On-screen pre-deblurring of digital images using the wavefront aberration function of the human eye to improve computer access for the visually impaired

Traditional Optics has provided ways to compensate some common visual limitations (up to second order visual impairments) through spectacles or contact lenses. Recent developments in wavefront science make it possible to obtain an accurate model of the Point Spread Function (PSF) of the human eye. Through what is known as the "Wavefront Aberration Function" of the human eye, exact knowledge of the optical aberration of the human eye is possible, allowing a mathematical model of the PSF to be obtained. This model could be used to pre-compensate (inverse-filter) the images displayed on computer screens in order to counter the distortion in the user's eye. This project takes advantage of the fact that the wavefront aberration function, commonly expressed as a Zernike polynomial, can be generated from the ophthalmic prescription used to fit spectacles to a person. This allows the pre-compensation, or onscreen deblurring, to be done for various visual impairments, up to second order (commonly known as myopia, hyperopia, or astigmatism). The technique proposed towards that goal and results obtained using a lens, for which the PSF is known, that is introduced into the visual path of subjects without visual impairment will be presented. In addition to substituting the effect of spectacles or contact lenses in correcting the loworder visual limitations of the viewer, the significance of this approach is that it has the potential to address higher-order abnormalities in the eye, currently not correctable by simple means.

Metrópole digital: o jovem aprendiz na educação tecnológica

This thesis was elaborated in the scenario of Digital Metropolis Institute (IMD) – a supplementary unit at the Federal University of Rio Grande do Norte in the training of personnel with technical and higher level courses whose technical level training is associated with a process of digital inclusion, with the purpose of attracting young people to this area, with emphasis on Software and Hardware Development. It aims to investigate the cognitive change of young apprentice on technological education and his/her entrance into the labor market, through the formation and the social inclusion proposed by the Instituto Metrópole Digital; understanding the juvenile subjectivity production through the Instituto Metrópole Digital’s education by performance in the labor market; recognizing the Brazilian professional qualification public policies for youth and identifying the role of Tutoring in the learning process during the course of formation of the young apprentice of the technological education proposed by the Instituto Metrópole Digital.The clipping of the object of investigation was the process of cognitive change and constitution of subjectivity of the young apprentice in information technology (IT) in the IMD. It was searched support in theory Freireana as proposal that problematizes the policies and the process of formation and professional qualification, in the perspective of a citizen and liberating consciousness. By qualitative and ethnographic nature, descriptive-explanatory, it counts with the participation of young people, high school students from public and private schools, aged between 15 and 18 years. There are strong aspects: a cognitive change on the young apprentice of technological education onto overdrive high school as the student of the Instituto Metrópole Digital; it happened the social integration for those who remain in the course, both in the neighborhood where they reside and at school where he attended high school, the young man is recognized and becomes reference to other young, favoring him a life projection which when the activities of mentoring is learning motivator, it exerts a positive influence to the young on the continuity of studies, it provides intellectual and institutional affiliation and continuity in the investments to the academic life for a better insertion in the labor market, which refers to the modification of the life project-invest in academic training, in exchange for a technical job in the labor market. There are weak aspects: the absence of professor in the course, in his most important role, which involves awareness of his/her condition in action, in explicit position that the professional practice constitutes as this constitution requires reciprocity of its students and the context in which it operates; fragile formation of mentoring, absence of dialogues in the classroom that favors the formation of subject learning, mainly in guiding action, mediator of the young; There is a lack of methodological proposal to develop real projects on the labor market with problem solving and collaborative learning. It considers that without converting information into knowledge cannot discern clearly enough that there is no direct causal relationship between Professional and technological Education and the level of employability of the young worker certificate. It suggests to the evasion: a greater knowledge of the reality of the student of the Institute Metropolis Digital; better knowledge of youth and their expectations of life project; the Tutoring will be Teacher-tutor; investing in employability conditions effective the young into the labor market.

A stereo-image analysis JAVA software with links to executable and source code

Scientists planning to use underwater stereoscopic image technologies are often faced with numerous problems during the methodological implementations: commercial equipment is too expensive; the setup or calibration is too complex; or the imaging processing (i.e. measuring objects in the stereo-images) is too complicated to be performed without a time-consuming phase of training and evaluation. The present paper addresses some of these problems and describes a workflow for stereoscopic measurements for marine biologists. It also provides instructions on how to assemble an underwater stereo-photographic system with two digital consumer cameras and gives step-by-step guidelines for setting up the hardware. The second part details a software procedure to correct stereo-image pairs for lens distortions, which is especially important when using cameras with non-calibrated optical units. The final part presents a guide to the process of measuring the lengths (or distances) of objects in stereoscopic image pairs. To reveal the applicability and the restrictions of the described systems and to test the effects of different types of camera (a compact camera and an SLR type), experiments were performed to determine the precision and accuracy of two generic stereo-imaging units: a diver-operated system based on two Olympus Mju 1030SW compact cameras and a cable-connected observatory system based on two Canon 1100D SLR cameras. In the simplest setup without any correction for lens distortion, the low-budget Olympus Mju 1030SW system achieved mean accuracy errors (percentage deviation of a measurement from the object's real size) between 10.2 and -7.6% (overall mean value: -0.6%), depending on the size, orientation and distance of the measured object from the camera. With the single lens reflex (SLR) system, very similar values between 10.1% and -3.4% (overall mean value: -1.2%) were observed. Correction of the lens distortion significantly improved the mean accuracy errors of either system. Even more, system precision (spread of the accuracy) improved significantly in both systems. Neither the use of a wide-angle converter nor multiple reassembly of the system had a significant negative effect on the results. The study shows that underwater stereophotography, independent of the system, has a high potential for robust and non-destructive in situ sampling and can be used without prior specialist training.

