Observable stages and scheduling for alveolar remodeling following antemortem tooth loss

Zahnverlust zu Lebzeiten („antemortem tooth loss“, AMTL) kann als Folge von Zahnerkrankungen, Traumata, Zahnextraktionen oder extremer kontinuierlicher Eruption sowie als Begleiterscheinung fortgeschrittener Stadien von Skorbut oder Lepra auftreten. Nach dem Zahnverlust setzt die Wundheilung als Sekundärheilung ein, während der sich die Alveole mit Blut füllt und sich ein Koagulum bildet. Anschließend erfolgt dessen Umwandlung in Knochengewebe und schließlich verstreicht die Alveole derart, dass sie makroskopisch nicht mehr erkannt werden kann. Der Zeitrahmen der knöchernen Konsolidierung des Kieferkammes ist im Detail wenig erforscht. Aufgrund des gehäuften Auftretens von AMTL in menschlichen Populationen, ist die Erarbeitung eines Zeitfensters, mit dessen Hilfe durch makroskopische Beobachtung des Knochens die Zeitspanne seit dem Zahnverlust („time since tooth loss“, TSL) ermittelt werden kann, insbesondere im archäologischen Kontext äußerst wertvoll. Solch ein Zeitschema mit Angaben über die Variabilität der zeitlichen Abläufe bei den Heilungsvorgängen kann nicht nur in der Osteologie, sondern auch in der Forensik, der allgemeinen Zahnheilkunde und der Implantologie nutzbringend angewandt werden. rnrnNach dem Verlust eines Zahnes wird das Zahnfach in der Regel durch ein Koagulum aufgefüllt. Das sich bildende Gewebe wird rasch in noch unreifen Knochen umgewandelt, welcher den Kieferknochen und auch die angrenzenden Zähne stabilisiert. Nach seiner Ausreifung passt sich das Gewebe schließlich dem umgebenden Knochen an. Das Erscheinungsbild des Zahnfaches während dieses Vorgangs durchläuft verschiedene Stadien, welche in der vorliegenden Studie anhand von klinischen Röntgenaufnahmen rezenter Patienten sowie durch Untersuchungen an archäologischen Skelettserien identifiziert wurden. Die Heilungsvorgänge im Zahnfach können in eine prä-ossale Phase (innerhalb einer Woche nach Zahnverlust), eine Verknöcherungsphase (etwa 14 Wochen nach Zahnverlust) und eine ossifizierte bzw. komplett verheilte Phase (mindestens 29 Wochen nach Zahnverlust) eingeteilt werden. Etliche Faktoren – wie etwa die Resorption des Interdentalseptums, der Zustand des Alveolarknochens oder das Individualgeschlecht – können den normalen Heilungsprozess signifikant beschleunigen oder hemmen und so Unterschiede von bis zu 19 Wochen verursachen. Weitere Variablen wirkten sich nicht signifikant auf den zeitlichen Rahmen des Heilungsprozesse aus. Relevante Abhängigkeiten zwischen verschiedenen Variabeln wurden ungeachtet der Alveolenauffüllung ebenfalls getestet. Gruppen von unabhängigen Variabeln wurden im Hinblick auf Auffüllungsgrad und TSL in multivariablen Modellen untersucht. Mit Hilfe dieser Ergebnisse ist eine grobe Einschätzung der Zeitspanne nach einem Zahnverlust in Wochen möglich, wobei die Einbeziehung weiterer Parameter eine höhere Präzision ermöglicht. rnrnObwohl verschiedene dentale Pathologien in dieser Studie berücksichtigt wurden, sollten zukünftige Untersuchungen genauer auf deren potenzielle Einflussnahme auf den alveolaren Heilungsprozess eingehen. Der kausale Zusammenhang einiger Variablen (wie z. B. Anwesenheit von Nachbarzähnen oder zahnmedizinische Behandlungen), welche die Geschwindigkeit der Heilungsrate beeinflussen, wäre von Bedeutung für zukünftige Untersuchungen des oralen Knochengewebes. Klinische Vergleichsstudien an forensischen Serien mit bekannter TSL oder an einer sich am Anfang des Heilungsprozesses befindlichen klinischen Serie könnten eine Bekräftigung dieser Ergebnisse liefern.

