Establishment of a preconditioning regime for air permeability and sorptivity of alkali-activated slag concrete

This study reports an experimental investigation designed to assess the influence of near-surface moisture contents on permeation properties of alkali-activated slag concrete (AASC). Five different drying periods (5, 10, 15, 20 and 25 days) and three AASC and normal concretes with compressive strength grades ranging from C30 to C60 were considered. Assessment of moisture distribution was
achieved using 100 mm diameter cores with drilled cavities. Results indicate that air permeability of AASC is very sensitive to the moisture content and its spatial distribution, especially at relative humidity above 65%. To control the influence of moisture on permeation testing, the recommendation of this paper is that AASC specimens should be dried in controlled conditions at 40 C for 10 days prior to testing. It was also concluded from this study that AASC tends to perform less well, in terms of air permeability and sorptivity, than normal concrete for a given strength grade. This conclusion reinforces the need to further examine AASC properties prior to its widespread practical use.

Absolute cross sections for dissociative electron attachment to HCCCN

New absolute cross sections for dissociative electron attachment to HCCCN (cyanoacetylene or propiolonitrile) in the range of 0-10 eV electron energy are presented here, which have been determined from a new analysis of previously reported data (Graupner et al 2006 New J. Phys. 8 117). The highest cross sections are observed for the formation of CN^- at 5.3 eV and CCCN^- at 5.1 eV; approximately 0.06 Ų and 0.05 Ų respectively. As part of the re-analysis, it was necessary to determine absolute cross sections for electron-impact ionization of HCCCN with the binary-encounter Bethe method. These electron-impact ionization absolute cross sections for HCCCN are also presented here; the maximum value was found to be ∼6.6 Ų at ∼80 eV.

On the statistics of transverse permeability of randomly distributed fibers

An RVE–based stochastic numerical model is used to calculate the permeability of randomly generated porous media at different values of the fiber volume fraction for the case of transverse flow in a unidirectional ply. Analysis of the numerical results shows that the permeability is not normally distributed. With the aim of proposing a new understanding on this particular topic, permeability data are fitted using both a mixture model and a unimodal distribution. Our findings suggest that permeability can be fitted well using a mixture model based on the lognormal and power law distributions. In case of a unimodal distribution, it is found, using the maximum-likelihood estimation method (MLE), that the generalized extreme value (GEV) distribution represents the best fit. Finally, an expression of the permeability as a function of the fiber volume fraction based on the GEV distribution is discussed in light of the previous results.

Oxygen and Chloride Permeability of Alkali-Activated Natural Pozzolan Concrete

One of the important factors in the use of portland cement concrete is its durability, and most of the situations where durability is lacking have been identifi ed and strategies to manage durability have been implemented. Geopolymer concrete, made from an alkali-activated natural pozzolan (AANP), provides an important opportunity for the reduction of carbon dioxide (CO2) emissions associated with the manufacture of concrete but has a limited history of durability studies. Until its different properties are well understood there is no desire to adopt this new technology of unknown provenance by the concrete industry. This paper presents an experimental study of oxygen and chloride permeability of AANP concrete prepared by activating Taftan andesite and Shahindej dacite (Iranian natural pozzolans), with and without calcining, and the correlations between these properties and compressive strength. The results show that compared to ordinary portland cement (OPC) concrete, AANP concrete has lower oxygen permeability at later ages; but it shows moderate to high chloride ion penetrability.

Evaluation of mechanical properties and water vapor permeability in Chitosan biofilms using Sorbitol and Glycerol

Chitosan biofilms were prepared with and without plasticizer (glycerol and sorbitol). The physical and mechanical properties of chitosan biofilms with and without plasticizer were evaluated. Chitosan was obtained from shrimp wastes and characterized. The film forming solution (FFS) was obtained through chitosan dissolution and drying. The solution had its pH adjusted to 6.0 and oven dried (40 8C, 24 h) with forced air circulation. Chitosan biofilms without plasticizer showed a tensile strength about 36% higher than biofilms produced with plasticizer. On the other hand, biofilms with plasticizer presented superior values of elongation. The permeability of the water vapor and color presented significant difference (p<0.05) between all biofilms. Chitosan/plasticizer biofilms showed higher values of water vapor permeability in relation to chitosan biofilms without plasticizer.