Digital geometric-sequence control technique for bidirectional dual active bridge DC-DC converters used in future electric vehicles

Bidirectional DC-DC converters are widely used in different applications such as energy storage systems, Electric Vehicles (EVs), UPS, etc. In particular, future EVs require bidirectional power flow in order to integrate energy storage units into smart grids. These bidirectional power converters provide Grid to Vehicle (V2G)/ Vehicle to Grid (G2V) power flow capability for future EVs. Generally, there are two control loops used for bidirectional DC-DC converters: The inner current loop and The outer loop. The control of DAB converters used in EVs are proved to be challenging due to the wide range of operating conditions and non-linear behavior of the converter. In this thesis, the precise mathematical model of the converter is derived and non-linear control schemes are proposed for the control system of bidirectional DC-DC converters based on the derived model. The proposed inner current control technique is developed based on a novel Geometric-Sequence Control (GSC) approach. The proposed control technique offers significantly improved performance as compared to one for conventional control approaches. The proposed technique utilizes a simple control algorithm which saves on the computational resources. Therefore, it has higher reliability, which is essential in this application. Although, the proposed control technique is based on the mathematical model of the converter, its robustness against parameter uncertainties is proven. Three different control modes for charging the traction batteries in EVs are investigated in this thesis: the voltage mode control, the current mode control, and the power mode control. The outer loop control is determined by each of the three control modes. The structure of the outer control loop provides the current reference for the inner current loop. Comprehensive computer simulations have been conducted in order to evaluate the performance of the proposed control methods. In addition, the proposed control have been verified on a 3.3 kW experimental prototype. Simulation and experimental results show the superior performance of the proposed control techniques over the conventional ones.

How to map the diversity of the audiovisual industry in the digital era. A Methodological Proposition

This article presents a methodological proposition to map the diversity of the audiovisual industry in the digital scenario by portraying the most important interactions between those who create, produce, distribute and disseminate audiovisual productions on line, paying special attention to powerful intermediaries and to small and medium independent agents. Taking as a point of departure a flexible understanding of social network analysis, the aim is to understand the structure of the audiovisual industry on the internet so that, taking into consideration a given sector, agents, their relations and the networks they give place to – as well as the structural conditions under which they operate – are studied. The aim is to answer questions such as: what is mapping, what is of interesting to map, how can it be done and what advantages and disadvantages the results will present.

Monitoring sandy shores morphologies by DGPS: a practical tool to generate digital elevation models

The highly dynamic nature of some sandy shores with continuous morphological changes require the development of efficient and accurate methodological strategies for coastal hazard assessment and morphodynamic characterisation. During the past decades, the general methodological approach for the establishment of coastal monitoring programmes was based on photogrammetry or classical geodetic techniques. With the advent of new geodetic techniques, space-based and airborne-based, new methodologies were introduced in coastal monitoring programmes. This paper describes the development of a monitoring prototype that is based on the use of global positioning system (GPS). The prototype has a GPS multiantenna mounted on a fast surveying platform, a land vehicle appropriate for driving in the sand (four-wheel quad). This system was conceived to perform a network of shore profiles in sandy shores stretches (subaerial beach) that extend for several kilometres from which high-precision digital elevation models can be generated. An analysis of the accuracy and precision of some differential GPS kinematic methodologies is presented. The development of an adequate survey methodology is the first step in morphodynamic shore characterisation or in coastal hazard assessment. The sample method and the computational interpolation procedures are important steps for producing reliable three-dimensional surface maps that are real as possible. The quality of several interpolation methods used to generate grids was tested in areas where there were data gaps. The results obtained allow us to conclude that with the developed survey methodology, it is possible to Survey sandy shores stretches, under spatial scales of kilometers, with a vertical accuracy of greater than 0.10 m in the final digital elevation models.

