Daily and seasonal thermal stresses in tilings: a field survey combined with numeric modeling

This study investigates thermally induced tensile stresses in ceramic tilings. Daily and seasonal thermal cycles, as well as, rare but extreme events, such as a hail-storm striking a heated terrace tiling, were studied in the field and by numerical modeling investigations. The field surveys delivered temperature– time diagrams and temperature profiles across tiling systems. These data were taken as input parameters for modeling the stress distribution in the tiling system in order to detect potential sites for material failure. Dependent on the thermal scenario (e.g., slow heating of the entire structure during morning and afternoon, or a rapid cooling of the tiles by a rain storm) the modeling indicates specific locations with high tensile stresses. Typically regions along the rim of the tiling field showed stresses, which can become critical with respect to the adhesion strength. Over the years, ongoing cycles of thermal expansion–contraction result in material fatigue promoting the propagation of cracks. However, the installation of flexible waterproofing membranes (applied between substrate and tile adhesive) represents an efficient technical innovation to reduce such crack propagation as confirmed by both numerical modeling results and microstructural studies on real systems.

Risk charts to guide targeted HIV-1 viral load monitoring of ART: development and validation in patients from resource-limited settings.

BACKGROUND HIV-1 RNA viral load (VL) testing is recommended to monitor antiretroviral therapy (ART) but not available in many resource-limited settings. We developed and validated CD4-based risk charts to guide targeted VL testing. METHODS We modeled the probability of virologic failure up to 5 years of ART based on current and baseline CD4 counts, developed decision rules for targeted VL testing of 10%, 20% or 40% of patients in seven cohorts of patients starting ART in South Africa, and plotted cut-offs for VL testing on colour-coded risk charts. We assessed the accuracy of risk chart-guided VL testing to detect virologic failure in validation cohorts from South Africa, Zambia and the Asia-Pacific. FINDINGS 31,450 adult patients were included in the derivation and 25,294 patients in the validation cohorts. Positive predictive values increased with the percentage of patients tested: from 79% (10% tested) to 98% (40% tested) in the South African, from 64% to 93% in the Zambian and from 73% to 96% in the Asia-Pacific cohorts. Corresponding increases in sensitivity were from 35% to 68% in South Africa, from 55% to 82% in Zambia and from 37% to 71% in Asia-Pacific. The area under the receiver-operating curve increased from 0.75 to 0.91 in South Africa, from 0.76 to 0.91 in Zambia and from 0.77 to 0.92 in Asia Pacific. INTERPRETATION CD4-based risk charts with optimal cut-offs for targeted VL testing may be useful to monitor ART in settings where VL capacity is limited.

Temperature Prediction Model for Bone Drilling Based on Density Distribution and In Vivo Experiments for Minimally Invasive Robotic Cochlear Implantation

Surgical robots have been proposed ex vivo to drill precise holes in the temporal bone for minimally invasive cochlear implantation. The main risk of the procedure is damage of the facial nerve due to mechanical interaction or due to temperature elevation during the drilling process. To evaluate the thermal risk of the drilling process, a simplified model is proposed which aims to enable an assessment of risk posed to the facial nerve for a given set of constant process parameters for different mastoid bone densities. The model uses the bone density distribution along the drilling trajectory in the mastoid bone to calculate a time dependent heat production function at the tip of the drill bit. Using a time dependent moving point source Green's function, the heat equation can be solved at a certain point in space so that the resulting temperatures can be calculated over time. The model was calibrated and initially verified with in vivo temperature data. The data was collected in minimally invasive robotic drilling of 12 holes in four different sheep. The sheep were anesthetized and the temperature elevations were measured with a thermocouple which was inserted in a previously drilled hole next to the planned drilling trajectory. Bone density distributions were extracted from pre-operative CT data by averaging Hounsfield values over the drill bit diameter. Post-operative [Formula: see text]CT data was used to verify the drilling accuracy of the trajectories. The comparison of measured and calculated temperatures shows a very good match for both heating and cooling phases. The average prediction error of the maximum temperature was less than 0.7 °C and the average root mean square error was approximately 0.5 °C. To analyze potential thermal damage, the model was used to calculate temperature profiles and cumulative equivalent minutes at 43 °C at a minimal distance to the facial nerve. For the selected drilling parameters, temperature elevation profiles and cumulative equivalent minutes suggest that thermal elevation of this minimally invasive cochlear implantation surgery may pose a risk to the facial nerve, especially in sclerotic or high density mastoid bones. Optimized drilling parameters need to be evaluated and the model could be used for future risk evaluation.

