Ultrafiltration membranes from waste polyethylene terephthalate and additives: synthesis and characterization

The synthesis and characterization of asymmetric ultrafiltration membranes from recycled polyethylene terephthalate (PET) and polyvinylpyrrolidone (PVP) is reported. PET is currently used in many applications, including the manufacture of bottles and tableware. Monomer extraction from waste PET is expensive, and this process has not yet been successfully demonstrated on a viable scale. Hence, any method to recycle or regenerate PET once it has been used is of significant importance from scientific and environmental research viewpoints. Such a process would be a green alternative due to reduced raw monomer consumption and the additional benefit of reduced manufacturing costs. The membranes described here were prepared by a phase-inversion process, which involved casting a solution containing PET, m-cresol as solvent, and polyethylene glycol (PEG) of different molecular weights as additives. The membranes were characterized in terms of pure water permeability (PWP), molecular weight cut-off (MWCO), and flux and membrane morphology. The results show that the addition of PEG with high molecular weights leads to membranes with higher PWP. The presence of additives affects surface roughness and membrane morphology.

Application of fourier transform infrared spectroscopy, chemical and chemometrics analyses to the characterization of agro-industrial waste

Agroindustrial waste in general presents significant levels of nutrients and organic matter and has therefore been frequently put to agricultural use. In this context, the objective of this study was to determine the chemical composition, nitrogen, phosphorus, potassium, calcium, magnesium and carbon content, as well as the qualitative characteristics through Fourier transform infrared spectroscopy of four samples of poultry litter and one sample of cattle manure, from the southwestern region of Paraná, Brazil. Results revealed that, in general, the poultry litter presented higher amount of nutrients and carbon than the cattle manure. The infrared spectra allowed identification of the functional groups present and the differences in degree of sample humification. The statistical treatment confirmed the quantitative and qualitative differences revealed.

TREATMENT OF WASTE FROM ATOMIC EMISSION SPECTROMETRIC TECHNIQUES AND REUSE IN UNDERGRADUATE LAB CLASSES FOR QUALITATIVE ANALYSIS

Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma optical emission spectrometry (ICP OES) are widely used in academic institutions and laboratories for quality control to analyze inorganic elements in samples. However, these techniques have been observed to underperform in sample nebulization processes. Most of the samples processed through nebulization system are discarded, producing large volumes of waste. This study reports the treatment and reuse of the waste produced from ICP OES technique in a laboratory of analytical research at the Universidade Federal do Ceará, Brazil. The treatment of the waste was performed by the precipitation of elements using (NH4)2CO3. Subsequently, the supernatant solution can be discarded in accordance with CONAMA 430/2011. The precipitate produced from the treatment of residues can be reused as a potential sample in undergraduate qualitative analytical chemistry lab classes, providing students the opportunity to test a real sample.

Integration of the Food Waste Disposer Unit to the Existing Sewage System

Among the numerous approaches to food waste treatment, the food waste disposers method (FWDs), as a newcomer, has become slowly accepted by the general public owing to the worries about its impact on the existing sewage system. This paper aims to justify the role of FWDs in the process of urbanization in order to better prepare a city to take good care of the construction of its infrastructure and the solid waste treatment. Both the literatures and the case study help to confirm that FWDs has no negative effects on the wastewater treatment plant and it is also environmental friendly by reducing the greenhouse gas emissions. In the case study, the Lappeenranta waste water treatment plant has been selected in order to figure out the possible changes to a WWTP following the integration of FWDs: the observation shows only minor changes take place in a WWTP, in case of 25% application, like BOD up 7%, TSS up 6% and wastewater flowrate up 6%, an additional sludge production of 200 tons per year and the extra yield of methane up to 10000m3 per year; however, when the utilization rate of FWD is over 75%, BOD, TSS, and wastewater flowrate will experience more significant changes, thus exerting much pressure on the existing WWTP. FWDs can only be used in residential areas or cities equipped with consummate drainage network within the service sphere of WWTP, therefore, the relevant authority or government department should regulate the installation frequency of FWDs, while promoting the accessory application of FWDs. In the meanwhile, WWTP should improve their treatment process in order to expand their capacity for sludge treatment so as to stay in line with the future development of urban waste management.

