Isoelectric Point Determination for Glossoscolex paulistus Extracellular Hemoglobin: Oligomeric Stability in Acidic pH and Relevance to Protein-Surfactant Interactions

The extracellular hemoglobin from Glossoscolex paulistus (HbGp) has a molecular mass of 3.6 M Da, It has a high oligomeric stability at pH 7.0 and low autoxidation rates, as compared to vertebrate hemoglobins. In this work, fluorescence and light scattering experiments were performed with the three oxidation forms of HbGp exposed to acidic pH. Our focus is on the HbGp stability at acidic pH and also on the determination of the isoelectric point (pI) of the protein. Our results show that the protein in the cyanomet form is more stable than in the other two forms, in the whole range. Our zeta-potential data are consistent with light scattering results. Average values apt obtained by different techniques were 5.6 +/- 0.5, 5.4 +/- 0.2 and 5.2 +/- 0.5 for the oxy, met, and cyanomet forms. Dynamic light scattering (DLS) experiments have shown that, at pH 6.0, the aggregation (oligomeric) state of oxy-, met- and cyanomet-HbGp remains the same as that at 7.0. The interaction between the oxy-HbGp and ionic surfactants at pH 5.0 and 6.0 was also monitored in the present study. At pH 5,0, below the protein pI, the effects of sodium dodecyl sulfate (SDS) and cetyltrimethylammonium chloride (CTAC) are inverted when compared to pH 7.0. For CTAC, in acid pH 5.0, no precipitation is observed, while for SDS an intense light scattering appears due to a precipitation process. HbGp interacts strongly with the cationic surfactant at pH 7.0 and with the anionic one at pH 5.0. This effect is due to the predominance, in the protein surface, of residues presenting opposite charges to the surfactant headgroups. This information can be relevant for the development of extracellular hemoglobin-based artificial blood substitutes.

The stability of AM and FM screenings in different water conditions – with the mottle under consideration

This project was performed at Rochester Institute of Technology to get more understanding and knowledge about AM and FM screenings similarities and differences with considerations of the mottle. By designing a test form conformed to the specific measurements and printing it on Heidelberg's Sunday 2000 press, the project group has evaluated the questions that already existed and the ones that occurred during the project. Hence the first press run left some unexpected phenomenon therefore another press run was performed. Measurements were performed and graphs produced in Excel. The project group evaluated the results and from that able to establish facts and draw conclusions. It has been a great experience for the project group and they have learnt a lot.

Paper dimensional stability in sheet-fed offset printing : Papperets dimensionsstabilitet i en arkoffsetpress

In offset printing, dampening solution is used to create a good balance in the process. If too much water is transferred to the paper, the sheet can change its size between the printing units, due to water absorption, and cause a problem with the colour register. This phenomenon is usually referred to as fanout. In this degree project, an investigation was made to see if the paper dimensions changed through its way in the sheet-fed printing process. The instrument Luchs Register Measuring Systems (Lynx) was used, and a method for measuring if the paper changed its dimensions with this instrument, was developed. Paper qualities with three different grammages were used, 90, 130 and 250 gsm. This investigation showed that all paper qualities changed their size with widening in the gripper edge in the range of 10 - 70 µm and in the trailing edge the increase was 10 - 130 µm. The elongations of the papers were in the range of 10- 300 µm. The papers with lowest grammage changed more than the heavier. To see if the print had been affected of the widening and elongation, print quality parameters like relative contrast, dot gain and mottle were correlated with the Lynx data from the sheets. The group of papers that gave correlations were in 130 gsm. The sheets had visual doubling and the combined standard deviation from the Lynx marks K3, K5 and K21 correlated with dot gain. When the variations increased so did the dot gain and this indicates that the doubling was due to the widening. There was also a correlation between the standard deviation from K3 and Mottle. The sheets widened with an average of 30 µm in the gripper edge and since there probably were doubling due to widening it also affected the Mottle values. What the widening depends on is hard to tell. Since widening was so small, it could be due to water absorption, papers being ironed out or maybe the sheets have been flattened out. It probably needs a more detailed investigation to find out what causes the widening. Further investigations about how print quality is affected by the register accuracy of a printing machine should include a print form with measuring areas close to the Lynx marks. The measuring areas should contain fine hairlines, negative text printed with at least two colours and some pictures to evaluate together with standard measuring should give a good knowledge about the subject.

Initiation into engineering : stability and change in gender orders

This article examines processes of doing gender during the initiation of students into engineering programs at university level in Sweden. The article draws on interviews with students, focusing on their understandings of gender. The aim is to explore difficulties with and challenges to traditional gender roles in an academic male dominated arena, by using theories of doing and undoing gender. The empirical material reveals the initiation period or ‘reception’ as a phenomenon both reinforcing and challenging traditional orders. The attempts to challenge norms meet resistance, revealing two paradoxes and one dilemma. In the first paradox the formal purpose of the reception (inclusion) is partly at odds with its informal consequence (exclusion of deviations). The second paradox concerns the contradictory effects of the reception. Even though the reception ensures participation of women, it reinforces existing hierarchies including gender inequality. This results in a dilemma, since in order to protect individual safety, there is a taboo on harassing women which then reproduces stable gender stereotypes. So while harassment taints the respect senior students must earn during the reception, the fact that female students exist in the engineering field challenges the established order and opens the way for change.

