Cadeia produtiva da nêspera na região do alto Tietê: indicadores econômicos da produção e mercado atacadista

A região do Alto Tietê é responsável por 85% da produção de nêspera do Estado de São Paulo. Atividade rentável, nos últimos anos os produtores verificaram uma queda na sua lucratividade. Este trabalho teve como objetivos sistematizar informações econômicas sobre a cadeia produtiva e analisar a estrutura de mercado. A evolução dos preços da nêspera mostra crescimento até o ano 2000 e posterior queda. O mercado atacadista tem atuado como um colchão amortecedor. O maior desafio para os produtores de nêspera se encontra no âmbito organizacional. A estrutura de mercado e os resultados da pesquisa de campo indicam que os produtores do Alto Tietê encontram-se em posição vantajosa para um reposicionamento nesse aspecto, importante para uma participação sustentável na atividade.

Proposta conceitual de colhedoras autopropelidas de açaí (Euterpe oleracea Mart.) para a região amazônica

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeitos do thidiazuron e do ácido giberélico nas características dos cachos de uva de mesa cultivar Rubi, na região da Nova Alta Paulista

Com o objetivo de avaliar os efeitos de thidiazuron e de ácido giberélico nas características dos cachos de uvas 'Rubi', foi conduzido um experimento, utilizando-se de thidiazuron a 5 e 10 mg.L-1 e ácido giberélico a 20mg.L-1, combinados ou não. As aplicações dos produtos foram realizadas aos 14; 21 ou 28 dias após o pleno florescimento, por meio de imersão dos cachos. Todos os tratamentos com reguladores de crescimento aumentaram a massa dos cachos. A massa dos bagos e dos engaços foi identicamente influenciada pela aplicação dos produtos, porém menos evidente, quando as aplicações foram realizadas aos 28 dias após o pleno florescimento. As aplicações de thidiazuron a 5mg.L-1, aos 14 ou 21 dias após o florescimento, não diferiram das aplicações de ácido giberélico para as variáveis estudadas. Não houve diferenças significativas para as variáveis teor de sólidos solúveis totais, acidez titulável, porém os tratamentos com thidiazuron retardaram a maturação em até 7 dias.

Características físicas e acúmulo de nutrientes pelos cachos de 'niagara rosada' em vinhedos na região de Jundiaí

Este trabalho teve por objetivo realizar um levantamento em 40 vinhedos de 'Niagara Rosada' nos municípios de Jundiaí e Louveira-SP, sendo metade sobre o porta-enxerto 'Ripária do Traviú' e outra sobre o 'IAC 766'. Determinaram-se, em cada vinhedo, a produtividade, a duração do ciclo, o número de cachos e de ramos produtivos por planta, as características físicas dos cachos e bagas, e o acúmulo de nutrientes pelos cachos. Avaliaram-se nos cachos amostrados a massa da matéria fresca, o comprimento e a largura dos cachos e baga, e diâmetro do pedicelo. Os cachos de cada vinhedo amostrado foram secos em estufa e posteriormente submetidos à análise química para determinar os teores de macro e micronutrientes, visando a estimar o acúmulo de nutrientes por tonelada de uva. Constatou-se um comportamento semelhante entre os porta-enxertos para os dados de produtividade, duração do ciclo, número de cachos e ramos produtivos, sendo de, respectivamente, 11.100kg ha-1, 134 dias, 13 cachos e 9 ramos produtivos. Quanto às características físicas, os valores médios da massa da matéria fresca, comprimento e largura dos cachos foram de, respectivamente, 209g, 12 e 6,8cm; massa da matéria fresca, comprimento e largura das bagas, e diâmetro do pedicelo de, respectivamente, 4,3g; 19,9; 18,2 e 3,2mm. Quanto ao acúmulo de nutrientes, concluiu-se que a cultivar Niagara Rosada enxertada sobre 'Ripária do Traviú' apresentou maior acúmulo de P, Fe e Zn, enquanto sobre o porta-enxerto 'IAC 766' houve maior acúmulo de Mn. em ambos os porta-enxertos, a 'Niagara Rosada' apresentou a seguinte escala de acúmulo de nutrientes em ordem decrescente: K>N>P>Ca>S>Mg>B>Fe>Mn>Cu>Zn.

