853 resultados para Aesthetics antinomy
Resumo:
Patients with Class II division 2 malocclusion and mandibular retrusion have limited treatment options after the growth peak, such as surgical-orthodontic treatment or mandibular advancement devices. Among bite-jumping devices, the Herbst appliance allows greater increase of mandibular growth since it does not require patient compliance and allows continuous use. This case report presents the treatment of a Class II division 2 malocclusion in a patient after growth peak, performed in two stages. The first stage included the upper incisors proclination and overjet increase with multibracket appliance to benefit next stage. The second stage involved mandibular advancement using Herbst appliance aiming to correct the Class II molar relationship. The treatment resulted in a stable occlusion with periodontal health, normal functions and facial aesthetics improvement. Dental and skeletal changes arising from treatment could be assessed by cephalometric analysis and superimposition of pretreatment and post-treatment cephalometric tracings. Antero-posterior discrepancy was corrected by means of dental movement as well as by mandibular growth increment stimulated by the Herbst appliance.
Resumo:
The early malocclusion treatment has increased interest of orthodontic community. Among these is the serial extraction that harmonizes the differences between the amount of dental material and permanent deficiency of supporting bone. The technique is applied in mixed dentition through a predetermined sequence of extractions between deciduous and permanent teeth, in order to reach spontaneous immediately alignment of remaining permanent teeth with a minimum orthodontic mechanics. It will be reported a case where the serial extraction was performed in a growing patient with biprotrusion, Class I malocclusion and severe crowding. All functional and aesthetics goals were reached.
Resumo:
The correction of a Class III malocclusion in adult patients is one of the major challenges in orthodontics due to facial deformities occurring during the unfavorable growth of this kind of pattern, as well as the treatment options capable of producing facial changes aesthetically acceptable and adequate for today's beauty standards. One acceptable alternative treatment is the removal of a lower incisor. For a Class III correction through a lower incisor extraction a thorough analysis and planning must be carried out by taking into consideration the amount of overjet and overbite, periodontal condition of the teeth and the possibility of obtaining a good dental occlusion with acceptable facial aesthetics. Will be presented two case reports of patients presenting an anteroinferior crowding, Class III malocclusion condition. The treatment through a lower incisor extraction and the reasons why this treatment was adopted will be discussed.
Resumo:
The non-eruption of teeth due to highly keratinized gingival mucosa is a frequent event in the pediatric dentistry, which harms the oral aesthetics and function. A surgical excision of the involved area is indicated, exposing the non-erupted tooth. This procedure involves anesthesia and cutting instruments that may increase the fear and anxiety in young patients. The use of new technologies has avoided these instruments and has promoted more comfort to the patients. This study presents clinical cases in which gingivectomy was performed using the innovative method with an ultrasound-activated CVD tip. It was concluded that this method presented effectiveness, promoted more comfort, and less fear to the patients, making its use a viable alternative to pediatric surgery.
Resumo:
The primary teeth are essential for bone development and establishment of the arches on occlusion. Thus, the congenitally absence of teeth may trigger a shift in the balance of the occlusion, promoting disharmony in the structures of the maxilla-mandibular system. However, some interventions are possible to be performed in these cases even in pediatric patients, to redirect growth, preventing growth deviations and reestablishing the aesthetic. The aim of this paper is to report the treatment of a 4-year-old child presenting congenitally absence of mandibular central and lateral incisors and maxilla lateral incisors, which consequently compromises aesthetics, occlusal function, and the development and the functional growth of the bones. The oral rehabilitation was performed with an adhesive partial denture, which was able to restore the aesthetic and the occlusal function, therefore being a viable alternative in the treatment of this patient of little age.