Contributo sperimentale alla ridefinizione della diffusione in parete della camera di prova della galleria del vento Dallara

Joseph Nicolas Cugnot built the first primitive car in 1769 and approximately one hundred year later the first automotive race took place. Thanks to this, for the first time the aerodynamics principles began to be applied to cars. The aerodynamic study of a car is important to improve the performance on the road, or on the track. It purposely enhances the stability in the turns and increases the maximum velocity. However, it is also useful, decrease the fuel consumption, in order to reduce the pollution. Given that cars are a very complex body, the aerodynamic study cannot be conducted following an analytical method, but it is possible, in general, to choose between two different approaches: the numerical or the experimental one. The results of numerical studies depend on the computers’ potential and on the method use to implement the mathematical model. Today, the best way to perform an aerodynamic study is still experimental, which means that in the first phase of the design process the study is performed in a wind tunnel and in later phases directly on track. The automotive wind tunnels are singular mainly due to the test chamber, which typically contains a ground simulation system. The test chamber can have different types of walls: open walls, closed walls, adaptive walls or slotted walls. The best solution is to use the slotted walls because they minimize the interference between the walls and the streamlines, the interaction between the flow and the environment, and also to contain the overall costs. Furthermore, is necessary minimize the boundary layer at the walls, without accelerating the flow, in order to provide the maximum section of homogeneous flow. This thesis aims at redefining the divergent angle of the Dallara Automobili S.P.A. wind tunnel’s walls, in order to improve the overall homogeneity. To perform this study it was necessary to acquire the pressure data of the boundary layer, than it was created the profile of the boundary layer velocity and, to minimize the experimental errors, it was calculated the displacement thickness. The results obtained shows, even if the instrument used to the experiment was not the best one, that the boundary layer thickness could be minor in case of a low diffusion angle. So it is convenient to perform another experiment with a most sensitive instrument to verified what is the better wall configuration.

Stabilität und Transport in der planetaren Grenzschicht - Untersuchungen mit Radiosonden- und Spurengasmessungen während PARADE

