Reconstruction of a multi-vent kimberlite eruption from deposit and host rock characteristics: Jericho kimberlite, Nunavut, Canada

The Jericho kimberlite (173.1. ±. 1.3. Ma) is a small (~. 130. ×. 70. m), multi-vent system that preserves products from deep (>. 1. km?) portions of kimberlite vents. Pit mapping, drill core examination, petrographic study, image analysis of olivine crystals (grain size distributions and shape studies), and compositional and mineralogical studies, are used to reconstruct processes from near-surface magma ascent to kimberlite emplacement and alteration. The Jericho kimberlite formed by multiple eruptions through an Archean granodiorite batholith that was overlain by mid-Devonian limestones ~. 1. km in thickness. Kimberlite magma ascended through granodiorite basement by dyke propagation but ascended through limestone, at least in part, by locally brecciating the host rocks. After the first explosive breakthrough to surface, vent deepening and widening occurred by the erosive forces of the waxing phase of the eruption, by gravitationally induced failures as portions of the vent margins slid into the vent and, in the deeper portions of the vent (>. 1. km), by scaling, as thin slabs burst from the walls into the vent. At currently exposed levels, coherent kimberlite (CK) dykes (<. 40. cm thick) are found to the north and south of the vent complex and represent the earliest preserved in-situ products of Jericho magmatism. Timing of CK emplacement on the eastern side of the vent complex is unclear; some thick CK (15-20. m) may have been emplaced after the central vent was formed. Explosive eruptive products are preserved in four partially overlapping vents that are roughly aligned along strike with the coherent kimberlite dyke. The volcaniclastic kimberlite (VK) facies are massive and poorly sorted, with matrix- to clast-supported textures. The VK facies fragmented by dry, volatile-driven processes and were emplaced by eruption column collapse back into the volcanic vents. The first explosive products, poorly preserved because of partial destruction by later eruptions, are found in the central-east vent and were formed by eruption column collapse after the vent was largely cleared of country rock debris. The next active vent was either the north or south vent. Collapse of the eruption column, linked to a vent widening episode, resulted in coeval avalanching of pipe margin walls into the north vent, forming interstratified lenses of country rock-rich boulder breccias in finer-grained volcaniclastic kimberlite. South vent kimberlite has similar characteristics to kimberlite of the north vent and likely formed by similar processes. The final eruptive phase formed olivine-rich and moderately sorted deposits of the central vent. Better sorting is attributed to recycling of kimberlite debris by multiple eruptions through the unconsolidated volcaniclastic pile and associated collapse events. Post-emplacement alteration varies in intensity, but in all cases, has overprinted the primary groundmass and matrix, in CK and VK, respectively. Erosion has since removed all limestone cover.

The influence of family history of hypertension on disease prevalence and associated metabolic risk factors among Sri Lankan adults

Background Hypertension is a major contributor to the global non-communicable disease burden. Family history is an important non-modifiable risk factor for hypertension. The present study aims to describe the influence of family history (FH) on hypertension prevalence and associated metabolic risk factors in a large cohort of South Asian adults, from a nationally representative sample from Sri Lanka. Methods A cross-sectional survey among 5,000 Sri Lankan adults, evaluating FH at the levels of parents, grandparents, siblings and children. A binary logistic regression analysis was performed in all patients with ‘presence of hypertension’ as dichotomous dependent variable and using family history in parents, grandparents, siblings and children as binary independent variables. The adjusted odds ratio controlling for confounders (age, gender, body mass index, diabetes, hyperlipidemia and physical activity) are presented below. Results In all adults the prevalence of hypertension was significantly higher in patients with a FH (29.3 %, n = 572/1951) than those without (24.4 %, n = 616/2530) (p < 0.001). Presence of a FH significantly increased the risk of hypertension (OR:1.29; 95 % CI:1.13-1.47), obesity (OR:1.36; 95 % CI: 1.27–1.45), central obesity (OR:1.30; 95 % CI 1.22–1.40) and metabolic syndrome (OR:1.19; 95 % CI: 1.08–1.30). In all adults presence of family history in parents (OR:1.28; 95 % CI: 1.12–1.48), grandparents (OR:1.34; 95 % CI: 1.20–1.50) and siblings (OR:1.27; 95 % CI: 1.21–1.33) all were associated with significantly increased risk of developing hypertension. Conclusions Our results show that the prevalence of hypertension was significantly higher in those with a FH of hypertension. FH of hypertension was also associated with the prevalence of obesity, central obesity and metabolic syndrome. Individuals with a FH of hypertension form an easily identifiable group who may benefit from targeted interventions.

