While the crisis proceeds: A world redistribution of economic power?

The crisis has drawn attention to the fact that not only emerging powers but other regions of the world as well may be offering different development models and may constitute into alternative, in some dimensions more positive agents, in the conduct of the present stage of globalisation. Notwithstanding, the traditional western powers have not lost a large amount of control of the world economy. And the crisis proceeds, reallocating world power as in a Hobbesian anarchy. It is difficult to foresee smooth developments in the near future. On the contrary, multilateralism seems to be losing ground to unilateral action or bilateral arrangements. More or less disguised currency wars may lead to serious disequilibria, and turf wars may become more frequent, with motives ranging from securing captive markets to control of specific commodities and energy goods, or targeted regulatory frameworks. As economic policy becomes even more involved with defence and security affairs, the feedbacks from each side to the other seem likely to keep dissent and animosity high, rather than contributing to peaceful and constructive approaches. A more trouble-prone world may be easily expected.

Use of swine waste-derived biogas to enhance microalgae productivity.

The effects of swine wastewater-derived biogas on microalgae productivity were determined. Experiments were conducted in a closed photobioreactor containing digestate effluent as culturing media and biogas in the headspaceas source of CO2. Experiments were carried out under mixothrophic and autothrophic conditions. Results showed that autotrophic growth rate (0.6 d-1)was twofoldfaster than mixotrophic. Frequent reinjections of biogas containing up to 2,000 ppm of hydrogen sulfide was not inhibitory to microalgae growth. The rapid removal of H2S in the system suggests photobioreactors can be an interesting alternative to biogas purification. A model to estimate microalgae productivity based on the amount of available CO2, inorganic and organic carbon was developedand showed good data fit correlation (r²= 0.99).

Smart macroporous structures for the purification of viral particles

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Capillaria hepatica-induced hepatic fibrosis in rats: paradoxical effect of repeated infections

Multiple exposures to parasitic agents are considered an important factor in the genesis of the most severe forms of the diseases they cause. Capillaria hepatica-induced septal fibrosis of the liver in rats usually runs without signs of portal hypertension or hepatic failure. After determining the hepatic profile of 15 animals during the course of a single infection, we submitted 20 rats to multiple Capillaria hepatica infections to determine whether repeated exposures would augment fibrosis production, transforming septal hepatic fibrosis into a true cirrhosis. Ten single-infection rats served as controls. A total of 5 exposures, with 45-day intervals, were made. Histological changes were followed by means of surgical liver biopsies, collected prior to infection and to each re-infection. Functional changes were minimal and transient. Although a slight recrudescence of fibrosis was observed after the first two re-infections and when the single-infected control group was re-infected at the end of the experiment, subsequent re-infections failed to increase the amount of fibrosis. On the contrary, there occurred quantitative and qualitative evidence of collagen degradation and suppression of parasite development. These paradoxical results are in keeping with the hypothesis that a complex immunological modulation participates in the mechanism of hepatic fibrosis induced by Capillaria hepatica infection in rats.

Data fusion with computational intelligence techniques: a case study of fuzzy inference for terrain assessment

Dissertação apresentada para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores, pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

Functional and structural studies of a mini-ferritin protein

Dissertação para obtenção do Grau de Mestre em Bioquímica

Exploratory analysis of OpenStreetMap for land use classification

In the last years, volunteers have been contributing massively to what we know nowadays as Volunteered Geographic Information. This huge amount of data might be hiding a vast geographical richness and therefore research needs to be conducted to explore their potential and use it in the solution of real world problems. In this study we conduct an exploratory analysis of data from the OpenStreetMap initiative. Using the Corine Land Cover database as reference and continental Portugal as the study area, we establish a possible correspondence between both classification nomenclatures, evaluate the quality of OpenStreetMap polygon features classification against Corine Land Cover classes from level 1 nomenclature, and analyze the spatial distribution of OpenStreetMap classes over continental Portugal. A global classification accuracy around 76% and interesting coverage areas’ values are remarkable and promising results that encourages us for future research on this topic.