A comparison of the physiological demands of rugby union match-play when determined by absolute (ABS) or individual (IND) velocity bands in Global Positioning System (GPS) analysis

Since turning professional in 1995 there have been considerable advances in the research on the demands of rugby union, largely using Global Positioning System (GPS) analysis over the last 10 years. A systematic review on the use of GPS, particularly the setting of absolute (ABS) and individual (IND) velocity bands in field based, intermittent, high-intensity (HI) team sports was undertaken. From 3669 records identified, 38 studies were included for qualitative analysis. Little agreement on the definition of movement intensities within team sports was found, only three papers, all on rugby union, had used IND bands, with only one comparing ABS and IND methods. Thus, the aim of this study was to determine if there is a difference in the demands within positions when comparing ABS and IND methods for GPS analysis and if these differences are significantly different between the forward and back positional groups. A total of 214 data files were recorded from 26 players in 17 matches of the 2015/2016 Scottish BT Premiership. ABS velocity zones 1-7 were set at 1) 0-6, 2) 6.1-11, 3) 11.1-15, 4) 15.1-18, 5) 18.1-21, 6) 21.1-15 and 7) 25.1-40km.h-1 while IND zones 1-7 were 1) <20, 2) 20-40, 3) 40-50, 4) 50-70, 5) 70-80, 6) 80-95 and 7) 95-100% of player’s individually determined maximum velocity (Vmax). A 40m sprint test measured Vmax using OptaPro S4 10 Hz (catapult, Australia) GPS units to derive IND bands. The same GPS units were worn during matches. GPS outputs analysed were % distance, % time, high intensity efforts (HIEs) over 18.1 km.h-1 / 70% max velocity and repeated high intensity efforts (RHIEs) which consists of three HIEs in 21secs. General linear model (GLM) analysis identified a significant difference in the measurement of % total distance covered, between the ABS and IND methods in all zones for forwards (p<0.05) and backs (p<0.05). This difference was also significant between forwards and backs in zones 1, shown as mean difference ± standard deviation (3.7±0.7%), 6 (1.2±0.4%) and 7 (1.0±0.0%) respectively (p<0.05). Percentage time estimations were significantly different between ABS and IND analysis within forwards in zones 1 (1.7±1.7%), 2 (-2.9±1.3%), 3 (1.9±0.8%), 4 (-1.4±0.8%) and 5 (0.2±0.4%), and within backs in zones 1 (-10±1.5%), 2 (-1.2±1.1%), 3 (1.8±0.9%) and 5 (0.6±0.5%) (p<0.05). The difference between groups was significant in zones 1, 2, 4 and 5 (p<0.05). The number of HIEs was significantly different between forwards and backs in zones 6 (6±2) and 7 (3±2). RHIEs were significantly different between ABS and IND for forwards (1±2, p<0.05) although not between groups. Until more research on the differences in ABS and IND methods is carried out, then neither can be deemed a criterion method. In conclusion, there are significant differences between the ABS and IND methods of GPS analysis of the physical demands of rugby union, which must be considered when used to inform training load and recovery to improve performance and reduce injuries.

Analyses of permeability and porosity of sedimentary rocks in terms of unconventional geothermal resource explorations in Poland

Petrophysical investigations are fundamental to natural resource exploration. In order to recognise the geothermal potential of sedimentary rocks in central Poland, 259 samples were collected from prospective deep-lying geothermal reservoirs. Parameters measured include bulk density, skeletal density, effective porosity, permeability, average pore diameter and specific surface. Results indicate that at great depths (mostly > 3,000 m below surface) sedimentary rocks show low values of porosity (mainly less than 5%) and permeability (only sporadically in excess of 1 md). These values call for a petrothermal use of reservoirs, for which an Enhanced Geothermal System (EGS) was developed. Reser- voirs suited for the EGS are Carboniferous and Lower Triassic sandstones in the central part of Poland (Mogilno-Łódź Trough region and a small part of the Kujawy Swell and Fore-Sudetic regions). In addition, Carboniferous limestones in this area are potentially prospective.

