1000 resultados para Águas de Superfície
Resumo:
Geographic Information Systems (GIS) integrate the technologies related to Geoprocessing, with the ability to manipulate georeferenced information through data storage, management and analysis. One of the GIS applications is the generation of Digital Elevation Models (DEM) as a result of rebuilding the elevation of a region using computation tools and artificial representation. This paper presents the DEM created from a point base in two computational frameworks with different structures (vector and raster), comparing the contour lines generated from these models with the original contour lines from analog cartographic base. It was observed that one of the generated models presented some discrepancies related to real space for both GIS structures. However, using constrained Delaunay's triangulation in raster GIS a digital elevation model was generated with contour lines quite close to the original ones, with satisfactory results. A 3-D terrain representation was also created offering a very useful tool for analysis.
Resumo:
It may be difficult for small and medium cities to obtain information about the fluoride content of public water, because of the lack of equipments and technicians. This study aimed to analyze the fluoride levels of the water supplied by the public treatment stations of 40 cities situated in the northwest region of São Paulo State, during a period of 6 months, to verify if fluoridation occurs in a continuous manner and if the fluoride levels are within the recommended. Maps of the water distribution system were obtained from the water treatment companies and utilized to randomize the addresses of the collection sites, so that they included all regions with treated water sources. One water sample by month was collected and analyzed in duplicate using an ion-specific-electrode. Samples with 0.6 to 0.8 mgF/L were considered acceptable. In the 38 cities that regularly provided the samples in the 6 months of the study, water from 144 collection sites was collected and a total of 864 samples were analyzed, of which 61.81 percent were classified as unacceptable. It was observed that 33 cities performed fluoridation but in 78.79 percent of these cities there were variations in the fluoride level among the sites and in the same site during the period of study. One can conclude that most of these cities do not control the fluoride levels in the public water, since fluoridation occurs in a discontinuous manner and in most of the situations not within the recommended concentrations.
Resumo:
The efficacy of the first ovulation of the breeding season was determined through the response of first pre-ovulatory follicle of the breeding season to hCG, embryo recovery rate, viability of recovered embryos, serum concentrations of progesterone, and response of first CL to PGF 2α. Thirteenth mares that were in vernal transition were accompanied until the first pre-ovulatory follicle was detected. At this moment, the ovulation was induced with 2,500 IU hCG (IV) and the mares were inseminated every other day until ovulation. Seven days after the ovulation, embryo recovery was performed and the progesterone concentration was determined. After detection of the first pre-ovulatory follicle of breeding season with ≥ 25mm, it took 14.92 ± 10.80 days for the follicle to reach the preovulatory size and 18.00 ± 11.08 days to ovulation. After administration of hCG, 11/13 mares ovulated in 48 hours. These follicles growth 2.19 ± 0.86 mm/day on average. Nine of 13 mares (69.2%) produced embryos and all were considered viable after morfological evaluation and fluorescence exams. The CL appeared competent producing 7.39 ± 2.11 ng/ml P 4 on average, and responding to PGF 2α. According to these results the first ovulatory cycle of the year can be utilized to produce viable embryos.
Resumo:
The aim of this present work was to compare planialtimetric charts obtained from different risings using two different theodolite types, a total station, and a precision level, used as control. Using a total station, an area was marked with clear variations of relief, following a grid, with a distance of 20 meters among stakes. After that, the stakes were read by the total station and two theodolites of different precisions. The geometric leveling was done by a precision level. The data were input in the DataGeosis software and the numerical modelling of the land was made with mesh of maximum rigidity, generating planialtimetric representation for each rising. It was verified, through comparison of the four representations that little variations occur in relation to the control. The closest representation of the control was the planialtimetry based on the data from the total station, in which the representations obtained from the theodolites were identical among themselves. It was concluded that in the process of obtaining detailed planialtimetry of small areas, submitted to the grid, it was not necessary to use composed geometric leveling, reducing work to the exclusive use of a total station or conventional theodolite.
Resumo:
This paper presents the results from lineal trend surface analysis technique application. The purpose was to detect positive and negative anomalies in the rain measure distribution obtained by the meteorological radar Doppler, band S, located in Bauru, during the period of 21 of October/2004 to 29 of April/2005 in the areas of Assis and Piracicaba. Using three Z-R radar relations for rain quantification was chosen the specific equation Z = 32R1,65, as the best one. The results showed that the applied methodology was able to indicate the space distribution of the rain accumulated, identifying and locating the regions where there was rainy excess and rainy lack during each analyzed period. Such results indicate areas with larger pluvial impact and consequently more favorable for environmental damages.
Resumo:
One specimen of the lophiid white anglerfish, Lophiodes beroe was collected for the second time in Brazilian waters, which far extends the limit distribution of the species to southeastern region (25°00'08).
