Magnetic excitations in charge-ordered Nd0.5Ca0.5MnO3: A Brillouin scattering study

Brillouin scattering studies on single crystals of a charge-ordered manganite, Nd0.5Ca0.5MnO3, have been carried out for the first time. The spectra show two modes at similar to 27 GHz (B-mode) and 60 GHz (S-mode). The B-mode frequency and intensity from 300 K to 27 K, covering both the charge ordering transition at 250 K and the antiferromagnetic transition, at 170 K, exactly follow the same temperature dependence as the d.c. magnetic susceptibility. The B-mode is associated With bulk magnetic excitations and the S-mode with surface magnetic excitations of the manganite with ferromagnetic correlations. The study is strongly indicative of the presence of ferromagnetic inhomogeneities in the charge-ordered as well as antiferromagnetic phases.

Purification and properties of trehalase from the thermophilic fungus Humicola lanuginosa

Trehalase (?,?-Trehalosee gludohydrolase, EC 3.2.1.28) was partially solubilized from the thermophilic fungus Humicola lanuginosa RM-B, and purified 184-fold. The purified enzyme was optimally active at 50°C in acetate buffer at pH 5.5. It was highly specific for ?,?-trehalose and had an apparent Km = 0.4 mM at 50°C. None of the other disaccharides tested either inhibited or activated the enzyme. The molecular weight of the enzyme was around 170000. Trehalase from mycelium grown at 40 and 50°C had similar properties. The purified enzyme, in contrast to that in the crude-cell free extract, was less stable. At low concentration, purified trehalase was afforded protection against heat-inactivation by �protective factor(s)� present in mycelial extracts. The �protective factor(s)� was sensitive to proteolytic digestion. It was not diffusable and was stable to boiling for at least 30 min. Bovine serum albumin and casein also protected the enzyme from heat-inactivation.

Studies on the phase transitions in thiourea

Thiourea (CS(NH2)2) is one of the few examples of molecular crystals exhibiting ferroelectric properties. The dielectric constant along the ferroelectric axis [100] shows maxima at 169, 177 and 202 K. An inflection point occurs at 170.5 KZ Following Goldsmith and White the phases are named as I (F.E. below 169 K), II (A.F.E. 169 K

Simultaneous Utilization of Glucose and Sucrose by Thermophilic Fungi

The utilization of mixtures of glucose and sucrose at nonlimiting concentrations was studied in batch cultures of two common thermophilic fungi, Thermomyces lanuginosus and Penicilium duponti. The sucrose-utilizing enzymes (sucrose permease and invertase) in both fungi were inducible. Both sugars were used concurrently,regardless of their relative proportion in the mixture. At the optimal growth temperature (50C), T.lanuginosus utilized sucrose earlier than it did glucose, but at a suboptimal growth temperature (30°C) the two sugars were utilized at nearly comparable rates. The coutilization of the two sugars was most likely possible because (i) invertase was insensitive to catabolite repression by glucose, (ii) the activity and affinity of the glucose transport system were lowered when sucrose was included in the growth medium, and (iii) the activity of the glucose uptake system was also subject to repression by high concentrations of glucose itself. The concurrent utilization of the available carbon sources by thermophilic fungi might be an adaptive strategy for opportunistic growth in nature under conditions of low nutrient availability and thermal fluctuations in the environment.

Thermodynamics of Cobalt (II, III) Oxide (Co3O4): Evidence of Phase Transition

The Gibbs' energy change for the reaction, 3CoO (r.s.)+1/2O2(g)→Co3O4(sp), has been measured between 730 and 1250 K using a solid state galvanic cell: Pt, CuO+Cu2O|(CaO)ZrO2|CoO+Co3O4,Pt. The emf of this cell varies nonlinearly with temperature between 1075 and 1150 K, indicating a second or higher order phase transition in Co3O4around 1120 (±20) K, associated with an entropy change of ∼43 Jmol-1K-1. The phase transition is accompanied by an anomalous increase in lattice parameter and electrical conductivity. The cubic spinel structure is retained during the transition, which is caused by the change in CO+3 ions from low spin to high spin state. The octahedral site preference energy of CO+3 ion in the high spin state has been evaluated as -24.8 kJ mol-1. This is more positive than the value for CO+2 ion (-32.9 kJ mol-1). The cation distribution therefore changes from normal to inverse side during the phase transition. The transformation is unique, coupling spin unpairing in CO+3 ion with cation rearrangement on the spinel lattice, DTA in pure oxygen revealed a small peak corresponding to the transition, which could be differentiated from the large peak due to decomposition. TGA showed that the stoichiometry of oxide is not significantly altered during the transition. The Gibbs' energy of formation of Co3O4 from CoO and O2 below and above phase transition can be represented by the equations:ΔG0=-205,685+170.79T(±200) J mol-1(730-1080 K) and ΔG0=-157,235+127.53T(±200) J mol-1(1150-1250 K).

