Comparing reading processes on e-ink displays and print

E-book reading devices open new possibilities in the field of reading. More activities than just reading a book can be performed with a single electronic device. For a long time, electronic reading devices have not been favored because their active LCD displays used to have a relatively low contrast. The new generation of electronic reading devices differs from earlier ones in the nature of the display: active LCD displays have been replaced with displays based on e-ink technology, which has display properties closer to that of printed paper. Moreover, e-ink technology has higher power efficiency, thereby increasing battery life and reducing weight. At first sight, the display looks similar to paper print, but the question remains whether the reading behavior also is equal to that of reading a printed book. In the present study, we analyzed and compared reading behavior on e-reader displays and on printed paper. The results suggest that the reading behavior on e-readers is indeed very similar to the reading behavior on print. Participants shared similar proportions of regressive saccades while reading on e-readers and print. Significant differences in fixation duration suggest that e-readers, in some situations, may even provide better legibility.

Elemental Anisotropic Growth and Atomic-Scale Structure of Shape-Controlled Octahedral Pt–Ni–Co Alloy Nanocatalysts

Multimetallic shape-controlled nanoparticles offer great opportunities to tune the activity, selectivity, and stability of electrocatalytic surface reactions. However, in many cases, our synthetic control over particle size, composition, and shape is limited requiring trial and error. Deeper atomic-scale insight in the particle formation process would enable more rational syntheses. Here we exemplify this using a family of trimetallic PtNiCo nanooctahedra obtained via a low-temperature, surfactant-free solvothermal synthesis. We analyze the competition between Ni and Co precursors under coreduction “one-step” conditions when the Ni reduction rates prevailed. To tune the Co reduction rate and final content, we develop a “two-step” route and track the evolution of the composition and morphology of the particles at the atomic scale. To achieve this, scanning transmission electron microscopy and energy dispersive X-ray elemental mapping techniques are used. We provide evidence of a heterogeneous element distribution caused by element-specific anisotropic growth and create octahedral nanoparticles with tailored atomic composition like Pt1.5M, PtM, and PtM1.5 (M = Ni + Co). These trimetallic electrocatalysts have been tested toward the oxygen reduction reaction (ORR), showing a greatly enhanced mass activity related to commercial Pt/C and less activity loss than binary PtNi and PtCo after 4000 potential cycles.

How monuments shape urban identity

Monuments in our society commemorate historical events, acts or heroes, and educate people about them. Monuments are landmarks that stand out from other buildings to give the city identity and order. This thesis asks how a monument can be designed to project a clear image at a distance and articulate a spatial experience at close range. Two important monuments that form part of the life of America serve as examples: (1) The Statue of Liberty, in the New York Harbor, that has become the visual icon of New York if not the nation and (2) The Holocaust Memorial in Miami Beach, Florida, that leads the visitor through a poignant experience at close range. The second part of the thesis is the design of a monument and museum for The Port of Miami, as part of the Port Boulevard Enhancement Project, sponsored by the Florida Foreign Trade Association, to celebrate the trade pioneers who helped Miami-Dade County achieve its prominence. The site for the monument is located at Biscayne Boulevard and Fifth Street, between Bayside Market Place and The American Airlines Arena in downtown Miami, at the Biscayne Bay.

Book review: Laurel Kamada, Hybrid Identities and Adolescent Girls: Being Half in Japan. Bristol: Multilingual Matters, 2010

