995 resultados para 329-U1366D


Relevância:

10.00% 10.00%

Publicador:

Resumo:

We report a simple method to directly pattern polymer-based photo luminescent material, i.e. a prepatterned mask is placed a close distance above it. The final structure is a positive replica of the lateral structures in the mask with submicrometer resolution. The comparison of luminescence efficiency before and after patterning indicates almost no degradation in optical property of the material during the experiments. The mechanism of pattern formation is also discussed.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Ti45Zr35Ni17Cu3 amorphous and single icosahedral quasicrystalline powders were synthesized by mechanical alloying and subsequent annealing at 855 K. Microstructure and electrochemical properties of two alloy electrodes were characterized. When the temperature was enhanced from 303 to 343 K, the maximum discharge capacities increased from 86 to 329 mAh g(-1) and 76 to 312 mAh g(-1) for the amorphous and quasicrystalline alloy electrodes, respectively. Discharge capacities of two electrodes decrease distinctly with increasing cycle number. The I-phase is stable during charge/discharge cycles, and the main factors for its discharge capacity loss are the increase of the charge-transfer resistance and the pulverization of alloy particles. Besides the factors mentioned above, the formation of TiH2 and ZrH2 hydrides is another primary reason for the discharge capacity loss of the amorphous alloy electrode.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A series of novel nitrogen- and sulfur-containing conjugated polymers have been synthesized via an acid-induced self polycondensation of functional monomers with methyl sulfinyl group. They exhibit good solubility in common solvents, such as CHCl3, THF, DMF, DMSO, et al; and thus show excellent film-forming properties. They are used as hole-transport layer (HTL) in two-layer light-emitting diodes (ITO/polymer/Alq3/Mg:Ag). The typical turn-on voltage of these diodes is about 4 similar to 5V. The maximum brightness is about 3440cd/m(2) at 20 V. The maximum efficiency is estimated to be 0.15 Im/W at 10V.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The change of Eu3+-surroundings with the Al/B ratio varying from 4.5 to 2 and Eu/(Al + B) = 0.02, was investigated through X-ray diffraction, infrared spectra, excitation and emission spectra, and phonon sideband. The results show coexistence of the crystal phase Al18B4O33 and the amorphous phase and Eu3+ ions of the samples with the Al/B ratio from 3 to 2 are incorporated into the amorphous phase. It was also found that electron-phonon coupling strength decreases with the Al/B ratio from 3 to 2, non-radiative decay rate decreases, resulting in an increase of the Eu3+-emission intensity. (C) 1999 Elsevier Science Ltd. All rights reserved.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The valence of Pr and relationship between bond covalency and T-c in Y1-xPrxBa2Cu3O7 (x = 0-1) have been studied using complex chemical bond theory. The results indicate that the depression of superconductivity in Y1-xPrxBa2Cu3O7 can be reasonably explained by bond covalency difference for the bonds between CuO2 plane and CuO chain. T-c decreases with the decreasing of bond covalency difference and reaches zero when bond covalency difference is zero (or bond covalency in CuO2 exceeds that in CuO chain) at Pr concentration 0.55 and valence +3.30. These are in good agreement with the experiments and meanwhile suggest that the valence of Pr is + 3.30 in Y1-xPrxBa2Cu3O7. The results also indicate that for Pr valence less than +3.15, superconductivity always exists for whatever Pr concentration, whereas for Pr with a valence of +4.0, superconductivity disappears as soon as Pr concentration exceeds 0.19. This supports with the viewpoint that higher valence Pr will contribute more electrons to CuO2 plane, filling the mobile holes responsible for conduction. For PrBa2Cu3O7 with no Ba-site Pr, our calculation suggests that it will be a superconductor if the average valence of Pr is less than +3.15. (C) 1998 Published by Elsevier Science B.V. All rights reserved.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A new side chain liquid crystalline poly[4-(methacryloxy)hexanoloxy-4'-benzyloxy biphenyl] was synthesized. The phase behavior of the monomer and homopolymer was studied. The monomer shows a smectic B phase, while the homopolymer shows a nematic phase. The nonmesogenic nonlinear optical group was introduced to synthesize a series of side chain liquid crystalline copolymers which also show a nematic phase. Owing to the liquid crystallinity of the copolymer has been the orientational stability improved, down the relax of the orientation slowed and the nonlinear optical properties enhanced.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Blends of HDPE in more LDPE, with appropriate heat treatment, produce a dispersion of separate entities of HDPE in a matrix of LDPE. The system offered an especially favourable means of studying the deformation of melt-crystallized lamellae. It has been found that sheaf-like spherulites are transformed under tensile deformation into hourglass shapes i.e. a double cone aligned along the drawing direction with origin in the center of the object. This is a consequence of different modes of deformation according to the relation of an individual lamella to the tensile axis. The work shows that the lamellae have not undergone melting and recrystallization in the deformation process at room temperature.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

