Sistema de iluminação inteligente através de redes de sensores wireless

The objective of this project is to collaborate with the society, working on a subject that is directly linked to issues of sustainability and environmental preservation. For this, a survey is being developed in order to make possible the creation of an intelligent mechanism, with the use of wireless solutions for the control of energy consumption in order to meet the needs of quality of life and reduce the average consumption of electrical energy. An intelligent lighting system can be explained simply, as an interconnected network of lamps in order to meet needs such as light intensity, the location of it, the moment will turn on or turn off the lights, among other possibilities. This network of lamps is controlled by algorithms implemented using microcontrollers, which may or may not have changed its characteristics. This can be automatic (pre-programmed by the administrator) or manual (controlled via a remote control, phones, etc.), and will depend upon the manager himself and also the characteristics imposed on the project. However, it is important to note that after the search is complete, decisions will be consistent with the Brazilian reality, ie, this system can only be feasible if it has all the characteristics described above, but with an affordable price so that people can acquire it

Sensores de amônia à base de polianilina preparados com impressora jato de tinta

Neste trabalho, apresenta-se o desenvolvimento de um sensor de gás amônia sobre substrato de papel, impresso por jato de tinta térmico. Para a realização do trabalho formulou-se uma “tinta”4 de polianilina (PANI), adequada para uso na impressora térmica. Neste tipo de impressão, é necessário que a tinta de PANI seja preparada de forma que a maior parte do seu volume seja de água. A PANI, em seu estado desdopado, foi dissolvida em n-metil-2-pirrrilidona (NMP), e com a adição de água em determinadas condições de preparo e proporção, foi possível formar uma tinta de PANI/NMP/H2O estável e adequada para o uso na impressora térmica, podendo-se assim depositar filmes de PANI sobre substratos flexíveis, como por exemplo, diversos tipos de papéis. Neste trabalho, tintas de PANI foram depositadas sobre papel comum (sulfite) e papel fotográfico (glossy). A caracterização morfológica, por microscopia ótica, indicou que a qualidade dos filmes foi satisfatória em termos de uniformidade e homogeneidade. A resistividade de superfície dos filmes de PANI, sobre substratos de papel sulfite e fotográfico, é da ordem de 1x109 / , quando desdopado, e 1x104 / , quando dopado com vapor de ácido clorídrico (HCl). As caracterizações elétricas AC sugerem que os filmes de PANI desdopados, sobre ambos os substratos, se comportam similarmente a um circuito equivalente RC, formado por um resistor e um capacitor em paralelo. Entretanto, após a dopagem tal representação deixa de ser válida. Medidas elétricas...(Resumo completo, clicar acesso eletrônico abaixo)

Estudo e modelagem 3D de uma turbina Francis

Most of the hydraulic turbines that are running in the world are the Francis type, because they are able to fit a wide range of head and flow. We also can declare that most of the installed hydraulic energy up to this date is generated by this type of turbine. On the other hand, if we pay attention to mechanical details of a Francis turbine we will see that among the three most used types it is the one that presents the more complex design. And, the simplest one is the Pelton type, whereas the Kaplan is the one less utilized. This work aims to develop the hydrodynamic calculation of a Francis turbine as well as to obtain its assembly drawing and 3D modeling drawing. In this way all details must be shown therefore needing a complete knowledge about this issue. Both 2D and 3D drawings help much if one wants the machine to be running in its power house. It is well noted that most of the entities that design and manufacture the Francis turbines are not brazilian. In this way the more we study how to design this kind of machine the more is our contribution to our country in order to conquer technology and manufacture Francis turbines

Modelagem em 3D de uma patela humana e análise de esforços utilizando o método dos elementos finitos

Throughout the history of medicine surgeons realized the importance of the patella to the functioning of the knee. The main function of the patella is to increase the mechanical efficiency of the quadriceps tendon and knee extensor mechanism. It was found that 50% to 80% of the fractures without deviation of the patella have the transversal pattern, possibly due to excessive tensile forces applied to the extensor mechanism. The purpose of this study is to analyze the loads to which a patella is submitted during a normal extension movement of knee. This analysis will be done by modeling a 3D patella and subsequent load simulation as, described in medical literature, using the finite element method