Sustainable animal production : "suosittelen tuotantoeläinten parissa toimiville"

Kirjallisuusarvostelu

OMNIS HOMO DE NECESSITATE EST ANIMAL: SIGNIFICACIÓN Y REFERENCIA VACÍA EN LA SEGUNDA MITAD DEL SIGLO 13

A questão "se uma elocução (palavra/termo/nome) perde seu significado com a destruição das coisas (quer dizer, as coisas significadas)"surge como uma questão sobre o valor-verdade de declarações com um termo vazio como sujeito, a saber, como um subproblema do sofisma "Se 'omnis homo de necessitate est animal' é verdade quando não há homem algum (=OHNEA)". Neste trabalho, trarei as discussões conforme elas se apresentam em "De signis" IV.2 de Roger Bacon, em "Quaestiones logicales", q. 2–3 de Peter John Olivi, no OHNEA de Boethius of Dacia, e no OHNEA de Anonymus Alani. Tais textos nos apresentam quatro modos diversos de nos relacionarmos com a questão sobre significação para OHNEA e, assim, com quatro posições diferentes sobre a relação entre significação e referência vazia. Usarei Anonymus Alani como o fio conductor de minha análise, inserindo outras posições onde tal se fizer relevante.

Quasi-objects and actors in the web of belief. Formation of a national nuclear waste management system: the case of Finland

Paper presented in ISA RC23 meeting, Gothenburg July 16th 2010

Industrial solid waste (whitewash mud) use in forest road pavements

The objective of the present study was to evaluate the effects of industrial solid waste (whitewash mud) on geotechnical properties considering the following engineering parameters: California Bearing Ratio (CBR), Atterberg limits and Permeability test. Seven soil samples derived from Alagoinhas, Bahia - Brazil, were classified by the Transportation Research Board (TRB) system. Two were selected as having a great geotecnical potential classified as A-3 (0) and A-2-4 (0), whitewash mud contents 10%, 15%, 20% and 25% dry weight and medium compaction effort were studied in the laboratory testing program. The results indicated the soil denominated good gravel as being the most promising one, when stabilized with whitewash mud, reaching the best results with the dosage of 20 and 25% of whitewash mud.

Waste Stream Investigation from Perspective of Changing Waste Legislation at Green Sand Foundries

The update of the Finnish legislation concerning waste was unavoidable, to comply with the European Union (EU) requirements defined in the EU-Directive on Waste. The new waste law updates were enacted into the Finnish legislation on the 11.03.2011 and targeted for applicability by the 11.03.2012. This thesis investigates the implications of the new amendments to the waste legislation from the perspective of green sand foundries. The investigations are conducted by comparing two of Componenta’s green sand foundries and evaluating their waste streams. Additionally, the impacts of legislation amendments are critiqued on their environmental and economic aspects. The study’s comparison of waste fractions at the two foundries reveals that sand is dominant in absolute tonnage and costs. The increments of waste taxes forces foundries to focus on waste management, recycling and disposing. The new legislation’s promotion of material efficiency, also guides foundries towards the prevention of waste. A potential preventive measure is to regenerate waste sand resulting to cost savings on both raw-materials and waste management. However, the lack of absolute targets for waste prevention or recycling rates discourages the interests towards creating or adopting new technologies and methods for the waste handling.

BIOMASS SUPPLY CHAIN ANALYSIS WITH DENSIFIED WASTE

ABSTRACT The possibility to vary the energy matrix, thus reducing the dependency on fossil fuels, has amplified the acceptance of biomass as an alternative fuel. Despite being a cheap and renewable option and the fact that Brazil is a major producer of waste from agriculture and forestry activities, the use of these materials has barriers due to its low density and low energetic efficiency, which can raise the costs of its utilization. Biomass densification has drawn attention due to its advantage in comparison to in natura biomass due to its better physical and combustion characteristics. The objective of this paper is to evaluate the impact of biomass densification in distribution and transport costs. To reach this objective, a mathematical model was used to represent decisions at a supply chain that coordinates the purchase and sale of forestry and wood waste. The model can evaluate the options to deliver biomass through the supply chain combining demand meeting and low cost. Results point to the possibility of an economy of 60% in transport cost and a reduction of 63% in the required quantity of trucks when densified waste is used. However, costs related to the densifying process lead to an increase of total supply costs of at least 37,8% in comparison to in natura waste. Summing up, the viability of biomass briquettes industry requires a cheaper densification process.

Zoneamento bioclimático da região sudeste do Brasil para o conforto térmico animal e humano

O objetivo deste trabalho foi avaliar as condições de clima da região Sudeste do Brasil, por meio do índice de temperatura e umidade (ITU), e apresentar o zoneamento bioclimático relacionado ao conforto térmico animal e humano. Os valores de ITU foram estimados a partir de dados de temperatura e umidade relativa do ar para o período de 1980 a 2000. Quatro intervalos de ITU foram usados para classificar o desempenho humano (ITU < 74: conforto; 74 < ITU < 79: quente; 79 < ITU < 84: muito quente, e ITU > 84: extremamente quente), e dois intervalos para classificar a produção animal (79 < ITU < 84: perigoso e ITU > 84: emergência). Os resultados mostraram maior risco de desconforto térmico no período de outubro a abril, comparado ao período entre maio e setembro. O período mais crítico ocorreu entre dezembro e março. Apesar de se ter observado que valores de ITUméd entre 79 e 84 ocorreram em menos de 3,6% do tempo, humanos, bem como animais, podem sofrer algum grau de estresse térmico durante as horas mais quentes do dia, afetando ambos negativamente, produção animal e rendimento humano. Valores de ITU maiores que 84 não foram observados para a região estudada.

