995 resultados para 1995_08021439 CTD-70 4901902
Resumo:
This monograph object of analysis is the agriculture modernization in Brazil between 1960 and 1980, highlighting the discussion of the economic and politic ideas around the Brazilian agrarian question. The first parte presents an introduction about this issue and the theoretical positions, as well as social and economic implications for the development of the productive forces on rural areas. Nevertheless, reflections of its development to the economy as a whole, highlighting the way the income distribution and concentration was realized. On the second part its presented the agriculture modernization Project on the centralized militar government point of view, by the propositions of that time Agriculture Minister, Antônio Delfim Netto. The approach is made through the proposals precreeded by the Rural Worker Statute and the Land Statute, before the Military Coup, with its news counterpoints settled in law by the Agriculture Modernization Project installed in 1964; the concessions of funding grants and subsidized credits; the relationship between the authoritarian State and the militarization of the land conflicts. The third part deals with the salary dinamics, income and profit on the modernized rural economy created by the agroindustrial productions system. Lastly the conclusion cross the economic and social results of the agrarian question evolution, to the Brazilian agriculture modernization on income distribution
Resumo:
In this work a study of an API 5L X70 steel, which is used in the manufacture of oil and gas pipelines, has been made. This class of steel show high strength and ductility values, and has been increasingly studied due the growing demand of oil and natural gas, which in consequence, increases the needing of new pipelines to transport them. The material studied has been directly taken from a tube provided by TenarisConfab, and a special attention has been given to the fatigue crack growth rate study, which proved that a crack will grow at different rates according to the tube position where it is growing
Resumo:
Pressure vessels are equipments that require a great care because of their high cost and human life risk in case of fail, and its fabrication methods are different for each manufacturer. Normally, pressure vessels and its parts are fabricated by welding, which may change local properties of metals. The head of a pressure vessel is a very important structural component and it is fabricated by welding and mechanical conformation. Because its excellent mechanical properties, de steel A-516 Grade 70 is often used in manufacturing of large pressure vessels that are subjected to high pressure and temperature, but was verified that its mechanical resistance is decreased when submitted to a tension relief heat treatment. By experience it was defined that before mechanical conformation of the head of a large pressure vessel, the steel should be submitted to a stress relief heat treatment in order to facilitate the mechanical conformation, but there is no quantitative analysis to prove this method and study its possible risks. In the present work the steel A-516 Grade 70 demonstrated a decrease of its mechanical resistance when submitted to a stress relief heat treatment, but keeping above the minimum limit defined in the literature. By other side its ductility was substantially increased, being possible to deduce that the stress relief heat treatment before mechanical conformation is a viable e recommended technique, but with reservations. With the data acquired during the fabrication e preparation of the specimen and the result of the tests, it was possible to elaborate a welding procedure that provides the same results obtained in this present work
Resumo:
Pós-graduação em História - FCHS
Resumo:
Pós-graduação em Agronomia (Produção Vegetal) - FCAV
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Boletim elaborado pela Assessoria de Comunicação e Imprensa da Reitoria da UNESP
Resumo:
Revista elaborada pela Assessoria de Comunicação e Imprensa da Reitoria da UNESP
Resumo:
We compare the photoemission and electron energy loss spectra of crystalline poly(vinylidene-fluoride with trifluoroethylene: 70%: 30%), P(VDF–TrFE), films, fabricated by the Langmuir–Blodgett technique and annealed in vacuum, with in situ thermally evaporated films of poly(vinylidene-fluoride) (PVDF) in vacuum. The electronic structure and vibrational modes of the short chain PVDF films compare well with the crystalline P(VDF–TrFE) films indicating that vacuum annealed films prepared ex situ are free of significant surface contamination once vacuum annealed. The electronic structure for the short chain PVDF films exhibits, however, different temperature dependence than the crystalline P(VDF–TrFE) films. PACS: 68.47.Mn; 71.20.Rv; 63.22.+m; 73.22.-f
Resumo:
The physical aspects of the Subtropical Shelf Front (STSF) for the Southwest Atlantic Continental Shelf were previously described. However, only scarce data on the biology of the front is available in the literature. The main goal of this paper is to describe the physical, chemical and biological properties of the STSF found in winter 2003 and summer 2004. A cross-section was established at the historically determined location of the STSF. Nine stations were sampled in winter and seven in summer. Each section included a series of conductivity-temperature-depth (CTD) stations where water samples from selected depths were filtered for nutrient determination. Surface samples were taken for chlorophyll a (Chl-a) determination and plankton net tows carried out above and below the pycnocline. Results revealed that winter was marked by an inner-shelf salinity front and that the STSF was located on the mid-shelf The low salinity waters in the inner-shelf indicated a strong influence of freshwater, with high silicate (72 mu M), suspended matter (45 mg l(-1)), phosphate (2.70 mu M) and low nitrate (1.0 mu M) levels. Total dissolved nitrogen was relatively high (22.98 mu M), probably due to the elevated levels of organic compound contribution close to the continental margin. Surface Chl-a concentration decreased from coastal well-mixed waters, where values up to 8.0 mg m(-3) were registered, to offshore waters. Towards the open ocean, high subsurface nutrients values were observed, probably associated to South Atlantic Central Waters (SACW). Zooplankton and ichthyoplankton abundance followed the same trend; three different groups associated to the inner-, mid- and outer-shelf region were identified. During summer, diluted waters extended over the shelf to join the STSF in the upper layer; the concentration of inorganic nutrients decreased in shallow waters; however, high values were observed between 40 and 60 m and in deep offshore waters. Surface Chl-a ranged 0.07-1.5 mg m(-3); winter levels were higher. Three groups of zoo and ichthyoplankton, separated by the STSF, were also identified. Results of the study performed suggest that the influence of freshwater was stronger during winter and that abundance distribution of Chl-a, copepods and ichthyoplankton was related to the Plata Plume Waters (PPW), rather than to the presence of the STSF. During summer, when the presence of freshwater decreases, plankton interactions seem to take place in the STSF. (C) 2008 Elsevier Ltd. All rights reserved.