Resumo:
Periodontal therapy has undergone significant changes in recent decades. While in the past the only goal was to restore gingival health, with no concern about the possible consequences of the disease treatment, currently the procedures are performed in a less invasive manner, to maintain aesthetic periodontal results or even recover them. Gingival recession is an alteration frequently found in patients and may be a complaint for causing various complications. For their treatment, several surgical techniques are reported in the literature. The techniques that are more predictable are those that associate a subepithelial connective tissue graft and a coronally repositioned flap. The original technique consists in performing two vertical incisions for an extensive release of the flap and its stabilization in a coronal position. Although this procedure is extremely widespread in the literature, the search for less invasive surgeries without the use of vertical incisions are the current aim of periodontal plastic surgeries, since they present several advantages. The aim of this paper is to demonstrate a case where adjacent, deep and multiple recessions were present resulting in aesthetic problems, which was resolved by a less invasive approach using a surgical technique in envelope and a subepithelial connective tissue graft.
Resumo:
Several periodontal procedures have been described in the literature to correct mucogingival alterations or to achieve root coverage. The epithelized free gingival graft is a well established periodontal surgery to increase the width of keratinized gingiva with good stability in the long term follow up. However, this procedure is not commonly used in aesthetic areas since the grafted tissue presents differences of color and contrast. The free connective tissue graft emerges as a viable option to increase attached gingiva in areas where aesthetics results are required. The removal of an epithelized free gingival graft from the hard palate region creates a sore and raw surgical wound that slowly repairs, while the connective tissue graft produces only a line of incision that can be easily sutured promoting a more confortable outcome for the patient. This paper aims to report a case where a free connective tissue graft was used to increase the width of attached gingiva in a tooth with gingival recession. This technique presented satisfactory esthetics results, with a better contrast and color matching with the surrounding tissues.
Resumo:
The pyogenic granuloma, a lesion considered hyperplastic regenerative inflammatory reaction is a finding commonly found in the oral cavity, affecting large numbers of individuals, being more prevalent in females. But its pathogenesis is not well defined and may be associated with numerous factors that stimulate tissue proliferation. Correct diagnosis and treatment plan are essential for success in approach, restoring function and aesthetics to the periodontal tissues. In agreement with the literature, the most common treatment and greater predictability is surgical removal, which involves resection of the lesion, together with its base inserted into the underlying tissue, periosteum and bone tissue. However, the excision can promote aesthetic defects, particularly in anterior regions where it is most affected. This article reports on the importance of a correct surgical approach for removal of pyogenic granuloma in the region of the interdental papilla between teeth 42 and 43, resulting in a good anatomical result and aesthetic.
Resumo:
The use of different methods and materials should be considered during the planning of implant-supported prostheses. Complications such as fractures of the acrylic resin base, wear and fracture of teeth can occur frequently, creating the need for careful planning for each patient, which can make the selection of the type of treatment more complex. Thus, this article describes the oral rehabilitation of a completely edentulous patient with bimaxillary fixed implant-supported prosthesis, with complaints on aesthetics, loss of vertical dimension and fracture of acrylic resin teeth of the upper arch. After the restoration of vertical dimension, his dentures were replaced with new bimaxillary implant-supported fixed prostheses, ceramic and acrylic resin were used as veneering material for maxilla and mandible, respectively. At the end of the treatment, the patient received bimaxillary flat occlusal splints to protect the teeth and implants of possible parafunctional habits. The approach for the treatment allowed a quick and effective resolution, with aesthetic and functional outcomes very favorable for the patient.
Resumo:
When dental implants are malpositioned in relation to the adjacent teeth and alveolar bone or in an excessive buccal or lingual position, the final prosthesis rehabilitation impairs the peri-implant health of the gingival tissues and the aesthetics of the patient. Thus, the purpose of this case was to report and discuss a multidisciplinary protocol for the treatment of a compromised maxillary tooth in a patient with an abscess in his right central incisor due to an excessive buccal implant position. The patient presented with an implant-supported provisional restoration on his right maxillary central incisor and a traumatic injury in his left central incisor. The treatment protocol consisted in (i) abutment substitution to compensate the incorrect angulation of the implant, (ii) clinical crown lengthening, (iii) atraumatic extraction of the left central incisor, and (iv) immediate implant placement. Finally, (v) a custom abutment was fabricated to obtain a harmonious gingival contour around the prosthetic crown. In conclusion, when implants are incorrectly positioned in relation to the adjacent teeth, associated with soft-tissue defects, the challenge to create a harmonious mucogingival contours may be achieved with an interdisciplinary approach and with the placement of an appropriate custom abutment.