Animal Lovers, Bridge-Builders, and Supervising Watchdogs: Framing and Civil Society Construction by Japanese Pro-Animal Organizations in the Kansai and Tokyo Areas

Unlike their counterparts in Europe and America, the citizen organizations acting for the well-being of animals in Japan have not received scholarly attention. In this research, I explore the activities of twelve Japanese pro-animal organizations in Tokyo and Kansai area from the perspective of social movement and civil society studies. The concept of a ‘pro-animal organization’ is used to refer generally to the collectives promoting animal well-being. By using the collective action frame analysis and the three core framing tasks – diagnostic, prognostic, and motivational – as the primarily analytical tools, I explore the grievances, tactics, motivational means, constructions of agency and identity as well as framing of civil society articulated in the newsletters and the interviews of the twelve organizations I interviewed in Japan in 2010. As the frame construction is always done in relation to the social and political context, I study how the organizations construct their roles as civil society actors in relation to other actors, such as the state, and the idea of citizen activism. The deficiencies in the animal welfare law and lack of knowledge among the public are identified as the main grievances. The primary tactic to overcome these problems was to educate and inform the citizens and authorities, because most organizations lack the channels to influence politically. The audiences were mostly portrayed as either ignorant bystanders or potential adherents. In order to motivate people to join their cause and to enforce the motivation within the organization, the organizations emphasized their uniqueness, proved their efficiency, claimed credit and celebrated even small improvements. The organizations tended to create three different roles for citizen pro-organizations in civil society: reactive, apolitical and emphatic animal lovers concentrating on saving individual animals, proactive, educative bridge-builders seeking to establish equal collaborative relations with authorities, and corrective, supervising watchdogs demanding change in delinquencies offending animal rights. Based on the results of this research, I suggest that by studying how and why the different relations between civil society and the governing actors of the state are constructed, a more versatile approach to citizens’ activism in its context can be achieved.

Produção animal e o meio ambiente: uma comparação entre potencial de emissão de metano dos dejetos e a quantidade de alimento produzido

O objetivo do trabalho foi efetuar a comparação das principais espécies de interesse agropecuário, em relação à eficiência de conversão das dietas em produtos de origem animal (carne ou ovo), produção de resíduo e potencial de emissão de metano, a partir da fermentação dos resíduos. Para isso, foram selecionadas cinco espécies de animais durante a fase de produção: 1) suínos, do nascimento ao abate (peso vivo (PV) final de 90 kg) ; 2) bovinos, do desmame ao abate (PV: 520 kg); 3) caprinos, do desmame ao abate (PV: 30 kg); 4) aves, durante toda a fase de postura (14,7 kg de ovos); 5) frango de corte, do nascimento ao abate (PV: 3,1 kg). Para a estimativa dos parâmetros propostos, foram medidos os dados do desempenho e efetuou-se a biodigestão anaeróbia dos dejetos produzidos pelos animais. De maneira geral, os dejetos dos ruminantes apresentaram altas concentrações de fibra e baixos potenciais de produção de biogás; no entanto, o menor desempenho destes animais na conversão do alimento em produto e a maior produção de dejetos fizeram com que eles apresentassem maiores produções de metano por kg de alimento produzido.

Method of numerical correction of errors occasioned by delay of records during the monitoring of environmental variables of interest for animal production

Thermal and air conditions inside animal facilities change during the day due to the influence of the external environment. For statistical and geostatistical analyses to be representative, a large number of points spatially distributed in the facility area must be monitored. This work suggests that the time variation of environmental variables of interest for animal production, monitored within animal facility, can be modeled accurately from discrete-time records. The aim of this study was to develop a numerical method to correct the temporal variations of these environmental variables, transforming the data so that such observations are independent of the time spent during the measurement. The proposed method approached values recorded with time delays to those expected at the exact moment of interest, if the data were measured simultaneously at the moment at all points distributed spatially. The correction model for numerical environmental variables was validated for environmental air temperature parameter, and the values corrected by the method did not differ by Tukey's test at 5% significance of real values recorded by data loggers.