Effect of the catalyst composition in the Pt-x(Ru-Ir)(1-x)/C system on the electro-oxidation of methanol in acid media

The effect of variations in the composition for ternary catalysts of the type Pt-x(Ru-Ir)(1-x)/C on the methanol oxidation reaction in acid media for x values of 0.25, 0.50 and 0.75 is reported. The catalysts were prepared by the sol-gel method and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), atomic absorption spectroscopy (AAS) and energy dispersive X-ray (EDX) analyses. The nanometric character (2.8-3.2 nm) of the sol-gel deposits was demonstrated by XRD and TEM while EDX and AAS analyses showed that the metallic ratio in the compounds was very near to the expected one. Cyclic voltammograms for methanol oxidation revealed that the reaction onset occur at less positive potentials in all the ternary catalysts tested here when compared to a Pt-0.75-Ru-0.25/C (E-Tek) commercial composite. Steady-state polarization experiments (Tafel plots) showed that the Pt-0.25(Ru-Ir)(0.75)/C catalyst is the more active one for methanol oxidation as revealed by the shift of the reaction onset towards lower potentials. In addition, constant potential electrolyses suggest that the addition of Ru and Ir to Pt decreases the poisoning effect of the strongly adsorbed species generated during methanol oxidation. Consequently, the Pt-0.25 (Ru-Ir)(0.75)/C Composite catalyst is a very promising one for practical applications. (c) 2007 Elsevier B.V. All rights reserved.

Simulation of Photovoltaic Panel Production as Complement to Ground Source Heat Pump System

This master thesis presents a new technological combination of two environmentally friendly sources of energy in order to provide DHW, and space heating. Solar energy is used for space heating, and DHW production using PV modules which supply direct current directly to electrical heating elements inside a water storage tank. On the other hand a GSHP system as another source of renewable energy provides heat in the water storage tank of the system in order to provide DHW and space heating. These two sources of renewable energy have been combined in this case-study in order to obtain a more efficient system, which will reduce the amount of electricity consumed by the GSHP system.The key aim of this study is to make simulations, and calculations of the amount ofelectrical energy that can be expected to be produced by a certain amount of PV modules that are already assembled on a house in Vantaa, southern Finland. This energy is then intended to be used as a complement to produce hot water in the heating system of the house beside the original GSHP system. Thus the amount of electrical energy purchased from the grid should be reduced and the compressor in the GSHP would need fewer starts which would reduce the heating cost of the GSHP system for space heating and providing hot water.The produced energy by the PV arrays in three different circuits will be charged directly to three electrical heating elements in the water storage tank of the existing system to satisfy the demand of the heating elements. The excess energy can be used to heat the water in the water storage tank to some extent which leads to a reduction of electricity consumption by the different components of the GSHP system.To increase the efficiency of the existing hybrid system, optimization of different PV configurations have been accomplished, and the results are compared. Optimization of the arrays in southern and western walls shows a DC power increase of 298 kWh/year compared with the existing PV configurations. Comparing the results from the optimization of the arrays on the western roof if the intention is to feed AC power to the components of the GSHP system shows a yearly AC power production of 1,646 kWh.This is with the consideration of no overproduction by the PV modules during the summer months. This means the optimized PV systems will be able to cover a larger part of summer demand compared with the existing system.

A Model of Normative Power

A power describes the ability of an agent to act in some way. While this notion of power is critical in the context of organisational dynamics, and has been studied by others in this light, it must be constrained so as to be useful in any practical application. In particular, we are concerned with how power may be used by agents to govern the imposition and management of norms, and how agents may dynamically assign norms to other agents within a multi-agent system. We approach the problem by defining a syntax and semantics for powers governing the creation, deletion, or modification of norms within a system, which we refer to as normative powers. We then extend this basic model to accommodate more general powers that can modify other powers within the system, and describe how agents playing certain roles are able to apply powers, changing the system’s norms, and also the powers themselves. We examine how the powers found within a system may change as the status of norms change, and show how standard norm modification operations — such as the derogation, annulment and modification of norms— may be represented within our system.

