The influence of off-screen landmarks on user orientation

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Design de Comunicação Para Sistemas Educativos não Formais

Relatório de Actividade Profissional apresentado para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Ciências da Comunicação – vertente de Novos Média e Práticas Web

A domain specific language for domotic systems

To cope with modernity, the interesting of having a fully automated house has been increasing over the years, as technology evolves and as our lives become more stressful and overloaded. An automation system provides a way to simplify some daily tasks, allowing us to have more spare time to perform activities where we are really needed. There are some systems in this domain that try to implement these characteristics, but this kind of technology is at its early stages of evolution being that it is still far away of empowering the user with the desired control over a habitation. The reason is that the mentioned systems miss some important features such as adaptability, extension and evolution. These systems, developed from a bottom-up approach, are often tailored for programmers and domain experts, discarding most of the times the end users that remain with unfinished interfaces or products that they have difficulty to control. Moreover, complex behaviors are avoided, since they are extremely difficult to implement mostly due to the necessity of handling priorities, conflicts and device calibration. Besides, these solutions are only reachable at very high costs, yet they still have the limitation of being difficult to configure by non-technical people once in runtime operation. As a result, it is necessary to create a tool that allows the execution of several automated actions, with an interface that is easy to use but at the same time supports all the main features of this domain. It is also desirable that this tool is independent of the hardware so it can be reused, thus a Model Driven Development approach (MDD) is the ideal option, as it is a method that follows those principles. Since the automation domain has some very specific concepts, the use of models should be combined with a Domain Specific Language (DSL). With these two methods, it is possible to create a solution that is adapted to the end users, but also to domain experts and programmers due to the several levels of abstraction that can be added to diminish the complexity of use. The aim of this thesis is to design a Domain Specific Language (DSL) that uses the Model Driven Development approach (MDD), with the purpose of supporting Home Automation (HA) concepts. In this implementation, the development of simple and complex scenarios should be supported and will be one of the most important concerns. This DSL should also support other significant features in this domain, such as the ability to schedule tasks, which is something that is limited in the current existing solutions.

A piezoelectric based energy harvester interface for a CMOS wireless sensor IC

In this thesis a piezoelectric energy harvesting system, responsible for regulating the power output of a piezoelectric transducer subjected to ambient vibration, is designed to power an RF receiver with a 6 mW power consump-tion. The electrical characterisation of the chosen piezoelectric transducer is the starting point of the design, which subsequently presents a full-bridge cross-coupled rectifier that rectifies the AC output of the transducer and a low-dropout regulator responsible for delivering a constant voltage system output of 0.6 V, with low voltage ripple, which represents the receiver’s required sup-ply voltage. The circuit is designed using CMOS 130 nm UMC technology, and the system presents an inductorless architecture, with reduced area and cost. The electrical simulations run for the complete circuit lead to the conclusion that the proposed piezoelectric energy harvesting system is a plausible solution to power the RF receiver, provided that the chosen transducer is subjected to moderate levels of vibration.

Contribution of Mental Health Service User Groups to Mental Health Services and Policy in Ghana : The Case of Mental Health Society of Ghana