Die vorliegende Arbeit untersucht die Struktur und Zusammensetzung der untersten Atmosphäre im Rahmen der PARADE-Messkampagne (PArticles and RAdicals: Diel observations of the impact of urban and biogenic Emissions) am Kleinen Feldberg in Deutschland im Spätsommer 2011. Dazu werden Messungen von meteorologischen Grundgrößen (Temperatur, Feuchte, Druck, Windgeschwindigkeit und -richtung) zusammen mit Radiosonden und flugzeuggetragenen Messungen von Spurengasen (Kohlenstoffmonoxid, -dioxid, Ozon und Partikelanzahlkonzentrationen) ausgewertet. Ziel ist es, mit diesen Daten, die thermodynamischen und dynamischen Eigenschaften und deren Einfluss auf die chemische Luftmassenzusammensetzung in der planetaren Grenzschicht zu bestimmen. Dazu werden die Radiosonden und Flugzeugmessungen mit Lagrangeschen Methoden kombiniert und es wird zwischen rein kinematischen Modellen (LAGRANTO und FLEXTRA) sowie sogenannten Partikeldispersionsmodellen (FLEXPART) unterschieden. Zum ersten Mal wurde im Rahmen dieser Arbeit dabei auch eine Version von FLEXPART-COSMO verwendet, die von den meteorologischen Analysefeldern des Deutschen Wetterdienstes angetrieben werden. Aus verschiedenen bekannten Methoden der Grenzschichthöhenbestimmung mit Radiosondenmessungen wird die Bulk-Richardson-Zahl-Methode als Referenzmethode verwendet, da sie eine etablierte Methode sowohl für Messungen und als auch Modellanalysen darstellt. Mit einer Toleranz von 125 m, kann zu 95 % mit mindestens drei anderen Methoden eine Übereinstimmung zu der ermittelten Grenzschichthöhe festgestellt werden, was die Qualität der Grenzschichthöhe bestätigt. Die Grenzschichthöhe variiert während der Messkampagne zwischen 0 und 2000 m über Grund, wobei eine hohe Grenzschicht nach dem Durchzug von Kaltfronten beobachtet wird, hingegen eine niedrige Grenzschicht unter Hochdruckeinfluss und damit verbundener Subsidenz bei windarmen Bedingungen im Warmsektor. Ein Vergleich zwischen den Grenzschichthöhen aus Radiosonden und aus Modellen (COSMO-DE, COSMO-EU, COSMO-7) zeigt nur geringe Unterschiede um -6 bis +12% während der Kampagne am Kleinen Feldberg. Es kann allerdings gezeigt werden, dass in größeren Simulationsgebieten systematische Unterschiede zwischen den Modellen (COSMO-7 und COSMO-EU) auftreten. Im Rahmen dieser Arbeit wird deutlich, dass die Bodenfeuchte, die in diesen beiden Modellen unterschiedlich initialisiert wird, zu verschiedenen Grenzschichthöhen führt. Die Folge sind systematische Unterschiede in der Luftmassenherkunft und insbesondere der Emissionssensitivität. Des Weiteren kann lokale Mischung zwischen der Grenzschicht und der freien Troposphäre bestimmt werden. Dies zeigt sich in der zeitlichen Änderung der Korrelationen zwischen CO2 und O3 aus den Flugzeugmessungen, und wird im Vergleich mit Rückwärtstrajektorien und Radiosondenprofilen bestärkt. Das Einmischen der Luftmassen in die Grenzschicht beeinflusst dabei die chemische Zusammensetzung in der Vertikalen und wahrscheinlich auch am Boden. Diese experimentelle Studie bestätigt die Relevanz der Einmischungsprozesse aus der freien Troposphäre und die Verwendbarkeit der Korrelationsmethode, um Austausch- und Einmischungsprozesse an dieser Grenzfläche zu bestimmen.

Growth hormone (GH)-releasing hormone increases the expression of the dominant-negative GH isoform in cases of isolated GH deficiency due to GH splice-site mutations

An autosomal dominant form of isolated GH deficiency (IGHD II) can result from heterozygous splice site mutations that weaken recognition of exon 3 leading to aberrant splicing of GH-1 transcripts and production of a dominant-negative 17.5-kDa GH isoform. Previous studies suggested that the extent of missplicing varies with different mutations and the level of GH expression and/or secretion. To study this, wt-hGH and/or different hGH-splice site mutants (GH-IVS+2, GH-IVS+6, GH-ISE+28) were transfected in rat pituitary cells expressing human GHRH receptor (GC-GHRHR). Upon GHRH stimulation, GC-GHRHR cells coexpressing wt-hGH and each of the mutants displayed reduced hGH secretion and intracellular GH content when compared with cells expressing only wt-hGH, confirming the dominant-negative effect of 17.5-kDa isoform on the secretion of 22-kDa GH. Furthermore, increased amount of 17.5-kDa isoform produced after GHRH stimulation in cells expressing GH-splice site mutants reduced production of endogenous rat GH, which was not observed after GHRH-induced increase in wt-hGH. In conclusion, our results support the hypothesis that after GHRH stimulation, the severity of IGHD II depends on the position of splice site mutation leading to the production of increasing amounts of 17.5-kDa protein, which reduces the storage and secretion of wt-GH in the most severely affected cases. Due to the absence of GH and IGF-I-negative feedback in IGHD II, a chronic up-regulation of GHRH would lead to an increased stimulatory drive to somatotrophs to produce more 17.5-kDa GH from the severest mutant alleles, thereby accelerating autodestruction of somatotrophs in a vicious cycle.