Absolute Inequality and Violent Property Crime

Rational choice models argue that income inequality leads to a higher expected utility of crime and thus generates incentives to engage in illegal activities. Yet, the results of empirical studies do not provide strong support for this theory; in fact, Neumayer provides apparently strong evidence that income inequality is not a significant determinant of violent property crime rates when a representative sample is used and country specific fixed effects are controlled for. An important limitation of this and other empirical studies on the subject is that they only consider proportional income differences, even though in rational choice models absolute difference in legal and illegal incomes determine the expected utility of crime. Using the same methodology and data as Neumayer, but using absolute inequality measures rather than proportional ones, this paper finds that absolute income inequality is a statistically significant determinant of robbery and violent theft rates. This result is robust to changes in sample size and to different absolute inequality measures, which not only implies that inequality is an important correlate of violent property crime rates but also suggests that absolute measures are preferable when the impact of inequality on property crime is studied.

Finite difference calculations of permeability in large domains in a wide porosity range.

Determining effective hydraulic, thermal, mechanical and electrical properties of porous materials by means of classical physical experiments is often time-consuming and expensive. Thus, accurate numerical calculations of material properties are of increasing interest in geophysical, manufacturing, bio-mechanical and environmental applications, among other fields. Characteristic material properties (e.g. intrinsic permeability, thermal conductivity and elastic moduli) depend on morphological details on the porescale such as shape and size of pores and pore throats or cracks. To obtain reliable predictions of these properties it is necessary to perform numerical analyses of sufficiently large unit cells. Such representative volume elements require optimized numerical simulation techniques. Current state-of-the-art simulation tools to calculate effective permeabilities of porous materials are based on various methods, e.g. lattice Boltzmann, finite volumes or explicit jump Stokes methods. All approaches still have limitations in the maximum size of the simulation domain. In response to these deficits of the well-established methods we propose an efficient and reliable numerical method which allows to calculate intrinsic permeabilities directly from voxel-based data obtained from 3D imaging techniques like X-ray microtomography. We present a modelling framework based on a parallel finite differences solver, allowing the calculation of large domains with relative low computing requirements (i.e. desktop computers). The presented method is validated in a diverse selection of materials, obtaining accurate results for a large range of porosities, wider than the ranges previously reported. Ongoing work includes the estimation of other effective properties of porous media.

Global trends in relative and absolute income inequality

Este documento muestra una visión general de las tendencias históricas de la desigualdad mundial de ingreso en términos absolutos y relativos -- Dependiendo del concepto usado, las tendencias de desigualdad difieren considerablemente -- La desigualdad entre países aumentó fuertemente durante el periodo 1820-2000 y ha comenzado a disminuir a principios del siglo veintiuno, independiente si es medido en términos relativos o absolutos -- La desigualdad dentro de los países, por el contrario, ha crecido especialmente fuerte en las últimas décadas: su tasa de crecimiento aceleró a partir de 1950 en términos absolutos y a partir de 1975 en términos relativos -- En términos absolutos la desigualdad global también se incrementó sustancialmente en el periodo post-1950, mientras en términos relativos la desigualdad global ha disminuido ligeramente en el mismo periodo

Effect of bleaching agents containing fluoride or calcium on enamel microhardness, roughness and permeability