Water transformed: Sustainable water solutions for climate change adaptation

This online textbook provides free access to a comprehensive education and training package that brings together the knowledge of how countries, specifically Australia, can adapt to climate change. This resource has been developed formally as part of the Federal Government’s Department of Climate Change’s Climate Change Adaptation Professional Skills program.

Patent-busting: The public patent foundation, gene patents and the Seed Wars

This chapter considers the Public Patent Foundation as a novel institution in the patent framework. It contends that such a model can play a productive role in challenging the validity of high-profile patents; working as an amicus curiae in significant court cases; and also promoting patent law reform. However, there are limits to the ‘patent-busting’ of the Foundation. The not-for-profit legal services organization has only had the time and resources to challenge a number of noteworthy patents. Other jurisdictions – such as Australia – lack such public-spirited "patent-busting" entities. This chapter considers a number of key disputes involving the Public Patent Foundation. Part I examines the role of the Public Patent Foundation in the landmark dispute over Myriad Genetics’ patents in respect of breast cancer and ovarian cancer. Part II considers the role of the Public Patent Foundation in litigation between organic farmers and Monsanto. Part III examines the role of the Public Patent Foundation in larger debates about patent law reform in the United States – particularly looking at the Leahy-Smith America Invents Act 2011 (US). The conclusion contends that the patent-busting model of the Public Patent Foundation should be emulated in respect of other technological fields, and other jurisdictions – such as Australia. The initiative could also be productively applied to other forms of intellectual property – such as trade mark law, designs law, plant breeders’ rights, plant breeders’ rights, and access to genetic resources.

Modelling milling train performance

This paper describes recent updates to a milling train extraction model used to assess and predict the performance of a milling train. An extension was made to the milling unit model for the bagasse mills to replace the imbibition coefficient with crushing factor and mixing efficiency. New empirical relationships for reabsorption factor, imbibition coefficient, crushing factor, mixing efficiency and purity ratio were developed. The new empirical relationships were tested against factory measurements and previous model predictions. The updated model has been implemented in the SysCAD process modelling software. New additions to the model implementation include: a shredder model to assess or predict cane preparation, mill and shredder drives for power consumption and an updated imbibition control system to add allow water to be added to intermediate mills.

Bivariate genome-wide association study of genetically correlated neuroimaging phenotypes from DTI and MRI through a seemingly unrelated regression model

Large multisite efforts (e.g., the ENIGMA Consortium), have shown that neuroimaging traits including tract integrity (from DTI fractional anisotropy, FA) and subcortical volumes (from T1-weighted scans) are highly heritable and promising phenotypes for discovering genetic variants associated with brain structure. However, genetic correlations (rg) among measures from these different modalities for mapping the human genome to the brain remain unknown. Discovering these correlations can help map genetic and neuroanatomical pathways implicated in development and inherited risk for disease. We use structural equation models and a twin design to find rg between pairs of phenotypes extracted from DTI and MRI scans. When controlling for intracranial volume, the caudate as well as related measures from the limbic system - hippocampal volume - showed high rg with the cingulum FA. Using an unrelated sample and a Seemingly Unrelated Regression model for bivariate analysis of this connection, we show that a multivariate GWAS approach may be more promising for genetic discovery than a univariate approach applied to each trait separately.

National Profiles of In-Country Capacity to Support Disability-Inclusive Education; Fiji, Samoa, Soloman Islands and Vanuatu

This publication emanates from the four-country research project entitled “Strengthening capacity for disability-inclusive education development policy formulation, implementation and monitoring in the South Pacific region” funded by the Australian Development Research Award Scheme (ADRAS) and conducted jointly by the academic staff from the Queensland University of Technology and the University of the South Pacific.

VFT performance of a 180/110 mm co-axial gap in SF6 up to 4 bar absolute

Disconnector switch operation in GIS generates VFT voltages in the system. It is important, for insulation co-ordination purposes, to obtain accurate VFT V-t data for typical gap geometries found in GIS. This paper presents experimentally obtained VFT V-t data for a 180/1 lOmm co-axial gap. The VFT has a time to first peak of 35 ns and a oscillation frequency of 13,6 MHz. Due to the location of the voltage divider in a compartment adjacent to the gap, a correction factor of 1.1 is used to relate the measured breakdown voltage to that in the gap. Positive polarity VFT V-t data is presented for 1, 2, 3 and 4 bar absolute and negative polarity VFT data for 3 and 4 bar absolute. Two methods of generating the VFT's are used. The first is to power up the test transformer at power frequency. The second is to generate a switching impulse by discharging a capacitor into the primary of the test transformer.