Análise da Conformidade e Caracterização da Matéria- Prima Empregada na Fabricação de Blocos Cerâmicos na Região Metropolitana de Salvador

The potential market of the metropolitan area of Salvador accounts for the estimated consumption of roughly 800 million horizontally perforated extruded clay bricks a year. The growing demand of consumers along with the competitiveness of the structural ceramic sector has driven forward a number of recent efforts and investments towards improving the quality of structural ceramics. In this scenario, the present study focused on sampling and evaluating the conformity of 8-hole horizontally perforated extruded clay bricks manufactured by different plants (A, B and C) in the metropolitan area of Salvador. In addition, representative clay and sandy-clay materials were collected from each plant and characterized by conventional physical, chemical and mineralogical techniques. Finally, experimental compositions designated as A, B and C, according to the source, were prepared by mixing different contents of the raw materials collected in the plants, fired at different temperatures and characterized. The results revealed a series of non conformities regarding ABNT guidelines. The characterization of raw materials revealed the presence of kaolinite and ilite in concentrations ranging from 64 to 90 wt.% along with free quartz (10 - 25%). The sandy-clay samples consisted basically of kaolinite. All raw materials depicted low contents of organics, amorphous constituents, alkaline oxides and feldspar. An analysis of the firing behavior of all different ceramic compositions revealed that the linear contraction of composition A was rather significant considering the temperature range evaluated, and it justifies the significant dimensional non conformity that was shown by bricks made with the ceramic A

Influência da adição de rejeitos cerâmicos nas propriedades de cerâmica vermelha da região do Recôncavo Baiano

The study of the physical and mechanic properties is an analysis of unquestioned importance on the production of the ceramic materials. In the region of the Recôncavo Baiano, there are ceramic and small brick factories, that still use rudimentary techniques, where the necessity of characterization of raw materials is denounced by the quality of the final product. The present work has for objective to study the behavior of the clay proceeding from the region of the Recôncavo, between the cities of Candeias and Camaçari/Ba, with addition of 5, 10 and 15% by weight of brick scraps, trying to optimize the physic and mechanical properties of the final product, aiming a better possibility of being manufactured, mechanic resistance, low linear retraction and water absorption. The brick scraps and the clay were characterized by FRX, DRX, TG, ATD and the granulometric analysis. Samples for testing where prepared by uniaxial pressing at 25Mpa, in 60x20x5mm size. The evaluated technological properties were: linear retraction, water absorption, apparent porosity and flexural strength. The samples were burned in electric oven in the temperatures of 850º, 950º and 1050ºC and compared its mechanical properties and the gresification. With addition of 15% by weight of brick scraps and burning at 900º-1000ºC the samples showed properties superior to that clay

Estudo da formulação de massas cerâmicas provenientes da região do Seridó-RN para fabricação de telhas

This work has for objective study compared the characteristics and technological properties of ceramic bodies from the region of Seridó-RN. The region under study has identified 23 cities where they were 80 ceramics industries. To define the universe of search, there was a survey of pottery that are part of APL Seridó next to the IEL. The characteristics and operating conditions of ceramics industries of the region were identified through a socio-economic questionnaire applied locally, which addressed issues such as: profiles of companies, production process etc. The analysis of information collected from 24 companies identified in seven cities shows that the vast majority of industries is small, with family structure, obsolete equipment and labo, little qualified. Most of the pottery works with low technical knowledge, poor control of the production process and product technology. The raw collected were submitted to analysis of X ray diffraction, chemical composition, termical analysis, particle size distribution and plasticity. Then were produced five formulations and made by uniaxial pressure at 25 MPa for firing in temperatures varying from 850 to 1050 °C. The firing technological properties evaluated were: mass loss to fire, lineal shrinkage, apparent density, apparent porosity, water absorption and flexural strength (3 points). The results indicated that the raw materials from the region have significant similarities in the composition chemical and mineralogical. Furthermore, it indicates the possibility of the use of cycles of firing faster and efficient than the current, limited to some clay mass burning of certain conditions

Irrigação e certificação da cafeicultura na Região Centro-Oeste de São Paulo

An unsatisfactory profitability has led to the gradual decline of the coffee plantations in São Paulo. Among the alternatives that arise for solving this problem, two stand out: the irrigation of crops and certification of properties. Even in areas considered suitable for cultivation of arabica coffee (Coffea arabica L.), the use of irrigation can promote an increase in grain yield. In addition, the product certification promotes their differentiation in the market and can improve the economic results of the activity. This study aimed to evaluate the development and productivity of coffee crops subjected to irrigation or not, comparing economic data in the marketing of coffee certified or not, under the conditions of the mid-west region of São Paulo state. The field experimental design was in randomized blocks with two treatments (with and without drip irrigation) and ten repetitions. The costs of production and profitability by selling the final product were calculated. The irrigation increased the development and productivity of coffee. The return on investment took place after the third harvest. Irrigation combined with the sale of certified coffee provided financial balance 1,192% higher than the coffee is not irrigated and non-certified.