Aplicação da MTF e FWHM para análise de resolução espacial de sensores de Biossusceptometria AC

Neste trabalho foi analisada a resolução espacial de sensores de Biossusceptometria AC (BAC) correlacionando dois métodos consagrados em análise de resolução, a Função de Transferência Modulada (do inglês MTF) e a Largura à Meia Altura (FWHM) da Função de Espalhamento Pontual (PSF). A partir da aquisição da PSF do sistema, foi possível quantificar a resolução dos sensores pelos dois métodos. Foram analisados sensores de diferentes diâmetros para a obtenção da correlação entre os dois métodos. Foi variada também a corrente, indiretamente, pela variação de voltagem de excitação. Com estas metodologias foi possível avaliar a resolução de maneira pontual dos sensores, sendo possível otimizar a utilização dos sensores de acordo com a medida a ser realizada

Modelos de tratamento para adenocarcinomas de próstata tratados por radioterapia conformacional 3D

Radiotherapy is a branch of medical physics related to the treatment of malignant neoplasm, being an important instrument in the fight against cancer, when combined with the effort of a multidisciplinary team, composed of, physicians, physicists, nurses and technicians. Every year more than 3.5 million new cases of cancer are recorded in the world, being the prostate cancer responsible for approximately 25% of this amount (INCA and IARC, 2008). In this type of cancer, radiotherapy is a method indicated for treatement. The technological advance in this area over years has allowed a greater accuracy in the tumor location, more conformation of the radiation beam around the tumor, reducing the dose in healthy tissues and a consequent dose increase on treatment (Bedford et al., 1999). A radiotherapy planning, in which the physicist develops an important role, is composed of several steps, including choosing the best configuration of treatment beams. This choice has a close relationship with success of therapy and is critical to achieve the best distribution of dose inside the tumor and expose the least as possible the healthy tissue to radiation. In this work, two options for setting up camps in the first phase in a treatment of prostate cancer were simulated in computer planning: 4 fields orthogonal or “Box” with gantry angles in 00, 1800, 2700 e 90° and 4 fields angled or “X” (1350, 450, 3150 e 2250). The percentage of the rectal volume exposed to 40, 50, 60, 72 and 76 Gy should be limited to 60, 50, 25, 15 and 5% respectively (Greco et al., 2003). The femoral toxicity have limited dose by 70% of the total dose prescribed in a prostate treatment (Bedford et al., 1999). The planning of 27 patients with prostate adenocarcinoma submitted to 3D conformal radiotherapy were accompanied. As a result, it was assessed that the best TCP (tumor control probability)... (Complete abstract click electronic access below)

Caracterização de sensores nanoplasmônicos produzidos com os polímeros pdma e paa: Micaela Gisoldi Ribeiro. –

A combinação de polímeros com nanopartículas de metais nobres resultam na formação de filmes finos, que podem ser utilizado na fabricação de nanosensores. Esses filmes finos possuem propriedades exclusivas, que causam ressonância plasmônica de superfície pela mudança conformacional dos mesmos. Essa variação conformacional é causada pela interação com analito ou por estímulo externo, podendo ser analisada por espectroscopia de absorção na região do UV-vis. Este simples e econômico meio de transdução do sinal apresenta-se como uma ferramenta bastante promissora, e se combinado com a alta seletividade encontrada em reações biológicas, torna-se ainda mais promissora no desenvolvimento de sensores. Os esforços desse projeto foram concentrados para o desenvolvimento dos sensores que respondam a estímulos externo e baseado na utilização de polímeros escovas. Este trabalho de conclusão de curso foi baseada na produção de sensores nanoplasmônicos, que na presença de fatores externos causam modificação estrutural dos filmes finos poliméricos depositados sobre um substrato e dão um resposta altamente seletiva. As mudanças conduzirão à geração de sinais ópticos ou eletroquímico, que serão medidos por transmissão de ressonância plasmônica de superfície ou via eletroquímica. Foram realizados experimentos de voltametria cíclica e impedância eletroquímica em pH=3 para avaliar a capacidade de eletródica deste material. Também foram efetuados experimentos por espectrofotometria de absorção na região de ultravioleta-visível em pHs variando de 3 a 7 para se analisar o efeito plasmônico do material. Pode-se notar que em pH mais ácidos o polímero se mostrou mais condutor e de acordo com a literatura este efeito é causado pela expansão polimérica que deixa o mesmo em seu estado ativo ON (expandido). Já em pH mais básicos os polímeros demonstraram um comportamento inverso por os mesmo se contraem, ...