Resumo:
Exploratory behavior is done by animals to increase their interaction to the environment after be stimulated by curiosity, when animal feels that is in a secured place. The objective of this study was to evaluate exploratory behavior of foals front of introduction of new objects in their environment. Four foals and mares were observed in seven day sections of 60 minutes each one, always with a new object. No differences were verified about frequencies of looking, going to or touching into foals and mares. Total time of touching was 45,6 minutes, divided in 64 touches, mainly in first 20 minutes of each observation. However there is no statistical difference into solitary or impaired approaches and in impaired approaches there is no differences into foals or mares initiatives, foals done more solitary approaches than mares. Four animals touched the objects in first place, suggesting predisposition to this position based in individual differences. So, we concluded that new objects can stimulate similarly foals and mares to exhibit exploratory behavior, but foals show more manipulation activity, suggesting that are more curious than mares and predisposition to touch objects first depends of individual differences.
Resumo:
Soil flushing is an alternative remediation technology for soils contaminated with heavy metals, which the main contaminant removing process consists in percolating an extraction solution. This work aimed to use the response surface methodology to point out combinations among the parameters of the extraction solution (Na2EDTA concentration, volume e pH) in order to reduce the concentration of copper in a sandy soil to risk levels lower than the intervention levels for exposure scenarios adopted by the Environmental Company of Sao Paulo State. Thus, a series of tests in leaching columns were carried out using a Fluvisol artificially contaminated (1257,3 mg kg-1). The tests were conducted in triplicate and setup a central composite rotatable design with 15 different parameters combinations of the extraction solution and one replicate in the center point. Using 5% significance level, the adjusted model (R2 = 0,98) indicated combinations of Na2EDTA concentration, pH and volume of the extraction solution which allow reduction of copper concentration below levels reported by environmental agency of Sao Paulo State for industrial, residential, agricultural or maximum exposure scenarios.
Resumo:
The Thermal Corridor of Uruguay River is located in the triple border of Argentine, Brazil and Uruguay, and shows an intense economic thermal tourism activity, mainly based on groundwaters from Guarani Aquifer System (GAS). Recent studies have pointed out the occurrence of high concentrations of arsenic (>10 μg/L) in GAS groundwater in this area. The complex geological and hydrogeological framework in the area is associated to the Paraná Basin geological evolution south of the Assuncion-Rio Grande Arch; it encompass paleozoic marine sequences and continental sequences permian/eotriassic to mesozoic in age, which are covered by basaltic lavas of Serra Geral Formation. Iron oxide coatings have been described in sandstones of Buena Vista and Sanga do Cabral formations, which underlie GAS units. Arsenic occurrence is associated to sodium bicarbonate groundwater with pH values over 8.0. Arsenic is released to groundwater by desorption from iron oxides/hydroxides, as result of the higher pH of these waters, indicating that arsenic is released from the units that underlie GAS units. Increase in chromium and uranium concentrations are also related to high pH groundwaters, thus indicating special care on using groundwater from this region.
Resumo:
Incluye Bibliografía
Resumo:
Objective: To evaluate the influence of different air abrasion protocols on the surface roughness of an yttria-stabilized polycrystalline tetragonal zirconia) (Y-TZP) ceramic, as well as the surface topography of the ceramic after the treatment. Method: Fifty-four specimens (7.5×4×7.5mm) obtained from two ceramic blocks (LAVA, 3M ESPE) were flattened with fine-grit sandpaper and subjected to sintering in the ceramic system's specific firing oven. Next, the specimens were embedded in acrylic resin and the surfaces to be treated were polished in a polishing machine using sandpapers of decreasing abrasion (600- to 1,200-grit) followed by felt discs with 10μm and 3μm polishing pastes and colloidal silica. The specimens were then randomly assigned to 9 groups, according to factors particle and pressure(n=6): Gr1- control; Gr2- Al 2O 3(50μm)/2.5 bar; Gr3- Al 2O 3(110μm)/2.5 bar; Gr4- SiO 2(30μm)/2.5 bar; Gr5- SiO 2(30μm)/2.5 bar; Gr6- Al 2O 3(50μm)/3.5 bar; Gr7- Al2O3(110μm)/3.5 bar; Gr8- SiO 2(30μm)/3.5 bar; Gr9- SiO 2(30μm)/3.5 bar. After treatments, surface roughness was analyzed by a digital optical profilometer and the morphology was examined by scanning electron microscopy (SEM). Data (μm) were subjected to statistical analysis by Dunnett's test (5%), two-way ANOVA and Tukey's test (5%). Results: The type of particle (p=0.0001) and the pressure (p=0.0001) used in the air abrasion protocols influenced the surface roughness values among the experimental groups (ANOVA). The mean surface roughness values (μm) obtained for the experimental groups (Gr2 to Gr9) were, respectively: 0.37 D; 0.56 BC; 0.46 BC; 0.48 CD; 0.59 BC; 0.82 A; 0.53B CD; 0.67 AB. The SEM analysis revealed that Al 2O 3, regardless of the particle size and pressure used, caused damage to the surface of the specimens, as it produced superficial damages on the ceramic, in the form of grooves and cracks. Conclusion: Al2O3 (110 μm/3.5 bar) air abrasion promoted the highest surface roughness on the ceramics, but it does not mean that this protocol promotes better ceramic-cement union compared to the other air abrasion protocols.