Development and efficiency optimizing of the human body energy converters

Nowadays it is known that the human body is continuous source of many types of energy and the devices used for collecting energy taken from the environment also have the required capabilities for the collection of the energy produced by the Human body (HB), but very limited and with very low efficiency. Low power and high yield converters are particularly needed in these cases of collecting energy from human activity and its movements due to the small amount of energy generated this way. But this situation can be improved. Enhancing or focusing the human movements by using mechanical amplifiers applied to the piezoelectric element. By doing so the input of energy in the element increases. As such increasing its output, therefore producing more energy.

Perspectives of Identity in Julio Cortázar’s Rayuela

My aim was to produce a dissertation, based on Rayuela, which focuses on Cortázar’s questioning of identity. With this objective in mind, I have studied some of the salient elements in the novel that relate to this topic and the subsequent, interrelated, areas of study that arose in doing so. The cities of Paris and Buenos Aires are placed in contrast within the novel and reflect a dichotomy that reflects Oliveira’s condition as a “foreigner,” (more specifically as a South American in Europe). This duality is further reflected in Cortázar’s use of gender, and the development of the notions of active and passive, and an investigation into the traditional modes of thought, symbols, and stereotypes, and an open-ended questioning of their validity. These topics are framed by a notion of Judeo-Christian History that is in many ways flawed and, as such, contrasts with a more intuitive (or “oriental”) perception of reality, which is centred in figures such as la Maga. I found many explicit references to Zen philosophy, and related oriental references, that led me to believe that this area was worthy of further investigation. Rayuela is considered a classic novel within the canon of Spanish language literature. It’s famous “tabla,” like the rules for a game between the writer and the receptor that produce alternative readings, has led to many discussions regarding the novel’s structure and form, and also created a certain amount of polemic with the use of concepts such as the “lector hembra.” Many consider Cortázar a greater short story writer than a novelist, but nevertheless this novel had a profound effect on young readers upon its publication, much to Cortázar’s surprise, and continues to attract readers, dealing as it does with issues that continue to be relevant to many people.

Cohesion decay: quantitative analysis of partial sister chromatid cohesion

Cell division is a highly dynamic process where sister chromatids remain associated with each other from the moment of DNA replication until the later stages of mitosis, giving rise to two daughter cells with equal genomes. The “molecular glue” that links sister DNA molecules is called cohesin, a tripartite ring-like protein complex composed of two Structural Maintenance of Chromosome proteins (Smc1 and Smc3) bridged by a kleisin subunit Rad21/Scc1, that together prevent precocious sister chromatid separation. Accumulating evidence has suggested that cohesion decay may be the cause of segregation errors that underlie certain human pathologies. However it remains to be determined how much cohesin loss abolishes functional sister chromatid cohesion. To answer these questions, we have developed different experimental conditions aiming to titrate the levels of cohesin on mitotic chromosomes in a precise manner. Using these tools, we will determine the minimal amount of cohesin needed to confer functional cohesion. The approaches described here take advantage of a system in Drosophila melanogaster where the Tobacco Etch Virus (TEV) protease can cleave the Rad21 subunit of cohesin leading to precocious sister chromatid separation. Firstly, we tried to express different levels of TEV protease to obtain partial loss of cohesion. However, this approach has failed to produce systematic different levels of sister chromatid separation. Most of the work was therefore focused on a second strategy, for which we established strains with different levels of cohesin sensitive/cohesin resistant to TEV protease. Strains containing different amounts of functional cohesin (TEV resistant) were tested by in vitro cleavage and by in vivo injections in embryos for their ability to promote sister chromatid cohesion. Our results reveal that removal of half of the cohesin complexes does not impair chromosome segregation, implying that chromosome cohesion is less sensitive to cohesin amounts than previously anticipated.