Identification of a fibronectin interaction site in the extracellular matrix protein ameloblastin

Mammalian teeth are composed of hydroxyapatite crystals that are embedded in a rich extracellular matrix. This matrix is produced by only two cell types, the mesenchymal odontoblasts and the ectodermal ameloblasts. Ameloblasts secrete the enamel proteins amelogenin, ameloblastin, enamelin and amelotin. Odontoblasts secrete collagen type I and several calcium-binding phosphoproteins including dentin sialophosphoprotein, dentin matrix protein, bone sialoprotein and osteopontin. The latter four proteins have recently been grouped in the family of the SIBLINGs (small integrin-binding ligand, N-linked glycoproteins) because they display similar gene structures and because they contain an RGD tripeptide sequence that binds to integrin receptors and thus mediates cell adhesion. We have prepared all the other tooth-specific proteins in recombinant form and examined whether they might also promote cell adhesion similar to the SIBLINGs. We found that only ameloblastin consistently mediated adhesion of osteoblastic and fibroblastic cells to plastic or titanium surfaces. The activity was dependent on the intact three-dimensional structure of ameloblastin and required de novo protein synthesis of the adhering cells. By deletion analysis and in vitro mutagenesis, the active site could be narrowed down to a sequence of 13 amino acid residues (VPIMDFADPQFPT) derived from exon 7 of the rat ameloblastin gene or exons 7-9 of the human gene. Kinetic studies and RNA interference experiments further demonstrated that this sequence does not directly bind to a cell surface receptor but that it interacts with cellular fibronectin, which in turn binds to integrin receptors. The identification of a fibronectin-binding domain in ameloblastin might permit interesting applications for dental implantology. Implants could be coated with peptides containing the active sequence, which in turn would recruit fibronectin from the patient's blood. The recruited fibronectin should then promote cell adhesion on the implant surface, thereby accelerating osseointegration of the implant.

Sleep and biomarkers of atherosclerosis in elderly Alzheimer caregivers and controls

Perturbed sleep might contribute to cardiovascular disease by accelerating atherosclerosis. Sleep is poor in Alzheimer caregivers who are also a group at increased cardiovascular risk.

Doubly charged ion mass spectra of alkyl-substituted furans and pyrroles

Doubly charged ion mass spectra of alkyl-substituted furans and pyrroles were obtained using a double-focusing magnetic mass spectrometer operated at 3.2 kV accelerating voltage. Molecular ions were the dominant species found in doubly charged spectra of lower molecular weight heterocydic compounds, whereas the spectra of the higher weight homologues were typified by abundant fragment ions from extensive decomposition. Measured doubly charged ionization and appearance energies ranged from 22.8 to 47.9 eV. Ionization energies were correlated with values calculated using self-consistent field–molecular orbital techniques. A multichannel diabatic curve-crossing model was developed to investigate the fundamental organic ion reactions responsible for development of doubly charged ion mass spectra. Probabilities for Landau–Zener type transitions between reactant and product curves were determined and used in the collision model to predict charge-transfer cross-sections, which compared favorably with experimental cross-sections obtained using time-of-flight techniques.

Invariant barriers to reactive front propagation in fluid flows

We present theory and experiments on the dynamics of reaction fronts in two-dimensional, vortex-dominated flows, for both time-independent and periodically driven cases. We find that the front propagation process is controlled by one-sided barriers that are either fixed in the laboratory frame (time-independent flows) or oscillate periodically (periodically driven flows). We call these barriers burning invariant manifolds (BIMs), since their role in front propagation is analogous to that of invariant manifolds in the transport and mixing of passive impurities under advection. Theoretically, the BIMs emerge from a dynamical systems approach when the advection-reaction-diffusion dynamics is recast as an ODE for front element dynamics. Experimentally, we measure the location of BIMs for several laboratory flows and confirm their role as barriers to front propagation.