Resumo:
Novel water-soluble decacationically armed C-60 and C-70 decaiodide monoadducts, C-60- and C-70[>M(C3N6+C3)(2)], were synthesized, characterized, and applied as photosensitizers and potential nano-PDT agents against pathogenic bacteria and cancer cells. A high number of cationic charges per fullerene cage and H-bonding moieties were designed for rapid binding to the anionic residues displayed on the outer parts of bacterial cell walls. In the presence of a high number of electron-donating iodide anions as parts of quaternary ammonium salts in the arm region, we found that C-70[>M(C3N6+C3)(2)] produced more HO center dot than C-60[>M(C3N6+C3)(2)], in addition to O-1(2). This finding offers an explanation of the preferential killing of Gram-positive and Gram-negative bacteria by C-60[>M(C3N6+C3)(2)] and C-70[>M(C3N6+C3)(2)], respectively. The hypothesis is that O-1(2) can diffuse more easily into porous cell walls of Gram-positive bacteria to reach sensitive sites, while the less permeable Gram-negative bacterial cell wall needs the more reactive HO center dot to cause real damage.
Resumo:
Heat shock proteins play a key regulatory role in cellular defense. To investigate the role of the inducible 70-kDa heat shock protein (HSP70) in skeletal muscle atrophy and subsequent recovery, soleus (SOL) and extensor digitorum longus (EDL) muscles from overexpressing HSP70 transgenic mice were immobilized for 7 days and subsequently released from immobilization and evaluated after 7 days. Histological analysis showed that there was a decrease in cross-sectional area of type II myofiber from EDL and types I and II myofiber from SOL muscles at 7-day immobilization in both wild-type and HSP70 mice. At 7-day recovery, EDL and SOL myofibers from HSP70 mice, but not from wild-type mice, recovered their size. Muscle tetanic contraction decreased only in SOL muscles from wild-type mice at both 7-day immobilization and 7-day recovery; however, it was unaltered in the respective groups from HSP70 mice. Although no effect in a fatigue protocol was observed among groups, we noticed a better contractile performance of EDL muscles from overexpressing HSP70 groups as compared to their matched wild-type groups. The number of NCAM positive-satellite cells reduced after immobilization and recovery in both EDL and SOL muscles from wild-type mice, but it was unchanged in the muscles from HSP70 mice. These results suggest that HSP70 improves structural and functional recovery of skeletal muscle after disuse atrophy, and this effect might be associated with preservation of satellite cell amount.
Resumo:
Objective: To analyze the results of isolated on-pump coronary artery bypass graft surgery (CABG) in patients >= 70 years old in comparison to patients <70 years old. Methods: Patients undergoing isolated CABG were selected for the study. The patients were assigned into two groups: G1 (age >= 70 years old) and G2 (age <70 years old). The endpoints were in-hospital mortality, acute myocardial infarction (AMI), stroke, re-exploration for bleeding, intraaortic balloon pump for circulatory shock, respiratory complications, acute renal failure, mediastinitis, sepsis, atrial fibrillation, and complete atrioventricular block (CAVB). Results: A total of 1,033 were included in the study: G1 comprised 257 (24.8%) patients G2 776 (75.2%). Patients in G1 were more likely to have in-hospital mortality than in G2 (8.9% vs. 3.6%, respectively; P=0.001), while the incidence of AMI was similar (5.8% vs. 5.5%; P=0.87) in G2. More patients in G1 had re-exploration for bleeding (12.1% vs. 6.1%; P=0.003). Compared to G2, G1 had more incidences of respiratory complications (21.4% vs. 9.1%; P<0.001), mediastinitis (5.1% vs. 1.9%; P=0.013), stroke (3.9% vs. 1.3%; P=0.016), acute renal failure (7.8% vs. 1.3%; P<0.001), sepsis (3.9% vs. 1.9%; P=0.003), atrial fibrillation (15.6% vs. 9.8%; P=0.016), and CAVB (3.5% vs. 1.2%; P=0.023). There was no significant difference in the use of the intraaortic balloon pump. In the forward stepwise multivariate logistic regression analysis, age >= 70 years was an independent predictive factor for higher in-hospital mortality (P=0.004), re-exploration for bleeding (P=0.002), sepsis (P=0.002), respiratory complications (P<0.001), mediastinitis (P=0.016), stroke (P=0.029), acute renal failure (P<0.001), atrial fibrillation (P=0.021), and CAVB (P=0.031). Conclusion: This study suggests that patients of age >= 70 years were at increased risk of death and other complications in the CABG's postoperative period in comparison to younger patients.
Resumo:
Se han eliminado páginas en blanco