Modelo petrofísico 3D do Arenito Namorado no Campo de Namorado - Bacia de Campos, RJ

The Namorado Oil Field represents the beginning of the oil exploration in Brazil, in the 70s, and it is still a subject of researches because the importance of this turbidite sandstone in the brazilian oil production. The Namorado’s production level was denominated “Namorado sandstone”, it is composed by turbidite sandstone deposited during the Albian-Cenomanian. In order to define the structural geometry of the main reservoir, geological and geophysical tools like RECON and Geographix (Prizm – Seisvision) softwares were used, and its application was focused on geological facies analysis, for that propose well logs, seismic interpretation and petrophysical calculations were applied. Along this work 15 vertical wells were used and the facies reservoirs were mapped of along the oil field; it is important to mentioned that the all the facies were calibrated by the correlation rock vs log profile, and 12 reservoir-levels (NA-1, NA-2, NA-3, NA-4, NA-5, NA-6, NA-7, NA-8, NA-9, NA-10, NA-11 e NA-12) were recognized and interpreted. Stratigraphic sections (NE-SW and NW-SE) were also built based on stratigraphic well correlation of each interpreted level, and seismic interpretation (pseudo-3D seismic data) on the southeastern portion of the oil field. As results it was interpreted on two- and three-dimensional maps that the deposition reservoir’s levels are hight controlled by normal faults systems. This research also shows attribute maps interpretation and its relationship with the selection of the reservoir attribute represented on it. Finally the data integration of stratigraphic, geophysical and petrophysical calculations lets us the possibility of obtain a detail geological/petrophysical 3D model of the main reservoir levels of “Namorado sandstone” inside the oil/gás field

Expansão ex vivo de células uroteliais em scaffolds 3D

Malformations and possible damages to the urogenital system can be originated in the embryonic period. Moreover, fire guns, knives and accidents, where there is the disruption of the urethra, also cause these lesions. The objective was to analyze the contribution of tissue engineering in the construction of neo-urethra, developed by bioengineering. We performed an urothelial ex vivo expansion of cells in 3D scaffolds (platelet gel matrix and acellular porcine aorta) to assess the contribution of this technique in the construction of a neo-urethra. Mechanical dissociation was made of the inner wall of 10 North Folk rabbit’s bladder, weighing 2.5 to 3.0 kg. After dissociation the cell content was centrifuged and obtained a pellet of urothelial cells. The pellet was ressuspended in culture medium DMEM F12 and cells were maintained in culture for 15 days. Immunohistochemical analysis characterized the urothelial culture. The cells were then implanted in the scaffold - platelet gel. In a second experiment using aortic porcine acellular matrix were implanted urothelial cells alone and urothelial cells on platelet gel, on the inner wall of the scaffold - aorta, with space for setting bordered by a urethral probe. The complex probe - cells - aorta and probe - cells in platelet gel - aorta, were sealed with suture material and culture were maintained in a humidified 37ºC incubator with 5% CO2 in air for 12 days to subsequent histological analysis of urothelium cell adhesion to the scaffolds. By observation under an optical microscope, we could see the growth of cells in the scaffold platelet gel, from a monolayer in to a three-dimensional structure. In the acellular porcine aortic matrix containing the platelet gel, we could observe a few quantity of urothelial cells adhered. However with the acellular porcine aortic matrix in which was implanted only the urothelial cells, we have obtained adhesion to the wall