Barriers to front propagation in ordered and disordered vortex flows

We present experiments on reactive front propagation in a two-dimensional (2D) vortex chain flow (both time-independent and time-periodic) and a 2D spatially disordered (time-independent) vortex-dominated flow. The flows are generated using magnetohydrodynamic forcing techniques, and the fronts are produced using the excitable, ferroin-catalyzed Belousov-Zhabotinsky chemical reaction. In both of these flows, front propagation is dominated by the presence of burning invariant manifolds (BIMs) that act as barriers, similar to invariant manifolds that dominate the transport of passive impurities. Convergence of the fronts onto these BIMs is shown experimentally for all of the flows studied. The BIMs are also shown to collapse onto the invariant manifolds for passive transport in the limit of large flow velocities. For the disordered flow, the measured BIMs are compared to those predicted using a measured velocity field and a three-dimensional set of ordinary differential equations that describe the dynamics of front propagation in advection-reaction-diffusion systems.

Oxotremorine Delays and Scopolamine Accelerates Sexual Exhaustion When Applied to the Preoptic Area in Male Hamsters

Acetylcholine (ACh) has not been tested for a role in the development of sexual exhaustion in males. However, male hamsters receiving infusions into the medial preoptic area (MPOA) of the muscarinic agonist oxotremorine (OXO) or antagonist scopolamine (SCO) show changes in the postejaculatory interval, one of the measures that changes most consistently as exhaustion approaches. In addition, central SCO treatments cause changes in the patterning of intromissions that resemble those signaling exhaustion. To extend these observations and more thoroughly test the dependence of sexual exhaustion on ACh, male hamsters received MPOA treatments of OXO, SCO or the combination of the two before mating to exhaustion. Relative to placebo, OXO infusions caused small but consistent increases in ejaculation frequency and long intromission latency, delaying the appearance of exhaustion. Scopolamine treatments did the reverse, dramatically accelerating the development of exhaustion. Consistent with and possibly responsible for these changes were effects on the quality of performance prior to exhaustion. These included differences in overall copulatory efficiency (e.g., ejaculations/intromission), which was increased by OXO and decreased by SCO. They also extended to several standard measures of copulatory behavior, including intromission frequency, ejaculation latency and the postejaculatory interval: Most of these were increased by SCO and decreased by OXO. Finally, whereas most or all effects of OXO were counteracted by SCO, most or all of the responses to SCO resisted change by added OXO. This asymmetry in the responses to combined treatment raises the possibility that the effects of these drugs on sexual exhaustion and other elements of male behavior are mediated by distinct muscarinic receptors. Copyright 2013 Elsevier Inc. All rights reserved.

The role of warning behaviors in threat assessment: an exploration and suggested typology

The concept of warning behaviors offers an additional perspective in threat assessment. Warning behaviors are acts which constitute evidence of increasing or accelerating risk. They are acute, dynamic, and particularly toxic changes in patterns of behavior which may aid in structuring a professional's judgment that an individual of concern now poses a threat - whether the actual target has been identified or not. They require an operational response. A typology of eight warning behaviors for assessing the threat of intended violence is proposed: pathway, fixation, identification, novel aggression, energy burst, leakage, directly communicated threat, and last resort warning behaviors. Previous research on risk factors associated with such warning behaviors is reviewed, and examples of each warning behavior from various intended violence cases are presented, including public figure assassination, adolescent and adult mass murder, corporate celebrity stalking, and both domestic and foreign acts of terrorism. Practical applications and future research into warning behaviors are suggested. Copyright © 2011 John Wiley & Sons, Ltd.