SMEs Attitudes to “Information Assurance” and Consequences for the Digital Single Market

It is now generally accepted that cyber crime represents a big threat to organisations, and that they need to take appropriate action to protect their valuable information assets. However, current research shows that, although small businesses understand that they are potentially vulnerable, many are still not taking sufficient action to counteract the threat. Last year, the authors sought, through a more generalised but categorised attitudinal study, to explore the reasons why smaller SMEs in particular were reluctant to engage with accepted principles for protecting their data. The results showed that SMEs understood many of the issues. They were prepared to spend more but were particularly suspicious about spending on information assurance. The authors’ current research again focuses on SME attitudes but this time the survey asks only questions directly relating to information assurance and the standards available, in an attempt to try to understand exactly what is causing them to shy away from getting the badge or certificate that would demonstrate to customers and business partners that they take cyber security seriously. As with last year’s study, the results and analysis provide useful pointers towards the broader business environment changes that might cause SMEs to be more interested in working towards an appropriate cyber security standard.

Modulateurs intégrés sur silicium pour la transmission de signaux à modulation d'amplitude multi-niveau

Au cours des dernières années, la photonique intégrée sur silicium a progressé rapidement. Les modulateurs issus de cette technologie présentent des caractéristiques potentiellement intéressantes pour les systèmes de communication à courte portée. En effet, il est prévu que ces modulateurs pourront être opérés à des vitesses de transmission élevées, tout en limitant le coût de fabrication et la consommation de puissance. Parallèlement, la modulation d’amplitude multi-niveau (PAM) est prometteuse pour ce type de systèmes. Ainsi, ce travail porte sur le développement de modulateurs de silicium pour la transmission de signaux PAM. Dans le premier chapitre, les concepts théoriques nécessaires à la conception de modulateurs de silicium sont présentés. Les modulateurs Mach-Zehnder et les modulateurs à base de réseau de Bragg sont principalement abordés. De plus, les effets électro-optiques dans le silicium, la modulation PAM, les différents types d’électrodes intégrées et la compensation des distorsions par traitement du signal sont détaillés.Dans le deuxième chapitre, un modulateur Mach-Zehnder aux électrodes segmentées est présenté. La segmentation des électrodes permet la génération de signaux optiques PAM à partir de séquences binaires. Cette approche permet d’éliminer l’utilisation de convertisseur numérique-analogique en intégrant cette fonction dans le domaine optique, ce qui vise à réduire le coût du système de communication. Ce chapitre contient la description détaillée du modulateur, les résultats de caractérisation optique et de la caractérisation électrique, ainsi que les tests systèmes. De plus, les tests systèmes incluent l’utilisation de pré-compensation ou de post-compensation du signal sous la forme d’égalisation de la réponse en fréquence pour les formats de modulation PAM-4 et PAM-8 à différents taux binaires. Une vitesse de transmission de 30 Gb/s est démontrée dans les deux cas et ce malgré une limitation importante de la réponse en fréquence suite à l’ajout d’un assemblage des circuits radiofréquences (largeur de bande 3 dB de 8 GHz). Il s’agit de la première démonstration de modulation PAM-8 à l’aide d’un modulateur Mach-Zehnder aux électrodes segmentées. Finalement, les conclusions tirées de ce travail ont mené à la conception d’un deuxième modulateur Mach-Zehnder aux électrodes segmentées présentement en phase de test, dont les performances montrent un très grand potentiel. Dans le troisième chapitre, un modulateur à réseau de Bragg à deux sauts de phase est présenté. L’utilisation de réseaux de Bragg est une approche encore peu développée pour la modulation. En effet, la réponse spectrale de ces structures peut être contrôlée précisément, une caractéristique intéressante pour la conception de modulateurs. Dans ces travaux, nous proposons l’ajout de deux sauts de phase à un réseau de Bragg uniforme pour obtenir un pic de transmission dans la bande de réflexion de celui-ci. Ainsi, il est possible d’altérer l’amplitude du pic de transmission à l’aide d’une jonction pn. Comme pour le deuxième chapitre, ce chapitre inclut la description détaillée du modulateur, les résultats des caractérisations optique et électrique, ainsi que les tests systèmes. De plus, la caractérisation de jonctions pn à l’aide du modulateur à réseau de Bragg est expliquée. Des vitesses de transmission PAM-4 de 60 Gb/s et OOK de 55 Gb/s sont démontrées après la compensation des distorsions des signaux. À notre connaissance, il s’agit du modulateur à réseau de Bragg le plus rapide à ce jour. De plus, pour la première fois, les performances d’un tel modulateur s’approchent de celles des modulateurs de silicium les plus rapides utilisant des microrésonateurs en anneau ou des interféromètres Mach-Zehnder.

‘Probing with the prototype’: using a prototype e-participation platform as a digital cultural probe to investigate youth engagement with the environment

This study describes how we used a prototype e-participation plat-form as a digital cultural probe to investigate youth motivation and engagement strategies. This is a novel way of considering digital cultural probes which can contribute to the better creation of e-participation platforms. This probe has been conducted as part of the research project STEP which aims at creating an e-participation platform to engage young European Citizens in environmental decision making. Our probe technique has given an insight into the environ-mental issues concerning young people across Europe as well as possible strat-egies for encouraging participation. How the e-participation platform can be utilised to support youth engagement through opportunities for social interac-tion and leadership is discussed. This study leads to a better understanding of how young people can co-operate with each other to provide collective intelli-gence and how this knowledge could contribute to effective e-participation of young people.