Arguably, the catalyst for the best research studies using social analysis of discourse is personal ‘lived’ experience. This is certainly the case for Kamada, who, as a white American woman with a Japanese spouse, had to deal first hand with the racialization of her son. Like many other mixed-ethnic parents, she experienced the shock and disap-pointment of finding her child being racialized as ‘Chinese’ in America through peer group taunts, and constituted as gaijin (a foreigner) in his own homeland of Japan. As a member of an e-list of the (Japan) Bilingualism Special Interest Group (BSIG), Kamada learnt that other parents from the English-speaking foreign community in Japan had similar disturbing stories to tell of their mixed-ethnic children who, upon entering the Japanese school system, were mocked, bullied and marginalized by their peers. She men-tions a pervasive Japanese proverb which warns of diversity or difference getting squashed: ‘The nail that sticks up gets hammered down’. This imperative to conform to Japanese behavioural and discursive norms prompted Kamada’s quest to investigate the impact of ‘otherization’ on the identities of children of mixed parentage. In this fascinat-ing book, she shows that this pressure to conform is balanced by a corresponding cele-bration of ‘hybrid’ or mixed identities. The children in her study are also able to negotiate their identities positively as they come to terms with contradictory discursive notions of ‘Japaneseness’, ‘whiteness’ and ‘halfness/doubleness’.The discursive construction of identity has become a central concern amongst researchers across a wide range of academic disciplines within the humanities and the social sciences, and most existing work either concentrates on a specific identity cate-gory, such as gender, sexuality or national identity, or else offers a broader discussion of how identity is theorized. Kamada’s book is refreshing because it crosses the usual boundaries and offers divergent insights on identity in a number of ways. First, using the term ‘ethno-gendering’, she examines the ways in which six mixed-ethnic girls living in Japan accomplish and manage the relationship between their gender and ethnic ‘differ-ences’ from age 12 to 15. She analyses in close detail how their actions or displays within certain situated interactions might come into conflict with how they are seen or constituted by others. Second, Kamada’s study builds on contemporary writing on the benefits of hybridity where identities are fluid, flexible and indeterminate, and which contest the usual monolithic distinctions of gender, ethnicity, class, etc. Here, Kamada carves out an original space for her findings. While scholars have often investigated changing identities and language practices of young people who have been geographi-cally displaced and are newcomers to the local language, Kamada’s participants were all born and brought up in Japan, were fluent in Japanese and were relatively proficient in English. Third, the author refuses to conceptualize or theorize identity from a single given viewpoint in preference to others, but in postmodernist spirit draws upon multiple perspectives and frameworks of discourse analysis in order to create different forms of knowledge and understandings of her subject. Drawing on this ‘multi-perspectival’ approach, Kamada examines grammatical, lexical, rhetorical and interactional features from six extensive conversations, to show how her participants position their diverse identities in relation to their friends, to the researcher and to the outside world. Kamada’s study is driven by three clear aims. The first is to find out ‘whether there are any tensions and dilemmas in the ways adolescent girls of Japanese and “white” mixed parentage in Japan identify themselves in terms of ethnicity’. In Chapter 4, she shows how the girls indeed felt that they stood out as different and consequently experienced isolation, marginalization and bullying at school – although they were able to make better sense of this as they grew older, repositioning the bullies as pitiable. The second aim is to ask how, if at all, her participants celebrate their ethnicity, and furthermore, what kind of symbolic, linguistic and social capital they were able to claim for themselves on the basis of their hybrid identities. In Chapter 5, Kamada shows how the girls over time were able to constitute themselves as insiders while constituting ‘the Japanese’ as outsiders, and their network of mixed-ethnic friends was a key means to achieve this. In Chapter 6, the author develops this potential celebration of the girls’ mixed ethnicity by investigating the privileges they perceived it afforded them – for example, having the advantage of pos-sessing English proficiency and intercultural ‘savvy’ in a globalized world. Kamada’s third aim is to ask how her participants positioned themselves and performed their hybrid identities on the basis of their constituted appearance: that is, how the girls saw them-selves based on how they looked to others. In Chapter 7, the author shows that, while there are competing discourses at work, the girls are able to take up empowering positions within a discourse of ‘foreigner attractiveness’ or ‘a white-Western female beauty’ discourse, which provides them with a certain cachet among their Japanese peers. Throughout the book, Kamada adopts a highly self-reflexive perspective of her own position as author. For example, she interrogates the fact that she may have changed the lived reality of her six participants during the course of her research study. As the six girls, who were ‘best friends’, lived in different parts of the Morita region of Japan, she had to be proactive in organizing six separate ‘get-togethers’ through the course of her three-year study. She acknowledges that she did not collect ‘naturally occurring data’ but rather co-constructed opportunities for the girls to meet and talk on a regular basis. At these meetings, she encouraged the girls to discuss matters of identity, prompted by open-ended interview questions, by stimulus materials such as photos, articles and pic-tures, and by individual tasks such as drawing self-portraits. By giving her participants a platform in this way, Kamada not only elicited some very rich spoken data but also ‘helped in some way to shape the attitudes and self-images of the girls positively, in ways that might not have developed had these get-togethers not occurred’ (p. 221). While the data she gathers are indeed rich, it may well be asked whether there is a mismatch between the girls’ frank and engaging accounts of personal experience, and the social constructionist academic register in which these are later re-articulated. When Kamada writes, ‘Rina related how within the more narrow range of discourses that she had to draw on in her past, she was disempowered and marginalized’ (p. 118), we know that Rina’s actual words were very different. Would she really recognize, understand and agree with the reported speech of the researcher? This small omission of self-reflexivity apart – an omission which is true of most lin-guistic ethnography conducted today – Kamada has written a unique, engaging and thought-provoking book which offers a model to future discourse analysts investigating hybrid identities. The idea that speakers can draw upon competing discourses or reper-toires to constitute their identities in contrasting, creative and positive ways provides linguistic researchers with a clear orientation by which to analyse the contradictions of identity construction as they occur across time in different discursive contexts