Influence of nest site on the behaviour of laying hens

Low rates of nest acceptance by laying hens are a major problem in commercial poultry farming operations with aviary systems, leading to costly manual collection and cleaning of mislaid eggs. To gain knowledge about factors affecting nest use, laying hens' preferences for different nest locations were tested. Nests are normally installed at one of two sites: against a wall of the hen house or integrated into one tier of the aviary rack The preferences of laying hens for different nest sites have never been examined under commercial conditions. The aim of this study is to investigate whether behavioural differences can be detected between the different nest sites. The study consists of two consecutive trials involving 5027 Lohmann Selected Leghorn hens (LSL) and 601 layer hybrids selected for extensive housing conditions (EXT). The hens were randomly assigned to eight compartments per trial in groups of 355-360 LSL or 300 EXT in a laying hen house. Four compartments were equipped with a Volito Voletage (R) aviary system (VV), and four were equipped with a Rihs Bolegell (R) aviary system (RB), both of which contained either integrated or wall-placed nests when the experiments started. A strongly balanced crossover design with four periods was used. At 36, 44 and 52 weeks of age, the nest site in four out of the eight compartments was switched. Before each change, the fronts of half of the nests were videotaped during the light period, and the behaviour throughout the main laying period was analysed. Furthermore, the numbers of nest eggs and mislaid eggs in each compartment were recorded every day. No differences in the number of mislaid eggs between the two nest sites could be detected, except at the age of 20/21 weeks when hens in VV aviaries mislaid more eggs when nests were integrated (P = 0.0012). More hens stood simultaneously in front of the integrated nests than in front of wall-placed nests (P = 0.015). Activity of the laying hens increased (P = 0.0073), and stationary behavioural patterns declined (P = 0.0093), when the nests were placed by the wall. Hens inspected integrated nests for a longer duration than wall-placed nests, but wall-placed nests were visited more frequently. In addition to the nest site, the width of the platform in front of the nest influenced laying hen behaviour. Compared with narrower platforms, balance movements decreased on wider ones. Additionally, the platform design had to be taken into account as well, given that hens could not stand or walk as securely on wooden slats as on a grid floor. (C) 2011 Elsevier B.V. All rights reserved.

COLONIALES ET RESISTANCE ANTINAZIE AU CAMEROUN, 1939 - 1945

Dans l’histoire des civilisations, le contexte de guerre a très généralement placé les femmes en marge des actions de guerre. Au propre comme au figuré, elles y apparaissent le plus souvent protégées, écartées des fronts, qui semblent conséquemment être la seule affaire des hommes du fait de l’usage généralisé de la violence. C’est logiquement l’idée répandue qu’on s’en fait des occidentales établies en colonies africaines, surtout qu’entre 1914 et 1918, notamment au Cameroun, territoire colonial allemand disputé avec la France et l’Angleterre, les coloniales allemandes ont été prioritairement surprotégées1. Pourtant, il n’en a pas toujours été ainsi de toutes les crises majeures vécues sur ce territoire colonial. La période française apparaît plus intéressante en ceci que l’exclusion des blanches du front y a été peu évidente. La spécificité du Cameroun entre intérêts français et allemands, et la guerre fratricide qui mettent en opposition idéologique les Français entre eux, sont autant de raisons qui convoquent une attitude particulière des administrateurs coloniaux du Cameroun pour la défense du territoire. Entre 1939 et 1945 en effet, ils mettent à contribution la gente féminine dans la plupart de leurs stratégies adoptées pour la protection des acquis français outre-mer. De fait, au milieu des démonstrations de force essentiellement viriles vécues alors, il faut parfois compter sur une catégorie de femmes qui t battent parallèlement en brèche les stéréotypes liés au sexe, pour pénétrer un cercle fermé et jouer un rôle plus ou moins déterminant dans la défense de ce territoire français outre-mer. Face aux velléités de sujétion nazie qu’elles récusent, quelques coloniales surtout françaises se frottent exceptionnellement aux protagonistes du moment pour clairement s’affirmer comme de valeureuses résistantes de l’intégrité territoriale française. Qui étaient ces résistantes à l’ordre nazi au Cameroun ? Pourquoi et comment s’intègrent-elles dans le mouvement de résistance local ? A quel titre et de quelle manière ? Quels rôles y jouent-elles entre 1939 et 1945 ? Des questions pertinentes qu’il serait loisible d’analyser en profondeur afin de mettre en lumière la véritable participation féminine pour la vie et à la survie de la France en colonie, notamment au Cameroun. (Cameroun 1939 - 1945, Femmes, activisme français, résistance)