Estudo das variáveis de processamento das matérias-primas da região do crato - ce na fabricação de produtos cerâmicos por extrusão e por prensagem

The limits to inform is about the character stico of basic, quimica, mineralogical and mechaniques of matlaughed material used in the manufacturing process the product certified in economic region the Cariri, specifically in the city of Crato, Ceará state, motivated the development of this work, since in this region the exist ing economic context that a general appear as important in the production chains. Were made twentyfive soils-test specimen collection and the study was performed to differentiate the mat laugh materials of variaveis processing of mathing raw materials in the factory The product mica monkeys by extrusion and pressing. The results were obtained ap s as analyzes: grain size, index of plasticity, fluoresce incidence X-ray difration the X-ray, and analyzes thermicals and properties technological. through s of curves gresifica returned to was a comparison between the retro the linear, absorb to water, porosity and bulk density. the results show that the excellent distribution and character acceptable available for the processing of the structure color dark red. needing, therefore, of the mixture of a less plastic clay with thick granulation, that works as plasticity reducer. In spite of the different resignation forms for prensagem and extrusion, the characteristics of absorption of water and rupture tension the flexing was shown inside of the patterns of ABNT

Desempenho de três variedades de soja na região dos tabuleiros costeiros no estado Alagoas

The objective of this work, the performance of three varieties of soybean on "Tabuleiros Costeiros" State of Alagoas. The installation of the experiment occurred on March 20, 2006, picking up the parcels on 26 August 2006. The experimental design was a randomized blocks with seven repetitions. The experimental plots consisted of ten rows of 4.0 m in length, spaced 0.50 m. In ten plants per plot were marked certain height of the plant in full bloom stage R2 and point of harvest stage R9 considering the distance between the soil surface and apical end of the main stem, the body weight of 100 seeds, grain production and dry weight in (kg ha(-1)) which are calculated from the production harvested per plot. The soybean plants of three varieties showed height below the minimum required for mechanical harvesting. The three varieties yield or more of the traditionally producing. The average of dry matter accumulation obtained show the variety BRS Tracaja as a good option for the production of forage.

Avaliação do processo industrial da cerâmica vermelha na região do Seridó - RN

Particularly in Braziland in Rio Grande do Norte, companies manufacturing red ceramic, play an important role as agents of development to study the region Seridó- RN, specific place for carrying out the research. It is observed in this region a concentration of red ceramic industries of small size, which, despite its importance in the ceramic, they are unable to enjoy or use the new forms of administrative management and technological advances designed and offered by universities, centers of research and projects of governments, remained almost entirely outside the progress and modernization, technological and administrative. These companies still have outdated technology, and management processes, providing quality problems and standardization of end products. Upon these conditions are the companies going through crisis and struggling to survive alone and without assistance. The region of Seridó-RN, lets make a detailed case study of red ceramic companies in the region proposed from the existing theoretical and actual lifting of the condition of the product manufacturing red ceramic, allowing through this overview of the implementation of collect samples of raw materials, allowing the study of each ceramic industry that contributed to the participation of the research, which was determined parameters such as: analysis of the physical, chemical and technological properties of raw materials, characterization of the processes used, raising the technological resources considering equipment, machinery, supplies, raw materials and facilities available and its organization by type of products from companies involved in this study. The methodology consists of the following steps: collection of raw material, crushing and screening, characterization of raw materials (liquid limit, chemical analysis, mineralogical analysis, differential thermal analysis, sieve analysis), mixing, forming, cutting, drying and burning of ceramic bodies and bodies of evidence. The results showed that it was clay with distinct characteristics with respect to plasticity. With respect to the different compositions of mixtures of ceramic masses, we conclude that the ceramic properties showed a direct proportionality with increasing fraction of the clay not plastic. However, the compositions of the masses studied proved to be the most appropriate for the types of simulated clay for use in ceramics. Adopted in the ceramic processing made it possible to obtain products the resulted in consistent properties, and in some cases even exceeding the requirements of technical studies and standard-Brazilian clays to obtain ceramic products such as tiles, bricks and tiles to floor. Based on the discussions from the results obtained in the various processing steps of this work, one can draw conclusions according to the physico-chemical and mineralogical properties of raw materials, the properties of ceramic products burned and analysis. This work may be used by other researchers, private companies and governmental organizations, undergraduate students and graduate, can develop studies and future research to: develop projects to modify the furnaces; mapping projects develop and rationalize the exploitation of raw materials ;promoting reforestation and forest management; develop reduction projects and recovery of waste; develop training projects in manpower sector, and develop security projects, improving the conditions of work in the area pottery