Exposição profissional ao chumbo : análise da indução de efeitos genotóxicos

RESUMO - A exposição contínua a substâncias químicas tem consequências para a saúde humana, algumas das quais não estão ainda totalmente estabelecidas. A toxicologia ocupacional é uma área interdisciplinar que envolve conhecimentos de higiene e de medicina ocupacional, de epidemiologia e de toxicologia e que tem por principal objectivo prevenir a ocorrência de efeitos adversos decorrentes do ambiente ocupacional sendo um dos seus principais papéis fornecer o máximo de dados que possam contribuir para o conhecimento dos potenciais efeitos na saúde. O chumbo é um tóxico de características cumulativas que provoca na saúde efeitos principalmente sistémicos, ou seja, o efeito tóxico manifesta-se em locais afastados do contacto inicial que resultam essencialmente de exposições crónicas, resultantes de períodos de exposição mais ou menos longos ao metal (entre meses e anos). Pode interagir com diferentes órgãos e tecidos, ligando-se a moléculas e constituintes celulares. Uma vez que não possui qualquer função fisiológica, a presença do chumbo no organismo humano resulta numa série de efeitos prejudiciais que afectam diversos órgãos e sistemas. A toxicidade do chumbo manifesta-se em diversos órgãos e tecidos, nomeadamente no sistema hematopoiético, no sistema nervoso, no rim, no aparelho reprodutor, no sistema cardiovascular, no sistema endócrino e no sistema imunitário. Da interferência do chumbo com o funcionamento de alguns sistemas biológicos resultam um conjunto de alterações fundamentais ao nível dos processos de transporte através das membranas, da integridade estrutural e funcional das enzimas e de várias vias metabólicas, em especial da fosforilação oxidativa e da síntese do heme sendo os primeiros efeitos bioquímicos do chumbo detectados a partir de valores de plumbémia inferiores a 10 μg/dL. As medidas de higiene e segurança actualmente em vigor nos países desenvolvidos asseguram que os casos de intoxicação grave são cada vez menos frequentes. No entanto, o risco de exposição a nível ocupacional existe em todas as actividades que envolvem materiais que o contenham como as explorações mineiras, as fundições primária e secundária, a produção de baterias de chumbo ácido, a produção de vidro com pigmentos de chumbo, as soldaduras de reparação automóvel e a instrução de tiro. Desde 2006 o chumbo é considerado pela International Agency for Research on Cancer (IARC) uma substância carcinogénica do grupo 2A (provável carcinogénio para o ser humano). Considera-se, assim, que o chumbo tem, inequivocamente, capacidade de induzir cancro em animais experimentais mas que, embora haja fortes indícios de que os mecanismos que medeiam a carcinogénese desses compostos ocorrem no ser humano, os dados disponíveis ainda não podem assegurar essa relação. Com este estudo pretendeu-se contribuir para o conhecimento da toxicidade do chumbo através do estudo da exposição ao chumbo e da influência da susceptibilidade individual (em industrias sem co-exposição significativa a outros agentes conhecidos ou suspeitos de serem carcinogénicos). Pretendeu-se estudar o caso através de uma abordagem múltipla que permitisse relacionar diferentes tipos de marcadores biológicos uma vez que a monitorização biológica integra todas as possíveis vias de entrada no organismo (para além da via respiratória), eventuais exposições fora do contexto estritamente profissional assim como uma série de factores intrínsecos individuais (relacionados com modos de via, de natureza fisiológica e comportamentais). Sendo a co-exposição a outros compostos com propriedades genotóxicas e carcinogénicas uma questão difícil de tornear quando se quer avaliar o potencial genotóxico do chumbo em populações expostas, ocupacional ou ambientalmente este estudo tem a vantagem de ter sido efectuado em populações sem co-exposição conhecida a outras substâncias deste tipo, permitindo concluir sobre os efeitos resultantes apenas da exposição a chumbo na população humana, contribuindo para explicar algumas das aparentes inconsistências e contradições entre diferentes estudos sobre este tema. Os indicadores de exposição usados foram: indicadores de dose interna (doseamento de chumbo e de PPZ no sangue), indicadores de efeitos adversos no heme e genotóxicos (actividade da ALAD, teste do cometa e mutação em TCR) e indicadores de susceptibilidade (polimorfismos genéticos de ALAD e VDR) através de uma abordagem estatística de comparação directa de sub-grupos previamente definidos na população e da aplicação de um modelo de regressão múltipla. Este estudo revelou que os níveis de plumbémia na população portuguesa baixaram significativamente nos últimos 10 anos, tanto na população ocupacionalmente exposta como na população em geral e que a presença do genótipo B-B (do gene VDR) é preditiva das variações de plumbémia, quando comparada com o genótipo mais frequente na população, B-b; ao contrário, o genótipo b-b não aparenta ter influência em nenhum dos marcadores estudados. No que diz respeito a efeitos genotóxicos concluiu-se que estes não se manifestaram na população estudada, levando a concluir que nos níveis de exposição estudados, o chumbo não tem capacidade de induzir este tipo de efeitos per si levando ao reforço da hipótese, já levantada por outros autores, de que o mecanismo de genotoxicidade do chumbo seja essencialmente de promoção de processos de genotoxicidade desencadeados por outros agentes. A realização de estudos de efeitos genotóxicos e de stress oxidativo desenhados de forma a comparar grupos de trabalhadores expostos apenas a chumbo com grupos de trabalhadores com o mesmo nível de exposição a chumbo, mas com co-exposição a outros agentes reconhecidamente carcinogénicos poderá ajudar a aumentar o conhecimento deste efeito do chumbo na saúde humana.

