Genetic polymorphism of Streptococcus mutans in Brazilian family members

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Resistência de união entre dentes artificiais e resinas acrílicas para base protética

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

CORRELATING THE CURVE DISTANCE BETWEEN THE DISTAL of THE CANINES TO THE COMBINED WIDTH of THE SIX ANTERIOR TEETH WHEN SELECTING DENTURE TEETH FOR DIFFERENT ETHNIC GROUPS

Statement of problem. To select the width of denture teeth, the distance between the marks indicating the location of the canines is usually measured around the curvature of the wax occlusal rim; however, most manufacturers' mold charts provide the measurements of the artificial 6 anterior teeth as if they were on a straight line.Purpose. The purpose of this study was to investigate whether the curve distance between the distal surfaces of the maxillary canines can be related to the combined width (straight measurement) of the 6 anterior teeth in 4 ethnic groups.Material and methods. Maxillary stone casts were obtained for 160 dentate subjects of 4 ethnic groups (40 whites, 40 blacks, 40 multiracial - descendants of white and black parents, and 40 Asians). The width of each maxillary anterior tooth was measured on the casts with sliding calipers. The combined width of the 6 anterior teeth (CW) corresponded to the sum of the width of each anterior tooth. The curve distance between the distal surfaces of the canines (CD) was measured by using dental tape and sliding calipers. The Pearson correlation coefficient and regression analysis were used to evaluate the relationship between CD and CW in each ethnic group (alpha=.05).Results. The mean CD and CW values (in mm) obtained were: whites (CD=52.12; CW=45.65); blacks (CD=56.10; CW=48.13); multiracial (CD=53.58; CW=46.54); and Asians (CD=53.29; CW=46.60). Significant (P<.001) correlations between CD and CW measurements were observed for all ethnic groups studied (whites, r=0.957; blacks, r=0.803; multiracial, r=0.917; and Asians, r=0.881). The following linear regression equations were obtained: whites [CD=1.1(CW)+0.3]; blacks [CD=0.95(CW)+9.3]; multiracial [CD=1.2(CW)-1.1]; and Asians [CD=1.0(CW)+5].Conclusions. The curve distance between the distal surfaces of the maxillary canines can be accurately related to the combined width of the 6 anterior teeth in the selection of denture teeth for the studied ethnic groups. (J Prosthet Dent 2012;107:400-404)

Single crowns versus conventional fillings for the restoration of root filled teeth

BackgroundEndodontic treatment, involves removal of the dental pulp and its replacement by a root canal filling. Restoration of root filled teeth can be challenging due to structural differences between vital and non-vital root filled teeth. Direct restoration involves placement of a restorative material e.g. amalgam or composite directly into the tooth. Indirect restorations consist of cast metal or ceramic (porcelain) crowns. The choice of restoration depends on the amount of remaining tooth which may influence long term survival and cost. The comparative in service clinical performance of crowns or conventional fillings used to restore root filled teeth is unclear.ObjectivesTo assess the effects of restoration of endodontically treated teeth (with or without post and core) by crowns versus conventional filling materials.Search methodsWe searched the following databases: the Cochrane Oral Health Group's Trials Register, CENTRAL, MEDLINE via OVID, EMBASE via OVID, CINAHL via EBSCO, LILACS via BIREME and the reference lists of articles as well as ongoing trials registries. There were no restrictions regarding language or date of publication. Date of last search was 13 February 2012.Selection criteriaRandomised controlled trials (RCTs) or quasi-randomised controlled trials in participants with permanent teeth which have undergone endodontic treatment. Single full coverage crowns compared with any type of filling materials for direct restoration, as well as indirect partial restorations (e.g. inlays and onlays). Comparisons considered the type of post and core used (cast or prefabricated post), if any.Data collection and analysisTwo review authors independently assessed trial quality and extracted data.Main resultsOne trial judged to be at high risk of bias due to missing outcome data, was included. 117 participants with a root filled premolar tooth restored with a carbon fibre post, were randomised to either a full coverage metal-ceramic crown or direct adhesive composite restoration. At 3 years there was no reported difference between the non-catastrophic failure rates in both groups. Decementation of the post and marginal gap formation occurred in a small number of teeth.Authors' conclusionsThere is insufficient evidence to support or refute the effectiveness of conventional fillings over crowns for the restoration of root filled teeth. Until more evidence becomes available clinicians should continue to base decisions on how to restore root filled teeth on their own clinical experience, whilst taking into consideration the individual circumstances and preferences of their patients.