Adresse An die Hohe constituirende Versammlung der Abgeordneten des Preußischen Staats in Berlin: Hohe Versammlung! Der Ihnen vorliegende neue Gesetzentwurf will im 24. Art. des II. Titels ...

Welsch (Projektbearbeiter): Petition zur Änderung des Artikels 24 der Landesverfassung, um evangelischen Presbyterien ein Mitspracherecht bei der Schulaufsicht zu ermöglichen

Kundmachung: Zur Beruhigung des Publikums, welches in den letzten Tagen durch Gerüchte der aufregendsten Art ...

Welsch (Projektbearbeiter): Dementierung von Gerüchten über Truppenmassierungen sowie über die Entwaffnung der Nationalgarden in Olmütz, Brünn und Graz

Implementation and Operational Research: Risk Charts to Guide Targeted HIV-1 Viral Load Monitoring of ART: Development and Validation in Patients From Resource-Limited Settings.

BACKGROUND HIV-1 RNA viral load (VL) testing is recommended to monitor antiretroviral therapy (ART) but not available in many resource-limited settings. We developed and validated CD4-based risk charts to guide targeted VL testing. METHODS We modeled the probability of virologic failure up to 5 years of ART based on current and baseline CD4 counts, developed decision rules for targeted VL testing of 10%, 20%, or 40% of patients in 7 cohorts of patients starting ART in South Africa, and plotted cutoffs for VL testing on colour-coded risk charts. We assessed the accuracy of risk chart-guided VL testing to detect virologic failure in validation cohorts from South Africa, Zambia, and the Asia-Pacific. RESULTS In total, 31,450 adult patients were included in the derivation and 25,294 patients in the validation cohorts. Positive predictive values increased with the percentage of patients tested: from 79% (10% tested) to 98% (40% tested) in the South African cohort, from 64% to 93% in the Zambian cohort, and from 73% to 96% in the Asia-Pacific cohort. Corresponding increases in sensitivity were from 35% to 68% in South Africa, from 55% to 82% in Zambia, and from 37% to 71% in Asia-Pacific. The area under the receiver operating curve increased from 0.75 to 0.91 in South Africa, from 0.76 to 0.91 in Zambia, and from 0.77 to 0.92 in Asia-Pacific. CONCLUSIONS CD4-based risk charts with optimal cutoffs for targeted VL testing maybe useful to monitor ART in settings where VL capacity is limited.

Collecting the Painted Netherlands: The Art Collection of Ernest of Austria in Brussels

The (art) collection of Archduke Ernest of Austria (1553-1595) is widely unknown when it comes to early-modern Habsburg collections. Ernest, younger brother of Emperor Rudolf II (b. 1552) and educated at the Madrid court, was appointed Governor-General of the Netherlands by King Philip II of Spain, his uncle, in summer 1593. Ernest relocated his court from Vienna to Brussels in early 1594 and was welcomed there with lavish festivities: the traditional Blijde Inkomst, Joyous Entry, of the new sovereign. Unfortunately, the archduke died in February 1595 after residing in Brussels for a mere thirteen months. This investigation aims to shed new light on the archduke and his short-lived collecting ambitions in the Low Countries, taking into account that he had the mercantile and artistic metropolis Antwerp in his immediate reach. I argue, that his collecting ambitions can be traced back to one specific occasion: Ernest’s Joyous Entry into Antwerp in June 1594. There the archduke received a series of six paintings of Pieter Bruegel the Elder (1525/30-1569) known as The Months (painted in 1565), hanging today in separate locations in Vienna, New York and Prague. These works of art triggered Ernest’s collecting ambitions and prompted him to focus mainly on works of art and artefacts manufactured at or traded within the Netherlands during the last eight months of his lifetime. Additionally, it will be shown that the archduke was inspired by the paintings’ motifs and therefore concentrated on acquiring works of art depicting nature and landscape scenes from the 1560s and 1590s. On the basis of the archduke’s recently published account book (Kassabuch) and of the partially published inventory of his belongings, it becomes clear that Ernest of Austria must be seen in line with the better-known Habsburg collectors and that his specific collection of “the painted Netherlands” can be linked directly to his self-fashioning as a rightful sovereign of the Low Countries.