Theoretical and experimental study on electron interactions with chlorobenzene: Shape resonances and differential cross sections

In this work, we report theoretical and experimental cross sections for elastic scattering of electrons by chlorobenzene (ClB). The theoretical integral and differential cross sections (DCSs) were obtained with the Schwinger multichannel method implemented with pseudopotentials (SMCPP) and the independent atom method with screening corrected additivity rule (IAM-SCAR). The calculations with the SMCPP method were done in the static-exchange (SE) approximation, for energies above 12 eV, and in the static-exchange plus polarization approximation, for energies up to 12 eV. The calculations with the IAM-SCAR method covered energies up to 500 eV. The experimental differential cross sections were obtained in the high resolution electron energy loss spectrometer VG-SEELS 400, in Lisbon, for electron energies from 8.0 eV to 50 eV and angular range from 7 degrees to 110 degrees. From the present theoretical integral cross section (ICS) we discuss the low-energy shape-resonances present in chlorobenzene and compare our computed resonance spectra with available electron transmission spectroscopy data present in the literature. Since there is no other work in the literature reporting differential cross sections for this molecule, we compare our theoretical and experimental DCSs with experimental data available for the parent molecule benzene. Published by AIP Publishing.

An allometric modelling approach to identify the optimal body shape sssociated with, and differences between brazilian and peruvian youth motor performance

Children fromdevelopedanddevelopingcountriesdifferintheirbodysizeandshapedueto markeddifferencesacrosstheirlifehistorycausedbysocial,economicandculturaldifferenceswhicharealsolinkedtotheirmotorperformance(MP).Weusedallometricmodelsto identifysize/shapecharacteristicsassociatedwithMPtestsbetweenBrazilianandPeruvianschoolchildren.Atotalof4,560subjects,2,385girlsand2,175boysaged9–15years werestudied.Heightandweightweremeasured;biological maturation wasestimated with thematurityoffsettechnique;MPmeasuresincludedthe12minuterun(12MR),handgrip strength(HG),standinglongjump(SLJ)andtheshuttlerunspeed(SR)tests;physicalactivity(PA)wasassessedusingtheBaeckequestionnaire.Amultiplicativeallometricmodel wasadoptedtoadjustforbodysizedifferencesacrosscountries.Reciprocalponderalindex (RPI)wasfoundtobethemostsuitablebodyshapeindicatorassociatedwiththe12MR, SLJ,HGandSRperformance.Apositivematurationoffset parameterwasalsoassociated withabetterperformanceinSLJ,HGandSRtests.Sexdifferenceswerefoundinallmotor tests.BrazilianyouthshowedbetterscoresinMPthantheirPeruvianpeers,evenwhen controlling fortheirbodysizedifferencesThecurrentstudyidentifiedthekeybodysize associatedwithfourbodymass-dependentMPtests.Biological maturationandPAwere associatedwithstrengthandmotorperformance.Sexdifferenceswerefoundinallmotor tests,aswellasacrosscountriesfavoringBrazilianchildrenevenwhenaccountingfortheir bodysize/shapedifferences.