Effect of Conventional and Resin-modified Glass-Ionomer Liner on Dentin Adhesive Interface of Class I Cavity Walls After Thermocycling

Objective: The aim of this in vitro study was to analyze the effect of glass-ionomer cement as a liner on the dentin/resin adhesive interface of lateral walls of occlusal restorations after thermocycling.Materials and Methods: Occlusal cavities were prepared in 60 human molars, divided into six groups: no liner (1 and 4); glass-ionomer cement (GIC, Ketac Molar Easymix, 3M ESPE) (2 and 5); and resin-modified glass-ionomer cement (RMGIC, Vitrebond, 3M ESPE) (3 and 6). Resin composite (Filtek Z250, 3M ESPE) was placed after application of an adhesive system (Adper Single Bond 2, 3M ESPE) that was mixed with a fluorescent reagent (Rhodamine B) to allow confocal microscopy analysis. Specimens of groups 4, 5 and 6 were thermocycled (5 degrees C-55 degrees C) with a dwell time of 30 seconds for 5000 cycles. After this period, teeth were sectioned in approximately 0.8-mm slices. One slice of each tooth was randomly selected for confocal microscopy analysis. The other slices were sectioned into 0.8 nun x 0.8 mm beams, which were submitted to microtensile testing (MPa). Data were analyzed using two-way ANOVA and Tukey test (p < 0.05).Results: There was no detectedstatistical difference on bond strength among groups (alpha < 0.05). Confocal microscopy analysis showed a higher mean gap size in group 4(12.5 mu m) and a higher percentage of marginal gaps in the thermocycled groups. The RNIGIC liner groups showed the lowest percentage of marginal gaps.Conclusions: Lining with RMGIC resulted in less gap formation at the dentin/resin adhesive interface after artificial aging. RMGIC or GIC liners did not alter the microtensile bond strength of adhesive system/resin composite to dentin on the lateral walls of Class I restorations.

Fracture strength of flared bovine roots restored with different intraradicular posts

Objective: The aim of this study was to evaluate the fracture strength and failure mode of flared bovine roots restored with different intraradicular posts. Material and Methods: Fifty bovine incisors with similar dimensions were selected and their roots were flared until 1.0 mm of dentin wall remained. Next, the roots were allocated into five groups (n=10): GI-cast metal post-and-core; GII-fiber posts plus accessory fiber posts; GIII-direct anatomic post; GIV-indirect anatomic post and GV-control (specimens without intraradicular post). A polyether impression material was used to simulate the periodontal ligament. After periodontal ligament simulation, the specimens were subjected to a compressive load at a crosshead speed of 0.5 mm/min in a servo-hydraulic testing machine (MTS 810) applied at 135 to the long axis of the tooth until failure. The data (N) were subjected to ANOVA and Tukey's post-hoc test (alpha=0.05). Results: GI and GIV presented higher fracture strength (p<0.05) than GII. GIII presented intermediate values without statistically significant differences (p>0.05) from GI, GII and GIV. Control specimens (GV) produced the lowest fracture strength mean values (p<0.05). Despite obtaining the highest mean value, GI presented 100% of unfavorable failures. GII presented 20% of unfavorable failures. GIII, GIV and GV presented only favorable failures. Conclusions: Although further in vitro and in vivo studies are necessary, the results of this study showed that the use of direct and indirect anatomic posts in flared roots could be an alternative to cast metal post-and-core.

Effect of oral hygiene education and motivation on removable partial denture wearers: longitudinal study

The purpose of this study was to determine the effect of two different preventive oral hygiene education and motivation programmes on the plaque and gingival index, as well as denture hygiene of patients provided with removable partial denture (RPD) during a 12-month follow-up.A total of 53 partially edentulous patients were recruited for this study. The presence or absence of plaque and gingival bleeding by gentle probing was scored on all tooth surfaces at the preliminary visit. The plaque and gingival indexes were measured using the Loe index. Following treatment, the patients were randomly divided into three groups. In Control Group I, subjects were instructed to continue their personal oral hygiene routine. In Group II, participants were given verbal instructions and a self-educational manual on oral hygiene without illustrations. In Group III, oral hygiene guidance was delivered using a combination of verbal instructions and a self-teaching manual. To evaluate the effect of the different modes of instruction, the presence or absence of plaque and gingival bleeding was scored on all tooth surfaces (day zero examination) and re-examined 7, 15 and 30 days, 3, 6 and 12 months following RPD placement. The state of denture hygiene was evaluated 7, 15 and 30 days and 3, 6 and 12 months following rehabilitation. Parametric statistics was applied to dental plaque and gingival indexes. For accumulation of plaque and calculus on the RPD, non-parametric statistic was applied.The frequency of plaque found during the preliminary visit was higher than that found in the other periods. With regard to gingival index, significant difference was found between the preliminary visit examination and other periods. There was a significant difference in the plaque accumulation on the denture surface between groups I and III.The different methods of oral hygiene instruction used in this study indicate that the type of education was not of significant importance.