Estudo para correção dos sensores da rede de monitoramento do campo elétrico em função do campo elétrico de tempo bom

A monitoring network of atmospheric electric field covering the Vale do Paraiba region was implemented. The sensors were located on different sites with different altitude and geographic topology. The present work reports the study carried on those sensors in order to verify the necessity of using some correction factor to the measured local electric field intensity due to effects of local environment. The measurements were done in continuous 24 hours per day with the data recorded on registers in each device accumulating information during a period of four months. The relation between the electric field values by each sensor was compared to the reference located on Sao Jose dos Campos city using the same period. In a graphical analysis using the local field intensity and the reference, the data were fitted to a straight line obtained by minimum square method. Variation up to 95% was observed between the field values in some sensors. Another method was proposed, comparing the mean values of the electric field in a function of time. The variation in some sensors reached up to 133%. We conclude that the variations are due to local atmospheric conditions and no correction factor is required on the electric field sensors

Tailoring the refractive index of Ge-S based glass for 3D embedded waveguides operating in the mid-IR region

The photosensitivity of GeSx binary glasses in response to irradiation to femtosecond pulses at 800 nm is investigated. Samples with three different molecular compositions were irradiated under different exposure conditions. The material response to laser exposure was characterized by both refractometry and micro-Raman spectroscopy. It is shown that the relative content of sulfur in the glass matrix influences the photo-induced refractive index modification. At low sulfur content, both positive and negative index changes can be obtained while at high sulfur content, only a positive index change can be reached. These changes were correlated with variations in the Raman response of exposed glass which were interpreted in terms of structural modifications of the glass network. Under optimized exposure conditions, waveguides with positive index changes of up to 7.8x10−3 and a controllable diameter from 14 to 25 μm can be obtained. Direct inscription of low insertion losses (IL = 3.1 – 3.9 dB) waveguides is demonstrated in a sample characterized by a S/Ge ratio of 4. The current results open a pathway towards the use of Ge-S binary glasses for the fabrication of integrated mid-infrared photonic components.

Using 3D Animations in Teaching Chemistry

This paper discuss possibilities of use of 3D animation as a tool for teaching Chemistry support. The research proposes to investigate the conception process and development of educational animations to use in a Blended Learning environment in undergraduate chemistry. Associated with general chemistry teachers, were raised the demands and difficulties on the content transmission, and the most relevant topics, about "Atomic Theory" with propose to create appropriate animations to meeting needs of themes. Thinking about offering more dynamic materials, we elaborate animations in a format of "micro-documentary", with a length between 4 and 7 minutes. We use the narration aloud to the subject-matter understanding, leaving the external text as a complement of the animation. The conclusions are positives, students accepted well the format and they proved are able to remember, organize and systematize several information presented in animations. These skills don't ensure knowledge acquisition, but may be considered prerequisites to learning occur.

Caracterização e aplicação da Blenda PEDOT : PSS/PVA na construção de eletrodos transparentes e dispositivos eletroluminescentes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Oxidação de carboidratos via catálise metálica não enzimática para aplicação em sensores

This work has main aim of is to propose the synthesis and characterization of nanostructured materials for oxidation of carbohydrates such as glucose, with non-enzymatic catalysis. The proposed pathway of synthesis of metal catalysts is the polyol method and techniques of physical characterization proposals for analysis of prepared catalyst pass through diffraction technique of ray-x (DRX), scanning electron microscopy (SEM) and Energy Dispersive Spectroscopy ray-x (EDX). Technical proposals for the electrochemical characterization of the synthesized catalysts are Cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The prospects of this work are compared by the catalytic activity of the sensor designed with non-enzymatic sensors and biosensors also known in the literature