An allometric modelling approach to identify the optimal body shape associated with, and differences between brazilian and peruvian youth motor performance

Children fromdevelopedanddevelopingcountriesdifferintheirbodysizeandshapedueto markeddifferencesacrosstheirlifehistorycausedbysocial,economicandculturaldifferenceswhicharealsolinkedtotheirmotorperformance(MP).Weusedallometricmodelsto identifysize/shapecharacteristicsassociatedwithMPtestsbetweenBrazilianandPeruvianschoolchildren.Atotalof4,560subjects,2,385girlsand2,175boysaged9–15years werestudied.Heightandweightweremeasured;biological maturation wasestimated with thematurityoffsettechnique;MPmeasuresincludedthe12minuterun(12MR),handgrip strength(HG),standinglongjump(SLJ)andtheshuttlerunspeed(SR)tests;physicalactivity(PA)wasassessedusingtheBaeckequestionnaire.Amultiplicativeallometricmodel wasadoptedtoadjustforbodysizedifferencesacrosscountries.Reciprocalponderalindex (RPI)wasfoundtobethemostsuitablebodyshapeindicatorassociatedwiththe12MR, SLJ,HGandSRperformance.Apositivematurationoffset parameterwasalsoassociated withabetterperformanceinSLJ,HGandSRtests.Sexdifferenceswerefoundinallmotor tests.BrazilianyouthshowedbetterscoresinMPthantheirPeruvianpeers,evenwhen controlling fortheirbodysizedifferencesThecurrentstudyidentifiedthekeybodysize associatedwithfourbodymass-dependentMPtests.Biological maturationandPAwere associatedwithstrengthandmotorperformance.Sexdifferenceswerefoundinallmotor tests,aswellasacrosscountriesfavoringBrazilianchildrenevenwhenaccountingfortheir bodysize/shapedifferences.

Adsorption of pesticides onto activated carbons from wood composites

A series of activated carbon was produced from particleboard and medium-density fibreboard monoliths, which are waste originated from the industry, and then characterized and evaluated for potential application for phenoxyacetic acids removals, such 2,4-dichlorophenoxyacetic acid (2,4-D), 2-methyl-4-chlorophenoxy acetic acid (MCPA) and 3-(3,4-dichlorophenyl)-1,1-dimethylurea (diuron), from the liquid phase. All AC retain the shape of the precursor, and displays a microporous structure well-developed, reaching 0.58 cm 3 g -1. The adsorption isotherms for three pesticides were obtained in the optimal conditions and the AC with high superficial area and micropore volume exhibited better performance, allowing to state that, this AC could be a great substitute of those habitually used for this purpose. The pesticides adsorption data were linearized using the Langmuir and Freundlich equation, being the first a very good fit to the experimental data.

Adsorption of pesticides onto activated carbons from wood composites

A series of activated carbon was produced from particleboard and medium-density fibreboard monoliths, which are waste originated from the industry, and then characterized and evaluated for potential application for phenoxyacetic acids removals, such 2,4-dichlorophenoxyacetic acid (2,4-D), 2-methyl-4-chlorophenoxy acetic acid (MCPA) and 3-(3,4-dichlorophenyl)-1,1-dimethylurea (diuron), from the liquid phase. All AC retain the shape of the precursor, and displays a microporous structure well-developed, reaching 0.58 cm 3 g -1. The adsorption isotherms for three pesticides were obtained in the optimal conditions and the AC with high superficial area and micropore volume exhibited better performance, allowing to state that, this AC could be a great substitute of those habitually used for this purpose. The pesticides adsorption data were linearized using the Langmuir and Freundlich equation, being the first a very good fit to the experimental data.

How do medium naturalness and personality traits shape academic achievement and perceived learning? An experimental study of face-to-face and synchronous e-learning

