(Tab. XIII.1) TOC content, carbonate content, carbonate mineralogy, percentage of total carbonate, aragonite, low magnesium calcium, and high magnesium calcium, and grain-size contents from samples from the Golfe d'Arguin and from the Western Sahara

Modern carbonate sedimentation takes place on the northern Mauritanian shelf (20°N), where typical tropical components (e.g. hermatypic reefs, calcareous green algae) are absent. Such deposits are reminiscent of extratropical sediment in the geological record. The tropical open shelf of Mauritania is influenced by large siliciclastic dust input and upwelling, highly fertilizing the ocean, as well as strongly limiting the light penetration. In this context, temperature does not appear to be the steering factor of carbonate production. This thesis describes the depositional system of the Golfe d'Arguin off Mauritania and focuses on environmental conditions that control the depositional pattern, in particular carbonate production. The description of this modern analogue provides a tool for paleoenvironmental interpretation of ancient counterparts. The Golfe d'Arguin is a broad shallow shelf comprising extensive shoals (<10 m water depth; i.e. the Banc d'Arguin) on the inner shelf where waters warm up. The sediments collected in water depths between 4 and 600 m are characterized by mixed carbonate and siliciclastic (dust) deposits. They vary from clean coarse-grained, almost pure carbonate loose sediments to siliciclastic-dominated fine-grained sediments. The carbonate content and sediment grain size show a north-south decreasing pattern through the Golfe d'Arguin and are controlled by the hydraulic regime influenced by wind-driven surface currents, swell, and tidal currents. The carbonate grain association is heterozoan. Components include abundant molluscs, foraminifers, and worm tubes, as well as barnacles and echinoderms, elements that are also abundant in extratropical sediments. The spatial distribution of the sedimentary facies of the Golfe d'Arguin does not display a depth zonation but rather a mosaic (i.e. patchy distribution). The depth and climatic signatures of the different sedimentary facies are determined by taxonomic and ecological investigations of the carbonate-secreting biota (molluscs and foraminifers). While certain planktonic foraminifers and molluscs represent upwelling elements, other components (e.g. mollusc and benthic foraminifer taxa) demonstrate the tropical origin of the sediment. The nutrient-rich (and thus also low light-penetration) conditions are reflected in the fact that symbiotic and photosynthetic carbonate-producing organisms (e.g. hermatypic corals) are absent. The Mauritanian deposits represent an environment that is rare in the modern world but might have been more common in the geological past when global temperatures were higher. Taxonomic and ecological studies allow for distinguishing carbonate sediments formed under either tropical high-nutrient or extratropical conditions, thus improving paleoclimate reconstruction.

(Table 1) Physical properties at DSDP Hole 72-516F

Forty indurated sediment samples from Site 516 were studied to determine the cause of acoustic anisotropy in carbonate- bearing deep-sea sediments. Recovered from sub-bottom depths between 388 and 1222 m, the samples have properties exhibiting the following ranges: wet-bulk density, 1.90-2.49 g/cm3; fractional porosity, 0.45-0.14; carbonate content, 33-88%; compressional-wave velocity (at 0.1 kbar pressure), 1.87-4.87 km/s; and anisotropy, 1-13%. Velocities were measured in three mutually perpendicular directions through the same specimen in 29 of the 40 samples studied. Calcite fabric has been estimated by X-ray pole figure goniometry. The major findings of this study are: 1) Carbonate-bearing deep-sea sediments may be regarded as transversely isotropic media with symmetry axes normal to bedding. 2) Calcite c-axes are weakly concentrated in a direction perpendicular to bedding, but the preferred orientation of calcite does not contribute significantly to velocity anisotropy. 3) The properties of bedded and unbedded samples are distinctly different. Unbedded sediments exhibit low degrees of acoustic anisotropy (1-5%). By contrast, bedded samples show higher degrees of anisotropy (to 13%), and anisotropy increases markedly with depth of burial. Thus, bedding must be regarded as the principal cause of acoustic anisotropy in calcareous, deep-sea sediments.

(Table 1) Grain size composition of recent sediments from the eastern Barents Sea shelf

Based on materials on geomorphology, hydrology, lithology, and sedimentation dynamics obtained during cruises of the P.P. Shirshov Institute of Oceanology in the Barents Sea, the author prepared a number of charts on content of the main particle size facies in shelf surface sediments, as well as a chart of lithologic types of sediments in the Barents Sea. Factors of sedimentation control and basic features of distribution of sedimentary material over its bottom area are taken into consideration.

(Table 1) Pollen analysis of clay-gyttja layers obtained in 1966 near Hitzhusen, north Germany