Diversidade de Phytophthora parasitica isolados de Citrus usando seqüências de nucleotídeos da região ITS-5.8S rDNA

Realizou-se estudo para caracterização e verificação da diversidade genética de Phytophthora parasitica, agente causador da gomose dos citros. Quatorze isolados de Phytophthora parasitica, provenientes do Estado de São Paulo, foram seqüenciados a partir das regiões internas transcritas (ITS1 e ITS2) do gene 5.8S. Obtiveram-se seqüências de 812 pb a 860 pb que foram comparadas com seqüências de outras espécies de Phytophthora spp depositadas no NCBI. Foram feitos estudos filogenéticos, utilizando-se o método neighbor-joining com 1000 bootstrap e construído o dendrograma mais representativo. Obtiveram-se os resultados de 98,88% a 100% de similaridade genética entre os 14 isolados paulistas, e 99,5% a 98,8% entre estes e a seqüência de P. nicotianae (gi| 8927482) obtida do GenBank NCBI.

Estudo da viabilidade técnica do uso das argilas da região do agreste potiguar para produção de peças cerâmicas: caracterização e formulação

In recent decades, ceramic products have become indispensable to the technological development of humanity, occupying important positions in scientific production and consequently in industrial production. One area of the economy that continues to absorb large amounts of the products of this sector is Construction. Among the branches of the ceramic industry, there are the red ceramic industry which is traditionally the basis of that economic sector. Among the reasons for which the red ceramic industry became popular in the country, and specifically in Rio Grande do Norte, is the abundance of this raw material, easily found throughout the national territory. However, it appears that the red ceramic industry has deficiencies in technology and skilled labor, resulting in the production of ceramic goods with low added value. Among the factors that determine the quality of the ceramic products red has the proper formulation of the ceramic mass, the conformation and the firing temperature. Thus, the overall goal of this work is to study the mineralogical and technological properties, two clays from the region of the Wasteland Potiguar industrial ceramist. Therefore, the raw materials were characterized by analysis of Xray diffraction (XRD) analysis, X-ray fluorescence (XRF), particle size analysis (FA), scanning electron microscopy (SEM), optical microscopy (OM ), plasticity index (PI), thermal gravimetric analysis (TGA) and differential thermal analysis (DTA). The technological properties of the material were analyzed by water absorption tests (AA%) porosity (% PA), the linear shrinkage (RT%), apparent density (MEA), loss on ignition (PF%) and flexural strength three points (TRF)

Characterization of Acromyrmex subterraneus brunneus (Hymenoptera: Formicidae) young nests in a fragment of the Neotropical Forest

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação dos impactos ambientais gerados por uma industria cerâmica típica da Região do Seridó/RN

The present work deals with an evaluation of the environmental impacts arised from a typical ceramics industry located in the Seridó region of Rio Grande do Norte State. That region contains the largest State s producing basin of red ceramics. The district of Parelhas stands out as the largest producing nucleus. The studied company is located in the rural zone of Parelhas, it was selected as study object because it possesses a great part of the representative characteristics of the Region s ceramics park as a whole. Impacts produced at the implantation and operation phases of the Company had been evaluated, being this last phase subdivided in stages of the productive process. Among found adverse impacts, they are distinguished: losses in air quality, undesirable noises, microclimatic alterations, impoverishment of the ground, elimination of the vegetal covering, agricultural exodus, crisis in cattle agriculture and, superficial and underground water contamination, beyond risks ocupational diseases and industrial accidents. The Leopold s interactive matrix, that summarizes results of the work, was presented in form of 15 (fifteen) tables that display impacts classified in qualitative and quantitative way. Totally, 175 (one hundred and seventy-five) significant impacts produced by this Company had been identified, being 114 (one hundred and fourteen) negative, 38 (thirty-eight) positive and 23 (twenty-three) among mixed, indefinite and inert ones. In the work, before the evaluation of impacts properly said, it was constructed a diagnostic table of the ambient situation at a previous moment to implantation of the Company, elaborated on basis of inferences and historical researches. It was proposed still, mitigative steps for adverse impacts identified, as also elaborated a program to accompaniment and observing that the fulfilment of indicated mitigative steps guarantees. The final part of the work contemplates conclusions and suggestions that aim to influence positively the presented sight in terms of environmental management