Trick or treaty?: The Australian debate over the Anti-Counterfeiting Trade Agreement

The secretive 2011 Anti-Counterfeiting Trade Agreement – known in short by the catchy acronym ACTA – is a controversial trade pact designed to provide for stronger enforcement of intellectual property rights. The preamble to the treaty reads like pulp fiction – it raises moral panics about piracy, counterfeiting, organised crime, and border security. The agreement contains provisions on civil remedies and criminal offences; copyright law and trademark law; the regulation of the digital environment; and border measures. Memorably, Susan Sell called the international treaty a TRIPS Double-Plus Agreement, because its obligations far exceed those of the World Trade Organization's TRIPS Agreement 1994, and TRIPS-Plus Agreements, such as the Australia-United States Free Trade Agreement 2004. ACTA lacks the language of other international intellectual property agreements, which emphasise the need to balance the protection of intellectual property owners with the wider public interest in access to medicines, human development, and transfer of knowledge and technology. In Australia, there was much controversy both about the form and the substance of ACTA. While the Department of Foreign Affairs and Trade was a partisan supporter of the agreement, a wide range of stakeholders were openly critical. After holding hearings and taking note of the position of the European Parliament and the controversy in the United States, the Joint Standing Committee on Treaties in the Australian Parliament recommended the deferral of ratification of ACTA. This was striking as representatives of all the main parties agreed on the recommendation. The committee was concerned about the lack of transparency, due process, public participation, and substantive analysis of the treaty. There were also reservations about the ambiguity of the treaty text, and its potential implications for the digital economy, innovation and competition, plain packaging of tobacco products, and access to essential medicines. The treaty has provoked much soul-searching as to whether the Trick or Treaty reforms on the international treaty-making process in Australia have been compromised or undermined. Although ACTA stalled in the Australian Parliament, the debate over it is yet to conclude. There have been concerns in Australia and elsewhere that ACTA will be revived as a ‘zombie agreement’. Indeed, in March 2013, the Canadian government introduced a bill to ensure compliance with ACTA. Will it be also resurrected in Australia? Has it already been revived? There are three possibilities. First, the Australian government passed enhanced remedies with respect to piracy, counterfeiting and border measures in a separate piece of legislation – the Intellectual Property Laws Amendment (Raising the Bar) Act 2012 (Cth). Second, the Department of Foreign Affairs and Trade remains supportive of ACTA. It is possible, after further analysis, that the next Australian Parliament – to be elected in September 2013 – will ratify the treaty. Third, Australia is involved in the Trans-Pacific Partnership negotiations. The government has argued that ACTA should be a template for the Intellectual Property Chapter in the Trans-Pacific Partnership. The United States Trade Representative would prefer a regime even stronger than ACTA. This chapter provides a portrait of the Australian debate over ACTA. It is the account of an interested participant in the policy proceedings. This chapter will first consider the deliberations and recommendations of the Joint Standing Committee on Treaties on ACTA. Second, there was a concern that ACTA had failed to provide appropriate safeguards with respect to civil liberties, human rights, consumer protection and privacy laws. Third, there was a concern about the lack of balance in the treaty’s copyright measures; the definition of piracy is overbroad; the suite of civil remedies, criminal offences and border measures is excessive; and there is a lack of suitable protection for copyright exceptions, limitations and remedies. Fourth, there was a worry that the provisions on trademark law, intermediary liability and counterfeiting could have an adverse impact upon consumer interests, competition policy and innovation in the digital economy. Fifth, there was significant debate about the impact of ACTA on pharmaceutical drugs, access to essential medicines and health-care. Sixth, there was concern over the lobbying by tobacco industries for ACTA – particularly given Australia’s leadership on tobacco control and the plain packaging of tobacco products. Seventh, there were concerns about the operation of border measures in ACTA. Eighth, the Joint Standing Committee on Treaties was concerned about the jurisdiction of the ACTA Committee, and the treaty’s protean nature. Finally, the chapter raises fundamental issues about the relationship between the executive and the Australian Parliament with respect to treaty-making. There is a need to reconsider the efficacy of the Trick or Treaty reforms passed by the Australian Parliament in the 1990s.