Bereits im Jahre 1956 wurde bei Baugrund-Aufschlußbohrungen für das zweite Kurmittelhaus in Bad Bramstedt bei einer Serie von 11 Bohrungen - ausgeführt durch die Firma Fritz Eising K. G. in Hamburg - in drei benachbart gelegenen Bohrpunkten an der südlichen Ecke des Gebäudes in einer Teufe von ca. 10 m u. T. eine offensichtlich organogene Schicht von ca. 2 m Mächtigkeit erbohrt. Eines dieser Bohrprofile hat folgenden Aufbau: -5,8 m Fein-Mittelsand, -7,7 m Mittelsand, Fein-Mittelkies, -10,0 m Mittelsand, wenig Kies, -12,0 m Gyttja, -15,0 m Mittelsand, Grobsand. Die bereits wiedergegebene Teufenangabe ist insofern recht interessant, als im Jahre 1966 bei der Brücke über die Bramau bei Hitzhusen, demnach in der Talaue der Bramau in einer Teufe von 8,55 m ebenfalls eine Gyttja erbohrt wurde. Die Tiefenlagen beider Vorkommen scheinen sich demnach relativ zu entsprechen. Das gesamte Profil bei Hitzhusen ist in einigen Punkten abweichend ausgebildet und enthält vor allem noch ein zweites Gyttja-Band in 11,25 m Teufe. Im Einzelnen wurde hier durch die Bohrfirma Paul Hammers A. G., Hamburg, diese Schichtfolge angetroffen: -1.55 m Fein-Mittelsand, Humus, -3,10 m Mittel-Grobsand, Kies, Steine, etwas Lehm, -4,50 m Mittel-Grobsand, -7,20 m Mittel-Grobsand, Kies, -8,00 m Grobsand, -8,55 m Grobsand, Kies, -8,65 m Schluff-Gyttja, -9,70 m Fein-Grobsand, -10,25 m Mittel-Grobsand, Kies, -10,75 m Mittel-Grobsand, -11,25 m Mittel-Grobsand, Schluffstreifen, -11,40 m Schluff-Gyttja, -12,10 m Mittelsand, -12,30 m Mittel-Grobsand, Kies, -17,85 m Geschiebemergel. Die gewonnenen Proben der Schluff-Gyttjen wurden näher untersucht. Da es sich in beiden Fällen um geringmächtige Lagen handelt (0,1 m resp. 0,15 m), und das Material durchaus als stark feinsandig bis schluffig zu bezeichnen ist (das spricht für eine wesentlich schnellere Sedimentation, als die einer reinen biogenen Gyttja), ist der Effekt einer 'Mischprobe' weitgehend ausgeschlossen. Außerdem lagen die Proben - obgleich wahrscheinlich mit einem Ventilbohrer gefördert - als relativ ungestörte Brocken mit erhaltengebliebener Feinschichtung vor. Auf den Schichtflächen waren gröbere Pflanzenreste erkennbar (in der Tabelle angegeben). Der sehr hohe mineralische Anteil läßt zunächst den Verdacht auf sekundären Pollen aufkommen. Keines der beiden pollenanalytisch ermittelten Vegetationsbilder liefert dagegen irgendeine Bestätigung hierfür.

Grain size analysis on core plugs of sediment core CRP-1 (Table 1, 2)

Twenty four core samples from CRP-1, seven from Quaternary strata (20-43.55 meters below sea floor or mbsf) and seventeen from early Miocene strata (43.55 to 147.69 mbsf), have been analysed for their grain-size distribution using standard sieve and Sedigraph techniques. The results are in good agreement with estimates of texture made as part of the visual core description for the 1 :20 core logs for CRP-1 (Cape Roberts Science Team, 1998). Interpretation of the analyses presented here takes into account the likely setting of the site in Quaternary times as it is today, with CRP-1 high on the landward flank of a well-defined submarine ridge rising several hundred metres above basins on either side. In contrast, seismic geometries for strata deposited in early Miocene times indicate a generally planar sea floor dipping gently seaward. Fossils from these strata indicate shallow water depths (< 100 m), indicating the possibility that waves and tidal currents may have influenced sea floor sediments. The sediments analysed here are considered in terms of 3 textural facies: diamict, mud (silt and clay) and sand. Most of the Quaternary section but only 30% of the early Miocene section is diamict, a poorly sorted mixture of sand and mud with scattered clasts, indicating little wave or current influence on its texture. Although not definitive, diamict textures and other features suggest that the sediment originated as basal glacial debris but has been subsequently modified by minor winnowing, consistent with the field interpretation of this facies as ice-proximal and distal glaciomarine sediment. Sediments deposited directly from glacier ice appear to be lacking. Mud facies sediments, which comprise only 10% of the Quaternary section but a third of the early Miocene section, were deposited below wave base and largely from suspension, and show features (described elsewhere in this volume) indicative of the influence of both glacial and sediment gravity flow processes. Sand facies sediments have a considerable proportion of mud, normally more than 20%, but a well-sorted fine-very fine sand fraction. In the context of the early Miocene coastal setting we interpret these sediments as shoreface sands close to wave base.

(Table 1) Carbon and carbonate at DSDP Leg 71 Holes

Leg 71 sediments were analyzed for total carbon and acid-insoluble (organic) carbon, using the Leco WR-12 analyzer, according to the standard technique outlined below. The 3 cm**3 sediment samples were first dried and ground into a homogeneous powder. The ground sediment was redried at 105 to 110°C, and two samples, a 0.1 g and a 0.5 g sample, were weighed into Leco clay crucibles. The 0.5 g sample was acidified with 10% hydrochloric acid and washed with distilled water. The sample was then dried and analyzed for acid-insoluble carbon. The 0.1 g sample was analyzed for total carbon without further treatment. If the sample contained less that 10% CaCO3, an additional 0.5 g sample was analyzed for greater accuracy. The calcium carbonate percentages were calculated as follows: (% total C - % organic C) x 8.33 = % CaCO3. Although other carbonates may be present, all acid-soluble carbon was calculated as calcium carbonate.