Writing center handbooks and travel guidebooks : redesigning instructional texts for multicultural, multilingual, and multinational contexts

In an increasingly interconnected world characterized by the accelerating interplay of cultural, linguistic, and national difference, the ability to negotiate that difference in an equitable and ethical manner is a crucial skill for both individuals and larger social groups. This dissertation, Writing Center Handbooks and Travel Guidebooks: Redesigning Instructional Texts for Multicultural, Multilingual, and Multinational Contexts, considers how instructional texts that ostensibly support the negotiation of difference (i.e., accepting and learning from difference) actually promote the management of difference (i.e., rejecting, assimilating, and erasing difference). As a corrective to this focus on managing difference, chapter two constructs a theoretical framework that facilitates the redesign of handbooks, guidebooks, and similar instructional texts. This framework centers on reflexive design practices and is informed by literacy theory (Gee; New London Group; Street), social learning theory (Wenger), globalization theory (Nederveen Pieterse), and composition theory (Canagarajah; Horner and Trimbur; Lu; Matsuda; Pratt). By implementing reflexive design practices in the redesign of instructional texts, this dissertation argues that instructional texts can promote the negotiation of difference and a multicultural/multilingual sensibility that accounts for twenty-first century linguistic and cultural realities. Informed by the theoretical framework of chapter two, chapters three and four conduct a rhetorical analysis of two forms of instructional text that are representative of the larger genre: writing center coach handbooks and travel guidebooks to Hong Kong. This rhetorical analysis reveals how both forms of text employ rhetorical strategies that uphold dominant monolingual and monocultural assumptions. Alternative rhetorical strategies are then proposed that can be used to redesign these two forms of instructional texts in a manner that aligns with multicultural and multilingual assumptions. These chapters draw on the work of scholars in Writing Center Studies (Boquet and Lerner; Carino; DiPardo; Grimm; North; Severino) and Technical Communication (Barton and Barton; Dilger; Johnson; Kimball; Slack), respectively. Chapter five explores how the redesign of coach handbooks and travel guidebooks proposed in this dissertation can be conceptualized as a political act. Ultimately, this dissertation argues that instructional texts are powerful heuristic tools that can enact social change if they are redesigned to foster the negotiation of difference and to promote multicultural/multilingual world views.

ISO 14001 in India: More than a certificate on the wall?

The growth of ISO 14001 certificates worldwide has led to much research on the role of voluntary standards in improving the environmental impacts of industry. Most of this research, however, has focused on industrialized countries, with very little research examining the effects of ISO 14001 and other voluntary initiatives in the developing world. This is especially unfortunate because it is in these very countries that proponents of ISO 14001 claim the largest benefits of the standard will occur, by helping polluting industries improve performance and by assisting environmental regulators in enforcing laws more effectively. Indian industries have begun adopting ISO 14001 at an accelerating pace, but there is little available information on what this means for the environmental performance of Indian firms. The research described here closes this gap by exploring the reasons for the increasing popularity of ISO 14001 in India, the ways in which firms use the standard and the benefits they obtain from it. Findings suggest that while the processoriented approach of ISO 14001 does offer important benefits, changing market demands towards cheaper certification and away from rigorous EMS implementation have devalued the standard for those interested in using it as an indicator of a firm’s environmental performance.