Aim: To evaluate the effect of different in-office bleaching agents on the permeability, roughness and surface microhardness of human enamel. Methods: For evaluation of roughness and microhardness, 40 hemi-faces of 20 premolars were subjected to initial roughness (Ra parameter) and microhardness (VHN) measurements. Thirty-two premolar’s crowns were used for permeability test. Then, all specimens were randomly divided into four groups: C - without bleaching (control), HP35 - bleaching with 35% hydrogen peroxide (HP), HPF38 - 38% HP+fluoride, HPC35 - 35% HP+calcium. Final roughness (FR) and microhardness (FM) measurements were evaluated. For permeability, the 32 crowns were immersed in 1% sodium hypochlorite (20 min) and silver nitrate solutions (2 h) and subjected to developing solution under fluorescent light (16 h). Three sections from the crowns were analyzed in light microscope (100x) to evaluate the scores of permeability: Score 0 - no tracer agent penetration; Score 1 - less than half the thickness of enamel penetration; Score 2 - tracer agent reaching half the enamel thickness; Score 3 - entire enamel depth penetration, without reaching dentin and Score 4 - tracer agent reaching dentin. For roughness and microhardness evaluation were used one-way ANOVA and Dunnet post-test for independent samples, and t test for paired samples. For permeability, the data were analyzed by Kruskal Wallis and Dunn tests. Results: A significantly higher permeability and surface roughness were observed in groups HP35, HPF38 and HPC35 compared to the C group, as well as decreased microhardness (p<0.05). Conclusions: All bleaching agents increased permeability and surface roughness, and decreased microhardness of human enamel; thus, the addition of fluoride or calcium was not beneficial.

Lattice Boltzmann Modeling and Specialized Laboratory Techniques to Determine the Permeability of Megaporous Karst Rock

The Pleistocene carbonate rock Biscayne Aquifer of south Florida contains laterally-extensive bioturbated ooltic zones characterized by interconnected touching-vug megapores that channelize most flow and make the aquifer extremely permeable. Standard petrophysical laboratory techniques may not be capable of accurately measuring such high permeabilities. Instead, innovative procedures that can measure high permeabilities were applied. These fragile rocks cannot easily be cored or cut to shapes convenient for conducting permeability measurements. For the laboratory measurement, a 3D epoxy-resin printed rock core was produced from computed tomography data obtained from an outcrop sample. Permeability measurements were conducted using a viscous fluid to permit easily observable head gradients (~2 cm over 1 m) simultaneously with low Reynolds number flow. For a second permeability measurement, Lattice Boltzmann Method flow simulations were computed on the 3D core renderings. Agreement between the two estimates indicates an accurate permeability was obtained that can be applied to future studies.

Space density distribution of galaxies in the absolute magnitude - rotation velocity plane: a volume-complete Tully-Fisher relation from CALIFA stellar kinematics

We measured the distribution in absolute magnitude - circular velocity space for a well-defined sample of 199 rotating galaxies of the Calar Alto Legacy Integral Field Area Survey (CALIFA) using their stellar kinematics. Our aim in this analysis is to avoid subjective selection criteria and to take volume and large-scale structure factors into account. Using stellar velocity fields instead of gas emission line kinematics allows including rapidly rotating early-type galaxies. Our initial sample contains 277 galaxies with available stellar velocity fields and growth curve r-band photometry. After rejecting 51 velocity fields that could not be modelled because of the low number of bins, foreground contamination, or significant interaction, we performed Markov chain Monte Carlo modelling of the velocity fields, from which we obtained the rotation curve and kinematic parameters and their realistic uncertainties. We performed an extinction correction and calculated the circular velocity v_circ accounting for the pressure support of a given galaxy. The resulting galaxy distribution on the M-r - v(circ) plane was then modelled as a mixture of two distinct populations, allowing robust and reproducible rejection of outliers, a significant fraction of which are slow rotators. The selection effects are understood well enough that we were able to correct for the incompleteness of the sample. The 199 galaxies were weighted by volume and large-scale structure factors, which enabled us to fit a volume-corrected Tully-Fisher relation (TFR). More importantly, we also provide the volume-corrected distribution of galaxies in the M_r - v_circ plane, which can be compared with cosmological simulations. The joint distribution of the luminosity and circular velocity space densities, representative over the range of -20 > M_r > -22 mag, can place more stringent constraints on the galaxy formation and evolution scenarios than linear TFR fit parameters or the luminosity function alone.