Enrichment of a PHA producing microbial community in a continuous bioreactor setup

Polyhydroxyalkanoates (PHAs) are biosynthetic polyesters, biodegradable and biocompatible making them of great interest for industrial purposes. The use of low value substrates with mixed microbial communities (MMC) is a strategy currently used to decrease the elevated PHA production costs. PHA production process requires an important step for selection and enrichment of PHA-storing microorganisms which is usually carried out in a Sequencing Batch Reactor (SBR). The aim of this study was to optimize the PHA accumulating culture selection stage using a 2-stage Continuous Stirrer Tank Reactor (CSTR) system. The system was composed by two separate feast and famine bioreactors operated continuously, mimicking the feast and famine phases in a SBR system. Acetate was used as carbon source and biomass seed was highly enriched in Plasticicumulans acidivorans obtained from activated sludge. The system was operated under two different sets of conditions (setup 1 and 2), maintaining a system total retention time of 12 hours and an OLR of 2.25 Cmmol/L.h-1. An average PHB-content of 3.3 % wt was obtained in setup 1 and 4.8% wt in setup 2. Several other experiments were performed in order to better understand the continuous system behaviour, using biomass from the continuous system. With the fed-batch experiment a maximum of 8.1% PHB was stored and the maximum substrate uptake and specific growth rates obtained in the growth experiment (1.15 Cmol Cmol-1.h-1 and 0.53 Cmol Cmol-1.h-1) were close to the ones from continuous system (1.12 Cmol Cmol-1.h-1 and 0.59 Cmol Cmol-1.h-1). The microbial community was characterized trough microscopic visualization, Denaturing Gradient Gel Electrophoresis (DGGE) analysis and Fluorescent in situ hybridization (FISH). The last studied performed mimicked the continuous system by building up a SBR system with all the same operational conditions while adding an extra acetate dosage during the 12 h cycle, simulating the substrate passing from the feast to the famine reactors under continuous operation. It was shown that possibly the continuous system was not able to efficiently select for PHB storing organisms under the operational conditions imposed, although the selected culture was capable of consuming the substrate and grow fast. This main conclusion might have resulted from two major factors affecting the system performance: the ammonium concentration in the Feast reactor and the amount of substrate leaching from the Feast to the Famine reactor.