Resumo:
In Brazil, due to the breeding season for Thoroughbred, the reproductive data are normally truncate, since the breeders try to get animals that were born at the beginning of the breeding season in order to take their competitive advantages (more developed, mature and trained animals) compared to animals born later in the same breeding season. To analyze these data suitable methods should be used. Then, this paper aims to compare three methodologies: the method of maximum restricted likelihood, using MTDFREML, bayesian analysis without censured data by software MTGSAM and bayesian analysis with censured data by software LMCD, to evaluate age at first conception in thoroughbred mares, in order to verify its impact on the choice of stallions during selection. The database contained 3509 records for age at first conception (months) for thoroughbred mares. The heritability estimates were 0.23, 0.30 and 0.0926 (log scale), for MTDF, MTGSAM and LMCD, respectively. Considering all animals in the pedigree (6713), ranking correlations varied from 0.91 to 0.99. When only stallions were considered (656), those varied from 0.48 to 0.99 (considering different percentages of selected males) between evalua-tion methods. The highest changes in the general classification were observed when LMCD was compared to the other two methods. As the linear censured model is the most suitable for trait analysis with censured data, it was observed that censure information would lead to the choice of different animals during the selection process, when compared to the two other methodologies.
Resumo:
The objective of this paper was to review data on residues of medical products in aquatic environments and at wastewater treatment plants. Secondarily the paper presents a discussion about the need for a good management of drugs residues and effluents generated by this sector. Bringing the evidences of environmental possible damages reported by ecotoxicity data on the effects of fluoxetine to Vibrio fischeri and H. azteca, aquatic organisms daily exposed to environmental contaminants. From the results we observed that 0.3 mg.l-1 of fluoxetine hidrochloride induced lethality to H. azteca and 30 mg.l-1 reduced the luminescence of Vibrio fischeri. This assay evidenced higher toxicity when we used the generic product.
Resumo:
Coastal cities attract a large number of tourists for their beautiful landscape and recreational activities, increasing the municipalities' income source. Thus, a need is clear for the establishment of beach quality monitoring programs to ensure bathers health. Although there is an effective monitoring program for recreational waters in Brazil there are no programs to certify the quality of beach sands. In this sense, the aim of this work was to analyze the density of bacteria from the genus Enterococcus in both sand and water from two beaches from São Vicente, São Paulo (Brazil) and correlate these densities to abiotic parameters such as: temperature, salinity, particle size, organic matter and tides). Water and sand samples were collected during February 2006 on the beaches of Gonzaguinha e Ilha Porchat and bacterial densities were determined by membrane filter technique. Temperature and salinity were measured in situ with a thermometer and a refractometer while particle size and organic matter were determined according to methods described by Suguio and Dean. There were significant differences between densities found in water and sand (p=0.004), being approximately 20 times higher in Gonzaguinha's beach sands. Similar results were found for Ilha Porchat beach samples, being the densities found in sand 3 times greater than those found in water. Both beaches showed a negative correlation between bacterial densities and salinity and temperature, suggesting a deleterious effect of these parameters on the bacterial community. On the other hand, no correlation was found between organic matter and particle size and bacterial densities. This work demonstrates that there is a great necessity for monitoring beach sand since the evaluation of beach quality is an important part of integrated coastal management programs.
Resumo:
The Ribeira de Iguape River basin received intense mining activities for lead exploiting and, as a result, the river received the discharges of estimated amounts of 5.5 tons/month of material rich in As, Ba, Cd, Pb, Cu, Cr and Zn. In this article, the toxicity of waters and sediments collected in Ribeira de Iguape River was assessed aiming to estimate environmental quality. Three sampling campaigns were conducted, from 2009 to 2010. Toxicity tests with the cladoceran Daphnia similis were done for water samples and for sediments, in this case using sediment-water interface exposure. Results showed in general absence of toxicity for sediments and waters, and only eventually were acute effects registered (marginal toxicity). Results are consistent with the conditions indicated by the literature, of low concentrations of metals in waters and sediments; however they differ from the monitoring made by the state environmental agency, which registered chronic toxicity. The occurrence of eventual acute toxicity indicates that although Ribeira de Iguape River quality is being restored, conditions still are not totally under control.