Uniformly valid analytical solution to the problem of a decaying shock wave

An explicit representation of an analytical solution to the problem of decay of a plane shock wave of arbitrary strength is proposed. The solution satisfies the basic equations exactly. The approximation lies in the (approximate) satisfaction of two of the Rankine-Hugoniot conditions. The error incurred is shown to be very small even for strong shocks. This solution analyses the interaction of a shock of arbitrary strength with a centred simple wave overtaking it, and describes a complete history of decay with a remarkable accuracy even for strong shocks. For a weak shock, the limiting law of motion obtained from the solution is shown to be in complete agreement with the Friedrichs theory. The propagation law of the non-uniform shock wave is determined, and the equations for shock and particle paths in the (x, t)-plane are obtained. The analytic solution presented here is uniformly valid for the entire flow field behind the decaying shock wave.

Rigid and flexible region in lysozyme and the invariant features in its hydration shell

Water-mediated transformations provide a useful handle for exploring the flexibility in protein molecules and the invariant features in their hydration shells. Low-humidity monoclinic hen egg white lysozyme, resulting from such a transformation, has perhaps the lowest solvent content observed in any protein crystal so far and has a well-ordered structure. A detailed comparison involving this structure, low-humidity tetragonal lysozyme, and the other available refined crystal structures of the enzyme permits the delineation of the relatively rigid, moderately flexible and highly flexible regions of the molecule. The relatively rigid region forms a contiguous structural unit close to the molecular centroid and encompasses parts of of the main beta-structure and three alpha-helices. The hydration shell of the protein contains 30 invariant water molecules. Many of them are involved in holding different parts of the molecule together or in stabilizing local structure. Five of the six invariant water molecules attached to the substrate-binding region form part of a water cluster contiguous with the side-chains of the catalytic residues Glu-35 and Asp-52.

Eri maitohappobakteerien ja niiden annostustason vaikutus säilörehun käymislaatuun ja aerobiseen stabiilisuuteen

Tämän maisterin tutkielman tarkoituksena oli testata eri maitohappobakteerien ja niiden annostustason vaikutusta säilörehun käymislaatuun ja aerobiseen stabiilisuuteen. Biologisilla säilöntäaineilla eli ympeillä säilöttyjen rehujen laatua verrattiin kontrolleina toimiviin painorehuun ja muurahaishapolla tehtyyn rehuun. Koerehut tehtiin Helsingin yliopiston Maataloustieteiden laitoksella 7.6.2010. Timotei (Phleum pratense) - nurminata (Festuca pratensis) kasvusto korjattiin tähkimisen alkuvaiheessa D-arvon ollessa 711 g/kg ka. Nurmikasvuston kuiva-ainepitoisuus oli 170 g/kg heti niiton jälkeen määritettäessä ja neljän tunnin esikuivauksen jälkeen 208 g/kg. Rehuraaka-aine jaettiin kuuteen erään, joihin lisättiin säilöntäaine. Säilöntäainekäsittelyt olivat: 1) ei säilöntäainetta (painorehu), 2) muurahaishappo (100 %:na 4 l/t), 3) Lactobacillus plantarum ja Pediococcus acidilactici 1x10? pmy/g sekä pektinaasi-, ksylanaasi- ja sellulaasientsyymi, 4) L. plantarum 1x10? pmy/g, 5) L. plantarum 1x10? pmy/g ja 6) L. plantarum ja L. buchneri 2x10? pmy/g. Rehut säilöttiin laboratoriosiiloissa kolmena rinnakkaisena. Laboratoriosiilojen lisäksi rehua säilöttiin jokaisesta säilöntäainekäsittelystä kuuteen rinnakkaiseen minisiiloon säilönnän alkuajan fermentaation ja rehujen pH:n muutoksen seuraamiseksi. Minisiiloista seurattiin kaasuntuotantoa 21 päivän ajan. Raaka-aineen koostumus ja rehujen säilönnällinen laatu sekä aerobinen stabiilisuus määritettiin. Säilörehujen kuiva-ainepitoisuus oli suhteellisen pieni (n. 210 g/kg), jotta voitiin testata biologisten säilöntäaineiden tehoa märässä rehussa. Kosteassa rehussa biologisten säilöntäaineiden toiminnan onnistuminen on haastavaa. Koska raaka-aineen sokeripitoisuus oli kuitenkin erittäin suuri (196 g/kg ka), onnistui ymppirehujen säilöntä hyvin. Kaikkien koerehujen pH oli alle 4:n. Painorehu ei täyttänyt hyvän rehun kriteerejä ammoniumtypen osalta. Muurahaishapporehu oli laadultaan tyydyttävää etikkahapon pitoisuuden osalta. Rehussa tapahtui epätyypillistä etanolikäymistä hiivojen toimesta, jonka johdosta rehussa muodostui suuri määrä kaasua säilönnän aikana. Muurahaishapporehu ei kuitenkaan lämmennyt aerobisen stabiilisuuden mittauksen aikana, johtuen todennäköisesti suuresta etikkahapon määrästä ja toisaalta pienestä sokerin määrästä. Maitohappobakteerisäilöntäaineilla saatiin käymislaadultaan parempaa säilörehua verrattuna painorehuun, lukuun ottamatta maitohappobakteeri-entsyymirehua. Entsyymilisäyksestä ei todennäköisesti ollut hyötyä rehun säilöntälaadun kannalta. Raaka-aineen suuren sokeripitoisuuden johdosta säilörehussa oli koko säilönnän ajan tarpeeksi sokeria maitohappobakteerien käytettäväksi ja sokeri toimi siten substraattina haitallisille mikrobeille tuottaen suuren etikkahappopitoisuuden. Maitohappobakteeri-entsyymiseoksella tehty rehu oli etikkahappopitoisuuden perusteella heikkolaatuista. Lactobacillus plantarumin molemmilla annostustasoilla (1x10? ja 1x10? pmy/g rehua) saatiin laadultaan hyvää rehua. Suuri sokeripitoisuus molemmissa rehuissa johtui todennäköisesti raaka-aineen tavallista suuremmasta sokerin määrästä. Molempien rehujen maitohappo-etikkahappo-suhde oli melko korkea, viitaten homofermentatiiviseen maitohappokäymiseen. Lactobacillus buchneri –lisäyksellä rehu oli säilönnälliseltä laadultaan hyvää. Heterofermentatiivisen ympin lisäys nosti tyypillisesti rehun pH:ta sekä pienensi maitohappoetikkahappo-suhdelukua verrattuna homofermentatiiviseen ymppiin. L. buchneri –lisäys paransi hieman säilörehun aerobista stabiilisuutta verrattuna homofermentatiivisella maitohappobakteerilla säilöttyyn rehuun, mutta tulos ei ollut tilastollisesti merkitsevä.