This controlled experiment examined how academic achievement and cognitive, emotional and social aspects of perceived learning are affected by the level of medium naturalness (face-to-face, one-way and two-way videoconferencing) and by learners’ personality traits (extroversion–introversion and emotional stability–neuroticism). The Media Naturalness Theory explains the degree of medium naturalness by comparing its characteristics to face-to-face communication, considered to be the most natural form of communication. A total of 76 participants were randomly assigned to three experimental conditions: face-to-face, one-way and two-way videoconferencing. E-learning conditions were conducted through Zoom videoconferencing, which enables natural and spontaneous communication. Findings shed light on the trade-off involved in media naturalness: one-way videoconferencing, the less natural learning condition, enhanced the cognitive aspect of perceived learning but compromised the emotional and social aspects. Regarding the impact of personality, neurotic students tended to enjoy and succeed more in face-to-face learning, whereas emotionally stable students enjoyed and succeeded in all of the learning conditions. Extroverts tended to enjoy more natural learning environments but had lower achievements in these conditions. In accordance with the ‘poor get richer’ principle, introverts enjoyed environments with a low level of medium naturalness. However, they remained focused and had higher achievements in the face-to-face learning.

Nuclear shape instability caused by lamin A deregulation promotes invasiveness in pediatric bone sarcomas: from nucleo-cytoskeleton dynamics to novel therapeutic opportunities

Osteosarcoma (OS) and Ewing sarcoma (EWS) are the two most frequent primary bone tumors, in which metastases remain the most relevant adverse prognostic factor. Lamin A is the main constituent of the nuclear lamina, with a fundamental role in maintaining the connection between nucleus and cytoskeleton (through LINC complex proteins interactions), and its alterations can be implicated in tumor progression. We investigated how nucleo-cytoskeleton dynamics is influenced by lamin A modulation in OS and EWS, demonstrating that both these cancer models had low levels of lamin A, which are linked to a significantly more marked nuclear misshaping. In our in vitro studies, reduced levels of lamin A promoted migratory abilities in these tumors. Moreover, these findings were corroborated by gene expression analyses on EWS patient samples, showing that LMNA levels were significantly lower in metastatic lesions compared to primary tumors and that patients with low LMNA had a significant worse overall survival. We also found that LMNA expression significantly impaired EWS metastases formation in vivo. We demonstrated that low lamin A expression was linked to a severe mislocalization of LINC complex proteins, thus disrupting nucleo-cytoskeleton interactions, with a corresponding gain in malignant properties, which resulted in increased invasiveness. Lamin A overexpression or its accumulation by a statin-based pharmacological treatment allowed us to reconstitute a functional nucleo-cytoskeleton interplay, which resulted in significant downmodulation of ROCK2 and YAP, two crucial drivers of EWS aggressiveness. Our study demonstrated that lamin A is a favorable mediator of nuclear shape stability in bone sarcomas, and its modulation rescues LINC complex protein localization and regulates mechano-signaling pathways, thus promoting a less aggressive cancer phenotype. We also identified statins, already employed in clinical practice, as a tool capable to increase lamin A levels, and to reconstitute functional nucleo-cytoskeletal dynamics, resulting in reduced cellular migration.

Different dietary fibres included in the gestation and lactation diet shape sow's microbiota, modify colostrum and milk composition and affect piglet growth and health

This thesis reports three experimental studies that may contribute to understand how the sources or types of dietary fibres (DFs) included in sow diet with similar level of total DFs influence the composition of colostrum and milk and their related effects on offspring performance and gut microbiota. The first study showed that decreasing the level of hemicelluloses (HCs) in sow’s lactation diet increased the proportion of butyrate and the concentration of volatile fatty acids (VFAs), copper and threonine in milk. Simultaneously, the post-weaning growth of low birthweight piglets was improved, and the diarrhoea occurrence was reduced during the second week post-weaning. The second study showed that the level of HCs in the diet of lactating sows affected their faecal microbiota, modified the VFA profile in sow’s faeces during lactation and barely impacted the faecal microbiota of slow and fast growing piglets. The third study showed that replacing a source soluble DFs by one of insoluble DFs in sow’s diet during late gestation and lactation reduced farrowing duration, increased total VFAs and lactoferrin concentrations in colostrum, improved growth performance from birth to 1 day of lactation, during the post-weaning period and throughout the study, and reduced diarrhoea occurrence during the first week post-weaning. Finally, a fourth study proposed a workflow to analyse low biomass samples from the umbilical cord blood aiming at investigating the existence of a pre-birth microbiota with no substantial findings to confirm this hypothesis. Overall, the results of these studies confirmed that, besides the level of DFs, the sources, and the types of DFs included in the sow's diet shape the sow's microbiota, influence the composition of colostrum and milk, and improve offspring performance, but with limited impacts on the microbiota of piglets.