RESUMO: Este estudo procurou documentar a perspectiva (s) dos utentes de saúde mental e das associações de prestadores de cuidados sobre a prestação, o papel e a contribuição de serviços de saúde mental da comunidade tal como foram percebidos por um número de informadores-chave, incluindo os utentes do serviço mentais e os próprios prestadores de cuidados. O caso específico da Sociedade Saúde Mental do Gana (MEHSOG) foi o foco deste estudo. O modelo foi o de um estudo de caso, utilizando discussões de grupo e entrevistas com informadores-chave como instrumentos de recolha de dados. Estas ferramentas de colheita de dados foram complementadas por observações dos participantes e pela revisão de documentos da MEHSOG e dos vários grupos de apoio da comunidade de auto-ajuda que compõem a associação nacional. O estudo revelou que os utentes dos serviços de saúde mental e seus prestadores de cuidados constituem um importante grupo de partes interessadas na prestação de serviços de saúde mental da comunidade e no desenvolvimento de políticas que tenham em conta as necessidades e os direitos das pessoas com doença mental ou epilepsia. O envolvimento da MEHSOG promove a mobilização de membros e famílias relacionadas com a doença mental de beneficiar de serviços de tratamento bem organizados com um impacto significativo na melhoria da saúde e da participação dos utentes dos serviços e seus prestadores de cuidados primários em processos de tomada de decisão da família e na comunidade processos de desenvolvimento. Os utentes dos serviços por beneficiarem de tratamento, e os prestadores de cuidados primários, por se tornarem mais livres e menos sobrecarregados com a responsabilidade de cuidar, podem passar a envolver-se mais em atividades que melhoramo seu estado, o de suas famílias e das comunidades. A advocacia dos membros da MEHSOG para conseguir que a “Mental Health Bill” se transforme numa Lei foi também um desenvolvimento significativo resultante da participação ativa dos utentes do serviço em chamar a atenção para uma nova e inclusiva legislação de saúde mental para o Gana. Entre os fatores e oportunidades que permitiram aos utentes dos serviços de saúde mental e aos prestadores de cuidados primários de pessoas com doença mental apoiar activamente a prestação de serviços de saúde mental comunitária e o desenvolvimento de políticas conta-se a contribuição da sociedade civil do Gana, particularmente o movimento da deficiência, e os esforços anteriores de ONGs em saúde mental e dos profissionais de saúde mental para ter uma nova lei em saúde mental. Observámos um certo número de desafios e barreiras que actuam de forma a limitar a influência dos utentes dos serviços de saúde mental na provisão da saúde mental comunitária e no desenvolvimento de políticas. Entre elas o estigma social contra a doença mental e pessoas com doença mental ou epilepsia e seus cuidadores primaries é um factor chave. O estigma tem alterado a percepção e as análises do público em geral, especialmente dos profissionais de saúde e das autoridades políticas afetando a priorização dos problemas de saúde mental nas políticas e programas. Outro desafio foi a deficiente infra-estrutura disponível para apoiar serviços de saúde mentais que assegurem aos utentes permanecerem em bom estado de saúde e bem-estar para serem advogados de si próprios. A recomendação do presente estudo é que os movimentos de utentes dos serviços de saúde mental são importantes e que eles precisam de ser apoiados e encorajados a desempenhar o seu papel como pessoas com experiência vivida para contribuir para a organização e prestação de serviços de saúde mental, bem como para a implementação, monitorização e avaliação de políticas e programas. ------------------------------------ ABSTRACT: This study sought to document the perspective(s) of mental health users and care-givers associations in community mental health service provision and their role and contribution as it was perceived by a number of key informants including the mental service users and care-givers themselves. The specific case of the Mental Health Society of Ghana (MEHSOG) was the focus of this study. A case study approach was used to with Focus Group Discussions and Key Informants Interviews being the data collection tools that were used. These data collection tools were complemented by participant observations and review of documents of the MEHSOG and the various community self-help peer support groups that make up the national association. The study revealed that mental health service users and their care-givers constitute an important stakeholder group in community mental health service provision and development of policies that factor in the needs and rights of persons with mental illness or epilepsy. MEHSOG’s involvement in mobilising members and education families to come forward with the relations with mental illness to benefit from treatment services were well made a significant impact in improving the health and participation of service users and their primary carers in family decision-making processes and in community development processes. Service users, on benefiting from treatment, and primary care-givers, on becoming freer and less burdened with the responsibility of care, move on to engage in secure livelihoods activities, which enhanced their status in their families and communities. The advocacy MEHSOG members undertook in getting the mental health Bill become Law was also noted as significant development that was realised as a result of active involvement of service users in calling for a new and inclusive mental health legislation for Ghana. Enabling factors and opportunities that enabled mental health service users and primary care-givers of people with mental illness to actively support community mental health service provision and policy development is with the vibrant civil society presence in Ghana, particularly the disability movement, and earlier efforts by NGOs in mental health in Ghana long-side mental health professionals to have a new law in mental health. A number of challenges were also noted which were found to limit the extent to which mental health service users can be influential in community mental health service provision and policy development. Key among them was the social stigma against mental illness and people with mental illness or epilepsy and their primary carers. Stigma has affected perceptions, analyses of the general public, especially health practitioners and policy authorities that it has affected their prioritisation of mental health issues in policies and programmes. Another challenge was the poor infrastructure available to support enhanced mental health care services that ensure mental health service users remain in a good state of health and wellbeing to advocate for themselves. The recommendation from the study is that mental health service user movements are important and need to be supported and encouraged to play their role as persons with lived experience to inform organisation and provision of mental health services as well as design and implementation, monitoring and evaluation of policies and programes.

Interaction paradigms versus age-related user profiles: an evaluation on content selection

Novel input modalities such as touch, tangibles or gestures try to exploit human's innate skills rather than imposing new learning processes. However, despite the recent boom of different natural interaction paradigms, it hasn't been systematically evaluated how these interfaces influence a user's performance or whether each interface could be more or less appropriate when it comes to: 1) different age groups; and 2) different basic operations, as data selection, insertion or manipulation. This work presents the first step of an exploratory evaluation about whether or not the users' performance is indeed influenced by the different interfaces. The key point is to understand how different interaction paradigms affect specific target-audiences (children, adults and older adults) when dealing with a selection task. 60 participants took part in this study to assess how different interfaces may influence the interaction of specific groups of users with regard to their age. Four input modalities were used to perform a selection task and the methodology was based on usability testing (speed, accuracy and user preference). The study suggests a statistically significant difference between mean selection times for each group of users, and also raises new issues regarding the “old” mouse input versus the “new” input modalities.