Disinfection of Bovine Enamel by Microwave Irradiation: Effect on the Surface Microhardness and Demineralization/Remineralization Processes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Association between PAX-9 promoter polymorphisms and hypodontia in humans

Hypodontia, the congenital absence of one or a few teeth, is one of the most common alterations of the human dentition. The most common permanent missing teeth are the third molars, second premolars, and maxitlary lateral incisors. Hypodontia does not represent a serious public health problem, but it may cause masticatory and speech dysfunctions, and esthetic problems. PAX9 is believed to play an important rote in tooth development. It is expressed at initiation, bud, cap, and bell stages of odontogenesis. Mutations in PAX9 coding sequences have been implicated in autosomal dominant oligodontia affecting predominantly permanent molars and second premolars. Here, we report two polymorphisms in the promoter region of PAX9 gene that are associated with hypodontia. DNA was extracted from buccal epithelial. cells of 106 healthy Control individuals and of 102 unrelated individuals with hypodontia. PCR-RFLP was employed in the investigation of G-1031A and T-912C polymorphisms. Significant differences were obtained comparing Control and Test groups. Alleles G and T were found at a significant higher frequency in individuals with hypodontia, whereas alleles A and C were more frequent in Control subjects, p = 0.0094 and 0.0086, respectively. The GT haplotype was significantly more prevalent in the hypodontia group, white the AC haplotype was more frequent in the Control group. These results indicate that polymorphisms in the promoter region of PAX9 gene may have an influence on the transcriptional activity of this gene and are associated with hypodontia in humans. (c) 2005 Elsevier Ltd. AR rights reserved.

Decrease in the number and apoptosis of alveolar bone osteoclasts in estrogen-treated rats

Bone is a mineralized tissue that is under the influence of several systemic, local and environmental factors. Among systemic factors, estrogen is a hormone well known for its inhibitory function on bone resorption. As alveolar bone of young rats undergoes continuous and intense remodeling to accommodate the growing and erupting tooth, it is a suitable in vivo model for using to study the possible action of estrogen on bone. Thus, in an attempt to investigate the possibility that estrogen may induce the death of osteoclasts, we examined the alveolar bone of estrogen-treated rats.Fifteen, 22-d-old female rats were divided into estrogen, sham and control groups. The estrogen group received estrogen and the sham group received corn oil used as the dilution vehicle. After 8 d, fragments containing alveolar bone were removed and processed for light microscopy and transmission electron microscopy. Sections were stained with hematoxylin and eosin and tartrate-resistant acid phosphatase (TRAP)-an osteoclast marker. Quantitative analysis of the number of TRAP-positive osteoclasts per mm of bone surface was carried out. For detecting apoptosis, sections were analyzed by the Terminal deoxynucleotidyl transferase-mediated dUTP Nick-End Labeling (TUNEL) method; TUNEL/TRAP combined methods were also used.The number of TRAP-positive osteoclasts per mm of bone surface was significantly reduced in the estrogen group compared with the sham and control groups. TRAP-positive osteoclasts exhibiting TUNEL-positive nuclei were observed only in the estrogen group. In addition, in the estrogen group the ultrastructural images revealed shrunken osteoclasts exhibiting nuclei with conspicuous and tortuous masses of condensed chromatin, typical of apoptosis.Our results reinforce the idea that estrogen inhibits bone resorption by promoting a reduction in the number of osteoclasts, thus indicating that this reduction may be, at least in part, a consequence of osteoclast apoptosis.

Processo de reparo em feridas de extração dentária em camundongos tratados com o complexo Symphytum officinale e Calendula officinallis

Medicamentos homeopáticos como o Symphytum officinalle e a Calendula officinallis são dotados de propriedades anti-sépticas, antiinflamatória, cicatrizantes e também agem como promotores da consolidação de fraturas ósseas. Neste trabalho, uniram-se esses dois medicamentos similares em um complexo para verificar o seu efeito no reparo em feridas de extração dentária em camundongos. O complexo Symphytum officinalle e Calendula officinallis nas potências de 6CH e 3CH, respectivamente, foi ministrado por via oral ao grupo tratado durante 5 dias antes e após a extração do incisivo superior direito. No grupo controle, administraram-se 5ml de álcool etílico a 70% diluídos em 30 ml de soro fisiológico. Após a proservação, os animais foram sacrificados, a maxila direita separada da esquerda, fixada e processada para inclusão em parafina. Após a microtomia, os cortes obtidos foram corados pela H/E. A análise histológica mostrou que, tanto no grupo controle como no tratado, o alvéolo dentário estava preenchido por tecido de granulação e tecido ósseo neoformado, com graus variáveis de maturação, rico em osteócitos. No entanto, nos animais tratados, o processo de reparo em feridas após extração dentária do incisivo superior direito mostrou um avanço progressivo de neoformação óssea mais acentuado quando comparado ao grupo controle, em tempos equivalentes. Estes resultados enfatizam as propriedades biológicas do complexo Symphytum officinalle e Calendula officinallis e sua possível utilização como recurso terapêutico na Odontologia.