Behaviour and strength of hollow flange channel sections under torsion and bending

Hollow flange channel section is a cold-formed high-strength and thin-walled steel section with a unique shape including two rectangular hollow flanges and a slender web. Due to its mono-symmetric characteristics, it will also be subjected to torsion when subjected to transverse loads in practical applications. Past research on steel beams subject to torsion has concentrated on open sections while very few steel design standards give suitable design rules for torsion design. Since the hollow flange channel section is different from conventional open sections, its torsional behaviour remains unknown to researchers. Therefore the elastic behaviour of hollow flange channel sections subject to uniform and non-uniform torsion, and combined torsion and bending was investigated using the solutions of appropriate differential equilibrium equations. The section torsion shear flow, warping normal stress distribution, and section constants including torsion constant and warping constant were obtained. The results were compared with those from finite element analyses that verified the accuracy of analytical solutions. Parametric studies were undertaken for simply supported beams subject to a uniformly distributed torque and a uniformly distributed transverse load applied away from the shear centre. This paper presents the details of this research into the elastic behaviour and strength of hollow flange channel sections subject to torsion and bending and the results.

Buckling behaviour and design of tapered steel lighting masts

Tapered tubular steel masts are commonly used to support floodlights in a range of applications. The design of these slender tapered masts requires a rational elastic flexural buckling analysis as the thickness also varies with height. Therefore a series of finite element analyses of tapered masts with varying geometry parameters was conducted to develop an elastic flexural buckling load formula. This paper briefly discusses the design methods, and then presents the details of the finite element analyses and the results. 1–Associate Professor of Civil Engineering, and Director, Physical Infrastructure Centre 2–Former BE (Civil) Student, QUT

Comparative analysis and distribution of Omega-3 lcPUFA Biosynthesis genes in marine molluscs

Recent research has identified marine molluscs as an excellent source of omega-3 long-chain polyunsaturated fatty acids (lcPUFAs), based on their potential for endogenous synthesis of lcPUFAs. In this study we generated a representative list of fatty acyl desaturase (Fad) and elongation of very long-chain fatty acid (Elovl) genes from major orders of Phylum Mollusca, through the interrogation of transcriptome and genome sequences, and various publicly available databases. We have identified novel and uncharacterised Fad and Elovl sequences in the following species: Anadara trapezia, Nerita albicilla, Nerita melanotragus, Crassostrea gigas, Lottia gigantea, Aplysia californica, Loligo pealeii and Chlamys farreri. Based on alignments of translated protein sequences of Fad and Elovl genes, the haeme binding motif and histidine boxes of Fad proteins, and the histidine box and seventeen important amino acids in Elovl proteins, were highly conserved. Phylogenetic analysis of aligned reference sequences was used to reconstruct the evolutionary relationships for Fad and Elovl genes separately. Multiple, well resolved clades for both the Fad and Elovl sequences were observed, suggesting that repeated rounds of gene duplication best explain the distribution of Fad and Elovl proteins across the major orders of molluscs. For Elovl sequences, one clade contained the functionally characterised Elovl5 proteins, while another clade contained proteins hypothesised to have Elovl4 function. Additional well resolved clades consisted only of uncharacterised Elovl sequences. One clade from the Fad phylogeny contained only uncharacterised proteins, while the other clade contained functionally characterised delta-5 desaturase proteins. The discovery of an uncharacterised Fad clade is particularly interesting as these divergent proteins may have novel functions. Overall, this paper presents a number of novel Fad and Elovl genes suggesting that many mollusc groups possess most of the required enzymes for the synthesis of lcPUFAs.

Visual openness in urban environments: Measuring visual openness and visibility to natural landscapes in a changing urban landscape in Gold Coast, Australia

The visual characteristics of urban environments have been changing dramatically with the growth of cities around the world. Protection and enhancement of landscape character in urban environments have been one of the challenges for policy makers in addressing sustainable urban growth. Visual openness and enclosure in urban environments are important attributes in perception of visual space which affect the human interaction with physical space and which can be often modified by new developments. Measuring visual openness in urban areas results in more accurate, reliable, and systematic approach to manage and control visual qualities in growing cities. Recent advances in techniques in geographic information systems (GIS) and survey systems make it feasible to measure and quantify this attribute with a high degree of realism and precision. Previous studies in this field do not take full advantage of these improvements. This paper proposes a method to measure the visual openness and enclosure in a changing urban landscape in Australia, on the Gold Coast, by using the improved functionality in GIS. Using this method, visual openness is calculated and described for all publicly accessible areas in the selected study area. A final map is produced which shows the areas with highest visual openness and visibility to natural landscape resources. The output of this research can be used by planners and decision-makers in managing and controlling views in complex urban landscapes. Also, depending on the availability of GIS data, this method can be applied to any region including non-urban landscapes to help planners and policy-makers manage views and visual qualities.

Introduction: Who rules Japan?

This chapter reviews the debate about who governs Japan and considers the implications of legal system reforms initiated by the Justice System Reform Council report of 2001.