Motivation of german entrepreneurs to seek equity via crowdfunding: an exploratory study

Equity crowdfunding, ou financiamento de um projeto ou empreendimento através de diversos pequenos investimentos ou um grande grupo de investidores, tem recebido uma crescente atenção da mídia e acadêmicos. A discussão questiona se crowdfunding pode de uma forma geral transformar a maneira como as pessoas captam capital para os seus negócios. Enquanto que pesquisas tem até então focado em explorar porque crowdinvestors têm motivação em financiar empreitadas, este estudo foca em revelar o que motiva empreendedores a procurar soluções de crowdfund. Para isso, o estudo investigou a motivação de 11 empreendedores que usaram plataformas alemãs de crowdfunding. Como estudos existentes sobre a motivação de empreendedores são na sua grande maioria superficiais, este estudo utiliza uma nova abordagem de pesquisa na área de financiamento de projetos, a abordagem de means-end. Sob essa abordagem a forma de pensar dos empreendedores em relação ao uso de equity crowdfunding foi estudada de forma holística, revelando todo o processo de raciocínio até a decisão final de optar por uma estratégia de crowdfunding. Uma das descobertas é que empreendedores usam equity crowdfunding para arrecadar fundos de crowdinvestors consideravelmente não-racionais (emocionais) para financiar o crescimento futuro de seus negócios e também sinalizar viabilidade de investimento para futuros investidores. Além disso, empreendedores esperam que crowdinvestors sejam engajados e ajudem tanto a promover o negócio como a dar feedback. Crowdfunding também possibilita que empreendedores mantenham o poder de decisão sobre a empresa mais facilmente se comparado a outras fontes tradicionais de financiamento. As descobertas indicam que crowdfunding atrai empreendedores que não conseguiriam arrecadar investimentos a partir de outras fontes de capital assim como empreendedores que entendem os benefícios adicionais que esta oferece em relação à outras fontes.

The consequences of the culture aspect and the power distance in the execution of global strategies in multinational companies in Brazil

One of the challenges presented by the current conjecture in Global Companies is to recognize and understand that the culture and levels in structure of the Power Distance in Organizations in different countries contribute, significantly, toward the failure or success of their strategies. The alignment between the implementation and execution of new strategies for projects intended for the success of the Organization as a whole, rather than as an individual part thereof, is an important step towards reducing the impacts of Power Distance (PDI) on the success of business strategies. A position at odds with this understanding by Companies creates boundaries that increase organizational chasms, also taking into consideration relevant aspects such as, FSAs (Firm-Specific Advantages) and CSAs (Country-Specific Advantages). It is also important that the Organizations based in countries or regions of low Power Distance (PDI) between its individuals be more flexible and prepared to ask and to hear the suggestions from Regional and Local Offices. Thus, the purpose of this study is to highlight the elements of effective strategy implementation considering the relevant aspects at all levels of global corporate culture that justify the influences of power distance when implementing new strategies and also to minimize the impacts of this internal business relationship. This study also recognizes that other corporate and cultural aspects are relevant for the success of business strategies so consider, for instance, the lack of alignment between global and regional/local organizations, the need for competent leadership resources, as well as the challenges that indicate the distance between the hierarchical levels ─ Headquarters and Regional Office ─ as some of the various causes that prevent the successful execution of global strategies. Finally, we show that the execution of the strategy cannot be treated as a construction solely created by the Headquarters or by only one Board and that it needs to be understood as a system aimed at interacting with the surroundings.

Qualitative characteristics of meat from confined crossbred heifers fed with lipid sources

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Physiological quality of soybean and wheat seeds produced with alternative potassium sources

O uso de fontes não convencionais para fornecimento de K às plantas tem sido amplamente estudado, mas os efeitos de materiais alternativos na qualidade fisiológica das sementes não são conhecidos. Este estudo teve como objetivo avaliar a qualidade fisiológica de sementes de soja e trigo em função da aplicação fontes de potássio em uma sucessão de culturas. O delineamento experimental foi o de blocos ao acaso com quatro repetições. Os tratamentos constaram de três fontes de K (KCl, rocha alcalina e fonolito moído, com 58%, 11% e 8.42% de K2O, respectivamente) aplicados em quatro doses (0, 25, 50 e 100 kg K2O ha-1). As doses de potássio foram aplicadas na soja e seu efeito residual foi avaliado na cultura do trigo, cultivado em sucessão. Logo após a colheita, as sementes de soja e trigo foram avaliadas pelos testes de teor de água, massa de sementes, germinação, primeira contagem, condutividade elétrica, comprimento de plântulas e massa da matéria seca de plântulas. Plantas de soja adubadas com fontes alternativas para fornecimento de K produzem sementes com maior massa e menor permeabilidade de membranas comparado às com KCl; maior qualidade fisiológica de sementes de soja e massa de sementes de trigo são obtidas com maiores doses de K2O independente da fonte.