聚合物熔体结晶由于链缠结等因素的影响,其形态结构非常复杂,这给研究结晶聚合物的微观结构,特别是聚合物在拉伸过程中的形态变化带来很大困难.本文将高密度聚乙烯(HDPE)和低密度聚乙烯(LDPE)两种不相容的组分进行共混,使少量HDPE分散在LDPE中,…

Relevância:

10.00% 10.00%

Publicador:

Resumo:

采用新型稀土催化体系氯代三氟乙酸钕(Nd)-烷基铝(Al)-卤代烃(X),引发苯乙烯(St)均聚及其与异戊二烯(Ip)共聚。研究了催化体系各组分及陈化方式、X和Al种类及用量、溶剂种类等因素对苯乙烯聚合的影响,并用稀土催化剂实现了St-Ip嵌段共聚。用IR,NMR及DSC等方法表征了聚合物的结构,合成出的St-Ip二嵌段共聚物中,Ip链节以反式-1,4-结构为主,含少量3,4-结构,几乎不含顺式-1,4-结构。

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Stable bilayer thin films of indium tin oxide (ITO) on CdS and CdS on ITO were formed for the window material of solar cells by chemical bath and sputtering methods. Scanning electron microscopy and X-ray diffraction studies have shown that both the ITO and CdS films are continuous, homogeneous, with high compactness. Measurement of the CdS film thickness across the 2 x 4 cm(2) reveals the good uniformity of these films. Four-point probe measurements show that the resistivity of a CdS film on an ITO surface is much better than that of the single CdS film The thermal stability of an ITO/CdS bilayer, interfacial reaction and optical transmittance were investigated at different annealing temperatures and environments (air, vacuum and N-2 + H-2). The results showed that the ITO/CdS bilayer film is a good window material for the CuInSe2 and CdTe cells. It is a simple method using a small amount of the cadmium compound.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

活性炭表面含氧基团的生成及对NO的还原作用*高志明杨向光吴越**(中国科学院长春应用化学研究所,长春130022)关键词活性炭,一氧化氮,氧化铜,还原,氧化近几年,随着环保研究的开展,活性炭被用于同时脱硫脱硝反应[1].活性炭的表面化学性质就成为需要…

Relevância:

10.00% 10.00%

Publicador:

Resumo:

New comblike polymers(CP) have been synthesized by reacting monomethyl ether of polyethylene glycol(PEGME) with poly(methyl vinyl ether-alt-maleic anhydride)(MA) and endcapping the residual carboxylic acid with methanol. Butanone was selected as a solvent for the esterification reaction in order to obtain a completely soluble product. They were characterized by IR, C-13 NMR and elemental analysis.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Polyvinyl alcohol amidoxime (PVAAO) chelate fiber prepared in our laboratory is a good adsorbent. Comparing with other adsorbents, it has many advantages, such as higher hydrophilicity, better adsorbability and easier synthesis. In this work, the synthesi

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The composition and structures of Li-Ti-La mixed oxides as well as their catalytic activity for methane oxidative coupling have been studied by means of XRD XPS, IR, SEM and so on. The results indicate that by changing x value in Li-La1-xTixO2 oxides phas

Relevância:

10.00% 10.00%

Publicador:

Resumo:

研究了Ti-La-Li三元氧化物的组成、结构及其对甲烷氧化偶联反应的催化性能;用XRD、IR、XPS和SEM等方法对催化剂进行表征,结果表明:在Li-TixLa1-xO2系列催化剂中,随x值的不同,可生成LaTi1-yLiyO3-λ、、Li2TiO3、La0.66TiO2.993、La2O3和Li1.33Ti1.66O4几种物相,其中,钙钛矿到三元复合氧化物LaTi1-yLiyO3-λ是甲烷氧化偶联反应的主要活性相,活性位Li+-O--Ti3+的形成是活性提高的主要原因.Li2TiO3和La0.66TiO2.993是深度氧化活性相,而Li1.33Ti1.66O4既无偶联活性,也无深度氧化活性.