiologia Agropecuária - FCAV

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Pós-graduação em Medicina Veterinária - FCAV

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This work points out innovative alternatives for increasing the visibility of nonprofits using the creative profile of the public relations professional through guerrilla marketing. By means of methodological literature and document the suggested proposal is that the public relations through a Strategic Planning, articulate actions of guerrilla marketing on behalf of third sector concerns increasing its visibility to the state's eyes, the private sector and company making the fundraising and the visibility of these entities increase with low cost, creativity and technique. How guerrilla marketing can encourage smaller competitor it is evident to face their opponents with great creative weapons, innovative and cost effective, providing improvement in the area of activity and easier to raise funds; especially in the third sector entities, which is moved without any profit, only for individual or collective will to solve social issues

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This paper presents a proposal for the automation of the camera calibration process, locating and measuring image points in coded targets with sub-pixel precision. This automatic technique helps minimize localization errors, regardless of camera orientation and image scale. To develop this technique, several types of coded targets were analyzed and the ARUCO type was chosen due to its simplicity, ability to represent up to 1024 different targets and availability of source code implemented with the OpenCV library. ARUCO targets were generated and two calibration sheets were assembled to be used for the acquisition of images for camera calibration. The developed software can locate targets in the acquired images and it automatically extracts the coordinates of the four corners with sub-pixel accuracy. Experiments were conducted with real data showing that the targets are correctly identified unless excessive noise or fragmentation occurs mainly in the outer target square. The results with the calibration of a low cost camera showed that the process works and that the measurement accuracy of the corners achieves sub-pixel precision.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

One of the most primal ways of human work already known is the tessellation and ginning for the production of fabric and clothing - what used to be, back in those days, statement of power and status. The arrival of the Industrial Revolution - in the middle of the XVIII century at Britain - increased the textile industry production, and what used to be manufactured and hard to obtain, starts then to be produced in mechanical ways and large-scale. Despite all the boost given to the economy of an expanding capitalist market, it should be pointed out the consequences of this major industrialization, especially the environmental ones, more and more concerning nowadays. The emissions of waste - that sometimes could be toxic - in effluents can possibly contaminate the aquatic ecosystems, causing a huge damage to its fauna and flora, affecting therefore all the biodiversity, reaching inclusively the humans. To avoid these problems, a few strategies have been taking place in the attempt to eliminate - or at least reduce - the amount of dye found in the effluents, and as the textile industry constantly leaves waste, efficient methods - that present good results in a short period of time - with a low cost are needed. The present study will test the bioremoval capacity of yeast (Saccharomyces cerevisiae) in contact with dyes in a fix concentration, diluted in water with three different pH values. The tests will be done duplicate, and after the concentration analyses - made by spectrophotometry - it will be analyzed which pH shows major efficiency in the dye removal and what is the influence of the biomass in this process

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Virtual Reality it's present in our personal and professional daily life. Currently it comes been tested in many parameters. An example is, as an intervention mode related to healthy and rehabilitation field ( since phobias to physical problems ) due to dynamic interactive between human being and virtual reality, was able to be designed by a hardware and software integrated system. His appearance was in 1950s, through NASA's flight simulators in order to train astronauts in epoch (TORI et al.,2006).Subsequently, this began to expand to entertainment industry, where due to consumerism, only increasing his capacity to become so much more realist and reliable with the real environment. Because of this, beyond of your capacity be accessible which is low-cost, was used in scientific researches (motor area, physical aptitudes, cognitive, health, among others). The projected interactivity in this system type, in general, seek act according to people answers about the elements of virtual reality. Using the capacity that the reality is able to act of integrated way for human being. Following these concepts about virtual reality, the present study of literature revision, it comes as an purpose see humanity development. Since its birth, going on that point until your actuation and direct and indirect interplay in today's society from maturational form. Taking the concept of researchers' theory like Piaget. Following this line, the study will analyse how virtual reality might come to modify and act in social construction of society nowadays

Relevância:

100.00% 100.00%

Publicador:

Resumo:

We analyzed with this work the importance of using experiments in the classroom, especially the low-cost experiments for better learning of Physics, discussing the context where this discipline is inserted, which in general, has been presented to students in a traditional, mechanistic way. We worked with the electrostatic theme and low cost didactic experiments, focusing on the pizza electrophorus. About the handling of this experiment, we can see the surprise and curiosity in students, depending on how it is used in didactic activities in order to make it meaningful to the student. We discussed how the curiosity can be harnessed in the classroom, the types of curiosity according to Freire, how to overcome the curiosity to become epistemological, the physics involved in the experiment and the teacher's role in this context