Production and action pattern of inulinase from Aspergillus Niger-245: hydrolysis of inulin from several sources

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Electrocatalysis of oxidation of hydrogen on platinum ordered intermetallic phases: Kinetic and mechanistic studies

An experimentally based kinetic and mechanistic study of the hydrogen oxidation reaction (HOR) on platinum and platinum ordered intermetallic materials in acid medium is presented. RDE kinetic data were re-evaluated and complemented by Tafel plots obtained from chronoamperometric measurements. Among the materials evaluated, PtSb and PtSn exhibited markedly improved kinetic current densities and exchange current densities, compared to Pt in the same experimental conditions. It is proposed that the intermetallic phase enhanced the adsorptive characteristic of the surface sites and, as a consequence, improved the kinetics of the adsorption steps (Tafel or Heyrovsky) of the mechanism involved. (c) 2006 Published by Elsevier B.V.

Simulation Tools of DC-DC Converters for Power Electronics Education

This paper presents interactive simulation tools to support the enhancement of power electronics education considering DC to DC converters. These interactive tools make use of the benefits of Java language to provide a dynamic and interactive visualization of simulations in steady-state for idealized non-isolated DC to DC converters. Additionally, this paper discusses the features and the usage of the interactive educational tools to serve as a first design tool for the laboratory experiments in the power electronics courses. In this way, some results were confronted with a well-known simulator package and with experimental results in order to validate the developed interactive simulation tools.

Chaos control of a nonlinear oscillator with shape memory alloy using an optimal linear control: Part II: Nonideal energy source

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Dependence on composition of electronic properties and stability of Pt-Fe/C catalysts for oxygen reduction

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Surface structure and electronic properties of Pt-Fe/C nanocatalysts and their relation with catalytic activity for oxygen reduction

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Development and testing of anode-supported solid oxide fuel cells with slurry-coated electrolyte and cathode

A laboratory setup was designed and put into operation for the development of solid oxide fuel cells (SOFCs). The whole project consisted of the preparation of the component materials: anode, cathode and electrolyte, and the buildup of a hydrogen leaking-free sample chamber with platinum leads and current collectors for measuring the electrochemical properties of single SOFCs. Several anode-supported single SOFCs of the type (ZrO(2):Y(2)O(3)+NiO) thick anode/(ZrO(2):Y(2)O(3)) thin electrolyte/(La(0.65)Sr(0.35)MnO(3)+ZrO(2):Y(2)O(3)) thin cathode have been prepared and tested at 700 and 800 degrees C after in situ H(2) anode reduction. The main results show that the slurry-coating method resulted in single-cells with good reproducibility and reasonable performance, suggesting that this method can be considered for fabrication of SOFCs. (c) 2005 Elsevier B.V. All rights reserved.

Study of alternative schemes for the parameterization step of the continuation power flow method based on physical parameters, part II: Performance evaluation

New parameterization schemes have been proposed by the authors in Part I of this paper. In this part these new options for the parameterization of power flow equations are tested, namely, the total power losses (real and reactive), the power at the slack bus (real or reactive), the reactive power at generation buses, and the transmission line power losses (real and reactive). These different parameterization schemes can be used to obtain the maximum loading point without ill-conditioning problems, once the singularity of Jacobian matrix is avoided. The results obtained with the new approach for the IEEE test systems (14, 30, 57, and 118 buses) show that the characteristics of the conventional method are not only preserved but also improved. In addition, it is shown that the proposed method and the conventional one can be switched during the tracing of PV curves to determine, with few iterations, all points of the PV curve. Several tests were also carried out to compare the performance of the proposed parameterization schemes for the continuation power flow method with the use of both the secant and tangent predictors.