Analysis of side-chain conformation in proteins

The crystal structures of a number of globular proteins are currently available. An analysis of the distribution of side-chains among different allowed conformations in these proteins has been carried out. The observed conformations of individual residues are discussed on the basis of well-known stereochemical criteria. The population distribution of side-chains in different allowed regions in conformational space can be explained largely on the basis of simple steric considerations. In addition to examining the conformational behaviour of individual residues, some population distributions of conformational angles of general interest involving groups of residues have also been analyzed.

Power System Stabilizers Design for Interconnected Power Systems

This paper proposes a method of designing fixed parameter decentralized power system stabilizers (PSS) for interconnected multi-machine power systems. Conventional design technique using a single machine infinite bus approximation involves the frequency response estimation called the GEP(s) between the AVR input and the resultant electrical torque. This requires the knowledge of equivalent external reactance and infinite bus voltage or their estimated values at each machine. Other design techniques using P-Vr characteristics or residues are based on complete system information. In the proposed method, information available at the high voltage bus of the step-up transformer is used to set up a modified Heffron-Phillip's model. With this model it is possible to decide the structure of the PSS compensator and tune its parameters at each machine in the multi-machine environment, using only those signals that are available at the generating station. The efficacy of the proposed design technique has been evaluated on three of the most widely used test systems. The simulation results have shown that the performance of the proposed stabilizer is comparable to that which could be obtained by conventional design but without the need for the estimation and computation of external system parameters.

Q-band beam waveguide

A report of the design, development ana periom~ance characteristics of a Q-band (8 nim) confoal. mned, aielectric lens beam waveguide is presented.

Q-Band beam wave-guide

Consideration is given to a 25-foot long Q-band (8 mm) confocal, zoned dielectric lens beam waveguide. Numerical expressions for the axial and radial fields are presented. The experimental set-up consisted of uniformly spaced zoned dielectric lenses, a transmitting horn and a receiving horn. It was found that: (1) the wave beam is reiterated when confocal, zoned dielectric lenses act as phase transformers in place of smooth surfaced transformers in beam waveguides; (2) the axial field is oscillatory near the source and the oscillation persists for about 25 cm from the source; (3) the oscillation disappears after one lens is used; (4) higher order modes with higher attenuation rates die out faster than fundamental modes; (5) phase transformers do not alter beam modes; (6) without any lens the beam cross-section broadens significantly in the Z-direction; (7) with one lens the beam exhibits the reiteration phenomenon; and (8) inserting a second lens on the axial and cross-sectional field distribution shows further the reiteration principle.