Taylor principle and inflation stability in emerging market countriesw

The goal of this paper is to evaluate the validity of the Taylor principle for inflation control in 12 developing countries that use inflation targeting regimes: Brazil, Chile, Colombia, Hungary, Israel, Mexico, Peru, Philippines, Poland, South Africa, Thailand and Turkey. The test is based on a state-space model to determine when each country has followed the principle; then a threshold unit root test is used to verify if the stationarity of the deviation of the expected inflation from its target depends on compliance with the Taylor principle. The results show that such compliance leads to the stationarity of the deviation of the expected inflation from its target in all cases. Furthermore, in most cases, non-compliance with the Taylor principle leads to nonstationary deviation of the expected inflation.

Em busca da autonomia operacional do Banco Central do Brasil como instrumento de estabilização da moeda

Os Bancos Centrais têm, como função principal, zelar pela moeda, de modo a assegurar a estabilidade financeira de seus países. A partir de tal premissa, buscaremos demonstrar que o Banco Central do Brasil necessita de autonomia operacional, a ser regulamentada em lei, a fim de cumprir com sua missão, que é de natureza essencialmente técnica. Em que pese o fato de questão de se implementar, no Brasil, um Banco Central dotado de autonomia não ser consensual, buscaremos demonstrar as vantagens deste modelo, como fator de obtenção de estabilidade monetária. No Brasil, o Banco Central (BACEN), além de arcar com uma enorme gama de atribuições, encontra-se sujeito a pressões governamentais, em face de projetos de curto prazo, não necessariamente compatíveis com a tarefa de estabilização monetária, que pode requerer uma atuação de longo prazo. A autonomia desejada para o BACEN não significa que ele venha a se tomar independente, pelo contrário, uma vez que ele terá que assumir a responsabilidade de atingir metas pré-determinadas pelo Governo, obrigando-se a prestar contas de sua atuação à sociedade, de modo transparente. Para tanto, é preciso que ele seja dotado de autonomia administrativa, orçamentária e operacional, dentro de limites estabelecidos por lei. Ao destacarmos a autonomia do BACEN, trazemos a tona um fator pertinente à questão que é inflação. Trata-se de um processo que corrói a economia, e, quando se toma crônica, 111 como vinha ocorrendo no Brasil até os anos 90, leva à instabilidade e dificulta um planejamento de longo prazo. A necessidade de se controlar a inflação, em muitos países, levou-os a adotar uma política monetária com metas inflacionárias - Inflatíon Targeting. Os países que adotaram o regime de metas inflacionárias conferiram autonomia aos seus Bancos Centrais, pois tanto mais autonomia, tanto mais credibilidade. Desta forma, países como o Chile, a Nova Zelândia, a Alemanha e os demais países que compõem a União Europeia lograram controlar a inflação. Para que o BACEN cumpra com o que lhe compete, exercendo eficientemente o seu papel, é curial, portanto, que seja dotado de autonomia orçamentária, administrativa e operacional, devendo ser regulamentado o art. 192 da Constituição Federal, através de Lei Complementar. Uma vez assegurada legalmente a autonomia de que o Banco Central do Brasil necessita, ter-se-á um meio valioso de controle da inflação, assegurando a estabilidade da moeda e permitindo que o desenvolvimento seja implementado no prazo adequado, permitindo um planejamento estratégico de longo prazo para o país.

Information learning and the stability of fiat money

We analyze the stability of monetary regimes in a decentralized economy where fiat money is endogenously created, information about its value is imperfect, and agents only learn from their personal trading experiences. We show that in poorly informed economies, monetary stability depends heavily on the government's commitment to the long run value of money, whereas in economies where agents gather information more easily, monetary stability can be an endogenous outcome. We generate a dynamics on the acceptability of fiat money that resembles historical accounts of the rise and eventual colIapse of overissued paper money. Moreover, our results provide an explanation of the fact that, despite its obvious advantages, the widespread use of fiat money is a very recent development.

Análise de um queimador infravermelho funcionando com combustível híbrido : GLP/Bio-óleo

Biomass is considered the largest renewable energy source that can be used in an environmentally sustainable. From the pyrolysis of biomass is possible to obtain products with higher energy density and better use properties. The liquid resultant of this process is traditionally called bio-oil. The use of infrared burners in industrial applications has many advantages in terms of technical-operational, for example, uniformity in the heat supply in the form of radiation and convection, with a greater control of emissions due to the passage of exhaust gases through a macroporous ceramic bed. This paper presents a commercial infrared burner adapted with an ejector proposed able to burn a hybrid configuration of liquefied petroleum gas (LPG) and bio-oil diluted. The dilution of bio-oil with absolute ethanol aimed to decrease the viscosity of the fluid, and improving the stability and atomization. It was introduced a temperature controller with thermocouple modulating two stages (low heat / high heat), and solenoid valves for fuels supply. The infrared burner has been tested, being the diluted bio-oil atomized, and evaluated its performance by conducting energy balance. The method of thermodynamic analysis to estimate the load was used an aluminum plate located at the exit of combustion gases and the distribution of temperatures measured by thermocouples. The dilution reduced the viscosity of the bio-oil in 75.4% and increased by 11% the lower heating value (LHV) of the same, providing a stable combustion to the burner through the atomizing with compressed air and burns combined with LPG. Injecting the hybrid fuel there was increase in the heat transfer from the plate to the environment in 21.6% and gain useful benefit of 26.7%, due to the improved in the efficiency of the 1st Law of Thermodynamics of infrared burner

On the temperature stability of extracellular hemoglobin of Glossoscolex paulistus, at different oxidation states: SAXS and DLS studies

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Stability and Local Toxicity Evaluation of a Liposomal Prilocaine Formulation

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Physicochemical Stability of Poly(lactide-co-glycolide) Nanocapsules Containing the Local Anesthetic Bupivacaine

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)