Resumo:
Currently, periodontal aesthetics has been prized for harmony of the smile. The clinical crown lengthening, gingival excess or altered passive eruption, is effectively corrected by periodontal surgery. The purpose of this paper is to show, through a literature review, some types of surgery on clinical crown lengthening and root coverage. Clinical crown lengthening is done to Change the size of the anterior teeth and to optimize the cosmetic result of treatment with new coronal restoration and other cosmetic dental care. In general, the treatment plan and the choice of operative technique begin with careful clinical examination. Recessions tissue can be defined as a displacement of the gingival margin toward the junction mucogingival exposing the root surface. These, when present, impacting on patient comfort by providing the occurrence of cervical dentin hypersensitivity, and the esthetic, the amendment of the gum line. Successful treatment of recessions is based on knowledge of its etiology and assessment of predictability of surgical techniques that aim to root coverage. Through literature review, we can conclude that the types of surgery most often used are: 1) to increase the clinical crown, gingivectomy, flap surgery and gingivoplasty osteotomy, and 2) for root coverage, the use will depend on the amount of gum keratinized and especially the classification of Miller.
Resumo:
The development of new dental materials has expanded dental therapeutic modalities ensuring excellence in aesthetic restorative treatments. Thus, the direct restorative procedures have been used in cases of dental reconstruction allowing an effective treatment with a low cost, while preserving healthy tooth structure. However, the clinician must be used to the techniques and the material in order to ensure longevity and success in the direct restorative procedure. The aim of this paper is to descrive, after completion of periodontal surgical procedures, the direct restorative step performed for dental reconstruction and diastema closure. The integration between Restorative Dentistry and periodontics enableb the restoration of a harmonious smile in a conservative manner, ensuring aesthetics and patient stisfaction.
Resumo:
Society's change of parameters for health and aesthetics has resulted in an increased demand for dental treatments. Nowadays, ceramics systems have shown a substantial development, becoming more reliable and predictable. Dental ceramics, besides being chemically stable, present excellent optical properties when compared to dental structures, thus assuring a special position in the list of aesthetic restorative materials. OBJECTIVE, CASE REPORT AND CONCLUSION: This article describes a successful clinical procedure involving the anterior teeth aesthetics, which were restored with all-ceramic crowns (IPS e.max® Ivoclar Vivadent).
Resumo:
Tooth bleaching is a treatment modality that raises great interest, due to the important role played by aesthetics in current life style. To perform such procedure, nowadays, there are several bleaching substances at several concentrations, as well as, diverse clinical techniques. When suggesting this procedure, the dentist should take into consideration several factors related to the patient to determine which will be the most appropriate technique/material combination for solving the clinical problem. The procedure indication should not only be based on the expectations exhibited by the patient, but also on respecting the biological principles to maintain the integrity of both the endodontic and periodontal tissues.
Resumo:
The reestablishment of a harmonious smile through dental ceramics, when properly conducted and with specific indications, can achieve extremely predictable results. For aesthetic and functional rehabilitation, many ceramic materials can be used such as zirconia, leucite, alumina, feldspar, and lithium disilicate. Among these materials the lithium disilicate stands out due to the following characteristics: its resistance to wear, to chemical attack, high temperatures and oxidation; low electrical conductivity; near zero thermal expansion; good optical properties and biocompatibility with periodontal; excellent esthetics; color stability and reinforcement of tooth structure. The indications for the use of lithium disilicate are not limited to multiple facets of teeth in cases where there was no favorable response to tooth whitening, and also comprehend teeth with multiple restorations, diastema closure, shape alteration, and dental contouring, replacement of missing or fractured teeth, among others. The versatility of lithium disilicate ceramics allows its utilization in several clinical situations. The concomitant use of lithium disilicate for veneers and over metal has satisfactory aesthetic results, as reported in the present studying cases that require both aesthetics and resistance.