A Trans-dimensional inversion algorithm to model deformation sources with unconstrained shape in finite element domains

Ground deformation provides valuable insights on subsurface processes with pattens reflecting the characteristics of the source at depth. In active volcanic sites displacements can be observed in unrest phases; therefore, a correct interpretation is essential to assess the hazard potential. Inverse modeling is employed to obtain quantitative estimates of parameters describing the source. However, despite the robustness of the available approaches, a realistic imaging of these reservoirs is still challenging. While analytical models return quick but simplistic results, assuming an isotropic and elastic crust, more sophisticated numerical models, accounting for the effects of topographic loads, crust inelasticity and structural discontinuities, require much higher computational effort and information about the crust rheology may be challenging to infer. All these approaches are based on a-priori source shape constraints, influencing the solution reliability. In this thesis, we present a new approach aimed at overcoming the aforementioned limitations, modeling sources free of a-priori shape constraints with the advantages of FEM simulations, but with a cost-efficient procedure. The source is represented as an assembly of elementary units, consisting in cubic elements of a regular FE mesh loaded with a unitary stress tensors. The surface response due to each of the six stress tensor components is computed and linearly combined to obtain the total displacement field. In this way, the source can assume potentially any shape. Our tests prove the equivalence of the deformation fields due to our assembly and that of corresponding cavities with uniform boundary pressure. Our ability to simulate pressurized cavities in a continuum domain permits to pre-compute surface responses, avoiding remeshing. A Bayesian trans-dimensional inversion algorithm implementing this strategy is developed. 3D Voronoi cells are used to sample the model domain, selecting the elementary units contributing to the source solution and those remaining inactive as part of the crust.

Pulse shape studies of neutral particles with a liquid scintillator

The hadrontherapy exploits beams of charged particles against deep cancers. These ions have a depth-dose profile in which there is a little release of energy at the beginning of their path, whereas there is a sharp maximum, the Bragg Peak, near its end path. However, if heavy ions are used, the fragmentation of the projectile can happen and the fragments can release some dose outside the treatment volume beyond the Bragg peak. The fragmentation process takes place also when the Galactic Cosmic Rays at high energy hit the spaceship during space missions. In both cases some neutrons can be produced and if they interact with the absorbing materials nuclei some secondary particles are generated which can release energy. For this reason, studies about the cross section measurements of the fragments generated during the collisions of heavy ions against the tissues nuclei are very important. In this context, the FragmentatiOn Of Target (FOOT) experiment was born, and aims at measuring the differential and double differential fragmentation cross sections for different kinetic energies relevant to hadrontherapy and space radioprotection with high accuracy. Since during fragmentation processes also neutrons are produced, tests of a neutron detection system are ongoing. In particular, recently a neutron detector made up of a liquid organic scintillator, BC-501A with neutrons/gammas discrimination capability was studied, and it represents the core of this thesis. More in details, an analysis of the data collected at the GSI laboratory, in Darmstadt, Germany, is effectuated which consists in discriminating neutral and charged particles and then to separate neutrons from gammas. From this analysis, a preliminary energy-differential reaction cross-section for the production of neutrons in the 16O + (C_2H_4)_(n) and 16O + C reactions was estimated.

Enhanced switchgear connection testing through augmented reality: early developments

Augmented reality is an emerging field of interactive design in which virtual material is seamlessly blended with displays of real world environments. The tremendous potential of augmented reality has begun to be explored with the emergence of personal mobile devices capable of constructing engaging augmented reality experiences. This work is part of a project aiming at using augmented reality goggles to bring advance information to the user interacting with switch-gear during automation cabling. In particular we will be focusing on the recognition and definition of the figures of the component on the AR device. In this part we are using standard camera that allows us to get real images and helps us to localize the gearbox in space through ARUCO marker and we can exploit in order to re-project the actual shape of the component that are currently interested in manipulation by exploiting the data provided by the database. The experiments are carried out using the camera to get the images of the real world switch-gear and re-project those images with the component superimposed on it. Using transforms of the database we did localization to re-project the rendered image of component exactly on the real world component, which can be further integrated in AR goggles to see the component superimposed in real-time.