Application of geographic information system and modelling in health impact assessment for urban road mobility in Vietnam

Transport is an essential sector in modern societies. It connects economic sectors and industries. Next to its contribution to economic development and social interconnection, it also causes adverse impacts on the environment and results in health hazards. Transport is a major source of ground air pollution, especially in urban areas, and therefore contributing to the health problems, such as cardiovascular and respiratory diseases, cancer, and physical injuries. This thesis presents the results of a health risk assessment that quantifies the mortality and the diseases associated with particulate matter pollution resulting from urban road transport in Hai Phong City, Vietnam. The focus is on the integration of modelling and GIS approaches in the exposure analysis to increase the accuracy of the assessment and to produce timely and consistent assessment results. The modelling was done to estimate traffic conditions and concentrations of particulate matters based on geo-references data. A simplified health risk assessment was also done for Ha Noi based on monitoring data that allows a comparison of the results between the two cases. The results of the case studies show that health risk assessment based on modelling data can provide a much more detail results and allows assessing health impacts of different mobility development options at micro level. The use of modeling and GIS as a common platform for the integration of different assessments (environmental, health, socio-economic, etc.) provides various strengths, especially in capitalising on the available data stored in different units and forms and allows handling large amount of data. The use of models and GIS in a health risk assessment, from a decision making point of view, can reduce the processing/waiting time while providing a view at different scales: from micro scale (sections of a city) to a macro scale. It also helps visualising the links between air quality and health outcomes which is useful discussing different development options. However, a number of improvements can be made to further advance the integration. An improved integration programme of the data will facilitate the application of integrated models in policy-making. Data on mobility survey, environmental monitoring and measuring must be standardised and legalised. Various traffic models, together with emission and dispersion models, should be tested and more attention should be given to their uncertainty and sensitivity

Analysis of temporal and spatial variations of forest. A case of study in notheastern Armenia

The forest has a crucial ecological role and the continuous forest loss can cause colossal effects on the environment. As Armenia is one of the low forest covered countries in the world, this problem is more critical. Continuous forest disturbances mainly caused by illegal logging started from the early 1990s had a huge damage on the forest ecosystem by decreasing the forest productivity and making more areas vulnerable to erosion. Another aspect of the Armenian forest is the lack of continuous monitoring and absence of accurate estimation of the level of cuts in some years. In order to have insight about the forest and the disturbances in the long period of time we used Landsat TM/ETM + images. Google Earth Engine JavaScript API was used, which is an online tool enabling the access and analysis of a great amount of satellite imagery. To overcome the data availability problem caused by the gap in the Landsat series in 1988- 1998, extensive cloud cover in the study area and the missing scan lines, we used pixel based compositing for the temporal window of leaf on vegetation (June-late September). Subsequently, pixel based linear regression analyses were performed. Vegetation indices derived from the 10 biannual composites for the years 1984-2014 were used for trend analysis. In order to derive the disturbances only in forests, forest cover layer was aggregated and the original composites were masked. It has been found, that around 23% of forests were disturbed during the study period.

Analysis and visualization of energy use for university campus

The reduction of greenhouse gas emissions is one of the big global challenges for the next decades due to its severe impact on the atmosphere that leads to a change in the climate and other environmental factors. One of the main sources of greenhouse gas is energy consumption, therefore a number of initiatives and calls for awareness and sustainability in energy use are issued among different types of institutional and organizations. The European Council adopted in 2007 energy and climate change objectives for 20% improvement until 2020. All European countries are required to use energy with more efficiency. Several steps could be conducted for energy reduction: understanding the buildings behavior through time, revealing the factors that influence the consumption, applying the right measurement for reduction and sustainability, visualizing the hidden connection between our daily habits impacts on the natural world and promoting to more sustainable life. Researchers have suggested that feedback visualization can effectively encourage conservation with energy reduction rate of 18%. Furthermore, researchers have contributed to the identification process of a set of factors which are very likely to influence consumption. Such as occupancy level, occupants behavior, environmental conditions, building thermal envelope, climate zones, etc. Nowadays, the amount of energy consumption at the university campuses are huge and it needs great effort to meet the reduction requested by European Council as well as the cost reduction. Thus, the present study was performed on the university buildings as a use case to: a. Investigate the most dynamic influence factors on energy consumption in campus; b. Implement prediction model for electricity consumption using different techniques, such as the traditional regression way and the alternative machine learning techniques; and c. Assist energy management by providing a real time energy feedback and visualization in campus for more awareness and better decision making. This methodology is implemented to the use case of University Jaume I (UJI), located in Castellon, Spain.