The impact of work clothing design on workers’ comfort

Physical and physiological comfort, at work and during leisure time, is important to human health and motivation. A growing number of jobs require workers to sit. Most clothes, except those intended for wheelchair users, were designed for walking or the standing position. Clothing designs should be user-oriented and meet users’ needs. Garment design should conform to body position and posture, not just shape and size. In this paper we present the ergometric impact of a new type of trousers designed to adapt to changes in position. Concentrations of compression forces, temperature and pressure were documented in an exploratory pilot study and contrasted to traditional designs. The new trousers showed significant decreases in compression force concentration, especially in and around the knees and waist. Most participants identified comfort as an important factor when purchasing a pair of trousers and that, for working purposes, they would prefer these special trousers rather than traditional designs.

Strategic planning of electricity systems: Integrating renewable energies

Tese de Doutoramento - Programa Doutoral em Engenharia Industrial e Sistemas (PDEIS)

High strain rate constitutive modeling forhistorical structures subjected to blast loading

Doctoral Thesis Civil Engineering

Design and validation of a biomechanical bioreactor for cartilage tissue culture

Specific tissues, such as cartilage undergo mechanical solicitation under their normal performance in human body. In this sense, it seems necessary that proper tissue engineering strategies of these tissues should incorporate mechanical solicitations during cell culture, in order to properly evaluate the influence of the mechanical stimulus. This work reports on a user-friendly bioreactor suitable for applying controlled mechanical stimulation - amplitude and frequency - to three dimensional scaffolds. Its design and main components are described, as well as its operation characteristics. The modular design allows easy cleaning and operating under laminar hood. Different protocols for the sterilization of the hermetic enclosure are tested and ensure lack of observable contaminations, complying with the requirements to be used for cell culture. The cell viability study was performed with KUM5 cells.

User expectations for media sharing practices in open display networks

Open Display Networks have the potential to allow many content creators to publish their media to an open-ended set of screen displays. However, this raises the issue of how to match that content to the right displays. In this study, we aim to understand how the perceived utility of particular media sharing scenarios is affected by three independent variables, more specifically: (a) the locativeness of the content being shared; (b) how personal that content is and (c) the scope in which it is being shared. To assess these effects, we composed a set of 24 media sharing scenarios embedded with different treatments of our three independent variables. We then asked 100 participants to express their perception of the relevance of those scenarios. The results suggest a clear preference for scenarios where content is both local and directly related to the person that is publishing it. This is in stark contrast to the types of content that are commonly found in public displays, and confirms the opportunity that open displays networks may represent a new media for self-expression. This novel understanding may inform the design of new publication paradigms that will enable people to share media across the display networks.

Dynamic interface model for masonry walls subjected to high strain rate out-of-plane loads

The present study proposes a dynamic constitutive material interface model that includes non-associated flow rule and high strain rate effects, implemented in the finite element code ABAQUS as a user subroutine. First, the model capability is validated with numerical simulations of unreinforced block work masonry walls subjected to low velocity impact. The results obtained are compared with field test data and good agreement is found. Subsequently, a comprehensive parametric analysis is accomplished with different joint tensile strengths and cohesion, and wall thickness to evaluate the effect of the parameter variations on the impact response of masonry walls.

Desenvolvimento de um Posto de Carregamento Lento com BMS e Interface com o Cockpit para o CEPIUM

Dissertação de mestrado integrado em Engenharia Eletrónica Industrial e de Computadores

SOFHIA: a CAD environment to design digital control systems

"Series Title: IFIP - The International Federation for Information Processing, ISSN 1868-4238"

Optimising the design and manufacture of a customised, prescription fit, Maxillo-facial prosthesis

This thesis is a continuation of the Enterprise-Ireland Research Innovation Fund (RIF) Project entitled’ "Design and Manufacturing of Customised Maxillo-Facial Prostheses" The primary objective of this Internal Research Development Program (IRDP) project was to investigate two fundamental design changes 1 To incorporate the over-denture abutments directly into the implant. 2 To remove the restraining wings by the addition of screws, which affix the. implant to the dense material of the jawbone. The prosthetic was redesigned using the ANSYS Finite Element Analysis software program and analysed to* • Reduce the internal von Mises stress distribution The new prosthetic had a -63.63 % lower von Mises stress distribution when compared with the original prosthetic. • Examine the screw preload effects. A maximum relative displacement of 22 6 * lO^mm between the bone and screw was determined, which is well below the critical threshold of micromotion which prevents osseointegration • Investigate the prosthetic-bone contact interface. Three models of the screw, prosthesis, and bone, were studied. (Axisymmetnc, quarter volume, and full volume), a recommended preload torque of 0 32 Nm was applied to the prosthetic and a maximum von Mises stress of 1.988 MPa was predicted • Study the overdenture removal forces. This analysis could not be completed because the correct plastic multilinear properties of the denture material could not be established The redesigned prosthetic was successfully manufactured on a 3-axis milling machine with an indexing system The prosthetic was examined for dimensional quality and strength The research established the feasibility of the new design and associated manufacturing method.