Presence and morphology of the molar tubercle according to dentition, hemi-arch and sex

The purpose of this study was to assess the presence and the degree of expression of the molar tubercle according to sex, dentition and hemi-arches. Study casts of 126 patients were assessed, and those were under orthodontic treatment at the University of Franca, UNIFRAN; they were from both sexs, from 4 to 13 years old. The upper second primary molars and the upper first permanent molars, from both sides, were evaluated regarding the presence and the degree of expression of the molar tubercle. For an association study, the qui-square test was utilized. The concordance about the presence or absence of the molar tubercle according to dentition, hemi-arch and sex, was estimated by the Kappa Statistics. There was a sexual dimorphism concerning the presence/absence of the molar tubercle (p=0.009), however there was no significant association between the degree of expression of the tubercle and the sex (p=0.791). The molar tubercle was more frequently observed in the male sex, in upper second primary molars and in the form of depression. There was a significant and "moderate" concordance between the left and right sides in primary dentition (k=0.596), there was a "good" concordance in permanent dentition (k=0.708) and a "weak" and significant concordance between the presence of the molar tubercle and dentition (k=0.207).

Mast cells and MMP-9 in the lamina propria during eruption of rat molars: quantitative and immunohistochemical evaluation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Assessing the surface roughness of a posterior resin composite: effect of surface sealing

This study assessed the in vitro influence of surface sealing on the surface roughness of a posterior resin composite before and after tooth-brushing. Thirty. specimens (13 nun diameter x 1 mm high) were fabricated from Filtek-P60 resin composite and randomly assigned to three groups (n=10): a non-sealed control and two groups sealed with one of the tested materials-a surface-penetrating sealant (Protect-it!-PI) and a one bottle adhesive system (Single Bond-SB). The samples were subjected to a surface roughness reading to determine the initial roughness, then submitted to simulated toothbrushing with 35,600 cycles for 100 minutes. Specimens were then cleaned and a post-abrasion surface roughness reading accomplished. Means (pm), recorded before (B) and after (A) toothbrushing, and standard deviations were: Control-(B): 0.032 (+/-0.005), (A): 0.054 (+/-0.005); PI-(B): 0.034 (+/-0.005), (A): 0.060 (+/-0.034); SB (B): 0.031 (+/-0.004), (A): 0.047 (+/-0.007). Data were tabulated and submitted to two-way ANOVA. No statistically significant difference was observed when the control and experimental groups were compared. However, a significant difference (p<0.05) was found between the measurements performed before and after toothbrushing. Based on these results, it may be concluded that using either a surface penetrating sealant or a one bottle adhesive system did not provide the optimization of superficial integrity. The use of a dentifrice and toothbrush resulted in significant alterations to the surface smoothness of the resin composite.

CIE L*a*b*: comparison of digital images obtained photographically by manual and automatic modes

The aim of this study was to analyze the color alterations performed by the CIE L*a*b* system in the digital imaging of shade guide tabs, which were obtained photographically according to the automatic and manual modes. This study also sought to examine the observers' agreement in quantifying the coordinates. Four Vita Lumin Vaccum shade guide tabs were used: A3.5, B1, B3 and C4. An EOS Canon digital camera was used to record the digital images of the shade tabs, and the images were processed using Adobe Photoshop software. A total of 80 observations (five replicates of each shade according to two observers in two modes, specifically, automatic and manual) were obtained, leading to color values of L*, a* and b*. The color difference (AE) between the modes was calculated and classified as either clinically acceptable or unacceptable. The results indicated that there was agreement between the two observers in obtaining the L*, a* and b* values related to all guides. However, the B1, B3, and C4 shade tabs had AE values classified as clinically acceptable (Delta E = 0.44, Delta E = 2.04 and Delta E = 2.69, respectively). The A3.5 shade tab had a AE value classified as clinically unacceptable (Delta E = 4.17), as it presented higher values for luminosity in the automatic mode (L* = 54.0) than in the manual mode (L* = 50.6). It was concluded that the B1, B3 and C4 shade tabs can be used at any of the modes in digital camera (manual or automatic), which was a different finding from that observed for the A3.5 shade tab.